The evolution of solvation symmetry and composition in Zn halide aqueous solutions from dilute to extreme concentrations.

The emergence of cation-anion species, or contact ion pairs, is fundamental to understanding the physical properties of aqueous solutions when moving from the ideal, low-concentration limit to the manifestly non-ideal limits of very high solute concentration or constituent ion activity. We focus here on Zn halide solutions both as a model system and also as an exemplar of the applications spanning from (i) electrical energy storage via the paradigm of water in salt electrolyte (WiSE) to (ii) the physical chemistry of brines in geochemistry to (iii) the long-standing problem of nucleation. Using a combination of experimental and theoretical approaches we quantify the halide coordination number and changing coordination geometry without embedded use of theoretical equilibrium constants. These results and the associated methods, notably including the use of valence-to-core X-ray emission spectroscopy, provide new insights into the Zn halide system and new research directions in the physical chemistry of concentrated electrolytes.

Na3 Zr2 Si2 PO12 Solid Electrolyte Membrane for High-Performance Seawater Battery.

Seawater batteries (SWBs) have gained tremendous interest in the electrochemical energy storage research field because of their low cost, natural abundance, and potential use for long-duration energy storage. Advancing a SWB to demonstration projects is plagued by the poor electrochemical performance stemming from the poor interfaces of the solid electrolyte (SE), as well as the structural and chemical instabilities and sluggish ionic transport properties. In this study, the anode compartment of a surrogate SWB is constructed with a Na | SE | hard carbon configuration, and tailored dopants are introduced into the Nasicon-type Na3 Zr2 Si2 PO12 (NZSP) SE membrane. After doping with TiO2 , a much more densely packed pellet with uniformly distributed porous structure is obtained. Changes in surface chemistry and local structure in the bulk are observed, which are believed to contribute to the improved ionic conductivity and higher critical current density of the TiO2 -doped NZSP. Stable cycling performance with reversible capacities based on different Na storage mechanisms are also demonstrated.

Inhibiting collective cation migration in Li-rich cathode materials as a strategy to mitigate voltage hysteresis.

Lithium-rich cathodes are promising energy storage materials due to their high energy densities. However, voltage hysteresis, which is generally associated with transition metal migration, limits their energy efficiency and implementation in practical devices. Here we reveal that voltage hysteresis is related to the collective migration of metal ions, and that isolating the migration events from each other by creating partial disorder can create high-capacity reversible cathode materials, even when migrating transition metal ions are present. We demonstrate this on a layered Li-rich chromium manganese oxide that in its fully ordered state displays a substantial voltage hysteresis (>2.5 V) associated with collective transition metal migration into Li layers, but can be made to achieve high capacity (>360 mAh g-1) and energy density (>1,100 Wh kg-1) when the collective migration is perturbed by partial disorder. This study demonstrates that partially cation-disordered cathode materials can accommodate a high level of transition metal migration, which broadens our options for redox couples to those of mobile cations.

Water Defect Stabilizes the Bi3+ Lone-Pair Electronic State Leading to an Unusual Aqueous Hydration Structure.

The aqueous hydration structure of the Bi3+ ion is probed using a combination of extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) simulations of ion-water clusters and condensed-phase solutions. Anomalous features in the EXAFS spectra are found to be associated with a highly asymmetric first-solvent water shell. The aqueous chemistry and structure of the Bi3+ ion are dramatically controlled by the water stabilization of a lone-pair electronic state involving the mixed 6s and 6p orbitals. This leads to a distinct multimodal distribution of water molecules in the first shell that are separated by about 0.2 Å. The lone-pair structure is stabilized by a collective response of multiple waters that are localized near the lone-pair anti-bonding site. The findings indicate that the lone-pair stereochemistry of aqueous Bi3+ ions plays a major role in the binding of water and ligands in aqueous solutions.

Differences in the Interfacial Mechanical Properties of Thiophosphate and Argyrodite Solid Electrolytes and Their Composites.

