Poly Organotin Acetates against DNA with Possible Implementation on Human Breast Cancer.

Two known tin-based polymers of formula {[R3Sn(CH3COO)]n} where R = n-Bu⁻ (1) and R = Ph⁻ (2),were evaluated for their in vitro biological properties. The compounds were characterized via their physical properties and FT-IR, 119Sn Mössbauer, and ¹H NMR spectroscopic data. The molecular structures were confirmed by single-crystal X-Ray diffraction crystallography. The geometry around the tin(IV) ion is trigonal bi-pyramidal. Variations in O⁻Sn⁻O···Sn' torsion angles lead to zig-zag and helical supramolecular assemblies for 1 and 2, respectively. The in vitro cell viability against human breast adenocarcinoma cancer cell lines: MCF-7 positive to estrogens receptors (ERs) and MDA-MB-231 negative to ERs upon their incubation with 1 and 2 was investigated. Their toxicity has been studied against normal human fetal lung fibroblast cells (MRC-5). Compounds 1 and 2 exhibit 134 and 223-fold respectively stronger antiproliferative activity against MDA-MB-231 than cisplatin. The type of the cell death caused by 1 or 2 was also determined using flow cytometry assay. The binding affinity of 1 and 2 towards the CT-DNA was suspected from the differentiation of the viscosity which occurred in the solution containing increasing amounts of 1 and 2. Changes in fluorescent emission light of Ethidium bromide (EB) in the presence of DNA confirmed the intercalation mode of interactions into DNA of both complexes 1 and 2 which have been ascertained from viscosity measurements. The corresponding apparent binding constants (Kapp) of 1 and 2 towards CT-DNA calculated through fluorescence spectra are 4.9 × 104 (1) and 7.3 × 104 (2) M-1 respectively. Finally, the type of DNA binding interactions with 1 and 2 was confirmed by docking studies.

Field-induced spin-flop in antiferromagnetic semiconductors with commensurate and incommensurate magnetic structures: Li2FeGeS4 (LIGS) and Li2FeSnS4 (LITS).

Li2FeGeS4 (LIGS) and Li2FeSnS4 (LITS), which are among the first magnetic semiconductors with the wurtz-kesterite structure, exhibit antiferromagnetism with TN ≈ 6 and 4 K, respectively. Both compounds undergo a conventional metamagnetic transition that is accompanied by a hysteresis; a reversible spin-flop transition is dominant. On the basis of constant-wavelength neutron powder diffraction data, we propose that LIGS and LITS exhibit collinear magnetic structures that are commensurate and incommensurate with propagation vectors km = [1/2, 1/2, 1/2] and [0, 0, 0.546(1)], respectively. The two compounds exhibit similar magnetic phase diagrams, as the critical fields are temperature-dependent. The nuclear structures of the bulk powder samples were verified using time-of-flight neutron powder diffraction along with synchrotron X-ray powder diffraction. (57)Fe and (119)Sn Mössbauer spectroscopy confirmed the presence of Fe(2+) and Sn(4+) as well as the number of crystallographically unique positions. LIGS and LITS are semiconductors with indirect and direct bandgaps of 1.42 and 1.86 eV, respectively, according to optical diffuse-reflectance UV-vis-NIR spectroscopy.

Enhanced photochemical hydrogen evolution from Fe4S4-based biomimetic chalcogels containing M2+ (M = Pt, Zn, Co, Ni, Sn) centers.

