Molecular Engineering to Tune Functionality: The Case of Cl-Substituted [Fe(terpy)2]2.

The properties of transition-metal complexes and their chemical dynamics can be effectively modified with ligand substitutions, and theory can be a great aid to such molecular engineering. In this paper, we first theoretically explored how substitution with a Cl atom at different positions of the terpyridine ligand affects the electronic structure of the [Fe(terpy)2]2+ complex. We found that besides the substitution at position 4', the next most promising candidate to cause substantial electronic effects is that where the side pyridine ring is substituted at position 5 (ß). Therefore, next, we examined in detail the Fe(II) complexes of the 5-chloro and 5,5″-dichloro derivatives of terpy, theoretically and experimentally, to reveal how these substitutions modify the ground state properties and the lifetime of the excited quintet state in such complexes. In addition, we extend the investigation to the complexes of the analogously substituted derivatives of 4'-SMe-terpy. The substitution at position(s) 5 (and 5″) with Cl lowers the energy of the quintet state and increases its lifetime; the results on the 4'-SMe-substituted complexes show similar changes with these two substitutions, verifying that these effects are more or less additive. This study contributes to the enhancement of our molecular engineering toolset for modifying the potential energy landscape of similar complexes.

Investigation of the Deactivation and Reactivation Mechanism of a Heterogeneous Palladium(II) Catalyst in the Cycloisomerization of Acetylenic Acids by In Situ XAS .

A well-studied heterogeneous palladium(II) catalyst used for the cycloisomerization of acetylenic acids is known to be susceptible to deactivation through reduction. To gain a deeper understanding of this deactivation process and to enable the design of a reactivation strategy, in situ X-ray absorption spectroscopy (XAS) was used. With this technique, changes in the palladium oxidation state and coordination environment could be studied in close detail, which provided experimental evidence that the deactivation was primarily caused by triethylamine-promoted reduction of palladium(II) to metallic palladium nanoparticles. Furthermore, it was observed that the choice of the acetylenic acid substrate influenced the distribution between palladium(II) and palladium(0) species in the heterogeneous catalyst after the reaction. From the mechanistic insight gained through XAS, an improved catalytic protocol was developed that did not suffer from deactivation and allowed for more efficient recycling of the catalyst.

Site-Selective Real-Time Observation of Bimolecular Electron Transfer in a Photocatalytic System Using L-Edge X-Ray Absorption Spectroscopy*.

Time-resolved X-ray absorption spectroscopy has been utilized to monitor the bimolecular electron transfer in a photocatalytic water splitting system. This has been possible by uniting the local probe and element specific character of X-ray transitions with insights from high-level ab initio calculations. The specific target has been a heteroleptic [IrIII (ppy)2 (bpy)]+ photosensitizer, in combination with triethylamine as a sacrificial reductant and Fe3(CO)12 as a water reduction catalyst. The relevant molecular transitions have been characterized via high-resolution Ir L-edge X-ray absorption spectroscopy on the picosecond time scale and restricted active space self-consistent field calculations. The presented methods and results will enhance our understanding of functionally relevant bimolecular electron transfer reactions and thus will pave the road to rational optimization of photocatalytic performance.

EXAFS Study on the Coordination Chemistry of the Solvated Copper(II) Ion in a Series of Oxygen Donor Solvents.

The structures of the solvated copper(II) ion in water and nine organic oxygen donor solvents with similar electron-pair donor ability, but with different space-demanding properties at coordination, have been studied by EXAFS. N,N'-Dimethylpropyleneurea and N,N,N',N'-tetramethylurea are sufficiently space demanding at coordination to make the axial positions not accessible, resulting in square-planar copper(II) solvate complexes with an intense green color. The mean Cu-O bond distances in these two solvate complexes are 1.939(3) and 1.935(3) Å, respectively. The best fits of the remaining solvates, which are light blue in different hues, are obtained with a Jahn-Teller distorted-octahedral model consisting of four strongly bound solvent molecules in the equatorial positions at 1.96(2) Å and two in the axial positions but with different Cu-Oax bond distances: ca. 2.15 and 2.32 Å. This is in agreement with observations in solid-state structures of compounds containing hexaaquacopper(II) complexes crystallizing in noncentrosymmetric space groups and all reported crystal structures containing a [Cu(H2O)5(O-ligand)] complex with Jahn-Teller distortion. Such a structure is in agreement with previous EPR and EXAFS studies proving the hydrated copper(II) ion to be a noncentrosymmetric complex in aqueous solution. The refinements of the EXAFS data of the solids [Cu(H2O)6](ClO4)2, [Cu(H2O)6](BrO3)2, [Cu(H2O)6]SiF6, Cu(NO3)2·2.5H2O, and CuSO4·5H2O gave Cu-O bond distances significantly different from those reported in the crystallographic studies but similar to the configuration and bond distances in the hydrated copper(II) ion in aqueous solution. This may depend on whether the orientation of the axial positions is random in one or three dimensions, giving a mean structure of the solid with symmetry higher than that of the individual complexes. This study presents the very first experimental data from the new X-ray absorption spectroscopy beamline Balder at the MAX IV synchrotron radiation facility in Lund, Sweden, as well as the utilized properties of the beamline.

