RESUMO
INTRODUCTION: Prevention and treatment of traumatic brain injuries is critical to preserving soldier brain health. Laboratory studies are commonly used to reproduce injuries, understand injury mechanisms, and develop tolerance limits; however, this approach has limitations for studying brain injury, which requires a physiological response. The nonhuman primate (NHP) has been used as an effective model for investigating brain injury for many years. Prior research using the NHP provides a valuable resource to leverage using modern analysis and modeling techniques to improve our understanding of brain injury. The objectives of the present study are to develop an anatomically accurate finite element model of the NHP and determine regional brain responses using previously collected NHP data. MATERIALS AND METHODS: The finite element model was developed using a neuroimaging-based anatomical atlas of the rhesus macaque that includes both cortical and subcortical structures. Head kinematic data from 10 sagittal NHP experiments, four +Gx (rearward) and six -Gx (frontal), were used to test model stability and obtain brain strain responses from multiple severities and vectors. RESULTS: For +Gx tests, the whole-brain cumulative strain damage measure exceeding a strain threshold of 0.15 (CSDM15) ranged from 0.28 to 0.89, and 95th percentile of the whole-brain maximum principal strain (MPS95) ranged from 0.21 to 0.59. For -Gx tests, whole-brain CSDM15 ranged from 0.02 to 0.66, and whole-brain MPS95 ranged from 0.08 to 0.39. CONCLUSIONS: Recognizing that NHPs are the closest surrogate to humans combined with the limitations of conducting brain injury research in the laboratory, a detailed anatomically accurate finite element model of an NHP was developed and exercised using previously collected data from the Naval Biodynamics Laboratory. The presently developed model can be used to conduct additional analyses to act as pilot data for the design of newer experiments with statistical power because of the sensitivity and resources needed to conduct experiments with NHPs.
Assuntos
Lesões Encefálicas , Cabeça , Animais , Humanos , Análise de Elementos Finitos , Macaca mulatta , Encéfalo/diagnóstico por imagem , Fenômenos BiomecânicosRESUMO
INTRODUCTION: Because brain regions are responsible for specific functions, regional damage may cause specific, predictable symptoms. However, the existing brain injury criteria focus on whole brain response. This study developed and validated a detailed human brain computational model with sufficient fidelity to include regional components and demonstrate its feasibility to obtain region-specific brain strains under selected loading. METHODS: Model development used the Simulated Injury Monitor (SIMon) model as a baseline. Each SIMon solid element was split into 8, with each shell element split into 4. Anatomical regions were identified from FreeSurfer fsaverage neuroimaging template. Material properties were obtained from literature. The model was validated against experimental intracranial pressure, brain-skull displacement, and brain strain data. Model simulations used data from laboratory experiments with a rigid arm pendulum striking a helmeted head-neck system. Data from impact tests (6 m/s) at 2 helmet sites (front and left) were used. RESULTS: Model validation showed good agreement with intracranial pressure response, fair to good agreement with brain-skull displacement, and good agreement for brain strain. CORrelation Analysis scores were between 0.72 and 0.93 for both maximum principal strain (MPS) and shear strain. For frontal impacts, regional MPS was between 0.14 and 0.36 (average of left and right hemispheres). For lateral impacts, MPS was between 0.20 and 0.48 (left hemisphere) and between 0.22 and 0.51 (right hemisphere). For frontal impacts, regional cumulative strain damage measure (CSDM20) was between 0.01 and 0.87. For lateral impacts, CSDM20 was between 0.36 and 0.99 (left hemisphere) and between 0.09 and 0.93 (right hemisphere). CONCLUSIONS: Recognizing that neural functions are related to anatomical structures and most model-based injury metrics focus on whole brain response, this study developed an anatomically accurate human brain model to capture regional responses. Model validation was comparable with current models. The model provided sufficient anatomical detail to describe brain regional responses under different impact conditions.
Assuntos
Lesões Encefálicas , Cabeça , Humanos , Análise de Elementos Finitos , Encéfalo/diagnóstico por imagem , Encéfalo/fisiologia , Pressão Intracraniana , Fenômenos BiomecânicosRESUMO
Brain injuries in automated vehicles during crash events are likely to include mechanisms of head impact in non-standard positions and postures (i.e., occupants not facing forward in an upright position). Federal regulations currently focus on impact conditions in primary planes of motion, such as frontal or rear impacts (sagittal plane of motion) or side impact (coronal plane of motion) and do not account for out of position occupants or non-standard postures. The objective of the present study was to develop and use the anatomically accurate brain finite element model to parametrically determine the injury metrics under different vectors with head rotation. A custom developed brain finite element model with anatomical accuracy and several anatomical regions defined was used to evaluate whole-brain strain as well as regional brain strain. Cumulative Strain Damage Measure (CSDM) at a threshold of 20% strain and the 95th percentile of the maximum principal strain (MPS95) were calculated for the whole brain and each brain region under multiple rotational directions. The model was exposed to a sinusoidal angular acceleration pulse of 5000 rad per second squared (rad/s2-) over 12.5 ms. The same pulse was used in the primary axes of motion and (lateral bending, flexion, extension, axial rotation) and combined axes representing oblique flexion and oblique extension. Whole brain CSDM20 was highest for lateral bending. Whole brain MPS95 was highest for axial rotation. The rCSDM20 was more susceptible to impact direction, with several brain regions having substantial accumulation of strain for oblique flexion and lateral bending. Comparatively, rMPS95 was more consistent across all rotation directions. The present study quantified the regional brain strain response under multiple rotational vectors identifying a high amount of variability in the accumulation of strain (i.e., CSDM20) in the hypothalamus, hippocampus, and midbrain specifically. While there was a high amount of variability in the accumulation of strain for multiple regions, the maximum strain measured (i.e., MPS95) in the regions was more consistent.