Naturally abundant enzymes often feature active sites comprising transition metal cluster units that catalyze chemical processes and reduce small molecules as well as protons. We introduce a family of new chalcogenide aerogels (chalcogels), aiming to model the function of active sites and the structural features of a larger protective framework. New metal incorporated iron sulfur tin sulfide chalcogels referred to as ternary chalcogels and specifically the chalcogels M-ITS-cg3, fully integrate biological redox-active Fe4S4 clusters into a semiconducting porous framework by bridging them with Sn4S10 linking units. In the M-ITS-cg3 system we can tailor the electro- and photocatalytic properties of chalcogels through the control of spatial distance of redox-active Fe4S4 centers using additional linking metal ions, M(2+) (Pt, Zn, Co, Ni, Sn). The presence of a third metal does not change the structural properties of the biomimetic chalcogels but modifies and even enhances their functional performance. M-ITS-cg3s exhibit electrocatalytic activity in proton reduction that arises from the Fe4S4 clusters but is tuned inductively by M(2+). The metal ions alter the reduction potential of Fe4S4 in a favorable manner for photochemical hydrogen production. The Pt incorporated ITS-cg3 shows the greatest improvement in the overall hydrogen yield compared to the binary ITS-cg3. The ability to manipulate the properties of biomimetic chalcogels through synthetic control of the composition, while retaining both structural and functional properties, illustrates the chalcogels' flexibility and potential in carrying out useful electrochemical and photochemical reactions.

Nanoscale zero-valent iron supported on mesoporous silica: characterization and reactivity for Cr(VI) removal from aqueous solution.

MCM-41-supported nanoscale zero-valent iron (nZVI) was sytnhesized by impregnating the mesoporous silica martix with ferric chloride, followed by chemical reduction with NaHB4. The samples were studied with a combination of characterization techniques such as powder X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) and Mössbauer spectroscopy, N2 adsorption measurements, transmission electron microscopy (TEM), magnetization measurements, and thermal analysis methods. The experimental data revealed development of nanoscale zero-valent iron particles with an elliptical shape and a maximum size of ∼80 nm, which were randomly distributed and immobilized on the mesoporous silica surface. Surface area measurements showed that the porous MCM-41 host matrix maintains its hexagonal mesoporous order structure and exhibits a considerable high surface area (609 m(2)/g). Mössbauer and magnetization measurements confirmed the presence of core-shell iron nanoparticles composed of a ferromagnetic metallic core and an oxide/hydroxide shell. The kinetic studies demonstrated a rapid removal of Cr(VI) ions from the aqueous solutions in the presence of these stabilized nZVI particles on MCM-41, and a considerably increased reduction capacity per unit mass of material in comparison to that of unsupported nZVI. The results also indicate a highly pH-dependent reduction efficiency of the material, whereas their kinetics was described by a pseudo-first order kinetic model.

Effect of [Fe(CN)6]4- substitutions on the spin-flop transition of a layered nickel phyllosilicate.

A 3 to 1 Ni/Si antiferromagnetic layered phyllosilicate, Ni(3)Si(C(3)H(6)NH(3))F(0.65)O(1.9)(OH)(4.45)(CH(3)COO)(1.1)·xH(2)O, was modified with K(4)[Fe(CN)(6)]·3H(2)O. This compound retained its ordering as proved by X-ray diffraction, while infrared spectra revealed the presence of [Fe(CN)(6)](4-) groups and X-ray photoelectron spectroscopy showed that the latter partially substitute the acetate groups. Both the parent and the modified compound are canted antiferromagnets with an anisotropy perpendicular to the layers and show spin-flop transitions. For the parent compound, a single step spin-flop occurs at H = 24 kOe. The modified compound shows increased antiferromagnetic canting and a two-step transition (H(1) = 24 kOe, H(2) = 48 kOe). These results testify to the existence of competing interactions that depend sensitively on the grafted species.

Synthesis and characterization of γ-Fe2O3/carbon hybrids and their application in removal of hexavalent chromium ions from aqueous solutions.

