Ca2+ signals in human umbilical endothelial cells derived from pregnancy with fetal growth restriction associated with hypertensive disorder.

Fetal growth restriction associated with hypertensive disorders of pregnancy (FGR-HDP) is a prevalent pathology with a higher risk of perinatal morbimortality. In this condition, placental insufficiency and endothelial dysfunction serve key roles. The present prospective cohort study monitored 11 patients with an FGR-HDP and 15 with full-term normotensive pregnancies and studied post-natal intracellular calcium concentration ([Ca2+]i) signals in human umbilical vein endothelial cells (HUVECs). Small fetuses with placental insufficiency were identified using fetal biometry with Doppler velocimetry. Mean gestational age and birth weight were 31.8±4.1 weeks and 1,260±646 g for FGR-HDP and 39.2±0.8 weeks and 3,320±336 g for normal births, respectively. Abnormal umbilical artery Doppler waveforms were found in 64% of neonates with FGR-HDP. A significant percentage (86%) of FGR newborns were admitted to the neonatal intensive care unit at Gustavo Fricke hospital, Viña del Mar, Chile, with one case of death after birth. [Ca2+]i signals were measured by microfluorimetry in Fluo-3-loaded HUVECs from primary cultures. Altered [Ca2+]i signals were observed in HUVECs from FGR-HDP, where the sustained phase of ATP-induced [Ca2+]i responses was significantly reduced compared with the normotensive group. Also, the [Ca2+]i signals induced with 10 mM Ca2+ after depletion of internal Ca2+ stores were significantly higher. The present study provides a better comprehension of the role of altered cytosolic Ca2+ dynamics in endothelial dysfunction and an in vitro model to assess novel therapeutic approaches for decreasing or preventing complications in FGR-HDP.

Organoides de origen humano como modelo fisiopatológico de evaluación terapéutica de fármacos en COVID-19 / Organoids as a physiopathology model and therapeutic drug evaluation tool in COVID-19

Introducción: La pandemia causada por SARS-CoV-2 ha impactado al mundo gravemente en diversos ámbitos y con ello ha surgido la necesidad de contar con herramientas con mayor relevancia fisiológica para investigar patologías complejas como el COVID-19. Los organoides son un modelo experimental con características únicas como la capacidad de autoformar una estructura tridimensional utilizando células en cultivo. Sobre esta base, surge la siguiente pregunta ¿son los organoides un modelo experimental factible para reflejar la fisiopatología del COVID-19 y evaluar la eficacia de fármacos que limiten su progresión? Metodología: Para abordar esta interrogante, esta revisión plantea el analizar la validez de los organoides como modelo experimental y verificar su utilidad en la evaluación de fármacos para el COVID-19. Para cumplir estos objetivos se realizó una revisión sistemática cualitativa de la literatura, a través de una búsqueda en PubMed con el término 'COVID-19 and stem cells and organoids' y también en un número especial de la revista Cell. Resultados: Se organizaron los resultados relevantes por sistema fisiológico y en la evaluación de fármacos. Los organoides más empleados para estudios de COVID-19 correspondieron a tejido respiratorio, nervioso y digestivo. Algunos resultados encontrados en la revisión fueron similares a aquellos obtenidos a partir de tejidos de pacientes COVID-19 o autopsias, encontrándose hallazgos relevantes como la posible disrupción de la barrera epitelial del sistema nervioso por infección del plexo coroideo. También se logró observar efectividad de fármacos que posteriormente pasaron a ser aprobados y utilizados exitosamente en pacientes. Conclusión: Los organoides se pueden componer a partir de diferentes tipos celulares y bajo diferentes protocolos experimentales, siendo relevante la lectura crítica de los artículos científicos para decidir si sus resultados son extrapolables a la fisiopatología de la enfermedad.

