Remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX analysis: An in vitro study.

Aim: To evaluate the remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX in vitro testing methods. Materials and Methods: The pulp was freshly obtained from coconut and divided into two. Then, coconut milk was obtained by blending, while the next portion was freeze-dried and lyophilized. Third molar teeth were processed into tooth slabs (N = 40) and split equally into five groups by block randomization. After demineralization, one tooth slab was taken from each, and SEM analysis was done. Remineralization was then performed among the various groups that included Group 1, which acted as a control and consisted of the remineralization solution. Groups 2 and 3 comprised 1:1 and 2:1 concentrations of the coconut milk, whereas Groups 4 and 5 consisted of 1:1 and 2:1 concentrations of the lyophilized extract. SEM and EDAX testing were done post-remineralization. Ca and phosphate values were tabulated, and statistical significance was determined for the obtained values using ANOVA. Results: Among the control and treatment groups, surface remineralization was better observed in 1:1 coconut milk and 2:1 coconut milk than in the 2:1 lyophilized coconut, control, and 1:1 lyophilized coconut. Between the control and treatment groups, Ca and phosphate percentages (P < 0.001) showed statistical differences. The lowest value of 2.3% was noted in the 2:1 lyophilized coconut group. Conclusion: Coconut extracts exhibit remineralization potential on the artificial carious lesion. Coconut milk exhibited significant improvement in the surface properties than lyophilized coconut.

Enamel Remineralization Efficacy of Coconut Milk and Lyophilized Coconut Extract in Different Concentrations on Demineralized Enamel Surfaces: An In-Vitro Study.

Aim The current study's objective is to determine the remineralizing efficacy of freeze-dried lyophilized coconut extract and coconut milk made from freshly grated coconut on artificial carious lesions produced by pH cycling. Materials and methods Freshly extracted coconut pulp was split into two parts. The first half was blended to obtain coconut milk, and the second part was freeze-dried and lyophilized. Tooth slabs were prepared from extracted third molar teeth. After being demineralized for 72 hours, the tooth samples were remineralized by submerging them in the appropriate remineralizing solution, which is as follows: Group 1 received 25 mL of the Remineralization solution (the control); Group 2 received 2.5 g of coconut milk and 25 mL of the solution (1:1); and Group 3 received 5 g of coconut milk and 25 mL of the solution (2:1). 2.5 g of freeze-dried, lyophilized coconut extract was given to Group 4 along with 25 mL of remineralization solution (1:1), and 5 g of freeze-dried, lyophilized coconut extract was given to Group 5 along with 25 mL of remineralization solution (2:1). Microhardness and contact angle measurements were made. An Excel spreadsheet was filled up with values from after demineralization, and after remineralization. A statistical analysis was performed using SPSS 26.0 (IBM Corp., Armonk, NY). Using descriptive statistics, the pretreatment mean values for the microhardness and contact angle of the various groups were evaluated. Post-hoc Tukey tests were utilized to compare the analytic results of the various groups. Results Among the various concentrations of freshly extracted coconut milk, the contact angle in concentrations of 1:1 was 81.22 ± 1.62 deg, and that in concentrations of 2:1 was 88.01 ± 1.85 deg. Between the two concentrations of the lyophilized coconut extract group, the contact angle in 1:1 was 75.05 ± 2.29 deg, and in 2:1 was 71.37 ± 0.85 deg. In the coconut milk group, the value of microhardness was 261 ± 6.4 kg/cm2 at a lower concentration and 322 ± 3.9 kg/cm2 at a higher concentration. In the lyophilized coconut group, the lower concentration exhibited a microhardness of 211 ± 7.2 kg/cm2, whereas in the higher concentration, it was 324 ± 4.04 kg/cm2. Conclusion Of the various concentrations of coconut milk and lyophilized coconut used, coconut milk at a higher concentration exhibits the highest contact angle, and the latter at a higher concentration exhibits the lowest contact angle. In both groups, high concentrations of the material exhibited high microhardness values compared to lower concentrations of the same.

Comparative evaluation of bracket bond failure rates of a novel non-primer adhesive with a conventional primer-based orthodontic adhesive - a pilot study.

Background: Bonding is an important step in fixed orthodontic therapy and evaluation of bracket bond failures while using different bonding systems is required. The aim of the present study was to evaluate and compare bracket failure rates of a novel no primer adhesive with conventional primer-based orthodontic adhesives. Methods: This split mouth study was conducted among fifteen patients who underwent therapy with fixed orthodontic appliances using metal brackets. Total of 300 brackets were bonded and the bracket bond failure rates were assessed at the end of 3 months. The difference in bond failure rates between the two groups were assessed in different teeth. Descriptive statistics and chi-square test was performed. Results: Evaluation of bracket bond failure rates showed a higher incidence of bond failures in the group bonded with the primerless adhesive (6.3%) compared to conventional adhesive (2.3%) but there was no statistically significant difference (P>0.05). No intergroup difference was found in the bracket failure rates of individual teeth (P>0.05). Conclusion: Higher incidence of bond failures were noted with brackets bonded with primerless adhesive when compared to primer-based adhesive but no significant difference was noted over a period of 3 months. Mandibular canine and premolars had a higher bracket failure rate with no significant difference between the adhesives.