Interfacial mechanics are a significant contributor to the performance and degradation of solid-state batteries. Spatially resolved measurements of interfacial properties are extremely important to effectively model and understand the electrochemical behavior. Herein, we report the interfacial properties of thiophosphate (Li3PS4)- and argyrodite (Li6PS5Cl)-type solid electrolytes. Using atomic force microscopy, we showcase the differences in the surface morphology as well as adhesion of these materials. We also investigate solvent-less processing of hybrid electrolytes using UV-assisted curing. Physical, chemical, and structural characterizations of the materials highlight the differences in the surface morphology, chemical makeup, and distribution of the inorganic phases between the argyrodite and thiophosphate solid electrolytes.

Fast-charging aluminium-chalcogen batteries resistant to dendritic shorting.

Although batteries fitted with a metal negative electrode are attractive for their higher energy density and lower complexity, the latter making them more easily recyclable, the threat of cell shorting by dendrites has stalled deployment of the technology1,2. Here we disclose a bidirectional, rapidly charging aluminium-chalcogen battery operating with a molten-salt electrolyte composed of NaCl-KCl-AlCl3. Formulated with high levels of AlCl3, these chloroaluminate melts contain catenated AlnCl3n+1- species, for example, Al2Cl7-, Al3Cl10- and Al4Cl13-, which with their Al-Cl-Al linkages confer facile Al3+ desolvation kinetics resulting in high faradaic exchange currents, to form the foundation for high-rate charging of the battery. This chemistry is distinguished from other aluminium batteries in the choice of a positive elemental-chalcogen electrode as opposed to various low-capacity compound formulations3-6, and in the choice of a molten-salt electrolyte as opposed to room-temperature ionic liquids that induce high polarization7-12. We show that the multi-step conversion pathway between aluminium and chalcogen allows rapid charging at up to 200C, and the battery endures hundreds of cycles at very high charging rates without aluminium dendrite formation. Importantly for scalability, the cell-level cost of the aluminium-sulfur battery is projected to be less than one-sixth that of current lithium-ion technologies. Composed of earth-abundant elements that can be ethically sourced and operated at moderately elevated temperatures just above the boiling point of water, this chemistry has all the requisites of a low-cost, rechargeable, fire-resistant, recyclable battery.

Near-Quantitative Predictions of the First-Shell Coordination Structure of Hydrated First-Row Transition Metal Ions Using K-Edge X-ray Absorption Near-Edge Spectroscopy.

The solvation structure of transition metal ions is important for applications in geochemistry, biochemistry, energy storage, and environmental chemistry. We study the X-ray absorption pre-edge and near-edge spectra at the K-edge of a nearly complete series of hydrated first-row transition metal ions with d orbital occupancy from d2 to d10. We optimize all of the structures at the density functional theory (DFT) level with explicit solvation and then compute the pre-edge X-ray absorption spectra with time-dependent DFT (TDDFT) and restricted active space second-order perturbation theory (RASPT2). TDDFT provides accurate results for spectra that are dominated by single excitations, while RASPT2 correctly distinguishes between singly and doubly excited states with quantitative accuracy compared with experiment. We analyze the pre-edge features for each metal ion to reveal the impact of the variations in d orbital occupancy on the first-shell coordination environment. We also report the lowest-energy ligand field d-d transitions using complete active space second-order perturbation theory.

Concentration-dependent ion correlations impact the electrochemical behavior of calcium battery electrolytes.

Ion interactions strongly determine the solvation environments of multivalent electrolytes even at concentrations below that required for practical battery-based energy storage. This statement is particularly true of electrolytes utilizing ethereal solvents due to their low dielectric constants. These solvents are among the most commonly used for multivalent batteries based on reactive metals (Mg, Ca) due to their reductive stability. Recent developments in multivalent electrolyte design have produced a variety of new salts for Mg2+ and Ca2+ that test the limits of weak coordination strength and oxidative stability. Such electrolytes have great potential for enabling full-cell cycling of batteries based on these working ions. However, the ion interactions in these electrolytes exhibit significant and non-intuitive concentration relationships. In this work, we investigate a promising exemplar, calcium tetrakis(hexafluoroisopropoxy)borate (Ca(BHFIP)2), in the ethereal solvents 1,2-dimethoxyethane (DME) and tetrahydrofuran (THF) across a concentration range of several orders of magnitude. Surprisingly, we find that effective salt dissociation is lower at relatively dilute concentrations (e.g. 0.01 M) than at higher concentrations (e.g. 0.2 M). Combined experimental and computational dielectric and X-ray spectroscopic analyses of the changes occurring in the Ca2+ solvation environment across these concentration regimes reveals a progressive transition from well-defined solvent-separated ion pairs to de-correlated free ions. This transition in ion correlation results in improvements in both conductivity and calcium cycling stability with increased salt concentration. Comparison with previous findings involving more strongly associating salts highlights the generality of this phenomenon, leading to important insight into controlling ion interactions in ether-based multivalent battery electrolytes.