In Situ Structural Determination of a Homogeneous Ruthenium Racemization Catalyst and Its Activated Intermediates Using X-Ray Absorption Spectroscopy.

The activation process of a known Ru-catalyst, dicarbonyl(pentaphenylcyclopentadienyl)ruthenium chloride, has been studied in detail using time resolved in situ X-ray absorption spectroscopy. The data provide bond lengths of the species involved in the process as well as information about bond formation and bond breaking. On addition of potassium tert-butoxide, the catalyst is activated and an alkoxide complex is formed. The catalyst activation proceeds via a key acyl intermediate, which gives rise to a complete structural change in the coordination environment around the Ru atom. The rate of activation for the different catalysts was found to be highly dependent on the electronic properties of the cyclopentadienyl ligand. During catalytic racemization of 1-phenylethanol a fast-dynamic equilibrium was observed.

Highly Porous Amorphous Calcium Phosphate for Drug Delivery and Bio-Medical Applications.

Amorphous calcium phosphate (ACP) has shown significant effects on the biomineralization and promising applications in bio-medicine. However, the limited stability and porosity of ACP material restrict its practical applications. A storage stable highly porous ACP with Brunauer-Emmett-Teller surface area of over 400 m2/g was synthesized by introducing phosphoric acid to a methanol suspension containing amorphous calcium carbonate nanoparticles. Electron microscopy revealed that the porous ACP was constructed with aggregated ACP nanoparticles with dimensions of several nanometers. Large angle X-ray scattering revealed a short-range atomic order of <20 Å in the ACP nanoparticles. The synthesized ACP demonstrated long-term stability and did not crystallize even after storage for over 14 months in air. The stability of the ACP in water and an α-MEM cell culture medium were also examined. The stability of ACP could be tuned by adjusting its chemical composition. The ACP synthesized in this work was cytocompatible and acted as drug carriers for the bisphosphonate drug alendronate (AL) in vitro. AL-loaded ACP released ~25% of the loaded AL in the first 22 days. These properties make ACP a promising candidate material for potential application in biomedical fields such as drug delivery and bone healing.

Chemical equilibria of aqueous ammonium-carboxylate systems in aqueous bulk, close to and at the water-air interface.

Previous studies have shown that the water-air interface and a number of water molecule layers just below it, the surface region, have significantly different physico-chemical properties, such as lower relative permittivity and density, than bulk water. The properties in the surface region of water favor weakly hydrated species as neutral molecules, while ions requiring strong hydration and shielding of their charge are disfavored. In this study the equilibria NH4+(aq) + RCOO-(aq) ⇌ NH3(aq) + RCOOH(aq) are investigated for R = CnH2n+1, n = 0-8, as open systems, where ammonia and small carboxylic acids in the gas phase above the water surface are removed from the system by a gentle controlled flow of nitrogen to mimic the transport of volatile compounds from water droplets into air. It is shown that this non-equilibrium transport of chemicals can be sufficiently large to cause a change of the chemical content of the aqueous bulk. Furthermore, X-ray photoelectron spectroscopy (XPS) has been used to determine the relative concentration of alkyl carboxylic acids and their conjugated alkyl carboxylates in aqueous surfaces using a micro-jet. These studies confirm that neutral alkyl carboxylic acids are accumulated in the surface region, while charged species, as alkyl carboxylates, are depleted. The XPS studies show also that the hydrophobic alkyl chains are oriented upwards into regions with lower relative permittivity and density, thus perpendicular to the aqueous surface. These combined results show that there are several chemical equilibria between the aqueous bulk and the surface region. The analytical studies show that the release of mainly ammonia is dependent on its concentration in the surface region, as long as the solubility of the carboxylic acid in the surface region is sufficiently high to avoid a precipitation in/on the water-air interface. However, for n-octyl- and n-nonylcarboxylic acid the solubility is sufficiently low to cause precipitation. The combined analytical and surface speciation studies in this work show that the equilibria involving the surface region are fast. The results from this study increase the knowledge about the distribution of chemical species in the surface region at and close to the water-air interface, and the transport of chemicals from water to air in open systems.