Introduction: The pandemic caused by SARS-CoV-2 has impacted the world severely in several aspects and has created the need for research tools to study the COVID-19 disease. Organoids are experimental models with unique characteristics, like the ability to self-assemble in a tridimensional structure. Based on this, the following question arises: are organoids an experimental model suitable to reflect the physiopathology of COVID-19 and to allow the evaluation of the efficacy of drugs that limit its progression? Methods: To approach this question, this review aimed to analyze the validity of organoids as an experimental model and verify their utility in COVID-19 drug evaluation. To resolve these objectives, a qualitative systematic review was done through a PubMed search with the terms 'COVID-19 and stem cells and organoids' and on a special issue of the Cell Journal. Results: The results were organized by physiologic system and therapeutic drug evaluation. The most utilized tissues for the COVID-19 study were respiratory, nervous, and digestive. Some results found in the review were like those obtained from COVID-19 patient tissue or autopsies, finding some relevant discoveries like the possibility of the choroid plexus disruption in the nervous system caused by the infection. Efficacy was also observed in approved drugs and used later in patients successfully. Conclusion: Organoids might be composed starting with different cell types and under a variety of experimental protocols, being relevant the critical reading of the scientific literature to decide whether their results can be extrapolated to the pathophysiology of the disease

The forgotten material: Highly dispersible and swellable gelatin-based microspheres for pulmonary drug delivery of cromolyn sodium and ipratropium bromide.

Controlled-release formulations for pulmonary delivery are highly desirable for treating chronic diseases such as COPD. However, a limited number of polymers are currently approved for inhalation. The study presents a promising strategy using gelatin as a matrix for inhalable dry powders, allowing the controlled release of ionic drugs. Ionized cromoglicate sodium (CS) and ipratropium bromide (IBr) interacted in solution with charged gelatin before spray drying (SD). Calcium carbonate was used as a crosslinker. The microspheres showed remarkable aerosol performance after optimizing the SD parameters and did not cause cytotoxicity in A549 cells. The microspheres were highly dispersible with âˆ¼ 50-60% of respirable fraction and fine particle fraction 55-70%. Uncrosslinked microspheres increased their size from four to ten times by swelling after 5 min showing potential as a strategy to avoid macrophage clearance and prolong the therapeutic effect of the drug. Crosslinkers prevented particle swelling. Ionic interaction generated a moderate reduction of the drug release. Overall, this study provides a novel approach for developing DPI formulations for treating chronic respiratory diseases using a biopolymer approved by the FDA, potentially enhancing drug activity through controlled release and avoiding macrophage clearance.

Formulation of water-soluble Buddleja globosa Hope extracts and characterization of their antimicrobial properties against Pseudomonas aeruginosa.

Buddleja globosa Hope (BG) extracts are traditionally used to treat skin and gastric ulcers due to their healing properties. Non-aqueous solvents such as ethanol and DMSO are usually used to extract naturally occurring compounds. However, the cytotoxicity of these solvents and the low water solubility of the extracted compounds can hinder their biomedical applications. To overcome the limited solubility of the BG extracts, we aimed to enhance the solubility by processing a standardized hydroalcoholic extract (BG-126) through spray drying (SD), with and without two solubility enhancers. Spray-dried BG (BG-SD) extracts and spray-dried BG extracts plus polyvinylpyrrolidone (BG-SD PVP) and Soluplus® (BG-SD SP) were developed starting from BG-126 (containing 53% ethanol). These four formulations were characterized by total phenolic content, water solubility at 25°C and 37°C, and antimicrobial properties against Pseudomonas aeruginosa. All the SD formulations presented a solubility that allowed them to reach maximum concentrations of 1,024 µg/ml catechin for BG-SD and 2,048 µg/ml catechin for BG-SD PVP and BG-SD SP for antimicrobial testing. BG-SD showed the highest antimicrobial potency with a minimum inhibitory concentration (MIC) of 512 µg/ml catechin, followed by BG-126 with a MIC of 1,024 µg/ml catechin and SP. BG-126 was also shown to inhibit biofilm formation, as well as the excipients PVP and SP. The spray-dried BG (BG-SD) extract represents a promising natural active component with enhanced antimicrobial properties against P. aeruginosa for further research and the development of novel phytopharmaceuticals.

Innovating on Inhaled Bioequivalence: A Critical Analysis of the Current Limitations, Potential Solutions and Stakeholders of the Process.