Ionic Contraction across the Lanthanide Series Decreases the Temperature-Induced Disorder of the Water Coordination Sphere.

In liquid, temperature affects the structures of lanthanide complexes in multiple ways that depend upon complex interactions between ligands, anions, and solvent molecules. The relative simplicity of lanthanide aqua ions (Ln3+) make them well suited to determine how temperature induces structural changes in lanthanide complexes. We performed a combination of ab initio molecular dynamics (AIMD) simulations and extended X-ray absorption fine structure (EXAFS) measurements, both at 25 and 90 °C, to determine how temperature affects the first- and second-coordination spheres of three Ln3+ (Ce3+, Sm3+, and Lu3+) aqua ions. AIMD simulations show first lanthanide coordination spheres that are similar at 25 and 90 °C, more so for the Lu3+ ion that remains as eight-coordinate than for the Ce3+ and Sm3+ ions that change their preferred coordination number from nine (at 25 °C) to eight (at 90 °C). The measured EXAFS spectra are very similar at 25 and 90 °C, for the Ce3+, Sm3+, and Lu3+ ions, suggesting that the dynamical disorder of the Ln3+ ions in liquid water is sufficient such that temperature-induced changes do not clearly manifest changes in the structure of the three ions. Both AIMD simulations and EXAFS measurements show very similar structures of the first coordination sphere of the Lu3+ ion at 25 and 90 °C.

Unveiling the Cerium(III)/(IV) Structures and Charge-Transfer Mechanism in Sulfuric Acid.

The Ce3+/Ce4+ redox couple has a charge transfer (CT) with extreme asymmetry and a large shift in redox potential depending on electrolyte composition. The redox potential shift and CT behavior are difficult to understand because neither the cerium structures nor the CT mechanism are well understood, limiting efforts to improve the Ce3+/Ce4+ redox kinetics in applications such as energy storage. Herein, we identify the Ce3+ and Ce4+ structures and CT mechanism in sulfuric acid via extended X-ray absorption fine structure spectroscopy (EXAFS), kinetic measurements, and density functional theory (DFT) calculations. We show EXAFS evidence that confirms that Ce3+ is coordinated by nine water molecules and suggests that Ce4+ is complexed by water and three bisulfates in sulfuric acid. Despite the change in complexation within the first coordination shell between Ce3+ and Ce4+, we show that the kinetics are independent of the electrode, suggesting outer-sphere electron-transfer behavior. We identify a two-step mechanism where Ce4+ exchanges the bisulfate anions with water in a chemical step followed by a rate-determining electron transfer step that follows Marcus theory (MT). This mechanism is consistent with all experimentally observed structural and kinetic data. The asymmetry of the Ce3+/Ce4+ CT and the observed shift in the redox potential with acid is explained by the addition of the chemical step in the CT mechanism. The fitted parameters from this rate law qualitatively agree with DFT-predicted free energies and the reorganization energy. The combination of a two-step mechanism with MT should be considered for other metal ion CT reactions whose kinetics have not been appropriately described.

Mixed Cationic and Anionic Redox in Ni and Co Free Chalcogen-Based Cathode Chemistry for Li-Ion Batteries.

Mixed cationic and anionic redox cathode chemistry is emerging as the conventional cationic redox centers of transition-metal-based layered oxides are reaching their theoretical capacity limit. However, these anionic redox reactions in transition metal oxide-based cathodes attained by taking excess lithium ions have resulted in stability issues due to weak metal-oxygen ligand covalency. Here, we present an alternative approach of improving metal-ligand covalency by introducing a less electronegative chalcogen ligand (sulfur) in the cathode structural framework where the metal d band penetrates into the ligand p band, thereby utilizing reversible mixed anionic and cationic redox chemistry. Through this design strategy, we report the possibility of developing a new family of layered cathode materials when partially filled d orbital redox couples like Fe2+/3+ are introduced in the Li-ion conducting phase (Li2SnS3). Further, the electron energy loss spectroscopy and X-ray absorption near-edge structure analyses are used to qualitatively identify the charge contributors at the metal and ligand sites during Li+ extraction. The detailed high-resolution transmission electron microscopy and high annular dark field-scanning transmission electron microscopy investigations reveal the multi-redox induced structural modifications and its surface amorphization with nanopore formation during cycling. Findings from this study will shed light on designing Ni and Co free chalcogen cathodes and various functional materials in the chalcogen-based dual anionic and cationic redox cathode avenue.