Laboratory EXAFS determined structure of the stable complexes in the ternary Ni(ii)-EDTA-CN- system.

Aqueous solutions of the ternary system Ni(ii)-EDTA-CN- are investigated with X-ray Absorption Spectroscopy (XAS) as a function of cyanide concentration with an enhanced laboratory von Hámos X-ray spectrometer. The near-edge structure of the spectra identifies unambiguously the formation of the pentacyanidonickel(ii) complex at excess CN- concentrations. An analysis of the extended energy range of the XAS spectra reveals the molecular structure of the distinct molecular components present and provides a detailed description of the barely detectable mixed ligand [NiEDTA(CN)]3- complex. This thorough Extended X-ray Absorption Fine Structure (EXAFS) study demonstrates the potential of the emerging laboratory XAS spectrometers to become routine probes in various areas of chemistry, materials science, physics and related disciplines.

Amorphous Calcium Carbonate Constructed from Nanoparticle Aggregates with Unprecedented Surface Area and Mesoporosity.

Amorphous calcium carbonate (ACC), with the highest reported specific surface area of all current forms of calcium carbonate (over 350 m2 g-1), was synthesized using a surfactant-free, one-pot method. Electron microscopy, helium pycnometry, and nitrogen sorption analysis revealed that this highly mesoporous ACC, with a pore volume of ∼0.86 cm3 g-1 and a pore-size distribution centered at 8-9 nm, is constructed from aggregated ACC nanoparticles with an estimated average diameter of 7.3 nm. The porous ACC remained amorphous and retained its high porosity for over 3 weeks under semi-air-tight storage conditions. Powder X-ray diffraction, large-angle X-ray scattering, infrared spectroscopy, and electron diffraction exposed that the porous ACC did not resemble any of the known CaCO3 structures. The atomic order of porous ACC diminished at interatomic distances over 8 Å. Porous ACC was evaluated as a potential drug carrier of poorly soluble substances in vitro. Itraconazole and celecoxib remained stable in their amorphous forms within the pores of the material. Drug release rates were significantly enhanced for both drugs (up to 65 times the dissolution rates for the crystalline forms), and supersaturation release of celecoxib was also demonstrated. Citric acid was used to enhance the stability of the ACC nanoparticles within the aggregates, which increased the surface area of the material to over 600 m2 g-1. This porous ACC has potential for use in various applications where surface area is important, including adsorption, catalysis, medication, and bone regeneration.

Simultaneous Speciation, Structure, and Equilibrium Constant Determination in the Ni2+-EDTA-CN- Ternary System via High-Resolution Laboratory X-ray Absorption Fine Structure Spectroscopy and Theoretical Calculations.

Even quite simple chemical systems can involve many components and chemical states, and sometimes it can be very difficult to differentiate them by their hardly separable physical-chemical properties. The NiII-EDTA-CN- (EDTA = ethylenediaminetetraacetic acid) ternary system is a good example for this problem where, in spite of its fairly simple components and numerous investigations, several molecular combinations can exist, all of them not having been identified unambiguously yet. In order to achieve a detailed understanding of the reaction steps and chemical equilibria, methods are required in which the structural transitions in the different reaction steps can be followed via element-selective complex spectral feature sets. With the help of our recently developed von Hámos type high-resolution laboratory X-ray absorption spectrometer, both the structural variations and stability constants of the forming complexes were determined from the same measurement series, proving that X-ray absorption spectroscopy can be considered as a multifaced, table-top tool in coordination chemistry. Furthermore, with the help of theoretical calculations, independent structural evidence was also given for the formation of the [NiEDTA(CN)]3- mixed complex.

Laboratory von Hámos X-ray spectroscopy for routine sample characterization.

High energy resolution, hard X-ray spectroscopies are powerful element selective probes of the electronic and local structure of matter, with diverse applications in chemistry, physics, biology, and materials science. The routine application of these techniques is hindered by the complicated and slow access to synchrotron radiation facilities. Here we propose a new, economic, easily operated laboratory high resolution von Hámos type X-ray spectrometer, which offers rapid transmission experiments for X-ray absorption and is also capable of recording X-ray emission spectra. The use of a cylindrical analyzer crystal and a position sensitive detector enabled us to build a robust, flexible setup with low operational costs, while delivering synchrotron grade signal to noise measurements in reasonable acquisition times. We demonstrate the proof of principle and give examples for both measurement types. Finally, tracking of a several day long chemical transformation, a case better suited for laboratory than synchrotron investigation, is also presented.