RESUMO
Background: Our elderly population is growing and the number of spine fractures in the elderly is also growing. The elderly population in general may be considered as poor surgical candidates experience a high rate of fractures at C1 and C2 compared with the general population. Nonoperative management of upper cervical fractures is not benign as there is a high nonunion rate for both C1 and C2 fractures in the elderly, and orthosis compliance is often suboptimal, or complicated by skin breakdown. The optimal technique for upper cervical stabilization in the elderly may be different than in younger populations as the bone quality is inferior in the elderly. The objective of this basic science study is to determine whether the bone mineral density (BMD) of C1 and C2 vary by region, and if this is a gender difference in this elderly age group. Methods: Twenty cadaveric spines from 45 to 83 years of age were used to obtain BMD using quantitated computed tomography (QCT). BMD was measured using a QCT. For C1, 8 regions were determined: anterior tubercle, bilateral anterior and medial lateral masses, bilateral posterior arches, and posterior tubercle. For C2, 7 regional BMDs were determined: top of odontoid, base of odontoid-body interface, mid body, bilateral lateral masses, anterior inferior body near the discs space, and the C2 spinous process. Results: The BMD was greatest at the C1 anterior tubercle (564.4±175.8 mg/cm3) and C1 posterior ring (420.8±110.2 mg/cm3), and least at the anterior and medial lateral masses (262.8±59.5 mg/cm3, 316.9±72.6 mg/cm3). At C2 QCT BMD was greatest at the top of the dens (400.6±107.9 mg/cm3) decreasing down through the odontoid-C2 body junction (267.8±103.5 mg/cm3) and least in the mid C2 body 249.1±68.8 mg/cm3). The posterior arch of C1 and the spinous process of C2 had higher BMD's 420.8±110.2 mg/cm3 and 284.1±93.0 mg/cm3, respectively. A high correlation was observed between the BMD at the interface of the dens-vertebral body with the vertebral body with a Pearson correlation coefficient of 0.86. The BMD of the top of dens was significantly higher (p<.05) than all the regions in C2. Conclusions: Regional and segmental BMD variations at C1 and C2 have clinical implications for surgical constructs in the elderly population. Given the higher BMDs of the C1 and C2 spinous process and posterior arches, consideration should be given to incorporate these areas using various C1-C2 wiring techniques. In the elderly, lateral masses particularly at C1 with lower BMD may result in potential screw loosening and nonunion in this age group. Old-school wiring techniques have a track record of efficacy and safety with less blood loss, reduced operative time, reduced X-ray exposure, and should be considered in the elderly as a primary stabilization technique or a belt-over suspenders approach based on regional variations in BMD in the elderly.
RESUMO
The anterior, posterior, transforaminal, and circumferential lumbar interbody fusions (ALIF, PLIF, TLIF, CLIF/360) are used to treat spondylolisthesis, trauma, and degenerative pathologies. This study aims to investigate the biomechanical effects of the lumbar interbody fusion techniques on the spine. A validated T12-sacrum lumbar spine finite-element model was used to simulate surgical fusion of L4-L5 segment using ALIF, PLIF with one and two cages, TLIF with unilateral and bilateral fixation, and CLIF/360. The models were simulated under pure-moment and combined (moment and compression) loadings to investigate the effect of different lumbar interbody fusion techniques on range of motion, forces transferred through the vertebral bodies, disc pressures, and endplate stresses. The range of motion of the lumbar spine was decreased the most for fusions with bilateral posterior instrumentations (TLIF, PLIF, and CLIF/360). The increase in forces transmitted through the vertebrae and increase in disc pressures were directly proportional to the range of motion. The discs superior to fusion were under higher pressure, which was attributed to adjacent segment degeneration in the superior discs. The increase in endplate stresses was directly proportional to the cross-sectional area and was greater in caudal endplates at the fusion level, which was attributed to cage subsidence. The response of the models was in line with overall clinical observations from the patients and can be further used for future studies, which aim to investigate the effect of geometrical and material variations in the spine. The model results will assist surgeons in making informed decisions when selecting fusion procedures based on biomechanical effects.