New Compounds and Phase Selection of Nickel Sulfides via Oxidation State Control in Molten Hydroxides.

Molten salts are promising reaction media candidates for the discovery of novel materials; however, they offer little control over oxidation state compared to aqueous solutions. Here, we demonstrated that when two hydroxides are mixed, their melts become fluxes with tunable solubility, which are surprisingly powerful solvents for ternary chalcogenides and offer effective paths for crystal growth to new compounds. We report that precise control of the oxidation state of Ni is achievable in mixed molten LiOH/KOH to grow single crystals of all known ternary K-Ni-S compounds. It is also possible to access several new phases, including a new polytope of ß-K2Ni3S4, as well as low-valence KNi4S2 and K4Ni9S11. KNi4S2 is a two-dimensional low-valence nickel-rich sulfide, and ß-K2Ni3S4 has a hexagonal lattice. Moreover, using KNi4S2 as a template, we obtained a new layered binary Ni2S by topotactic deintercalation of K. The new binary Ni2S has a van der Waals gap and can function as a new host layer for intercalation chemistry, as demonstrated by the intercalation of LiOH between its layers. The oxidation states of low-valence KNi4S2 and Ni2S were studied using X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. Density functional theory calculations showed large antibonding interactions at the Fermi level for both KNi4S2 and Ni2S, corresponding to the flat-bands with large Ni-dx2-y2 character.

High-Resolution In-Situ Synchrotron X-Ray Studies of Inorganic Perovskite CsPbBr3 : New Symmetry Assignments and Structural Phase Transitions.

Perovskite photovoltaic ABX3 systems are being studied due to their high energy-conversion efficiencies with current emphasis placed on pure inorganic systems. In this work, synchrotron single-crystal diffraction measurements combined with second harmonic generation measurements reveal the absence of inversion symmetry below room temperature in CsPbBr3 . Local structural analysis by pair distribution function and X-ray absorption fine structure methods are performed to ascertain the local ordering, atomic pair correlations, and phase evolution in a broad range of temperatures. The currently accepted space group assignments for CsPbBr3 are found to be incorrect in a manner that profoundly impacts physical properties. New assignments are obtained for the bulk structure: I m 3 ¯ (above ≈410 K), P21 /m (between ≈300 K and ≈410 K), and the polar group Pm (below ≈300 K), respectively. The newly observed structural distortions exist in the bulk structure consistent with the expectation of previous photoluminescence and Raman measurements. High-pressure measurements reveal multiple low-pressure phases, one of which exists as a metastable phase at ambient pressure. This work should help guide research in the perovskite photovoltaic community to better control the structure under operational conditions and further improve transport and optical properties.

Environment of Metal-O-Fe Bonds Enabling High Activity in CO2 Reduction on Single Metal Atoms and on Supported Nanoparticles.

Single-atom catalysts are often reported to have catalytic properties that surpass those of nanoparticles, while a direct comparison of sites common and different for both is lacking. Here we show that single atoms of Pt-group metals embedded into the surface of Fe3O4 have a greatly enhanced interaction strength with CO2 compared with the Fe3O4 surface. The strong CO2 adsorption on single Rh atoms and corresponding low activation energies lead to 2 orders of magnitude higher conversion rates of CO2 compared to Rh nanoparticles. This high activity of single atoms stems from the partially oxidic state imposed by their coordination to the support. Fe3O4-supported Rh nanoparticles follow the behavior of single atoms for CO2 interaction and reduction, which is attributed to the dominating role of partially oxidic sites at the Fe3O4-Rh interface. Thus, we show a likely common catalytic chemistry for two kinds of materials thought to be different, and we show that single atoms of Pt-group metals on Fe3O4 are especially successful materials for catalyzed reactions that depend primarily upon sites with the metal-O-Fe environment.