Magnetic Fe(2)O(3)/carbon hybrids were prepared in a two-step process. First, acetic acid vapor interacted with iron cations dispersed on the surface of a nanocasted ordered mesoporous carbon (CMK-3). In the second step, the primarily created iron acetate species underwent pyrolysis and transformed to magnetic iron oxide nanoparticles. X-ray diffraction, Fourier-transform infrared, and Raman spectroscopies were used for the chemical and structural characterization of the hybrids, while surface area measurements, thermal analysis, and transmission electron microscopy were employed to determine their physical, surface, and textural properties. These results revealed the preservation of the host carbon structure, which was homogenously and controllably loaded (up to 27 wt %) with nanosized (ca. 20 nm) iron oxides inside the mesoporous system. Mössbauer spectroscopy and magnetic measurements at low temperatures confirmed the formation of γ-Fe(2)O(3) nanoparticles exhibiting superparamagnetic behavior. The kinetic studies showed a rapid removal of Cr(VI) ions from the aqueous solutions in the presence of these magnetic mesoporous hybrids and a considerably increased adsorption capacity per unit mass of sorbent in comparison to that of pristine CMK-3 carbon. The results also indicate highly pH-dependent sorption efficiency of the hybrids, whereas their kinetics was described by a pseudo-second-order kinetic model. Taking into account the simplicity of the synthetic procedure and possibility of magnetic separation of hybrids with immobilized pollutant, the developed mesoporous nanomaterials have quite real potential for applications in water treatment technologies.

Light-Induced Bistability in Iron(III) Spin-Transition Compounds of 5 X-Salicylaldehyde Thiosemicarbazone (X=H, Cl, Br).

The iron(III) spin-crossover compounds [Fe(Hthsa)(thsa)]⋅H2 O (1), [Fe(Hth5Clsa)(th5Clsa)2 ]⋅H2 O (2), and [Fe(Hth5Brsa)(th5Brsa)2 ]⋅H2 O (3) (H2 thsa=salicylaldehyde thiosemicarbazone, H2 th5Clsa=5-chlorosalicylaldehyde thiosemicarbazone, and H2 th5Brsa=5-bromosalicylaldehyde thiosemicarbazone) have been synthesized and their spin-transition properties investigated by magnetic susceptibility, Mössbauer spectroscopy, and differential scanning calorimetry measurements. The three compounds exhibit an abrupt spin transition with a thermal hysteresis effect. The more polarizable the substituent on the salicylaldehyde moiety, the more complete is the transition at room temperature with an increased degree of cooperativity. The molecular structures of 1 and 2 in the high-spin state are revealed. The occurrence of the light-induced excited-spin-state trapping phenomenon appears to be dependent on the substituent incorporated into the 5-position of the salicylaldehyde subunit. Whereas the compounds with an electron-withdrawing group (-Br or -Cl) exhibit light-induced trapped excited high-spin states with great longevity of metastability, the halogen-free compound does not, even though strong intermolecular interactions (such as hydrogen-bonding networks and π stacking) operate in the system. For compound 2, the surface level of photoconversion is less than 35 %. In contrast, compound 3 displays full photoexcitation.

Molecular supertetrahedron decorated with exposed sulfonate groups built from mixed-valence tetranuclear Fe3(3+)Fe(2+)(mu3-Omicron)(mu3-SO4)3(-CO2)3 clusters.

We present the synthesis and characterization of a novel metal-organic molecular solid using the ligand 4,8-disulfonaphthalene-2,6-dicarboxylic acid. The solid features a sulfonated, isolated supertetrahedra, [Fe(16)Omicron(4)(SO(4))(12)(L2)(6)], built from mixed-valence [Fe(3)(3+)Fe(2+)(mu(3)-Omicron)(mu(3)-SO(4))(3)(-CO(2))(3)] clusters.

Synthesis, characterization, and biological studies of organotin(IV) derivatives with o- or p-hydroxybenzoic acids.