Orally inhaled drug products (OIDPs) are an important group of medicines traditionally used to treat pulmonary diseases. Over the past decade, this trend has broadened, increasing their use in other conditions such as diabetes, expanding the interest in this administration route. Thus, the bioequivalence of OIDPs is more important than ever, aiming to increase access to affordable, safe and effective medicines, which translates into better public health policies. However, regulatory agencies leading the bioequivalence process are still deciding the best approach for ensuring a proposed inhalable product is bioequivalent. This lack of agreement translates into less cost-effective strategies to determine bioequivalence, discouraging innovation in this field. The Next-Generation Impactor (NGI) is an example of the slow pace at which the inhalation field evolves. The NGI was officially implemented in 2003, being the last equipment innovation for OIDP characterization. Even though it was a breakthrough in the field, it did not solve other deficiencies of the BE process such as dissolution rate analysis on physiologically relevant conditions, being the last attempt of transferring technology into the field. This review aims to reveal the steps required for innovation in the regulations defining the bioequivalence of OIDPs, elucidating the pitfalls of implementing new technologies in the current standards. To do so, we collected the opinion of experts from the literature to explain these trends, showing, for the first time, the stakeholders of the OIDP market. This review analyzes the stakeholders involved in the development, improvement and implementation of methodologies that can help assess bioequivalence between OIDPs. Additionally, it presents a list of methods potentially useful to overcome some of the current limitations of the bioequivalence standard methodologies. Finally, we review one of the most revolutionary approaches, the inhaled Biopharmaceutical Classification System (IBCs), which can help establish priorities and order in both the innovation process and in regulations for OIDPs.

Nuevas perspectivas para el tratamiento de la infección por Helicobacter pylori / New perspectives in the treatment of Helicobacter pylori infection

La infección por Helicobacter pylori es altamente prevalente en el mundo. En Chile, esta bacteria está presente entre un 40-70% de la población y su presencia está asociada a serias complicaciones que van desde la gastritis y el desarrollo de úlceras hasta el cáncer gástrico. Este último, es uno de los carcinomas más frecuentes en nuestro país, con una tasa de mortalidad de 20 por cada 100000 habitantes. Actualmente, el principal tratamiento de erradicación de esta bacteria se basa en triterapias, que consisten en un inhibidor de la bom-ba de protones (IBP) asociado a dos antibióticos en altas dosis. Sin embargo, existe una gran resistencia de H. pylori a los antibióticos, que ha sido reportada por la literatura científica y reconocida por la Organización Mundial de la Salud (OMS). Esta revisión se enfoca en identificar nuevas estrategias de tratamiento para la erradicación de H. pylori con especial interés en aquellos tratamientos que han sido evaluados contra el crecimiento de este patógeno en forma de biopelículas. Este tipo de crecimiento le confiere a H. pylori una mayor resistencia a los antibióticos. Se analizaron diferentes agentes y formulaciones que han sido reportados. Se destacan el uso de nanopartículas y compuestos naturales, así como formulaciones bioadhesivas que han mostrado disminuir la infección por H. pylori. Sin embargo, se sigue necesitando avanzar en estudios clínicos para comprobar la eficacia de nuevas formulaciones con miras a una exitosa erradicación de H. pylori.

Helicobacter pylori infection is highly prevalent worldwide. In Chile, about 40 to 70% of the population is infected with this pathogen. H. pylori infection is linked with severe complications ranging from gastritis and ulcer development to gastric carcinoma. The latter is one of the most frequent cancers in our country, with a mortality of 20 per 100000 people. The primary eradication treatment for this infection is a tritherapy comprised of a proton pump inhibitor combined with two antibiotics at high doses. However, there is a great resistance of H. pylori to antibiotics, reported by the literature and recognised by the World Health Organization (WHO). This review fo-cuses on identifying novel strategies for eradicating H. pylori with a particular interest in those treatments that have been tested against H. pylori growing in the form of biofilms. This type of microbial growth provides high resistance to antibiotics. We analysed different agents and formulations reported in the literature. Nanoparticles and natural compounds, as well bioadhesive formulations, are among the treatments showing promising results in reducing the infection. However, more clinical studies are needed to validate the efficacy of these novel treatments to successfully eradicate H. pylori.

In vivo efficacy of a dry powder formulation of ciprofloxacin-copper complex in a chronic lung infection model of bioluminescent Pseudomonas aeruginosa.