Assuntos
Vértebras Lombares , Fusão Vertebral , Humanos , Vértebras Lombares/cirurgiaRESUMO
INTRODUCTION: Size-matched volunteer studies report gender-dependent variations in spine morphology, and head mass and inertia properties. The objective of this study was to determine the influence of these properties on upper and lower cervical spine temporal kinematics during G+x loading. METHODS: Parametrized three-dimensional head-neck finite element models were used, and impacts were applied at 1.8 and 2.6 m/s at the distal end. Details are given in the article. Contributions of population-based variations in morphological and mass-related variables on temporal kinematics were evaluated using sensitivity analysis. Influence of variations on time to maximum nonphysiological curve formation, and flexion of upper and extension of the lower spines were analyzed for male-like and female-like spines. RESULTS: Upper and lower spines responded with initial flexion and extension, resulting in a nonphysiological curve. Time to maximum nonphysiological curve and range of motions (ROMs) of the cervical column ranged from 45 to 66 ms, and 30 to 42 deg. Vertebral depth and location of the head center of gravity (cg) along anteroposterior axis were most influential variables for the upper spine flexion. Location of head cg along anteroposterior axis had the greatest influence on the time of the curve. Both anteroposterior and vertical locations of head cg, disc height, vertebral depth, head mass, and size were influential for the lower spine extension kinematics. CONCLUSIONS: Models with lesser vertebral depth, that is, female-like spines, experienced greater range of motions and pronounced nonphysiological curves. This results in greater distraction/stretch of the posterior upper spine complex, a phenomenon attributed to suboccipital headaches. Forward location of head cg along anteroposterior axis had the greatest influence on upper and lower spine motions and time of formation of the curve. Any increased anteroposterior location of cg attributable to head supported mass may induce greater risk of injuries/neck pain in women during G+x loading.
Assuntos
Pescoço , Fenômenos Biomecânicos , Vértebras Cervicais , Feminino , Cabeça , Humanos , Masculino , Amplitude de Movimento ArticularRESUMO
INTRODUCTION: Accelerative events commonly expose military pilots to potentially injurious + Gz (axial, caudal to cranial) accelerations. The Naval Biodynamics Laboratory exposed nonhuman primates (NHPs) to + Gz loading in two subject orientations (supine or upright) to assess the effect of orientation and accelerations associated with injury at accelerations unsafe for human participation. MATERIALS AND METHODS: Archived care records, run records, and necropsy and pathology reports were used to identify acceleration-related injuries. Injuries were categorized as central nervous system (CNS), musculoskeletal (MSK) system, or thoracic (THR). The occurrence of injuries relative to corresponding peak sled acceleration (PSA) and subject orientation were compared. A t-test was applied within each injury category to test for a significant difference in mean PSA between orientations. RESULTS: For all 63 + Gz runs conducted, PSA ranged between 6 and 86 G. Of these runs, 17 (6 supine, 11 upright) resulted in acceleration-related injury. The lowest PSAs associated with injury for supine and upright were 69.8 G and 39.6 G, respectively. Individual injury occurrences for supine runs (CNS [n = 5], MSK [n = 6], and THR [n = 6]) occurred at/above 75.7 G, 69.8 G, and 69.8 G, respectively. For upright runs, injury occurrences (CNS [n = 3], MSK injuries [n = 9], and THR injuries [n = 6]) occurred at/above 60.1 G, 39.6 G, and 50.5 G, respectively. The applied t-test showed significant difference between the mean orientation accelerations within each category. Injuries to supine NHPs included compression fracture, organ damage, brain hemorrhage, spinal cord hemorrhage, cervical hemorrhage, paresis/paraplegia, and THR bruising, whereas injuries to upright NHPs included compression fracture, organ damage, spinal cord hemorrhage, paresis/paraplegia, THR bruising, and difficulty breathing. CONCLUSIONS: Axial loading to supine occupants produced more CNS injuries, whereas upright produced more MSK injuries. Both orientations produced equal THR injuries. NHP injuries reported reflected those reported following human + Gz acceleration events, highlighting the importance of orientation during acceleration to mitigate injury for next generation equipment design and testing.
Assuntos
Aceleração , Cabeça , Animais , Pé , Primatas , Suporte de CargaRESUMO
INTRODUCTION: Cervical disc arthroplasty (CDA), a motion-preserving alternative to anterior cervical discectomy and fusion (ACDF), is used in military patients for the treatment of disorders such as spondylosis. Since 2007, the FDA has approved eight artificial discs. The objective of this study is to compare the biomechanics after ACDF and CDA with two FDA-approved devices of differing designs under head and head supported mass loadings. MATERIALS AND METHODS: A previously validated osteoligamentous C2-T1 finite element model was used to simulate ACDF and two types of CDA (Bryan and Prodisc C) at the C5-C6 level. The hybrid loading protocol associated with in vivo head and head supported mass was used to apply flexion and extension loading. First, intact spine was subjected to 2 Nm of flexion extension and the range of motion (ROM) was measured. Next, for each surgical option, flexion-extension moments duplicating the same ROM as the intact spine were determined. Under these surgery-specific moments, ROM and facet force were obtained at the index level, and ROM, facet force, and intradiscal pressure at the rostral and caudal adjacent levels. RESULTS: ACDF led to increased motion, force and pressures at the adjacent levels. Prodisc C led to increased motion and facet force at the index level, and decreased motion, facet force, and intradiscal pressure at both adjacent levels. Bryan produced less dramatic biomechanical alterations compared with ACDF and Prodisc C. Numerical results are given in the article. CONCLUSIONS: Recognizing that ROM is a clinical measure of spine stability/performance, CDA demonstrates a more physiological biomechanical response than ACDF, although the exact pattern depends on the implant design. Anterior and posterior column load-sharing patterns were different between the two implants and may affect implant selection based on the anatomical and pathological state at the index and adjacent levels.