Organotin(IV) complexes with o- or p-hydroxybenzoic acids (o-H(2)BZA or p-H(2)BZA) of formulae [R(2)Sn(HL)(2)] (where H(2)L = o-H(2)BZA and R = Me- (1), n-Bu- (2)); [R(3)Sn(HL)] (where H(2)L = o-H(2)BZA and R = n-Bu- (3), Ph- (4) or H(2)L = p-H(2)BZA and R = n-Bu- (5), Ph- (6)) were synthesized by reacting a methanolic solution of di- and triorganotin(IV) compounds with an aqueous solution of the ligand (o-H(2)BZA or p-H(2)BZA) containing equimolar amounts of potassium hydroxide. The complexes were characterized by elemental analysis, FT-IR, Far-IR, TGA-DTA, FT-Raman, Mössbauer spectroscopy, (1)H, (119)Sn-NMR, UV/Vis spectroscopy, and Mass spectroscopy. The X-ray crystal structures of complexes 1 and 2 have also been determined. Finally, the influence of these complexes 1-6 upon the catalytic peroxidation of linoleic acid to hydroperoxylinoleic acid by the enzyme lipoxygenase (LOX) was kinetically studied and the results showed that triorganotin(IV) complex 6 has the lowest IC(50) value. Also complexes 1-6 were studied for their in vitro cytotoxicity against sarcoma cancer cells (mesenchymal tissue) from the Wistar rat, and the results showed that the complexes have high activity against these cell lines with triphenyltin((IV) complex 4 to be the most active one.

CaFe4As3: a metallic iron arsenide with anisotropic magnetic and charge-transport properties.

The iron arsenide CaFe(4)As(3) features a three-dimensional network derived from intergrown Fe(2)As(2) layers and Ca ions in channels. Complex magnetic interactions between Fe atoms give rise to unexpected transitions and novel direction-dependent magnetic behavior.

(H2NC4H8NCH2CH2NH2)2Zn2Sn2Se7: a hybrid ternary semiconductor stabilized by amine molecules acting simultaneously as ligands and counterions.

A hybrid, organic-inorganic ternary semiconductor with chemical formula (H2NC4H8NCH2CH2NH2)2Zn2Sn2Se7 is reported in which the organic molecules have a dual role, acting simultaneously as ligands and charge balancing cations.

Straightforward route to the adamantane clusters [Sn4Q10]4- (Q = S, Se, Te) and use in the assembly of open-framework chalcogenides (Me4N)2M[Sn4Se10] (M = Mn(II), Fe(II), Co(II), Zn(II)) including the first telluride member (Me4N)2Mn[Ge4Te10].

The reaction of K(2)Sn(2)Q(5) (Q = S, Se, Te) with stoichiometric amounts of alkyl-ammonium bromides R(4)NBr (R = methyl or ethyl) in ethylenediamine (en) afforded the corresponding salts (R(4)N)(4)[Sn(4)Q(10)] (Q = S, Se, Te) in high yield. Although the compound K(2)Sn(2)Te(5) is not known, this reaction is also applicable to solids with a nominal composition "K(2)Sn(2)Te(5)" which in the presence of R(4)NBr in en are quantitatively converted to the salts (R(4)N)(4)[Sn(4)Te(10)] on a multigram scale. These salts contain the molecular adamantane clusters [Sn(4)Q(10)](4-) and can serve as soluble precursors in simple metathesis reactions with transition metal salts to synthesize the large family of open-framework compounds (Me(4)N)(2)M[Sn(4)Se(10)] (M = Mn(2+), Fe(2+), Co(2+), Zn(2+)). Full structural characterization of these materials as well as their magnetic and optical properties is reported. Depending on the transition metal in (Me(4)N)(2)M[Sn(4)Se(10)], the energy band gaps of these compounds lie in the range of 1.27-2.23 eV. (Me(4)N)(2)Mn[Ge(4)Te(10)] is the first telluride analogue to be reported in this family. This material is a narrow band gap semiconductor with an optical absorption energy of 0.69 eV. Ab initio electronic band structure calculations validate the semiconductor nature of these chalcogenides and indicate a nearly direct band gap.

Novel nanohybrids derived from the attachment of FePt nanoparticles on carbon nanotubes.

