Additives influence 3D printer emission profiles: Implications for working safely with polymer filament composites.

It is critical to thoroughly investigate, characterize, and understand the unique emission profiles of common and novel polymer feedstocks used in fused filament fabrication (FFF) 3D printers as these products become increasingly ubiquitous in consumer and industrial environments. This work contributes unique insights regarding the effects of polymer composite feedstocks with metal, ceramic, or carbonaceous particle additives on particulate emissions in a variety of filaments under various print conditions, including print temperature. In addition to active characterization of particulate size and concentration following the ANSI/CAN/UL 2904 method, particulate sampling and subsequent analysis by scanning electron microscopy revealed agglomeration behavior that may have important health implications. Specifically, fine particles (0.3-2.5 µm) generated by certain filaments including acrylonitrile butadiene styrene (ABS) and glycol-modified poly(ethylene terephthalate) (PETG) are shown to be formed via agglomeration of emitted ultrafine particles rather than composed of coherent primary particles; accordingly, transport and behavior of these particulates after inhalation may not follow expected patterns for micrometer-sized particles. Structures resembling carbonaceous additives (e.g., graphene and nanotubes) were also captured by airborne sampling during printing of filaments containing carbonaceous advanced materials.

Prevention through design: insights from computational fluid dynamics modeling to predict exposure to ultrafine particles from 3D printing.

Fused filament fabrication (FFF) 3D printers are increasingly used in industrial, academic, military, and residential sectors, yet their emissions and associated user exposure scenarios are not fully described. Characterization of potential user exposure and environmental releases requires robust investigation. During operation, common FFF 3D printers emit varying amounts of ultrafine particles (UFPs) depending upon feedstock material and operation procedures. Volatile organic compounds associated with these emissions exhibit distinct odors; however, the UFP portion is largely imperceptible by humans. This investigation presents straightforward computational modeling as well as experimental validation to provide actionable insights for the proactive design of lower exposure spaces where 3D printers may be used. Specifically, data suggest that forced clean airflows may create lower exposure spaces, and that computational modeling might be employed to predict these spaces with reasonable accuracy to assist with room design. The configuration and positioning of room air ventilation diffusers may be a key factor in identifying lower exposure spaces. A workflow of measuring emissions during a printing process in an ANSI/CAN/UL 2904 environmental chamber was used to provide data for computational fluid dynamics (CFD) modeling of a 6 m2 room. Measurements of the particle concentrations in a Class 1000 clean room of identical geometry were found to pass the Hanna test for agreement between model and experimental data, validating the findings.

Multi-species Aquatic Toxicity Assessment of 1-Methyl-3-Nitroguanidine (MeNQ).

The Army is replacing traditional munitions with insensitive munitions (IM) resistant to accidental detonation. The aquatic toxicity of 1-methyl-3-nitroguanidine (MeNQ), which is being assessed for potential use in IM formulations, remains largely untested. The present study fills a number of critical data gaps for MeNQ aquatic toxicity by evaluating effects across two vertebrate and five invertebrate species. Specifically, responses in larval Pimephales promelas, Rana pipiens tadpoles, Chironomus dilutus, Lumbriculus variegatus, Hydra littoralis, Hyalella azteca, and Daphnia pulex were assessed in MeNQ exposures across various acute, subchronic, and chronic bioassays. Overall, survival was unaffected in most of the MeNQ exposures where significant lethal effects were only observed in D. pulex, H. littoralis, and C. dilutus and only at concentrations ≥ 2186 mg/L. Significant sublethal effects on growth were observed for C. dilutus at 903 mg/L and H. azteca at 1098 mg/L in 10-d assays. Significantly decreased reproduction was observed at 2775 mg/L for H. azteca in a chronic 35-d assay and at 174 mg/L for D. pulex in the 11-d three-brood assay representing a sublethal effect one order of magnitude more sensitive than the effective lethal concentration for D. pulex (2987 mg/L). Degradation of MeNQ in ultraviolet light (UV) greatly increased toxicity to D. pulex. Specifically, exposure to a MeNQ solution that was completely UV-degraded prior to D. pulex exposures resulted in an 11-d LC50 of 6.1 mg/L and a 50% reduction in reproduction at 3.125 mg/L, based on the original MeNQ parent-compound concentrations.

Genomic investigations of acute munitions exposures on the health and skin microbiome composition of leopard frog (Rana pipiens) tadpoles.