Coordination Sphere of Lanthanide Aqua Ions Resolved with Ab Initio Molecular Dynamics and X-ray Absorption Spectroscopy.

To resolve the fleeting structures of lanthanide Ln3+ aqua ions in solution, we (i) performed the first ab initio molecular dynamics (AIMD) simulations of the entire series of Ln3+ aqua ions in explicit water solvent using pseudopotentials and basis sets recently optimized for lanthanides and (ii) measured the symmetry of the hydrating waters about Ln3+ ions (Nd3+, Dy3+, Er3+, Lu3+) for the first time with extended X-ray absorption fine structure (EXAFS). EXAFS spectra were measured experimentally and generated from AIMD trajectories to directly compare simulation, which concurrently considers the electronic structure and the atomic dynamics in solution, with experiment. We performed a comprehensive evaluation of EXAFS multiple-scattering analysis (up to 6.5 Å) to measure Ln-O distances and angular correlations (i.e., symmetry) and elucidate the molecular geometry of the first hydration shell. This evaluation, in combination with symmetry-dependent L3- and L1-edge spectral analysis, shows that the AIMD simulations remarkably reproduces the experimental EXAFS data. The error in the predicted Ln-O distances is less than 0.07 Å for the later lanthanides, while we observed excellent agreement with predicted distances within experimental uncertainty for the early lanthanides. Our analysis revealed a dynamic, symmetrically disordered first coordination shell, which does not conform to a single molecular geometry for most lanthanides. This work sheds critical light on the highly elusive coordination geometry of the Ln3+ aqua ions.

Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries.

High-entropy (HE) ceramics, by analogy with HE metallic alloys, are an emerging class of solid solutions composed of a large number of species. These materials offer the benefit of large compositional flexibility and can be used in a wide variety of applications, including thermoelectrics, catalysts, superionic conductors and battery electrodes. We show here that the HE concept can lead to very substantial improvements in performance in battery cathodes. Among lithium-ion cathodes, cation-disordered rocksalt (DRX)-type materials are an ideal platform within which to design HE materials because of their demonstrated chemical flexibility. By comparing a group of DRX cathodes containing two, four or six transition metal (TM) species, we show that short-range order systematically decreases, whereas energy density and rate capability systematically increase, as more TM cation species are mixed together, despite the total metal content remaining fixed. A DRX cathode with six TM species achieves 307 mAh g-1 (955 Wh kg-1) at a low rate (20 mA g-1), and retains more than 170 mAh g-1 when cycling at a high rate of 2,000 mA g-1. To facilitate further design in this HE DRX space, we also present a compatibility analysis of 23 different TM ions, and successfully synthesize a phase-pure HE DRX compound containing 12 TM species as a proof of concept.

Structures and Free Energies of Cerium Ions in Acidic Electrolytes.

The Ce3+/Ce4+ redox potential changes with the electrolyte, which could be due to unequal anion complexation free energies between Ce3+ and Ce4+ or a change in the solvent electrostatic screening. Ce complexation with anions and solvent screening also affect the solubility of Ce and charge transfer kinetics for electrochemical reactions involving waste remediation and energy storage. We report the structures and free energies of cerium complexes in seven acidic electrolytes based on Extended X-ray Absorption Fine Structure, UV-vis, and Density Functional Theory calculations. Ce3+ coordinates with nine water molecules as [Ce(H2O)9]3+ in all studied electrolytes. However, Ce4+ complexes with anions in all electrolytes except HClO4. Thus, our results suggest that Ce4+-anion complexation leads to the large shifts in standard redox potential. Long range screening effects are smaller than the anion complexation energies but could be responsible for changes in the Ce solubility with acid.

X-ray Raman scattering for bulk chemical and structural insight into green carbon.

X-ray Raman scattering (XRS) spectroscopy is an emerging inelastic scattering technique which uses hard X-rays to study the X-ray absorption edges of low-Z elements (e.g. C, N, O) in bulk. This study applies XRS spectroscopy to pyrolysis and hydrothermal carbons. These materials are thermochemically-produced carbon from renewable resources and represent a route for the sustainable production of carbon materials for many applications. Results confirm local structural differences between biomass-derived (Oak, Quercus Ilex) pyrolysis and hydrothermal carbon. In comparison with NEXAFS, XRS spectroscopy has been shown to be more resilient to experimental artefacts such as self-absorption. Density functional theory XRS calculations of potential structural sub-units confirm that hydrothermal carbon is a highly disordered carbon material formed principally of furan units linked by the α carbon atoms. Comparison of two pyrolysis temperatures (450 °C and 650 °C) shows the development of an increasingly condensed carbon structure. Based on our results, we have proposed a semi-quantitative route to pyrolysis condensation.