Multiwalled carbon nanotubes (MWCNTs) were used as nanotemplates for the dispersion and stabilization of FePt nanoparticles (NPs). Pre-formed capped FePt NPs were connected to the MWCNTs external surface via covalent binding through organic linkers. Free FePt NPs and MWCNTs-FePt hybrids were annealed in vacuum at 700 degrees C in order to achieve the L1(0) ordering of the FePt phase. Both as prepared and annealed samples were characterized and studied using a combination of experimental techniques, such as Raman and Mössbauer spectroscopies, powder X-ray Diffraction (XRD), magnetization and transmittion electron microscopy (TEM) measurements. TEM measurements of the hybrid sample before annealing show that a fine dispersion of NPs along the MWCNTs surface is achieved, while a certain amount of free particles attached to each other in well connected dense assemblies of periodical or non-periodical particle arrangements is also observed. XRD measurements reveal that the FePt phase has the face-centered cubic (fcc) disordered crystal structure in the as prepared samples, which is transformed to the face-centered tetragonal (fct) L1(0) ordered crystal structure after annealing. An increase in the average particle size is observed after annealing, which is higher for the free NPs sample. Superparamagnetic phenomena due to the small FePt particle size are observed in the Mössbauer spectra of the as prepared samples. Mössbauer and magnetization measurements of the MWCNTs-FePt hybrids sample reveal that the part of the FePt particles attached to the MWCNTs surface shows superparamagnetic phenomena at RT even after the annealing process. The hard magnetic L1(0) phase characteristics are evident in the magnetization measurements of both samples after annealing, with the coercivity of the hybrid sample over-scaling that of the free NPs sample by a factor of 1.25.

Synthesis, structural characterization, and biological studies of six- and five-coordinate organotin(IV) complexes with the thioamides 2-mercaptobenzothiazole, 5-chloro-2-mercaptobenzothiazole, and 2-mercaptobenzoxazole.

Organotin(IV) complexes with the formulas [(C6H5)3Sn(mbzt)] (1), [(C6H5)3Sn(cmbzt)] (3), and [(C6H5)2Sn(cmbzt)2] (4) (Hmbzt = 2-mercaptobenzothiazole and Hcmbzt = 5-chloro-2-mercaptobenzothiazole) have been synthesized and characterized by elemental analysis; FT-IR, Raman, 1H, 13C, and 119Sn NMR, and Mössbauer spectroscopic techniques; and X-ray crystallography at various temperatures. The crystal structures of complexes 1, 3, and 4 were determined by X-ray diffraction at room temperature [295(1) or 293(2) K]. The complexes [(C6H5)3Sn(mbzo)] (2) and [(n-C4H9)2Sn(cmbzt)2] (5) (Hmbzo = 2-mercaptobenzoxazole) were synthesized by new improved methods, and their structures were determined at low temperature [100(1) K] and compared to those solved at room temperature. Comparison with {(CH3)2Sn(cmbzt)2]} (6), already reported, was also attempted. The influence of temperature on the geometry of the complexes is discussed. In the cases of complexes 1-3, three carbon atoms from phenyl groups and one sulfur atom and one nitrogen atom from thione ligands form a tetrahedrally distorted trigonal-bipyramidal geometry around the five-coordinate tin(IV) ion. In complexes 4-6, two carbon atoms from aryl groups and two sulfur atoms and two nitrogen atoms from thione ligands form a distorted tetrahedral geometry, tending toward octahedral, around the six-coordinate tin(IV) ions, with trans-C2, cis-N2, and cis-S2 configurations. Although the C-Sn and S-Sn bond distances are found to be constant in compounds 1-6, their N-Sn bond lengths vary significantly (from 2.635 to 3.078 A), with the longer distances found in the cases of five-coordinate complexes 1-3.

Carbon nanotubes encapsulating superconducting single-crystalline tin nanowires.

Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15-35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (Hc) more than 30 times higher than the value of bulk metallic tin.

Periodic hexagonal mesostructured chalcogenides based on platinum and [SnSe4]4- and [SnTe4]4- precursors. Solvent dependence of nanopore and wall organization.