Assuntos
Fusão Vertebral , Artroplastia , Fenômenos Biomecânicos , Vértebras Cervicais/cirurgia , Discotomia , Análise de Elementos Finitos , Humanos , Degeneração do Disco Intervertebral/cirurgia , Amplitude de Movimento ArticularRESUMO
PURPOSE: The objective of this study is to directly compare different types of cervical artificial disc implants using an in vivo model capable of simulating the axial load on a neck that is similar to the human neck. METHODS: Cervical arthroplasty was performed at C3-4 in 14 healthy female adult Alpine goats. The goats were divided into three groups. Group A received Bryan (unconstrained one-piece design); Group B received ProDisc-C (semi-constrained two-piece design); and Group C received Mobi-C (unconstrained three-piece design) artificial discs. The goats were monitored in a veterinary unit for 6 months with radiography at regular intervals. RESULTS: Each goat tolerated cervical arthroplasty well and had satisfactory placement of their implant per intra-operative radiography. Implants monitored in Group A demonstrated no migration. One out of five implants in Group B experienced anterior migration at 3 months. In Group C, anterior migration and disintegration occurred in all four implants, with migration occurring during the first postoperative week in three implants and after 5 weeks in the fourth. CONCLUSIONS: Unconstrained multi-piece artificial cervical discs may be prone to anterior migration and extrusion out of the disc space. This outcome deserves attention in individuals with a hypermobile neck and/or an occupation involving the use of a head-supported mass, such as helmets.
Assuntos
Vértebras Cervicais/cirurgia , Substituição Total de Disco/instrumentação , Animais , Fenômenos Biomecânicos , Vértebras Cervicais/fisiopatologia , Modelos Animais de Doenças , Cabras/lesões , Desenho de Prótese/métodos , Desenho de Prótese/normas , Amplitude de Movimento Articular/fisiologia , Fusão Vertebral/instrumentação , Fusão Vertebral/métodos , Fusão Vertebral/veterinária , Substituição Total de Disco/métodos , Substituição Total de Disco/veterináriaRESUMO
OBJECTIVE: To determine role of lordosis in cervical spine injuries using a novel competing risk analysis model. METHODS: The first subgroup of published experiments (n = 20) subjected upright human cadaver head-neck specimens to impact loading. The natural lordosis was removed. The second (n = 21) and third (n = 10) subgroups of published tests subjected inverted specimens to head impact loading. Lordosis was preserved in these 2 subgroups. Using axial force and age as variables, competing risks analysis techniques were used to determine the role of lordosis in the risk of bone-only, ligament-only, and bone and ligament injuries. RESULTS: Bony injuries were focused more at 1 level to a straightened spine, and ligament injuries were spread around multiple levels. Age was not a significant (P < 0.05) covariate. A straightened spine had 3.23 times higher risk of bony injuries than a lordotic spine. The spine with maintained lordosis had 1.14 times higher risk of ligament injuries, and 2.67 times higher risk of bone and ligament injuries than a spine without lordosis (i.e., preflexed column). CONCLUSIONS: Increased risk of bony injuries in a preflexed spine and ligament injuries in a lordotic spine may have implications for military personnel, as continuous use of helmets in the line of duty affects the natural curvature; astronauts, as curvatures are less lordotic after missions; and civilian patients with spondylotic myelopathy who use head protective devices, as curvatures may change over time in addition to the natural aging process.
Assuntos
Vértebras Cervicais/fisiologia , Ligamentos/lesões , Lordose/complicações , Traumatismos da Coluna Vertebral/etiologia , Fenômenos Biomecânicos/fisiologia , Cadáver , Humanos , Lordose/fisiopatologia , Modelos Estatísticos , Estudos Retrospectivos , Medição de Risco , Traumatismos da Coluna Vertebral/fisiopatologiaRESUMO
The human cervical spine sustains compressive loading in automotive events and military operational activities, and the contact and noncontact loading are the two primary impact modes. Biomechanical and anatomical studies have shown differences between male and female cervical spines. Studies have been conducted to determine the human tolerance in terms of forces from postmortem human subject (PMHS) specimens from male and female spines; however, parametric risk curves specific to female spines are not available from contact loading to the head-neck complex under the axial mode. This study was conducted to develop female-spine based risk curves from PMHS tests. Data from experiments conducted by the authors using PMHS upright head-spines were combined with data from published studies using inverted head-spines. The ensemble consisted of 20 samples with ages ranging from 29 to 95 years. Except one, all specimens sustained neck injuries, consisting of fractures to cervical vertebrae, and disruptions to the intervertebral disc and facet joints, and ligaments. Parametric survival analysis was used to derive injury probability curves using the compressive force, uncensored for injury and right censored for noninjury data points. The specimen age was used as the covariate. Injury probability curves were derived using the best fit distribution, and the ±â¯95% confidence interval limits were obtained. Results indicated that age is a significant covariate for injury for the entire ensemble. Peak forces were extracted for 35, 45, and 63 (mean) years of age, the former two representing the young (military) and the latter, the automobile occupant populations. The forces of 1.2â¯kN and 2.9â¯kN were associated with 5% and 50% probability of injury at 35 years. These values at 45 years were 1.0â¯kN and 2.4â¯kN, and at 63 years, they were 0.7â¯kN and 1.7â¯kN. The normalized widths of the confidence intervals at these probability levels for the mean age were 0.74 and 0.48. The preliminary injury risk curves presented should be used with appropriate caution. This is the first study to develop risk curves for females of different ages using parametric survival analysis, and can be used to advance human safety, and design and develop manikins for military and other environments.