Dentoalveolar and Airway Changes Following En Masse Distal Movement of the Maxillary Dentition with Infrazygomatic Crest Anchorage: A Prospective Study.

Aims and Objectives: Mini screws placed buccal to the maxillary first or second molars in the infra zygomatic crest (IZC) region can be used as anchors for various types of tooth movement. En masse distal movement of the maxillary dentition with IZC anchorage is routinely practiced nowadays as more patients demand a non-extraction treatment and it should be evaluated. The goal of this study was to assess dentoalveolar and airway changes in individuals with class II malocclusion after en masse distal movement of the maxillary dentition utilizing infrazygomatic anchorage. Materials and Methods: This prospective study included patients who required en masse distal movement of the maxillary dentition. Following initial leveling and aligning, mini screws were placed in the IZC region, and the maxillary arch was distalized en-masse. Pre (T0) and post distalization (T1) lateral cephalograms were traced for dentoalveolar and airway changes. Statistical tests were done with SPSS software. Shapiro-Wilk test for normality and paired T test for comparison between before and after en masse distalization were done. Results: The changes in dental angular and linear measurements such as U1 to N-A, L1 to N-B and interincisal angle, U1 to N-A and U1 to point A distance, U1 to palatal plane, L1 to N-B, L1 to Apo line distance, U6 to PtV were statistically significant (P > 0.05). Linear parameters such as L1 to ApO line, upper airway, and lower airway were not statistically significant (<0.05). Conclusion: Class II div I malocclusions can be efficiently corrected without extractions using IZC anchorage by en masse distal movement of the maxillary dentition. Significant reduction in upper anterior inclination, intrusion of maxillary anterior teeth, and distal movement of the posterior teeth were noted. No changes in airway dimensions were noted.

Knowledge, attitude, and awareness toward orthodontic treatment among patients: A questionnaire survey.

The current study's objective is to learn more about how patients, depending on their gender, perceive, feel, and know about orthodontic therapy.There was a cross-sectional survey among 100 patients to evaluate their knowledge and attitude toward orthodontic treatment. The questionnaire was prepared and circulated among patients using online google forms. The online responses were collected and tabulation of the data was done in excel sheets. Data was analysed using statistical software. Chi square test to compare the association of gender and patients knowledge regarding orthodontic treatment. In the current study 53% of the study population had visited an orthodontist. 79.6% of the patients are conscious that their teeth can be aligned properly by an orthodontist. 73.5% think that teeth should be properly positioned for a better facial appearance. According to the findings in the present study, it is evident that there is awareness and understanding regarding the orthodontic treatment among patients.

Knowledge, attitude, and awareness regarding the use of composites for orthodontic purposes among dental students.

The aim of the study was to determine the knowledge, attitude, and practice regarding the use of composites for orthodontic purposes among dental students. The questionnaire was designed to evaluate knowledge, attitude, and awareness. Google Forms was used for the distribution of questions. This is a questionnaire survey based on knowledge, attitude, and awareness regarding the use of composites for orthodontic purposes among dental students; 86% of them had awareness regarding the use of composites for orthodontic purposes, wherein the remaining 14% were not aware. Considering the limitations of the study groups, we can conclude that the knowledge, attitude, and awareness regarding the use of composites for orthodontic purposes among dental students were good. However, there is still a lack of knowledge in few perspectives which can be overcome with continuous dental education programs and lectures.

Prevalence of usage of various removable appliances among undergraduate dental students in a private dental college.

The aim of the present study was to assess the prevalence of usage of various removable appliances among undergraduate dental students in private dental colleges. Ethical approval for the study was obtained from the Institutional Review Board of Saveetha Institute of Medical and Technical Sciences, Chennai, India. A dental record of patients was investigated. Data evaluation was completed and entered into Microsoft Excel. Gender distribution among the cohorts was assessed. The most commonly used appliance is Hawley's appliance (61), followed by Essix retainer (25), Begg's wrap-around retainer (23), Hawley's appliance with tongue crib (16), cantilever spring (7), splint (7), and T spring (1), respectively. The majority of the females (36) took Hawley's appliance. The difference was not statistically significant between both the arches and between the male and female population. Hawley's appliance is the most commonly used removable appliance among dental graduates.