Mesostructured chalcogenide-based materials with long-range order and semiconducting properties can be prepared using suitable molecular building blocks, linkage metal ions and surfactant molecules. In this paper we present surfactant templated, open framework platinum tin selenide and telluride materials assembled using K4SnQ4 (Q = Se, Te) salts and K2PtCl4 as precursors and a study of pore and wall organization. We find that materials prepared in water exhibit disordered pore organization, whereas those prepared in formamide are long-range ordered with hexagonal symmetry. In formamide the [SnQ4]4- anions undergo condensation-oligomerization reactions that produce different chalcogenido molecular species, whereas in water the anions remain intact. In addition to solvent, the pore organization and overall quality of the mesostructured materials strongly depend on the surfactant molecules, i.e., chain length and headgroup size. For example, highly ordered mesostructured platinum tin selenides with hexagonal symmetry were obtained using the hydroxyl-functionalized surfactants CnH2n+1N(CH3)(CH2CH2OH)2Br (n = 16, 18, and 20), but when the headgroup was triethylammonium, hexagonal pore order was achieved only for n = 20 and not for n = 16 and 18. The experimental results imply that in order to achieve highly ordered chalcogenide frameworks a single building anionic block might be insufficient. Finally, we also report the first examples of hexagonal mesostructured Pt/Sn/Te materials based on K4SnTe4 as the precursor. The tellurides behave differently for their selenium analogues and have very low energy band gaps, in the range 0.5-0.7 eV.

Incorporation of fullerene derivatives into smectite clays: a new family of organic-inorganic nanocomposites.

Three fulleropyrrolidine derivatives, characterized by the presence of positive charges, were introduced in the interlayer space of montmorillonite. The composites were characterized by powder X-ray diffraction and differential thermal and thermogravimetric (DTA-TGA) analysis, in conjunction with FTIR, UV-Vis, Raman, and (57)Fe-Mössbauer spectroscopies. Organophilic derivatives were intercalated into organically modified clays, while water-soluble fulleropyrrolidines were introduced into the clay galleries through ion exchange. The experiments, complemented by computer simulations, show that not all the clay-clay platelets are intercalated by the fullerene derivatives and that a sizable amount of charge transfer takes place between the host and the guests.

Organotin(IV) derivatives of L-cysteine and their in vitro anti-tumor properties.

The synthesis and characterization of the organotin compounds [(n-C(4)H(9))(2)Sn(cys)] (1), [(C(6)H(5))(2)Sn(cys)] (2), [(C(6)H(5))(3)Sn(Hcys).(H(2)o)] (3), {[(CH(3))(2)Sn(Kcys)(2)].2(H(2)0)} (4), {[(n-C(4)H(9))(2)Sn(Kcys)(2)].2(H(2)0)} (5) and {[(C(6)H(5))(2)Sn(Kcys)(2)].2(H(2)0)} (6) (where H(2)cys = L-cysteine) are reported. The compounds have been characterized by elemental analysis and (1)H-NMR, Uv-Vis, FT-IR and MOssbauer spectroscopic techniques. Attempted recrystallization of (2) in DMSO/methanol 2:1 solution yielded after several days unexpectedly the dimeric compound bis(tri-phenyltin)sulphide {[(C(6)H(5))(3)Sn](2)S} (7) which has been characterized by x-ray analysis. The structure of the parent complex (2) as well as the mechanism of the decomposition of cysteine are being further investigated. The in vitro anticancer activity of complexes (I)- (6), against human leukemia (HL60), human liver (Bel7402), human stomach (BGC823) and human cervix epithelial human carcinoma (Hela), nasopharyngeal carcinoma (KB) and lung cancer (PG) tumor cells, were evaluated.

Synthesis, structural characterization and in vitro cytotoxicity of organotin(IV) derivatives of heterocyclic thioamides, 2-mercaptobenzothiazole, 5-chloro-2-mercaptobenzothiazole, 3-methyl-2-mercaptobenzothiazole and 2-mercaptonicotinic acid.

