Bifunctional Co3O4/g-C3N4 Hetrostructures for Photoelectrochemical Water Splitting.

This study explored the synergistic potential of photoelectrochemical water splitting through bifunctional Co3O4/g-C3N4 heterostructures. This novel approach merged solar panel technology with electrochemical cell technology, obviating the need for external voltage from batteries. Scanning electron microscopy and X-ray diffraction were utilized to confirm the surface morphology and crystal structure of fabricated nanocomposites; Co3O4, Co3O4/g-C3N4, and Co3O4/Cg-C3N4. The incorporation of carbon into g-C3N4 resulted in improved catalytic activity and charge transport properties during the visible light-driven hydrogen evolution reaction and oxygen evolution reaction. Optical properties were examined using UV-visible spectroscopy, revealing a maximum absorption edge at 650 nm corresponding to a band gap of 1.31 eV for Co3O4/Cg-C3N4 resulting in enhanced light absorption. Among the three fabricated electrodes, Co3O4/Cg-C3N4 exhibited a significantly lower overpotential of 30 mV and a minimum Tafel slope of 112 mV/dec This enhanced photoelectrochemical efficiency was found due to the established Z scheme heterojunction between Co3O4 and gC3N4. This heterojunction reduced the recombination of photogenerated electron-hole pairs and thus promoted charge separation by extending visible light absorption range chronoamperometric measurements confirmed the steady current flow over time under constant potential from the solar cell, and thus it provided the effective utilization of bifunctional Co3O4/g-C3N4 heterostructures for efficient solar-driven water splitting.

Chemical Composition Antioxidant and Anti-Inflammatory Activities of Myrtus communis L. Leaf Extract: Forecasting ADMET Profiling and Anti-Inflammatory Targets Using Molecular Docking Tools.

Compounds derived from natural sources continue to serve as chemical scaffolds for designing prophylactic/therapeutic options for human healthcare. In this study, we aimed to systematically unravel the chemical profile and antioxidant and anti-inflammatory activities of myrtle methanolic extract (MMEx) using in vitro, in vivo, and in silico approaches. High levels of TPC (415.85 ± 15.52 mg GAE/g) and TFC (285.80 ± 1.64 mg QE/g) were observed. Mass spectrophotometry (GC-MS) analysis revealed the presence of 1,8-cineole (33.80%), α-pinene (10.06%), linalool (4.83%), p-dimethylaminobenzophenone (4.21%), thunbergol (4%), terpineol (3.60%), cis-geranyl acetate (3.25%), and totarol (3.30%) as major compounds. MMEx induced pronounced dose-dependent inhibition in all assays, and the best antioxidant activity was found with H2O2, with an IC50 of 17.81 ± 3.67 µg.mL-1. MMEx showed a good anti-inflammatory effect in vivo by limiting the development of carrageenan-induced paw edema. The pharmacokinetic profiles of the active molecules were determined using the SwissADME website, followed by virtual screening against anti-inflammatory targets including phospholipase A2 (PLA-2), cyclooxygenase-2 (COX-2), tumor necrosis factor alpha (TNF-α), interleukin-1ß (IL-1ß), and NF-κB. A pharmacokinetic study revealed that the molecules have good absorption, distribution, and metabolism profiles, with negative organ toxicity. Among the compounds identified by GC-MS analysis, pinostrobin chalcone, cinnamyl cinnamate, hedycaryol, totarol, and p-dimethylaminobenzophenone were observed to have good binding scores, thus appreciable anti-inflammatory potential. Our study reveals that MMEx from Algerian Myrtus communis L. can be considered to be a promising candidate for alleviating many health complaints associated with oxidative stress and inflammation.

Fabrication and Characterization of a Poly(3,4-ethylenedioxythiophene)@Tungsten Trioxide-Graphene Oxide Hybrid Electrode Nanocomposite for Supercapacitor Applications.