Knowledge, attitude, and awareness on the protocols and trends in orthodontic retention among dental students.

This survey aimed at evaluating the knowledge and awareness regarding the various retention protocols used in orthodontic practice. A survey has been conducted among the dental students by circulating 15 close-ended questions online to analyze the data collected on the protocols and trends in orthodontic retention. The male and female distribution among the study population was evaluated, and the retention protocols used were computed; statistical analysis was performed using SPSS software. Ninety-four percent accepted that Hawley retainers are predominantly used compared to fixed retainers. Eighty-seven percent agreed that they aim at a more stable dentition by the completion of orthodontic treatment. The Chi-square test on the knowledge of respondents on the permanent retention to be followed after orthodontic treatment to close generalized spacing is statistically not significant, P = 0.056. Within the considered limitations, it is clear that there is awareness among the dentists regarding the use of a retention appliance to ensure stability at the finish of orthodontic treatment. But the protocol for the same remains variable. Further studies can be performed to identify the effectiveness of each of the different retention protocols and their indications in various cases.

Awareness on three-dimensional printing of orthodontic appliances among dental students.

The aim of the study was to evaluate the knowledge and awareness regarding the use of three-dimensional (3D)-printed appliances used in orthodontics among students pursuing dentistry. The distribution of the questionnaire was done using an online Google Forms link to about 100 dental students. The questionnaire compromised questions that were designed for assessing the various findings and knowledge of update, and finally, questions related to facts on various 3D-printing appliances. Among the total population, 58% of the population are aware of 3D printing used for various dental applications, whereas 42% of the population are not aware of the same. Among the total population, 58% of the population are aware of 3D printing used in dentistry, whereas 42% of the population are not aware of 3D printing used in dentistry. Inside the limits of the review, it very well may be inferred that 3D-printed machines have a rising use in the majority of the dental fields and understudies chasing after dentistry know about it. The knowledge about the basic and fundamental working and the usage of such appliances is developing among undergraduate students. Further continuing education programs can be provided to improve the same.

Knowledge, attitude, and awareness of biocompatibility of orthodontic materials among dental students.

The aim of this study is to find the knowledge, attitude and awareness of biocompatibility of orthodontic materials among dental students.A survey of 13 questions was created using Google Forms. The questions on the survey cover a wide range of topics including the awareness of cytotoxicity of orthodontic materials, their corrosive potential, ways of preventing corrosion and release of subsequent substances, and various means by which these physiological actions occur. This survey was circulated among dental undergraduate students and the responses recorded were then transferred to SPSS software. Here we conducted descriptive analysis to produce a pie chart and Chi square test to determine the association and statistical significance.The results were noted and examined in the form of bar graphs. The p value for this study was found to be 0.01, which makes this study statistically significant. The awareness about the biocompatibility of orthodontic materials among dental students was found to be low. Continuing dental education programs can be conducted to constantly improve the knowledge regarding the judicious and ecofriendly use of all newly available dental materials.

Awareness and practice pertaining to the use of digital imaging for orthodontic purposes among undergraduate dental students.

The current study aimed at evaluation of the awareness of undergraduate dental students regarding the use of digital imaging that are used for orthodontic diagnosis and treatment. An online survey using google forms was conducted among the undergraduate dental students as a part of this study setting. The sample size of participants was 109. The survey was composed of a set of 14 questions including demographics. Ethical clearance was obtained from the Institutionalized ethical committee. SPSS software was used for data analysis and descriptive statistics. Among the entire population, 46.2% participants said that they would be using digital dental imaging during their practices and in their career and the remaining 53.8% participants said that they would not be using digital imaging due to various reasons. This study found out that undergraduate dental students have an average level of awareness regarding the use of digital dental imaging that are used for orthodontic diagnosis and treatment.

Correlation between chronological age and skeletal age using cvmi and modified MP3 methods.

Chronological age conveys only a rough approximation of the maturational status of a person whereas skeletal maturity indicators give a more accurate estimation. Therefore, it is of interest to document the correlation between chronological and skeletal age using CVMI and modified MP3 methods. A total of 39 subjects between the age ranges of 9-16 years were selected for this study. Pre-treatment lateral cephalograms and hand-wrist radiographs of the subjects were used. The skeletal age was analyzed by the Cervical Vertebrae Maturity Index (CVMI) and modified MP3 methods. The data was analyzed with SPSS software version 23.00. Kendall's Tau correlation test was performed to estimate the correlation between chronological age and skeletal age among the subjects and a linear regression test was also performed. Positive correlation was found between chronological age and skeletal age assessed by CVMI method (r= 0.398) and modified MP3 method (r=0.382) with p value >0.003. Thus it can be concluded that there was a positive correlation between chronological age and skeletal age among all the subjects.