Five new organotin(IV) molecules with the heterocyclic thioamides; 2-mercaptobenzothiazole (Hmbzt), 5-chloro-2-mercaptobenzothiazole (Hcmbzt), 3-methyl-2-mercaptobenzothiazole (mmbzt) and 2-mercaptonicotinic acid (H(2)mna) of formulae [(n-C(4)H(9))(2)Sn(mbzt)(2)] (1), [(C(6)H(5))(2)Sn(mbzt)(2)] (2), [(CH(3))(2)Sn(cmbzt)(2)].1.7(H(2)O)] (3), [(n-C(4)H(9))(2)SnCl(2)(mmbzt)(2).(CH(2)Cl(2))] (4) and [[(C(6)H(5))(3)Sn](2)(mna).[(CH(3))(2)CO]] (5) have been synthesized and characterized by elemental analysis, 1H-, 13C-NMR, FT-IR and Mössbauer spectroscopic techniques. Crystal structures of molecules 1, 3 and 5 have been determined by X-ray diffraction at 173(1) K (1 and 5) and 293(2) K (3). Compound 1 C(22)H(26)N(2)S(4)Sn, is monoclinic, space group C2/c, a=44.018(2), b=8.8864(5), c=12.8633(7) A, beta=104.195(5) degrees, Z=8. Compound 3 is also monoclinic, space group P2(1)/c and a=17.128(2) A, b=17.919(2) A, c=7.3580(10) A, beta=98.290(10) degrees, Z=4. In both molecules 1 and 3, two carbon atoms from aryl groups, two sulfur and two nitrogen atoms from thione ligands form a distorted octahedral geometry around tin(IV) with trans-C(2), cis-N(2), cis-S(2) configurations. Compound 5 C(45)H(39)NO(3)SSn(2) is monoclinic, space group P2(1)/n, a=9.1148(2) A, b=29.2819(6), c=15.5556(4) A, beta=106.2851(9) degrees, Z=4. Complex 5 contains two [(C(6)H(5))(3)Sn(IV)] moieties linked by a double deprotonated 2-mercaptonicotinic acid (H(2)mna). Both tin(IV) ions are five coordinated. This complex is the an example of a pentacoordinated Ph(3)SnXY system with an axial-equatorial arrangement of the phenyl groups at Sn(1) atom. Compounds 1, 3 and 5 were tested for in vitro cytotoxicity against the cancer cell line of sarcoma cells (mesenchymal tissue) from the Wistar rat, polycyclic aromatic hydrocarbons (benzo[a]pyrene) carcinogenesis. Compound 5 exhibits strong cytotoxic activity, while complexes 1 and 3 show less cytotoxic activity.

Isolation of the new cubic phases RE4FeGa(12-x)Ge(x) (RE = Sm, Tb; x = 2.5) from molten gallium: single-crystal neutron diffraction study of the Ga/Ge distribution.

The compounds RE4FeGa(12-x)Ge(x) (RE = Sm, Tb) were discovered in reactions employing molten Ga as a solvent at 850 degrees C. However, the isostructural Y4FeGa(12-x)Ge(x) was prepared from a direct combination reaction. The crystal structure is cubic with space group Imm, Z = 2, and a = 8.657(4) A and 8.5620(9) A for the Sm and Tb analogues, respectively. Structure refinement based on full-matrix least squares on F(o)2 resulted in R1 = 1.47% and wR2 = 4.13% [I > 2(I)] for RE = Sm and R1 = 2.29% and wR2 = 7.12% [I > 2(I)] for RE = Tb. The compounds crystallize in the U4Re7Si6 structure type, where the RE atoms are located on 8c (1/4, 1/4, 1/4) sites and the Fe atoms on 2a (0, 0, 0) sites. The distribution of Ga and Ge in the structure, investigated with single-crystal neutron diffraction on the Tb analogue, revealed that these atoms are disordered over the 12d (1/4, 0, 1/2) and 12e (x, 0, 0) sites. The amount of Ga/Ge occupying the 12d and 12e sites refined to 89(4)/11 and 70(4)/30%, respectively. Transport property measurements indicate that these compounds are metallic conductors. Magnetic susceptibility measurements and Mössbauer spectroscopy performed on the Tb analogue show a nonmagnetic state for Fe, while the Tb atoms carry a magnetic moment corresponding to a mu(eff) of 9.25 mu(B).