With the rapid development of nanotechnology, the study of nanocomposites as electrode materials has significantly enhanced the scope of research towards energy storage applications. Exploring electrode materials with superior electrochemical properties is still a challenge for high-performance supercapacitors. In the present research article, we prepared a novel nanocomposite of tungsten trioxide nanoparticles grown over supported graphene oxide sheets and embedded with a poly(3,4-ethylenedioxythiophene) matrix to maximize its electrical double layer capacitance. The extensive characterization shows that the poly(3,4-ethylenedioxythiophene) matrix was homogeneously dispersed throughout the surface of the tungsten trioxide-graphene oxide. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide exhibits a higher specific capacitance of 478.3 F·g-1 at 10 mV·s-1 as compared to tungsten trioxide-graphene oxide (345.3 F·g-1). The retention capacity of 92.1% up to 5000 cycles at 0.1 A·g-1 shows that this ternary nanocomposite electrode also exhibits good cycling stability. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide energy density and power densities are observed to be 54.2 Wh·kg-1 and 971 W·kg-1. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide has been shown to be a superior anode material in supercapacitors because of the synergistic interaction of the poly(3,4-ethylenedioxythiophene) matrix and the tungsten trioxide-graphene oxide surface. These advantages reveal that the poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide electrode can be a promising electroactive material for supercapacitor applications.

Unveiling the Chemical Profiling Antioxidant and Anti-Inflammatory Activities of Algerian Myrtus communis L. Essential Oils, and Exploring Molecular Docking to Predict the Inhibitory Compounds against Cyclooxygenase-2.

Considering the large spectrum of side effects caused by synthetic drugs and the development of natural alternatives utilizing Algerian flora, this study aimed to place a spotlight on the chemical profile and antioxidant and anti-inflammatory activities of Myrtus communis L. essential oils (MCEOs). In this study, essential oils (EOs) were collected via hydro-distillation of the plant's leaves, and a chemical constituent analysis was performed using gas chromatography-mass spectrophotometry (GC-MS). The in vitro antioxidant activity was evaluated using DPPH, ABTS, and hydroxyl radical scavenging tests. The in vitro anti-inflammatory capacity was estimated by studying the antidenaturation effect using bovine serum albumin (BSA) as a protein model. The in vivo anti-inflammatory activity was carried out by utilizing the classical model of carrageenan-induced paw edema in rats, using diclofenac (DCF) as the reference drug. Moreover, the molecular interaction of the compounds obtained from the GC-MS analysis was studied within the binding site of cyclooxygenase-2 (COX-2) using an in silico approach as the confirmatory tool of the in vitro and in vivo experiments. The GC-MS analysis revealed that MCEOs were mainly composed of oxygenated monoterpenes (70.56%), oxygenated sesquiterpenes (3.1%), sesquiterpenes (4.17%), and monoterpenes (8.75%). Furthermore, 1,8-cineole was the major compound (19.05%), followed by cis-geranyl acetate (11.74%), methyl eugenol (5.58%), α-terpineol (4.62%), and ß-myrcene (4.40%). MCEOs exhibited remarkable concentration-dependent free radical scavenging activity, with an IC50 of 15.317 ± 0.340 µg/mL, 18.890 ± 2.190 µg/mL, and 31.877 ± 0.742 µg/mL for DPPH, ABTS, and hydroxyl radical, respectively. The significant in vitro anti-inflammatory activity due to the inhibition of BSA denaturation was proportional to the EO concentration, where the highest value was recorded at 100 µg/mL with an approximately 63.35% percentage inhibition and an IC50 of 60.351 ± 5.832 µg/mL. MCEOs showed a good in vivo anti-inflammatory effect by limiting the development of carrageenan-induced paw thickness. The in silico study indicated that, among the 60 compounds identified by the GC-MS analysis, 9 compounds were observed to have a high binding energy to cyclooxygenase-2 as compared to diclofenac. Our study revealed that EOs from Algerian Myrtus communis L. can be considered to be a promising candidate for alleviating many debilitating health problems and may provide new insights in the fields of drug design, agriculture, and the food industry.

Modification of Dispersin B with Cyclodextrin-Ciprofloxacin Derivatives for Treating Staphylococcal.