Speciation and structure of tin(II) in hyper-alkaline aqueous solution.

The identity of the predominating tin(ii)-hydroxide complex formed in hyper-alkaline aqueous solutions (0.2 ≤CNaOH≤ 12 mol dm(-3)) is determined by potentiometric titrations, Raman, Mössbauer and XANES spectroscopy, supplemented by quantum chemical calculations. Thermodynamic studies using a H2/Pt electrode up to free hydroxide concentrations of 1 mol dm(-3) showed the presence of a single monomeric complex with a tin(II) : hydroxide ratio of 1 : 3. This observation together with Raman and Mössbauer spectroscopic measurements supplemented by quantum mechanical calculations proved that the predominating complex is [Sn(OH)3](-), and that the presence of the other possible complex, [SnO(OH)](-), could not be proven with either experiments or simulations. The structure of the trihydroxidostannate(II) complex, [Sn(OH)3](-), was determined by EXAFS and was found to be independent of the applied hydroxide and tin(II) concentrations. The mean Sn-O bond distance is short, 2.078 Å, and in very good agreement with the only structure reported in the solid state. It is also shown that at pH values above 13 the speciation of the predominant trihydroxidostannate(II) complex is not affected by the presence of high concentrations of chloride ions.

Speciation and the structure of lead(II) in hyper-alkaline aqueous solution.

The identity of the predominating lead(ii) species in hyper-alkaline aqueous solution has been determined by Raman spectroscopy, and ab initio quantum chemical calculations and its structure has been determined by EXAFS. The observed and calculated Raman spectra for the [Pb(OH)3](-) complex are in agreement while they are different for two-coordinated complexes and complexes containing Pb[double bond, length as m-dash]O double bonds. Predicted bond lengths are also consistent with the presence of [Pb(OH)3](-) and exclude the formation of Pb[double bond, length as m-dash]O double bond(s). These observations together with experimentally established analogies between lead(ii) and tin(ii) in hyper-alkaline aqueous solutions suggest that the last stepwise hydroxido complex of lead(ii) is [Pb(OH)3](-). The Pb-O bond distance in the [Pb(OH)3](-) complex as determined is remarkably short, 2.216 Å, and has low symmetry as no multiple back-scattering is observed. The [Pb(OH)3](-) complex has most likely trigonal pyramidal geometry as all reported three-coordinated lead(ii) complexes in the solid state. From single crystal X-ray data, the bond lengths for O-coordinated lead(ii) complexes with low coordination numbers are spread over an unusually wide interval, 2.216-2.464 Å for N = 3. The Pb-O bond distance is at the short side and within the range of three coordinated complexes, as also observed for the trihydroxidostannate(ii) complex indicating that the hydroxide ion forms short bonds with d(10)s(2) metal ions with occupied anti-bonding orbitals.

Multinuclear complex formation between Ca(II) and gluconate ions in hyperalkaline solutions.

Alkaline solutions containing polyhydroxy carboxylates and Ca(II) are typical in cementitious radioactive waste repositories. Gluconate (Gluc(-)) is a structural and functional representative of these sugar carboxylates. In the current study, the structure and equilibria of complexes forming in such strongly alkaline solutions containing Ca(2+) and gluconate have been studied. It was found that Gluc(-) significantly increases the solubility of portlandite (Ca(OH)2(s)) under these conditions and Ca(2+) complexes of unexpectedly high stability are formed. The mononuclear (CaGluc(+) and [CaGlucOH](0)) complexes were found to be minor species, and predominant multinuclear complexes were identified. The formation of the neutral [Ca2Gluc(OH)3](0) (log ß213 = 8.03) and [Ca3Gluc2(OH)4](0) (log ß324 = 12.39) has been proven via H2/Pt-electrode potentiometric measurements and was confirmed via XAS, (1)H NMR, ESI-MS, conductometry, and freezing-point depression experiments. The binding sites of Gluc(-) were identified from multinuclear NMR measurements. Besides the carboxylate group, the O atoms on the second and third carbon atoms were proved to be the most probable sites for Ca(2+) binding. The suggested structure of the trinuclear complex was deduced from ab initio calculations. These observations are of relevance in the thermodynamic modeling of radioactive waste repositories, where the predominance of the binuclear Ca(2+) complex, which is a precursor of various high-stability ternary complexes with actinides, is demonstrated.