Assuntos
Vértebras Cervicais/lesões , Teste de Materiais , Fenômenos Mecânicos , Traumatismos da Coluna Vertebral , Adulto , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Feminino , Humanos , Pessoa de Meia-Idade , Probabilidade , Medição de Risco , Caracteres SexuaisRESUMO
OBJECTIVE: The research objective was to conduct an initial analysis of non-human primate (NHP) data from frontal and rear impact events archived in the Biodynamics Data Resource (BDR) records of the Naval Biodynamics Laboratory (NBDL). These rare data, collected between 1973 and 1989, will inform the safety community of upper-end tolerance limits of NHP and may be related to severe crash scenarios. METHODS: Data from frontal and rear acceleration tests to 93 macaque NHP were examined. Each NHP was fully torso restrained, whereas the head-neck complex was unrestrained. Each NHP underwent between 1 and 21 total runs; 2 total runs was most common-a low-level run and then a high-level run. Following each impact exposure, the NHP was evaluated using a series of medical examinations. Now part of the legacy collection in the BDR, these evaluations were used to assess NHP exposures to be in one of 3 categories: noninjurious, injurious, or fatal. Using reported peak sled acceleration values, data were amenable to survival analysis statistical methodology to derive injury probability curves (IPCs). IPCs were derived for injury and fatality outcomes. RESULTS: Fatal injuries for both frontal and rear impacts were mostly at the cranio-vertebral junction. In addition to hemorrhage, fatal frontal and rear impact tests both produced predominantly atlanto-occipital dislocations, with and without spinal cord transection. After exclusions, IPCs were derived for frontal and rear impact for both (1) fatal outcome and (2) injurious outcome (any injury including fatal injury). For frontal impact, 53 NHP qualified with 5, 25, and 50% risk for fatality at 89, 105, and 114 peak sled Gs, respectively, and for injurious outcome at 70, 92, and 106 Gs, respectively. For rear impact, 34 NHP qualified with 5, 25, and 50% risk for fatality at 96, 122, 138 peak sled Gs, respectively, and for injurious outcome at 75, 99, and 115 Gs, respectively. CONCLUSIONS: The majority of injuries were at the cranio-vertebral junction, indicating that the inertial head mass caused a tensile loading mechanism to the cervical spine. These data may be used in conjunction with finite element modeling to estimate risks to the human population. The most direct application in the automotive environment could be to the well-restrained child. The Nij neck injury criteria, currently based on data from piglet studies, could also benefit because the NHP is a more accurate human surrogate. These types of tests are likely to never be repeated and will form an upper bound of tolerance information valuable to safety system designers.
Assuntos
Acidentes de Trânsito/estatística & dados numéricos , Bases de Dados Factuais , Primatas/fisiologia , Acidentes de Trânsito/mortalidade , Animais , Fenômenos Biomecânicos , Ferimentos e Lesões/etiologia , Ferimentos e Lesões/mortalidadeRESUMO
Quantification of biomechanical tolerance is necessary for injury prediction and protection of vehicular occupants. This study experimentally quantified lumbar spine axial tolerance during accelerative environments simulating a variety of military and civilian scenarios. Intact human lumbar spines (T12-L5) were dynamically loaded using a custom-built drop tower. Twenty-three specimens were tested at sub-failure and failure levels consisting of peak axial forces between 2.6 and 7.9 kN and corresponding peak accelerations between 7 and 57 g. Military aircraft ejection and helicopter crashes fall within these high axial acceleration ranges. Testing was stopped following injury detection. Both peak force and acceleration were significant (p < 0.0001) injury predictors. Injury probability curves using parametric survival analysis were created for peak acceleration and peak force. Fifty-percent probability of injury (95%CI) for force and acceleration were 4.5 (3.9-5.2 kN), and 16 (13-19 g). A majority of injuries affected the L1 spinal level. Peak axial forces and accelerations were greater for specimens that sustained multiple injuries or injuries at L2-L5 spinal levels. In general, force-based tolerance was consistent with previous shorter-segment lumbar spine testing (3-5 vertebrae), although studies incorporating isolated vertebral bodies reported higher tolerance attributable to a different injury mechanism involving structural failure of the cortical shell. This study identified novel outcomes with regard to injury patterns, wherein more violent exposures produced more injuries in the caudal lumbar spine. This caudal migration was likely attributable to increased injury tolerance at lower lumbar spinal levels and a faster inertial mass recruitment process for high rate load application. Published 2017. This article is a U.S. Government work and is in the public domain in the USA. J Orthop Res 36:1747-1756, 2018.