A significant limitation of locally delivered treatments for chronic pulmonary infections is often the short residence time within the airways. Ciprofloxacin (CIP), for example, undergoes rapid absorption from the airway lumen. Previously, we demonstrated that the complexation of CIP with copper (CIP-Cu) reduces its apparent epithelial permeability and pulmonary absorption rate without affecting antimicrobial activity against Pseudomonas aeruginosa grown planktonically or as biofilms. This study aimed to evaluate the in vivo efficacy of CIP-Cu, prepared as a dry powder, in a chronic lung infection model. The powders were prepared by jet milling (CIP-HCl) and by spray drying (CIP-Cu). A bioluminescent strain of P. aeruginosa (PAO1::p16Slux) was used to prepare bacteria-loaded agar beads that were inoculated intratracheally to rats. The dynamics of the infection were monitored using luminometry. The bacteria/beads ratio was optimized to allow the highest luminescence signal and animal survival for 8 days. The efficacy of the treatment was evaluated by luminometry in addition to the end-point (Day 8) where colony counting was performed after lung harvesting. Luminescent P. aeruginosa entrapped in agar beads were useful to monitor the spatial development of the chronic lung infection in rats. The rats were treated with the dry powders in a nose-only inhalation exposure system (NOIES). CIP-Cu and CIP-HCl powders showed similar aerodynamic properties and comparable CIP lung deposition. However, treatment with CIP-Cu significantly (p < 0.01) reduced by 4-log the number of CFU of P. aeruginosa per lung in the chronic infection model, whereas CIP-HCl effect was not different from the untreated control group.

Efficacy of Ciprofloxacin and Its Copper Complex against Pseudomonas aeruginosa Biofilms.

A limitation of antibiotic treatments for P. aeruginosa (PA) chronic pulmonary infections is the reduced efficacy due to sub-therapeutic concentrations at the infection site and the development of biofilm. A novel approach to sustain ciprofloxacin (CIP) in the lungs after inhalation is to reduce its pulmonary absorption rate by its complexation with copper (CIP-Cu). This study aimed to evaluate the antimicrobial action of cationic CIP-Cu complex in PA biofilms in terms of drug concentration and time. Two PA strains, PA01 and PA14, were grown to form biofilm layers in equilibrium with planktonic cells. Static parameters such as pyoverdine production by planktonic cells, enzymatic activity within biofilms, and biofilm biomass 24 h after the addition of CIP or CIP-Cu were evaluated. Also, the kinetic effects of CIP and CIP-Cu on biofilms were evaluated by bioluminescence kinetics using transgenic strains. No differences were observed between CIP and CIP-Cu in terms of efficacy against biofilms, validating the potential of using this complex to treat PA biofilms. Interestingly, CIP concentrations slightly below the MIC value against planktonic bacteria stimulated both virulence and biofilm PA01 production. These results support the need to accurately achieve high CIP concentration in the lungs, which can be more easily achieved by pulmonary delivery of advanced CIP formulations (CIP-metal complexes or liposomal CIP) instead of the oral administration of free CIP.

Current Status of In Vitro Models and Assays for Susceptibility Testing for Wound Biofilm Infections.

Biofilm infections have gained recognition as an important therapeutic challenge in the last several decades due to their relationship with the chronicity of infectious diseases. Studies of novel therapeutic treatments targeting infections require the development and use of models to mimic the formation and characteristics of biofilms within host tissues. Due to the diversity of reported in vitro models and lack of consensus, this review aims to provide a summary of in vitro models currently used in research. In particular, we review the various reported in vitro models of Pseudomonas aeruginosa biofilms due to its high clinical impact in chronic wounds and in other chronic infections. We assess advances in in vitro models that incorporate relevant multispecies biofilms found in infected wounds, such as P. aeruginosa with Staphylococcus aureus, and additional elements such as mammalian cells, simulating fluids, and tissue explants in an attempt to better represent the physiological conditions found at an infection site. It is hoped this review will aid researchers in the field to make appropriate choices in their proposed studies with regards to in vitro models and methods.

PEGylated Chitosan for Nonviral Aerosol and Mucosal Delivery of the CRISPR/Cas9 System in Vitro.

Chitosan has been widely employed to deliver nucleic acids such as siRNA and plasmids. However, chitosan-mediated delivery of a gene-editing system has not been reported yet. In this study, poly(ethylene glycol) monomethyl ether (mPEG) was conjugated to chitosan with different molecular weights (low molecular weight and medium molecular weight chitosan) achieving a high degree of substitution as identified by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (1H NMR) spectra. PEGylated chitosan/pSpCas9-2A-GFP nanocomplexes were formed at different N/ P (amine group to phosphate group) ratios and characterized in terms of size and zeta potential. The nanocomplexes developed showed the capability to protect loaded nucleic acids from DNase I digestion and from the stresses of nebulization. In addition, we demonstrated that the PEG conjugation of chitosan improved the mucus-penetration capability of the formed nanocomplexes at N/ P ratios of 5, 10, 20, and 30. Finally, PEGylated low molecular weight chitosan nanocomplexes showed optimal transfection efficiency at an N/ P ratio of 20, while PEGylated medium molecular weight chitosan nanocomplexes showed an optimal transfection efficiency at an N/ P ratio of 5 at pH 6.5 and 6.8. This study established the basis for the delivery of a gene-editing system by PEGylated chitosan nanocomplexes.