Hybrid Sorbents for 129I Capture from Contaminated Groundwater.

Radioiodine (129I) poses a risk to the environment due to its long half-life, toxicity, and mobility. It is found at the U.S. Department of Energy Hanford Site due to legacy releases of nuclear wastes to the subsurface where 129I is predominantly present as iodate (IO3-). To date, a cost-effective and scalable cleanup technology for 129I has not been identified, with hydraulic containment implemented as the remedial approach. Here, novel high-performing sorbents for 129I remediation with the capacity to reduce 129I concentrations to or below the US Environmental Protection Agency (EPA) drinking water standard and procedures to deploy them in an ex-situ pump and treat (P&T) system are introduced. This includes implementation of hybridized polyacrylonitrile (PAN) beads for ex-situ remediation of IO3--contaminated groundwater for the first time. Iron (Fe) oxyhydroxide and bismuth (Bi) oxyhydroxide sorbents were deployed on silica substrates or encapsulated in porous PAN beads. In addition, Fe-, cerium (Ce)-, and Bi-oxyhydroxides were encapsulated with anion-exchange resins. The PAN-bismuth oxyhydroxide and PAN-ferrihydrite composites along with Fe- and Ce-based hybrid anion-exchange resins performed well in batch sorption experiments with distribution coefficients for IO3- of >1000 mL/g and rapid removal kinetics. Of the tested materials, the Ce-based hybrid anion-exchange resin was the most efficient for removal of IO3- from Hanford groundwater in a column system, with 50% breakthrough occurring at 324 pore volumes. The functional amine groups on the parent resin and amount of active sorbent in the resin can be customized to improve the iodine loading capacity. These results highlight the potential for IO3- remediation by hybrid sorbents and represent a benchmark for the implementation of commercially available materials to meet EPA standards for cleanup of 129I in a large-scale P&T system.

Evaluation of materials for iodine and technetium immobilization through sorption and redox-driven processes.

Radioactive iodine-129 (129I) and technetium-99 (99Tc) pose a risk to groundwater due to their long half-lives, toxicity, and high environmental mobility. Based on literature reviewed in Moore et al. (2019) and Pearce et al. (2019), natural and engineered materials, including iron oxides, low-solubility sulfides, tin-based materials, bismuth-based materials, organoclays, and metal organic frameworks, were tested for potential use as a deployed technology for the treatment of 129I and 99Tc to reduce environmental mobility. Materials were evaluated with metrics including capacity for IO3- and TcO4- uptake, selectivity and long-term immobilization potential. Batch testing was used to determine IO3- and TcO4- sorption under aerobic conditions for each material in synthetic groundwater at different solution to solid ratios. Material association with IO3- and TcO4- was spatially resolved using scanning electron microscopy and X-ray microprobe mapping. The potential for redox reactions was assessed using X-ray absorption near edge structure spectroscopy. Of the materials tested, bismuth oxy(hydroxide) and ferrihydrite performed the best for IO3-. The commercial Purolite A530E anion-exchange resin outperformed all materials in its sorption capacity for TcO4-. Tin-based materials had high capacity for TcO4-, but immobilized TcO4- via reductive precipitation. Bismuth-based materials had high capacity for TcO4-, though slightly lower than the tin-based materials, but did not immobilize TcO4- by a redox-drive process, mitigating potential negative re-oxidation effects over longer time periods under oxic conditions. Cationic metal organic frameworks and polymer networks had high Tc removal capacity, with TcO4- trapped within the framework of the sorbent material. Although organoclays did not have the highest capacity for IO3- and TcO4- removal in batch experiments, they are available commercially in large quantities, are relatively low cost and have low environmental impact, so were investigated in column experiments, demonstrating scale-up and removal of IO3- and TcO4- via sorption, and reductive immobilization with iron- and sulfur-based species.