Assuntos
Aceleração , Vértebras Lombares/lesões , Vértebras Lombares/fisiologia , Postura , Adolescente , Adulto , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Caracteres Sexuais , Adulto JovemRESUMO
BACKGROUND: The authors present a case of delayed acute subdural hematoma and review all reported cases in the literature. The focus of this paper is to identify the subset of the population who are at risk, and determine whether they should be admitted for observation in the setting of mild traumatic brain injury. CASE DESCRIPTION: A 75-year-old woman taking daily aspirin (81 mg) had a fall with loss of consciousness. Her Glasgow Coma Scale (GCS) score was 15 at the time of presentation to the emergency department. However, because of her postconcussive symptoms, computed tomography (CT) of the head was obtained, and the results were negative for any intracranial hemorrhage or fractures. She was admitted for workup. The next day, she neurologically deteriorated to a GCS score of 6. CT of the head was reobtained and showed acute, left-sided subdural hematoma with shift and herniation. She was taken to operating room for emergent decompressive craniotomy. Postoperatively, she developed left-sided temporal and occipital intraparenchymal hemorrhage. She died after being placed on comfort care. CONCLUSION: Delayed acute subdural hematoma occurs mainly in the middle-aged or older population who are taking anticoagulation or antiplatelet therapy. Most patients have a GCS score of 15 with no loss of consciousness. Neurological deterioration occurs within the first 24 hours for 70% of the patients. Therefore, we recommend admission and observation of these selected group of patients. Due to small reported population of patients, we could not determine whether the patients taking anticoagulant, antiplatelet, or both anticoagulant and antiplatelet medication are at higher risk. In addition, the role of delayed CT of the head without change in the examination result needs to be explored further.
Assuntos
Acidentes por Quedas , Hemorragia Cerebral , Craniectomia Descompressiva/métodos , Hematoma Subdural Agudo/diagnóstico por imagem , Hematoma Subdural Intracraniano/diagnóstico por imagem , Complicações Pós-Operatórias , Inconsciência , Idoso , Aspirina/uso terapêutico , Feminino , Escala de Coma de Glasgow , Hematoma Subdural Agudo/cirurgia , Hematoma Subdural Intracraniano/cirurgia , Humanos , Inibidores da Agregação Plaquetária/uso terapêutico , Fatores de Tempo , Tomografia Computadorizada por Raios XRESUMO
Lumbar endplate fractures were investigated in different experimental scenarios, however the biomechanical effect of segmental alignment was not outlined. The objectives of this study were to quantify effects of spinal orientation on lumbar spine injuries during single-cycle compressive loads and understand lumbar spine endplate injury tolerance. Twenty lumbar motion segments were compressed to failure. Two methods were used in the preparation of the lumbar motion segments. Group 1 (n = 7) preparation maintained pre-test sagittal lordosis, whereas Group 2 (n = 13) specimens had a free-rotational end condition for the cranial vertebra, allowing sagittal rotation of the cranial vertebra to create parallel endplates. Five Group 1 specimens experienced posterior vertebral body fracture prior to endplate fracture, whereas two sustained endplate fracture only. Group 2 specimens sustained isolated endplate fractures. Group 2 fractures occurred at approximately 41% of the axial force required for Group 1 fracture (p < 0.05). Imaging and specimen dissection indicate endplate injury consistently took place within the confines of the endplate boundaries, away from the vertebral periphery. These findings indicate that spinal alignment during compressive loading influences the resulting injury pattern. This investigation identified the specific mechanical conditions under which an endplate breach will take place. Development of endplate injuries has significant clinical implication as previous research identified internal disc disruption (IDD) and degenerative disc disease (DDD) as long-term consequences of the axial load-shift that occurs following a breach of the endplate. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1084-1091, 2016.
Assuntos
Vértebras Lombares/lesões , Fraturas da Coluna Vertebral/etiologia , Adulto , Fenômenos Biomecânicos , Humanos , Pessoa de Meia-IdadeRESUMO
Experimental testing incorporating lumbar columns and isolated components is essential to advance the understanding of injury tolerance and for the development of safety enhancements. This study incorporated a whole column axial acceleration model and an isolated vertebral body model to quantify compression rates during realistic loading and compressive tolerance of vertebrae. Eight lumbar columns and 53 vertebral bodies from 23 PMHS were used. Three-factor ANOVA was used to determine significant differences (p<0.05) in physiologic and failure biomechanics based on compression rate, spinal level, and gender. Results demonstrated a significant increase in ultimate force (i.e., fracture) from lower to higher compression rates. Ultimate stress also increased with compression rate. Displacement and strain to failure were consistent at both compression rates. Differences in ultimate mechanics between vertebral bodies obtained from males and females demonstrated non-significant trends, with female vertebral bodies having lower ultimate force that would be associated with decreased injury tolerance. This was likely a result of smaller vertebrae in that population. Combined with existing literature, results presented in this manuscript contribute to the understanding of lumbar spine tolerance during axial loading events that occur in both military and civilian environments with regard to effects of compression rate and gender.