Development, Characterization, and In Vitro Testing of Co-Delivered Antimicrobial Dry Powder Formulation for the Treatment of Pseudomonas aeruginosa Biofilms.

Pseudomonas aeruginosa is an opportunistic bacteria responsible for recurrent lung infections. Previously, we demonstrated that certain materials improved the activity of tobramycin (Tob) against P. aeruginosa biofilms in vitro. We aimed to develop prototype dry powder formulations comprising Tob and a mixture of excipients and test its aerodynamic properties and antimicrobial activity. First, we evaluated different combinations of excipients with Tob in solution against P. aeruginosa biofilms. We selected the compositions with the highest activity, to prepare dry powders by spray drying. The powders were characterized by morphology, bulk density, water content, and particle size distributions. Finally, the antimicrobial activity of the powders was tested. The combinations of Tob (64 µg/mL) with l-alanine and l-proline (at 10 and 20 mM; formulations 1 and 2, respectively) and with l-alanine and succinic acid (at 20 mM; formulation 3) showed the highest efficacies in vitro and were prepared as dry powders. Formulation 1 had the best aerodynamic performance as indicated by the fine particle fraction and the best in vitro activity against P. aeruginosa biofilms. Formulation 3 represents a good candidate for further optimization because it demonstrated good dispersibility potential and optimization of the particle size distribution may achieve high delivery efficiencies.

PEGylation of Tobramycin Improves Mucus Penetration and Antimicrobial Activity against Pseudomonas aeruginosa Biofilms in Vitro.

Pseudomonas aeruginosa is the predominant pathogen in the persistent lung infections of cystic fibrosis (CF) patients among other diseases. One of the mechanisms of resistance of P. aeruginosa infections is the formation and presence of biofilms. Previously, we demonstrated that PEGylated-tobramycin (Tob-PEG) had superior antimicrobial activity against P. aeruginosa biofilms compared to tobramycin (Tob). The goal of this study was to optimize the method of PEGylation of Tob and assess its activity in an in vitro CF-like mucus barrier biofilm model. Tob was PEGylated using three separate chemical conjugation methods and analyzed by 1H NMR. A comparison of the Tob-PEG products from the different conjugation methods showed significant differences in the reduction of biofilm proliferation after 24 h of treatment. In the CF-like mucus barrier model, Tob-PEG was significantly better than Tob in reducing P. aeruginosa proliferation after only 5 h of treatment ( p < 0.01). Finally, Tob-PEG caused a reduction in the number of surviving P. aeruginosa biofilm colonies higher than that of Tob ( p < 0.0001). We demonstrate the significantly improved antimicrobial activity of Tob-PEG against P. aeruginosa biofilms compared to Tob using two PEGylation methods. Tob-PEG had better in vitro activity compared to that of Tob against P. aeruginosa biofilms growing in a CF-like mucus barrier model.

Intranasal immunization with dry powder vaccines.

Vaccination represents a cost-effective weapon for disease prevention and has proven to dramatically reduce the incidences of several diseases that once were responsible for significant mortality and morbidity worldwide. The nasal cavity constitutes the initial stage of the respiratory system and the first contact with inhaled pathogens. The intranasal (IN) route for vaccine administration is an attractive alternative to injection, due to the ease of administration as well as better patient compliance. Many published studies have demonstrated the safety and effectiveness of IN immunization with liquid vaccines. Currently, two liquid IN vaccines are available and both contain live attenuated influenza viruses. FluMist® was approved in 2003 in the United States, and Nasovac® H1N1 vaccine was approved in India in 2010. Preclinical studies showed that IN immunization with dry powder vaccines (DPVs) is feasible. Although there is not a commercially available DPV yet, DPVs have the inherent advantage of being relatively more stable than liquid vaccines. This review focuses on recent developments of DPVs as next-generation IN vaccines.