Highly Resilient Noncovalently Associated Hydrogel Adhesives for Wound Sealing Patch.

The development of hydrogel adhesives with high mechanical resilience and toughness remains a challenging task. Hydrogels must exhibit high mechanical resilience to withstand the inevitable movement of the human body while simultaneously demonstrating strong wet tissue adhesion and appropriate toughness to hold and seal damaged tissues; However, tissue adhesion, toughness, and mechanical resilience are typically negatively correlated. Therefore, this paper proposes a highly resilient double-network (DN) hydrogel wound-sealing patch that exhibits a well-balanced combination of tissue adhesion, toughness, and mechanical resilience. The DN structure is formed by introducing covalently and non-covalently crosslinkable dopamine-modified crosslinkers and physically interactable linear poly(vinyl imidazole) (PVI). The resulting hydrogel adhesive exhibits high toughness and mechanical resilience due to the presence of a DN involving reversible physical intermolecular interactions such as hydrogen bonds, hydrophobic associations, cation-π interactions, π-π interactions, and chain entanglements. Moreover, the hydrogel adhesive achieves strong wet tissue adhesion through the polar hydroxyl groups of dopamine and the amine group of PVI. These mechanical attributes allow the proposed adhesive to effectively seal damaged tissues and promote wound healing by maintaining a moist environment.

Robust 2D layered MXene matrix-boron carbide hybrid films for neutron radiation shielding.

Large-scale fabrication of neutron-shielding films with flexible or complex shapes is challenging. Uniform and high boron carbide (B4C) filler loads with sufficient workability are needed to achieve good neutron-absorption capacity. Here, we show that a two-dimensional (2D) Ti3C2Tx MXene hybrid film with homogeneously distributed B4C particles exhibits high mechanical flexibility and anomalous neutron-shielding properties. Layered and solution-processable 2D Ti3C2Tx MXene flakes serve as an ideal robust and flexible matrix for high-content B4C fillers (60 wt.%). In addition, the preparation of a scalable neutron shielding MXene/B4C hybrid paint is demonstrated. This composite can be directly integrated with various large-scale surfaces (e.g., stainless steel, glass, and nylon). Because of their low thickness, simple and scalable preparation method, and an absorption capacity of 39.8% for neutrons emitted from a 241Am-9Be source, the 2D Ti3C2Tx MXene hybrid films are promising candidates for use in wearable and lightweight applications.

Visible-Light-Curable Acrylic Resins toward UV-Light-Blocking Adhesives for Foldable Displays.

Current technological advances in the organic light-emitting diode panel design of foldable smartphones demand advanced adhesives with UV-blocking abilities, beyond their conventional roles of bonding objects and relieving deformation stress. However, optically clear adhesives (OCAs) with UV-blocking ability cannot be prepared using conventional UV-curing methods relying on a photoinitiator. Herein, a new acrylic resin that can be efficiently cured using visible light without oxygen removal is presented, which may be used to develop UV-blocking OCAs for use in current flexible displays. A novel photocatalyst and a specific combination of additives facilitate sufficiently rapid curing under visible light in the presence of UV-absorbers. Only a very small amount of the highly active photocatalyst is required to prepare UV-blocking OCA films with very high transparency in the visible region. Using this system, a UV-blocking OCA that nearly meets the specifications of an OCA used in commercialized foldable smartphones is realized. This technology can also be utilized in other applications that require highly efficient visible light curing, such as optically clear resins, dental resins, and 3D/4D-printable materials.

Visible-Light-Curable Solvent-Free Acrylic Pressure-Sensitive Adhesives via Photoredox-Mediated Radical Polymerization.

Owing to their excellent properties, such as transparency, resistance to oxidation, and high adhesivity, acrylic pressure-sensitive adhesives (PSAs) are widely used. Recently, solvent-free acrylic PSAs, which are typically prepared via photopolymerization, have attracted increasing attention because of the current strict environmental regulations. UV light is commonly used as an excitation source for photopolymerization, whereas visible light, which is safer for humans, is rarely utilized. In this study, we prepared solvent-free acrylic PSAs via visible light-driven photoredox-mediated radical polymerization. Three α-haloesters were used as additives to overcome critical shortcomings, such as the previously reported low film curing rate and poor transparency observed during additive-free photocatalytic polymerization. The film curing rate was greatly increased in the presence of α-haloesters, which lowered the photocatalyst loadings and, hence, improved the film transparency. These results confirmed that our method could be widely used to prepare general-purpose solvent-free PSAs-in particular, optically clear adhesives for electronics.

Flame Retardant Submicron Particles via Surfactant-Free RAFT Emulsion Polymerization of Styrene Derivatives Containing Phosphorous.

The reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of diethyl-(4-vinylbenzyl) phosphate (DEVBP) was performed using PEG-TTC as a macro RAFT agent. PEG-TTC (MW 2000, 4000) was synthesized by the esterification of poly (ethylene glycol) methyl ether with a carboxylic-terminated RAFT agent, composed a hydrophilic poly (ethylene glycol) (PEG) block and a hydrophobic dodecyl chain. The RAFT emulsion polymerization of DEVBP was well-controlled with a narrow molecular size distribution. Dynamic light scattering and confocal laser scanning microscopy were used to examine the PEG-b-PDVBP submicron particles, and the length of the PEG chain (hydrophilic block) was found to affect the particle size distribution and molecular weight distribution. The submicron particle size increased with increasing degree of polymerization (35, 65, and 130), and precipitation was observed at a high degree of polymerization (DP) using low molecular weight PEG-TTC (DP 130, A3). The flame retardant properties of the PEG-b-PDVBP were evaluated by thermogravimetric analysis (TGA) and micro cone calorimeter (MCC). In the combustion process, the residue of PEG-b-PDEVBP were above 500 °C was observed (A1 ~ B3, 27 ~ 38%), and flame retardant effect of PEG-b-PDEVBP submicron particles/PVA composite were confirmed by increasing range of temperature and decreasing total heat release with increasing contents of PEG-b-PDEVBP. The PEG-b-PDEVBP submicron particles can provide flame retardant properties to aqueous, dispersion and emulsion formed organic/polymer products.

Resistance to Cleavage of Core⁻Shell Rubber/Epoxy Composite Foam Adhesive under Impact Wedge⁻Peel Condition for Automobile Structural Adhesive.

Epoxy foam adhesives are widely used for weight reduction, watertight property, and mechanical reinforcement effects. However, epoxy foam adhesives have poor impact resistance at higher expansion ratios. Hence, we prepared an epoxy composite foam adhesive with core⁻shell rubber (CSR) particles to improve the impact resistance and applied it to automotive structural adhesives. The curing behavior and pore structure were characterized by differential scanning calorimetry (DSC) and X-ray computed tomography (CT), respectively, and impact wedge⁻peel tests were conducted to quantitatively evaluate the resistance to cleavage of the CSR/epoxy composite foam adhesives under impact. At 5 and 10 phr CSR contents, the pore size and expansion ratio increased sufficiently due to the decrease in curing rate. However, at 20 phr CSR content, the pore size decreased, which might be due to the steric hindrance effect of the CSR particles. Notably, at 0 and 0.1 phr foaming agent contents, the resistance to cleavage of the adhesives under the impact wedge⁻peel condition significantly improved with increasing CSR content. Thus, the CSR/epoxy composite foam adhesive containing 0.1 phr foaming agent and 20 phr CSR particles showed high impact resistance (EC = 34,000 mJ/cm²) and sufficient expansion ratio (~148%).

Cyclooxygenase-2 and inducible nitric oxide synthase expression in thyroid neoplasms and their clinicopathological correlation.

To evaluate the expressions of cyclooxygenase-2 (COX-2) and inducible nitric oxide synthase (iNOS) in thyroid neoplasms in a Korean population, we studied a total of 154 cases: papillary carcinoma of classical type (PTC), 86; follicular adenoma (FA), 21; follicular carcinoma (FC), 35; medullary carcinoma (MC), 3; undifferentiated carcinoma (UC), 5; and Hurthle cell neoplasm (HN), 4. Using immunohistochemical staining, COX-2 expression was detected in 62 (72.1%) PTC specimens, 5 (23.8%) FA specimens, 10 (28.6%) FC specimens, 0 (0.0%) MC specimens, 1 (20.0%) UC specimen, and 3 (75%) HN specimens. iNOS expression was detected in 66 (76.7%) PTC specimens, 4 (19.0%) FA specimens, 13 (37.1%) FC specimens, 0 (0.0%) MC specimens, 3 (60.0%) UC specimens, and 4 (100%) HN specimens. The results showed that COX-2 and iNOS were frequently expressed in the PTC and HN specimens, and iNOS was more frequently overexpressed in the FC specimens than in the FA specimens. In PTC, COX-2 and iNOS were significantly overexpressed in patients over 45 yr of age (p=0.029, p=0.041), and iNOS expression was increased in patients with a large primary tumor (p=0.028). These results suggest that the upregulation of COX-2 and iNOS may contribute to the tumor progression of thyroid gland, particularly in PTC and HN, and iNOS may play an adjuvant role during the tumor progression of FC.