Control of Intermolecular Interactions toward the Production of Free-Standing Interfacial Polydopamine Films.

Aggregation of the polydopamine (PDA) molecular building blocks at the air/water interface leads to obtaining large surface nanometric-thin films. This mechanism follows two possible pathways, namely, covalent or non-covalent self-assembly, which result in a different degree of structure order and, consequently, different structural properties. Control of this mechanism could be vital for applications that require true self-support PDA free-standing films, for example, electrochemical sensing or membrane technology. Here, we are considering the impact of boric acid (BA) and Cu2+ ions on the mentioned mechanism exclusively for the free-standing films from the air/water interface. We have employed and refined our own spectroscopic reflectometry method to achieve an exceptionally high real-time control over the thickness growth. It turned out that BA and Cu2+ ions significantly impact the film growth process. Reduction of the nanoparticles size and their number was examined via UV-vis spectroscopy and transmission electron microscopy, showing a colossal reduction in the mean diameter of nanoparticles in the case of BA and a moderate reduction in the case of Cu2+. This modification is leading to significant enhancement of the process efficiency through moderation of the topological properties of the films, as revealed by atomic force microscopy. Next, applying infrared, Raman, and X-ray photoelectron spectroscopy, we presented small amounts of metal (B or Cu) in the final structure of PDA and simultaneously their vital role in the oxidation mechanism and cross-linking through covalent or non-covalent bonds. Therefore, we revealed the possibility of synthesizing films via the expected self-assembly mechanism which has hitherto been out of control. Moreover, modification of mechanical properties toward exceptionally elastic films through the BA-assisted synthesis pathway was shown by achieving Young's modulus value up to 24.1 ± 5.6 and 18.3 ± 6.4 GPa, using nanoindentation and Brillouin light scattering, respectively.

Size-dependent nanoscale soldering of polystyrene colloidal crystals by supercritical fluids.

HYPOTHESIS: Polymer particles self-assembled into colloidal crystals have exciting applications in photonics, phononics, templates for nanolithography, and coatings. Cold soldering utilizing polymer plasticization by supercritical fluids enables a novel, low-cost, low-effort, chemical-free means for uniform mechanical strengthening of fragile polymer colloidal crystals at moderate temperatures. Here, we aim to elucidate the role of particle size and gas-specific response for the most efficient soldering, exploring the full potential of this method. EXPERIMENTS: We investigate the elastic properties of polystyrene colloidal crystals made of nanoparticles with different diameters (143 to 830 nm) upon treatment with supercritical Ar and He at room temperature. By employing Brillouin light scattering, we quantify the effect of nanoparticle size on the strengthening of interparticle contacts, evaluating the permanent change in the effective elastic modulus upon cold soldering. FINDINGS: The relative change in the effective elastic modulus reveals nonmonotonic dependence on the particle size with the most efficient soldering for mid-sized nanoparticles (about 610 nm diameter). We attribute this behavior to the crucial role of intrinsic fabrication impurities, which reduces the nanoparticles' free surface exposed to plasticization by supercritical fluids. Supercritical Ar, a good solvent for polystyrene, enabled effective soldering of nanoparticles, whereas high-pressure He treatment is entirely reversible.

Thickness-Dependent Elastic Softening of Few-Layer Free-Standing MoSe2.

Few-layer van der Waals (vdW) materials have been extensively investigated in terms of their exceptional electronic, optoelectronic, optical, and thermal properties. Simultaneously, a complete evaluation of their mechanical properties remains an undeniable challenge due to the small lateral sizes of samples and the limitations of experimental tools. In particular, there is no systematic experimental study providing unambiguous evidence on whether the reduction of vdW thickness down to few layers results in elastic softening or stiffening with respect to the bulk. In this work, micro-Brillouin light scattering is employed to investigate the anisotropic elastic properties of single-crystal free-standing 2H-MoSe2 as a function of thickness, down to three molecular layers. The so-called elastic size effect, that is, significant and systematic elastic softening of the material with decreasing numbers of layers is reported. In addition, this approach allows for a complete mechanical examination of few-layer membranes, that is, their elasticity, residual stress, and thickness, which can be easily extended to other vdW materials. The presented results shed new light on the ongoing debate on the elastic size-effect and are relevant for performance and durability of implementation of vdW materials as resonators, optoelectronic, and thermoelectric devices.

Mechanical reinforcement of polymer colloidal crystals by supercritical fluids.

Colloidal crystals realized by self-assembled polymer nanoparticles have prominent attraction as a platform for various applications from assembling photonic and phononic crystals, acoustic metamaterials to coating applications. However, the fragility of these systems limits their application horizon. In this work the uniform mechanical reinforcement and tunability of 3D polystyrene colloidal crystals by means of cold soldering are reported. This structural strengthening is achieved by high pressure gas (N2 or Ar) plasticization at temperatures well below the glass transition. Brillouin light scattering is employed to monitor in-situ the mechanical vibrations of the crystal and thereby determine preferential pressure, temperature and time ranges for soldering, i.e. formation of physical bonding among the nanoparticles while maintaining the shape and translational order. This low-cost method is potentially useful for fabrication and tuning of durable devices including applications in photonics, phononics, acoustic metamaterials, optomechanics, surface coatings and nanolithography.

On the Structure of Ultrathin FeO Films on Ag(111).

Ultrathin transition metal oxide films exhibit unique physical and chemical properties not observed for the corresponding bulk oxides. These properties, originating mainly from the limited thickness and the interaction with the support, make those films similar to other supported 2D materials with bulk counterparts, such as transition metal dichalcogenides. Ultrathin iron oxide (FeO) films, for example, were shown to exhibit unique electronic, catalytic and magnetic properties that depend on the type of the used support. Ag(111) has always been considered a promising substrate for FeO growth, as it has the same surface symmetry, only ~5% lattice mismatch, is considered to be weakly-interacting and relatively resistant to oxidation. The reports on the growth and structure of ultrathin FeO films on Ag(111) are scarce and often contradictory to each other. We attempted to shed more light on this system by growing the films using different preparation procedures and studying their structure using scanning tunneling microscopy (STM), low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). We observed the formation of a previously unreported Moiré superstructure with 45 Å periodicity, as well as other reconstructed and reconstruction-free surface species. The experimental results obtained by us and other groups indicate that the structure of FeO films on this particular support critically depends on the films' preparation conditions. We also performed density functional theory (DFT) calculations on the structure and properties of a conceptual reconstruction-free FeO film on Ag(111). The results indicate that such a film, if successfully grown, should exhibit tunable thickness-dependent properties, being substrate-influenced in the monolayer regime and free-standing-FeO-like when in the bilayer form.