To address the high tolerance of biofilms to antibiotics, it is urgent to develop new strategies to fight against these bacterial consortia. An innovative antibiofilm nanovector drug delivery system, consisting of Dispersin B-permethylated-ß-cyclodextrin/ciprofloxacin adamantyl (DspB-ß-CD/CIP-Ad), is described here. For this purpose, complexation assays between CIP-Ad and (i) unmodified ß-CD and (ii) different derivatives of ß-CD, which are 2,3-O-dimethyl-ß-CD, 2,6-O-dimethyl-ß-CD, and 2,3,6-O-trimethyl-ß-CD, were tested. A stoichiometry of 1/1 was obtained for the ß-CD/CIP-Ad complex by NMR analysis. Isothermal Titration Calorimetry (ITC) experiments were carried out to determine Ka, ΔH, and ΔS thermodynamic parameters of the complex between ß-CD and its different derivatives in the presence of CIP-Ad. A stoichiometry of 1/1 for ß-CD/CIP-Ad complexes was confirmed with variable affinity according to the type of methylation. A phase solubility study showed increased CIP-Ad solubility with CD concentration, pointing out complex formation. The evaluation of the antibacterial activity of CIP-Ad and the 2,3-O-dimethyl-ß-CD/CIP-Ad or 2,3,6-O-trimethyl-ß-CD/CIP-Ad complexes was performed on Staphylococcus epidermidis (S. epidermidis) strains. The Minimum Inhibitory Concentration (MIC) studies showed that the complex of CIP-Ad and 2,3-O-dimethyl-ß-CD exhibited a similar antimicrobial activity to CIP-Ad alone, while the interaction with 2,3,6-O-trimethyl-ß-CD increased MIC values. Antimicrobial assays on S. epidermidis biofilms demonstrated that the synergistic effect observed with the DspB/CIP association was partly maintained with the 2,3-O-dimethyl-ß-CDs/CIP-Ad complex. To obtain this "all-in-one" drug delivery system, able to destroy the biofilm matrix and release the antibiotic simultaneously, we covalently grafted DspB on three carboxylic permethylated CD derivatives with different-length spacer arms. The strategy was validated by demonstrating that a DspB-permethylated-ß-CD/ciprofloxacin-Ad system exhibited efficient antibiofilm activity.

Metal-Free ATRP Catalyzed by Visible Light in Continuous Flow.

ATRP of methyl methacrylate catalyzed by Eosin Y, an inexpensive and an environmental benign dye, was performed in a continuous flow reactor made of FEP tubing and irradiated by visible light green LEDs. The reaction under flow conditions was significantly more rapid and controlled compared to that in batch giving 90% of polymerization after only 3 h of irradiation. The formed polymers in flow have M n measured by GPC and DOSY NMR in accordance with the theoretical values and show low dispersities (Ð < 1.5). The livingness of the polymers has been confirmed by LED on and LED off experiments and by the synthesis of block copolymers. The protocol described herein serves as a "proof of concept" of using Eosin Y as a photocatalyst for controlled polymerization and of using 1D and 2D NMR for polymer characterization. The protocol could be replicated in the future for other reversible-deactivation radical polymerizations.

Degradable double hydrophilic block copolymers and tripartite polyionic complex micelles thereof for small interfering ribonucleic acids (siRNA) delivery.

Polymer vectors for gene therapy have been largely investigated as an alternative to viral vectors. In particular, double hydrophilic block copolymers (DHBCs) have shown potential in this domain, but to date studies mainly focus on non-degradable copolymers, which may be a restriction for further development. To overcome this limitation, we synthesized a DHBC (PEG43-b-PCL12(COOH)6.5) composed of a poly(ethylene glycol) (PEG) non-ionic and bioeliminable block and a degradable carboxylic acid-functionalized poly(ε-caprolactone) (PCL) block. The potential of this DHBC as an original vector for small interfering ribonucleic acids (siRNA) to formulate tripartite polyionic complex (PIC) micelles with poly(lysine) (PLL) was evaluated. We first studied the impact of the charge ratio (R) on the size and the zeta potential of the resulting micelles. With a charge ratio R = 1, one formulation with optimized physico-chemical properties showed the ability to complex 75% of siRNA. We showed a stability of the micelles at pH 7.4 and a disruption at pH 5, which allowed a pH-triggered siRNA release and proved the pH-stimuli responsive character of the tripartite micelles. In addition, the tripartite PIC micelles were shown to be non-cytotoxic below 40 µg/mL. The potential of these siRNA vectors was further evaluated in vitro: it was found that the tripartite PIC micelles allowed siRNA internalization to be 3 times higher than PLL polyplexes in murine mesenchymal stem cells, and were able to transfect human breast cancer cells. Overall, this set of data pre-validates the use of degradable DHBC as non-viral vectors for the encapsulation and the controlled release of siRNA, which may therefore constitute a sound alternative to non-degradable and/or cytotoxic polycationic vectors.

Double-Hydrophilic Block Copolymers Based on Functional Poly(ε-caprolactone)s for pH-Dependent Controlled Drug Delivery.

