Ultrasmall and Highly Dispersed Pt Entities Deposited on Mesoporous N-doped Carbon Nanospheres by Pulsed CVD for Improved HER.

Vapor-based deposition techniques are emerging approaches for the design of carbon-supported metal powder electrocatalysts with tailored catalyst entities, sizes, and dispersions. Herein, a pulsed CVD (Pt-pCVD) approach is employed to deposit different Pt entities on mesoporous N-doped carbon (MPNC) nanospheres to design high-performance hydrogen evolution reaction (HER) electrocatalysts. The influence of consecutive precursor pulse number (50-250) and deposition temperature (225-300 °C) are investigated. The Pt-pCVD process results in highly dispersed ultrasmall Pt clusters (≈1 nm in size) and Pt single atoms, while under certain conditions few larger Pt nanoparticles are formed. The best MPNC-Pt-pCVD electrocatalyst prepared in this work (250 pulses, 250 °C) reveals a Pt HER mass activity of 22.2 ± 1.2 A mg-1 Pt at -50 mV versus the reversible hydrogen electrode (RHE), thereby outperforming a commercially available Pt/C electrocatalyst by 40% as a result of the increased Pt utilization. Remarkably, after optimization of the Pt electrode loading, an ultrahigh Pt mass activity of 56 ± 2 A mg-1 Pt at -50 mV versus RHE is found, which is among the highest Pt mass activities of Pt single atom and cluster-based electrocatalysts reported so far.

Ultrahigh Mass Activity Pt Entities Consisting of Pt Single atoms, Clusters, and Nanoparticles for Improved Hydrogen Evolution Reaction.

Platinum is one of the best-performing catalysts for the hydrogen evolution reaction (HER). However, high cost and scarcity severely hinder the large-scale application of Pt electrocatalysts. Constructing highly dispersed ultrasmall Platinum entities is thereby a very effective strategy to increase Pt utilization and mass activities, and reduce costs. Herein, highly dispersed Pt entities composed of a mixture of Pt single atoms, clusters, and nanoparticles are synthesized on mesoporous N-doped carbon nanospheres. The presence of Pt single atoms, clusters, and nanoparticles is demonstrated by combining among others aberration-corrected annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, and electrochemical CO stripping. The best catalyst exhibits excellent geometric and Pt HER mass activity, respectively ≈4 and 26 times higher than that of a commercial Pt/C reference and a Pt catalyst supported on nonporous N-doped carbon nanofibers with similar Pt loadings. Noteworthily, after optimization of the geometrical Pt electrode loading, the best catalyst exhibits ultrahigh Pt and catalyst mass activities (56 ± 3 A mg-1 Pt and 11.7 ± 0.6 A mg-1 Cat at -50 mV vs. reversible hydrogen electrode), which are respectively ≈1.5 and 58 times higher than the highest Pt and catalyst mass activities for Pt single-atom and cluster-based catalysts reported so far.

Mechanistic Understanding of Water Oxidation in the Presence of a Copper Complex by In Situ Electrochemical Liquid Transmission Electron Microscopy.

The design of molecular oxygen-evolution reaction (OER) catalysts requires fundamental mechanistic studies on their widely unknown mechanisms of action. To this end, copper complexes keep attracting interest as good catalysts for the OER, and metal complexes with TMC (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) stand out as active OER catalysts. A mononuclear copper complex, [Cu(TMC)(H2O)](NO3)2 (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), combined both key features and was previously reported to be one of the most active copper-complex-based catalysts for electrocatalytic OER in neutral aqueous solutions. However, the functionalities and mechanisms of the catalyst are still not fully understood and need to be clarified with advanced analytical studies to enable further informed molecular catalyst design on a larger scale. Herein, the role of nanosized Cu oxide particles, ions, or clusters in the electrochemical OER with a mononuclear copper(II) complex with TMC was investigated by operando methods, including in situ vis-spectroelectrochemistry, in situ electrochemical liquid transmission electron microscopy (EC-LTEM), and extended X-ray absorption fine structure (EXAFS) analysis. These combined experiments showed that Cu oxide-based nanoparticles, rather than a molecular structure, are formed at a significantly lower potential than required for OER and are candidates for being the true OER catalysts. Our results indicate that for the OER in the presence of a homogeneous metal complex-based (pre)catalyst, careful analyses and new in situ protocols for ruling out the participation of metal oxides or clusters are critical for catalyst development. This approach could be a roadmap for progress in the field of sustainable catalysis via informed molecular catalyst design. Our combined approach of in situ TEM monitoring and a wide range of complementary spectroscopic techniques will open up new perspectives to track the transformation pathways and true active species for a wide range of molecular catalysts.

Stabilization of different redox levels of a tridentate benzoxazole amidophenoxide ligand when bound to Co(iii) or V(v).