Assuntos
Fraturas Ósseas , Vértebras Lombares/lesões , Teste de Materiais , Feminino , Fraturas Ósseas/fisiopatologia , Humanos , Cinética , Vértebras Lombares/fisiopatologia , Masculino , Suporte de CargaRESUMO
BACKGROUND CONTEXT: Clinical studies have indicated that thoracolumbar trauma occurs in the civilian population at its junction. In contrast, injury patterns in military populations indicate a shift to the inferior vertebral levels of the lumbar spine. Controlled studies offering an explanation for such migrations and the associated clinical biomechanics are sparse in literature. PURPOSE: The goals of this study were to investigate the potential roles of acceleration loading on the production of injuries and their stability characteristics using a human cadaver model for applications to high-speed aircraft ejection and helicopter crashes. STUDY DESIGN: Biomechanical laboratory study using unembalmed human cadaver lumbar spinal columns. METHODS: Thoracolumbar columns from post-mortem human surrogates were procured, x-rays taken, intervertebral joints and bony components evaluated for degeneration, and fixed using polymethylmethacrylate. The inferior end was attached to a platform via a load cell and uniaxial accelerometer. The superior end was attached to the upper metal platform via a semi-circular cylinder. The pre-flexed specimen was preloaded to simulate torso mass. The ends of the platform were connected to the vertical post of a custom-designed drop tower. The specimen was dropped inducing acceleration loading to the column. Axial force and acceleration data were gathered at high sampling rates, filtered, and peak accelerations and inertia-compensated axial forces were obtained during the loading phase. Computed tomography images were used to identify and classify injuries using the three-column concept (stable vs. unstable trauma). RESULTS: The mean age, total body mass, and stature of the five healthy degeneration-free specimens were 42 years, 73 kg, and 167 cm. The first two specimens subjected to peak accelerations of approximately 200 m/sec(2) were classified as belonging to high-speed aircraft ejection-type and the other three specimens subjected to greater amplitudes (347-549 m/sec(2)) were classified as belonging to helicopter crash-type loadings. Peak axial forces for all specimens ranged from 4.8 to 7.2 kN. Ejection-type loaded specimens sustained single-level injuries to the L1 vertebra; one injury was stable and the other was unstable. Helicopter crash-type loaded specimens sustained injuries at inferior levels, including bilateral facet dislocation at L4-L5 and L2-L4 compression fractures, and all specimens were considered unstable at least at one spinal level. CONCLUSIONS: These findings suggest that the severity of spinal injuries increase with increasing acceleration levels and, more importantly, injuries shift inferiorly from the thoracolumbar junction to lower lumbar levels. Acknowledging that the geometry and load carrying capacity of vertebral bodies increase in the lower lumbar spine, involvement of inferior levels in trauma sparing the superior segments at greater acceleration inputs agree with military literature of caudal shift in injured levels. The present study offers an experimental explanation for the clinically observed caudal migration of spinal trauma in military populations as applied to high-speed aircraft ejection catapult and helicopter crashes.
Assuntos
Aceleração , Fraturas por Compressão/diagnóstico por imagem , Vértebras Lombares/lesões , Traumatismos da Coluna Vertebral/diagnóstico por imagem , Adulto , Fenômenos Biomecânicos/fisiologia , Feminino , Fraturas por Compressão/fisiopatologia , Humanos , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/fisiopatologia , Masculino , Pessoa de Meia-Idade , Militares , Radiografia , Traumatismos da Coluna Vertebral/fisiopatologiaRESUMO
OBJECT: Segmental instability in the lumbar spine can result from a number of mechanisms including intervertebral disc degeneration and facet joint degradation. Under traumatic circumstances, elevated loading may lead to mechanical yield of the annular fibers, which can decrease load-carrying capacity and contribute to instability. The purpose of this study was to quantify the biomechanics of intervertebral annular yield during tensile loading with respect to spinal level and anatomical region within the intervertebral disc. METHODS: This laboratory-based study incorporated isolated lumbar spine annular specimens from younger and normal or mildly degenerated intervertebral discs. Specimens were quasi-statically distracted to failure in an environmentally controlled chamber. Stress and strain associated with yield and ultimate failure were quantified, as was stiffness in the elastic and postyield regions. Analysis of variance was used to determine statistically significant differences based on lumbar spine level, radial position, and anatomical region of the disc. RESULTS: Annular specimens demonstrated a nonlinear response consisting of the following: toe region, linear elastic region, yield point, postyield region, and ultimate failure point. Regional dependency was identified between deep and superficial fibers. Mechanical yield was evident prior to ultimate failure in 98% of the specimens and occurred at approximately 80% and 74% of the stress and strain, respectively, to ultimate failure. Fiber modulus decreased by 34% following yield. CONCLUSIONS: Data in this study demonstrated that yielding of intervertebral disc fibers occurs relatively early in the mechanical response of the tissues and that stiffness is considerably decreased following yield. Therefore, yielding of annular fibers may result in decreased segmental stability, contributing to accelerated degeneration of bony components and possible idiopathic pain.