The use of double-hydrophilic block copolymers (DHBCs) in biomedical applications is limited by their lack of degradability. This additional functionality has been obtained in the past through multistep chemical strategies associated with low yields. In this work, a series of DHBCs composed of a bioeliminable poly(ethylene glycol) (PEG) block and hydrolyzable functional poly(ε-caprolactone) (PCL) blocks bearing carboxylic (PEG-b-PCL(COOH)), amino (PEG-b-PCL(NH2)), or hydroxyl side groups (PEG-b-PCL(OH)) is synthesized in only three steps. DHBCs with 50% substitution degree with respect to the CL units are obtained for all functional groups. The pH-dependent self-assembly behavior of the DHBCs is studied showing critical micelle concentration (CMC) variations by a factor of 2 upon pH changes and micellar mean diameter variations of 20-30%. The potential of these partly degradable DHBCs as drug-loaded polyion complex micelles is further exemplified with the PEG-b-PCL(COOH) series that is associated with the positively charged anticancer drug doxorubicin (DOX). Encapsulation efficiencies, drug loadings, pH-controlled release, and cytotoxicity of the DOX-loaded micelles toward cancer cells are demonstrated. This set of data confirms the interest of the proposed straightforward chemical strategy to generate fully bioeliminable and partly degradable DHBCs with potential as pH-responsive drug-delivery systems.

Formulation and evaluation of diclofenac controlled release matrix tablets made of HPMC and Poloxamer 188 polymer: An assessment on mechanism of drug release.

In this study, hydrophilic hydroxypropyl methylcellulose matrices with various concentrations of Poloxamer 188 were used in the development of oral controlled release tablets containing diclofenac sodium. Four formulations of hydrophilic matrix tablets containing 16.7% w/w HPMC and 0, 6.7, 16.7 and 25.0% w/w Poloxamer 188, respectively, were developed. Tablets were prepared by direct compression and characterized for diameter, hardness, thickness, weight and uniformity of content. The influence of various blends of hydroxypropyl methylcellulose and Poloxamer 188 on the in vitro dissolution profile and mechanism of drug release of was investigated. In the four formulations, the rate of drug release decreased with increasing the concentration of Poloxamer 188 at the initial dissolution stages due to the increase in the apparent viscosity of the gel diffusion layer. However, in the late dissolution stages, the rate of drug release increased with increasing Poloxamer 188 concentration due to the increase in wettability and dissolution of the matrix. The kinetic of drug release from the tablets followed non-Fickian mechanism, as predicted by Korsmeyer-Peppas model, which involves diffusion through the gel layer and erosion of the matrix system.

Stabilization of poly(ethylene glycol)-poly(ε-caprolactone) star block copolymer micelles via aromatic groups for improved drug delivery properties.

HYPOTHESIS: The functionalization of poly(ethylene glycol)-poly(ε-caprolactone) (PEG-PCL) block copolymers with moieties allowing for core-crosslinking is expected to result in improved micellar stability and drug delivery properties. EXPERIMENTS: PEG-(PCL)8 star block copolymers were functionalized with pendant benzylthioether (BTE) groups by applying an anionic post-polymerization modification technique followed by photoradical thiol-yne addition of benzyl mercaptan. The micellar properties of PEG-(PCL)8 and PEG-(PCL-BTE)8 were studied and compared in terms of critical micelle concentration (CMC), size, morphology, drug loading and release and in vitro cytotoxicity. FINDINGS: In comparison with unmodified PEG-(PCL)8 micelles, PEG-(PCL-BTE)8 micelles exhibited a 15-fold lower CMC, a 15-fold smaller size and a 50% higher drug loading and encapsulation efficiency thanks to the presence of pendant benzyl groups which provide the possibility for micellar core-crosslinking via supramolecular π-π stacking and additional hydrophobic interactions. Whereas the PEG-(PCL)8 micelles showed significant aggregation during in vitro cytotoxicity experiments, the PEG-(PCL-BTE)8 micelles showed no signs of aggregation and were capable of solubilizing high concentrations of curcumin, resulting in a significant decrease in MCF-7 cell viability after 48 h. Their ease of synthesis combined with promising results regarding drug delivery make the PEG-(PCL-BTE)8 micelles appealing for application in the field of encapsulation.

Iterative Photoinduced Chain Functionalization as a Generic Platform for Advanced Polymeric Drug Delivery Systems.

Advanced drug delivery systems (DDS) are easily designed following a photoiterative strategy. Multifunctional polymers are obtained by coupling building blocks of interest to an alkynated poly(ε-caprolactone) (PCL) platform via an efficient thiol-yne photoaddition. Fine-tuning over the design is achieved, as illustrated with targeting and enzyme-responsive DDS.