A tridentate benzoxazole-containing aminophenol ligand NNOH2 was coordinated to Co and V metal centers and the electronic structure of the resultant complexes characterized by both experimental and theoretical methods. The solid state structure of the Co complex exhibits a distorted octahedral geometry with two tridentate ligands bound in meridional fashion, and coordination-sphere bond lengths consistent with a Co(iii) oxidation state. EPR and magnetic data support a S = 1/2 ground state, and a formal electronic description of Co(iii)(NNOAP)(NNOISQ) where NNOAP corresponds to an amidophenoxide and NNOISQ to the iminosemiquinone redox level. However, the metrical parameters are similar for both ligands in the solid state, and DFT calculations support delocalization of the ligand radical over both ligands, affording an intermediate ligand redox level Co(iii)(NNO1.5-)(NNO1.5-). The vanadyl complex exhibits a distorted octahedral geometry in the solid state consistent with a V(v) metal center and amidophenoxide (NNOAP), acetylacetonate and oxo ligands. The ligand metrical parameters are consistent with significant amidophenoxide to V(v) π donation. Overall, our results highlight the roles of electron transfer, delocalization, and π bonding in the metal complexes under study, and thus the complexity in assignment of the electronic structure in these systems.

Bi2O2CO3 Growth at Room Temperature: In Situ X-ray Diffraction Monitoring and Thermal Behavior.

The room-temperature formation of bismuth oxycarbonate (Bi2O2CO3) from Bi2O3 in sodium carbonate buffer was investigated with in situ powder X-ray diffraction (PXRD) in combination with electron microscopy and vibrational spectroscopy. Time-resolved PXRD measurements indicate a pronounced and rather complex pH dependence of the reaction mechanism. Bi2O2CO3 formation proceeds within a narrow window between pH 8 and 10 via different mechanisms. Although a zero-dimensional nucleation model prevails around pH 8, higher pH values induce a change toward a diffusion-controlled model, followed by a transition to regular nucleation kinetics. Ex situ synthetic and spectroscopic studies confirm these trends and demonstrate that in situ monitoring affords vital parameter information for the controlled fabrication of Bi2O2CO3 materials. Furthermore, the ß â†’ α bismuth oxide transformation temperatures of Bi2O2CO3 precursors obtained from different synthetic routes differ notably (by min 50 °C) from commercially available bismuth oxide. Parameter studies suggest a stabilizing role of surface carbonate ions in the as-synthesized bismuth oxide sources. Our results reveal the crucial role of multiple preparative history parameters, especially of pH value and source materials, for the controlled access to bismuth oxide-based catalysts and related functional compounds.

Proposed mechanisms for water oxidation by Photosystem II and nanosized manganese oxides.

Plants, algae and cyanobacteria capture sunlight, extracting electrons from H2O to reduce CO2 into sugars while releasing O2 in the oxygenic photosynthetic process. Because of the important role of water oxidation in artificial photosynthesis and many solar fuel systems, understanding the structure and function of this unique biological catalyst forms a requisite research field. Herein the structure of the water-oxidizing complex and its ligand environment are described with reference to the 1.9Å resolution X-ray-derived crystallographic model of the water-oxidizing complex from the cyanobacterium Thermosynechococcus vulcanus. Proposed mechanisms for water oxidation by Photosystem II and nanosized manganese oxides are also reviewed and discussed in the paper.

Synthesis, characterization and catalytic activity of copper(II) complexes containing a redox-active benzoxazole iminosemiquinone ligand.

A tridentate benzoxazole-containing aminophenol ligand HL(BAP) was synthesized and complexed with Cu(II). The resulting Cu(II) complexes were characterized by X-ray, IR, UV-vis-NIR spectroscopies, and magnetic susceptibility studies, demonstrating that the ligand is oxidized to the o-iminosemiquinone form [L(BIS)](-) in the isolated complexes. L(BIS)Cu(II)Cl exhibits a distorted tetrahedral geometry, while L(BIS)Cu(II)OAc is square pyramidal. In both solid state structures the ligand is coordinated to Cu(II)via the benzoxazole, as well as the nitrogen and oxygen atoms from the o-iminosemiquinone moiety. The chloride, or acetate group occupies the fourth and/or fifth positions in L(BIS)Cu(II)Cl and L(BIS)Cu(II)OAc, respectively. Magnetic susceptibility measurements indicate that both complexes are diamagnetic due to antiferromagnetic coupling between the d(9) Cu(II) centre and iminosemiquinone ligand radical. Electrochemical studies of the complexes demonstrate both a quasi-reversible reduction and oxidation process for the Cu complexes. While L(BIS)Cu(II)X (X = Cl) is EPR-silent, chemical oxidation affords a species with an EPR signal consistent with ligand oxidation to form a d(9) Cu(II) iminoquinone species. In addition, chemical reduction results in a Cu(II) centre most likely bound to an amidophenoxide. Mild and efficient oxidation of alcohol substrates to the corresponding aldehydes was achieved with molecular oxygen as the oxidant and L(BIS)Cu(II)X-Cs2CO3 as the catalyst.