Assuntos
Disco Intervertebral/fisiologia , Instabilidade Articular/fisiopatologia , Vértebras Lombares/fisiologia , Adulto , Fenômenos Biomecânicos , Cadáver , Humanos , Instabilidade Articular/etiologia , Estresse Mecânico , Resistência à TraçãoRESUMO
BACKGROUND CONTEXT: The objective of the North American Spine Society's (NASS) Evidence-Based Clinical Guideline for the Diagnosis and Treatment of Lumbar Disc Herniation with Radiculopathy is to provide evidence-based recommendations to address key clinical questions surrounding the diagnosis and treatment of lumbar disc herniation with radiculopathy. The guideline is intended to reflect contemporary treatment concepts for symptomatic lumbar disc herniation with radiculopathy as reflected in the highest quality clinical literature available on this subject as of July 2011. The goals of the guideline recommendations are to assist in delivering optimum efficacious treatment and functional recovery from this spinal disorder. PURPOSE: To provide an evidence-based educational tool to assist spine specialists in the diagnosis and treatment of lumbar disc herniation with radiculopathy. STUDY DESIGN: Systematic review and evidence-based clinical guideline. METHODS: This guideline is a product of the Lumbar Disc Herniation with Radiculopathy Work Group of NASS' Evidence-Based Guideline Development Committee. The work group consisted of multidisciplinary spine care specialists trained in the principles of evidence-based analysis. A literature search addressing each question and using a specific search protocol was performed on English-language references found in Medline, Embase (Drugs and Pharmacology), and four additional evidence-based databases to identify articles. The relevant literature was then independently rated using the NASS-adopted standardized levels of evidence. An evidentiary table was created for each of the questions. Final recommendations to answer each clinical question were developed via work group discussion, and grades were assigned to the recommendations using standardized grades of recommendation. In the absence of Level I to IV evidence, work group consensus statements have been developed using a modified nominal group technique, and these statements are clearly identified as such in the guideline. RESULTS: Twenty-nine clinical questions were formulated and addressed, and the answers are summarized in this article. The respective recommendations were graded by strength of the supporting literature, which was stratified by levels of evidence. CONCLUSIONS: The clinical guideline has been created using the techniques of evidence-based medicine and best available evidence to aid practitioners in the care of patients with symptomatic lumbar disc herniation with radiculopathy. The entire guideline document, including the evidentiary tables, suggestions for future research, and all the references, is available electronically on the NASS Web site at http://www.spine.org/Pages/PracticePolicy/ClinicalCare/ClinicalGuidlines/Default.aspx and will remain updated on a timely schedule.
Assuntos
Deslocamento do Disco Intervertebral/diagnóstico , Deslocamento do Disco Intervertebral/cirurgia , Radiculopatia/diagnóstico , Radiculopatia/cirurgia , Discotomia , Medicina Baseada em Evidências , Glucocorticoides/administração & dosagem , Glucocorticoides/uso terapêutico , Humanos , Injeções Epidurais , Deslocamento do Disco Intervertebral/complicações , Deslocamento do Disco Intervertebral/tratamento farmacológico , Radiculopatia/tratamento farmacológico , Radiculopatia/etiologia , Recuperação de Função Fisiológica , Resultado do TratamentoRESUMO
BACKGROUND CONTEXT: The North American Spine Society's (NASS) Evidence-Based Clinical Guideline on Antibiotic Prophylaxis in Spine Surgery provides evidence-based recommendations to address key clinical questions regarding the efficacy and the appropriate antibiotic prophylaxis protocol to prevent surgical site infections in patients undergoing spine surgery. The guideline is intended to address these questions based on the highest quality clinical literature available on this subject as of June 2011. PURPOSE: Provide an evidence-based educational tool to assist spine surgeons in preventing surgical site infections. STUDY DESIGN: Systematic review and evidence-based clinical guideline. METHODS: This guideline is a product of the Antibiotic Prophylaxis in Spine Surgery Work Group of NASS Evidence-Based Guideline Development Committee. The work group consisted of neurosurgeons and orthopedic surgeons who specialize in spine surgery and are trained in the principles of evidence-based analysis. A literature search addressing each question and using a specific search protocol was performed on English language references found in MEDLINE (PubMed), ACP Journal Club, Cochrane Database of Systematic Reviews Database of Abstracts of Reviews of Effectiveness, Cochrane Central Register of Controlled Trials, EMBASE (Drugs and Pharmacology), and Web of Science to identify articles published since the search performed for the original guideline. The relevant literature was then independently rated using the NASS-adopted standardized levels of evidence. An evidentiary table was created for each of the questions. Final recommendations to answer each clinical question were developed via work group discussion, and grades were assigned to the recommendations using standardized grades of recommendation. In the absence of Levels I to IV evidence, work group consensus statements have been developed using a modified nominal group technique, and these statements are clearly identified as such in the guideline. RESULTS: Sixteen clinical questions were formulated and addressed, and the answers are summarized in this article. The respective recommendations were graded by the strength of the supporting literature, which was stratified by levels of evidence. CONCLUSIONS: The clinical guideline for antibiotic prophylaxis in spine surgery has been created using the techniques of evidence-based medicine and best available evidence to aid practitioners in the care of patients undergoing spine surgery. The entire guideline document, including the evidentiary tables, suggestions for future research, and all the references, is available electronically on the NASS Web site at http://www.spine.org/Pages/PracticePolicy/ClinicalCare/ClinicalGuidlines/Default.aspx and will remain updated on a timely schedule.