Natural communities of microbes inhabiting amphibian skin, the skin microbiome, are critical to supporting amphibian health and disease resistance. To enable the pro-active health assessment and management of amphibians on Army installations and beyond, we investigated the effects of acute (96h) munitions exposures to Rana pipiens (leopard frog) tadpoles and the associated skin microbiome, integrated with RNAseq-based transcriptomic responses in the tadpole host. Tadpoles were exposed to the legacy munition 2,4,6-trinitrotoluene (TNT), the new insensitive munition (IM) formulation, IMX-101, and the IM constituents nitroguinidine (NQ) and 1-methyl-3-nitroguanidine (MeNQ). The 96h LC50 values and 95% confidence intervals were 2.6 (2.4, 2.8) for ΣTNT and 68.2 (62.9, 73.9) for IMX-101, respectively. The NQ and MeNQ exposures caused no significant impacts on survival in 96h exposures even at maximum exposure levels of 3560 and 5285 mg/L, respectively. However, NQ and MeNQ, as well as TNT and IMX-101 exposures, all elicited changes in the tadpole skin microbiome profile, as evidenced by significantly increased relative proportions of the Proteobacteria with increasing exposure concentrations, and significantly decreased alpha-diversity in the NQ exposure. The potential for direct effects of munitions exposure on the skin microbiome were observed including increased abundance of munitions-tolerant phylogenetic groups, in addition to possible indirect effects on microbial flora where transcriptional responses suggestive of changes in skin mucus-layer properties, antimicrobial peptide production, and innate immune factors were observed in the tadpole host. Additional insights into the tadpole host's transcriptional response to munitions exposures indicated that TNT and IMX-101 exposures significantly enriched transcriptional expression within type-I and type-II xenobiotic metabolism pathways, where dose-responsive increases in expression were observed. Significant enrichment and increased transcriptional expression of heme and iron binding functions in the TNT exposures served as likely indicators of known mechanisms of TNT toxicity including hemolytic anemia and methemoglobinemia. The significant enrichment and dose-responsive decrease in transcriptional expression of cell cycle pathways in the IMX-101 exposures was consistent with previous observations in fish, while significant enrichment of immune-related function in response to NQ exposure were consistent with potential immune suppression at the highest NQ exposure concentration. Finally, the MeNQ exposures elicited significantly decreased transcriptional expression of keratin 16, type I, a gene likely involved in keratinization processes in amphibian skin. Overall, munitions showed the potential to alter tadpole skin microbiome composition and affect transcriptional profiles in the amphibian host, some suggestive of potential impacts on host health and immune status relevant to disease susceptibility.

Comparative Toxicological Evaluation of UV-Degraded versus Parent-Insensitive Munition Compound 1-Methyl-3-Nitroguanidine in Fathead Minnow.

The US Army is replacing traditional munitions with insensitive munitions resistant to accidental detonation. Although the parent insensitive munition compound nitroguanidine (NQ) is generally not acutely toxic at concentrations >1000 mg/L in aquatic exposures, products formed by intensive ultraviolet (UV) degradation resulted in multiple-order of magnitude increases in toxicity. A methylated congener of NQ, 1-methyl-3-nitroguanidine (MeNQ), is also being assessed for potential use in insensitive munition explosive formulations; therefore, the present study investigated the hazard of parent versus UV-degraded MeNQ using fathead minnows (Pimephales promelas). Although up to 716 mg/L parent MeNQ caused no significant mortality or effects on growth in larval P. promelas fish in 7-d exposures, a similar concentration of MeNQ subjected to UV treatment resulted in 85% mortality. The UV treatment degraded only 3.3% of the MeNQ (5800 mg/L stock, UV-treated for 6 h), indicating that MeNQ degradation products have potentially high toxicity. The parent MeNQ exposure caused significantly decreased transcriptional expression of genes within the significantly enriched insulin metabolic pathway, suggesting antagonism of bioenergetics pathways, which complements observed, although nonsignificant, decreases in body weight. Significant differential transcriptional expression in the UV-degraded MeNQ treatments resulted in significant enrichment of pathways and functions related to the cell cycle, as well as erythrocyte function involved in O2 /CO2 exchange. These functions represent potential mechanistic sources of increased toxicity observed in the UV-degraded MeNQ exposures, which are distinct from previously observed mechanisms underlying increased toxicity of UV-degraded NQ in fish. Environ Toxicol Chem 2020;39:612-622. © 2019 SETAC.

Uptake and fate of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in coastal marine biota determined using a stable isotopic tracer, (15)N - [RDX].

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) is globally one of the most commonly used military explosives and environmental contaminant. (15)N labeled RDX was added into a mesocosm containing 9 different coastal marine species in a time series experiment to quantify the uptake of RDX and assess the RDX derived (15)N retention into biota tissue. The (15)N attributed to munitions compounds reached steady state concentrations ranging from 0.04 to 0.67 µg (15)N g dw(-1), the bulk (15)N tissue concentration for all species was 1-2 orders of magnitude higher suggesting a common mechanism or pathway of RDX biotransformation and retention of (15)N. A toxicokinetic model was created that described the (15)N uptake, elimination, and transformation rates. While modeled uptake rates were within previous published values, elimination rates were several orders of magnitude smaller than previous studies ranging from 0.05 to 0.7 days(-1). These small elimination rates were offset by high rates of retention of (15)N previously not measured. Bioconcentration factors and related aqueous:organism ratios of compounds and tracer calculated using different tracer and non-tracer methods yielded a broad range of values (0.35-101.6 mL g(-1)) that were largely method dependent. Despite the method-derived variability, all values were generally low and consistent with little bioaccumulation potential. The use of (15)N labeled RDX in this study indicates four possible explanations for the observed distribution of compounds and tracer; each with unique potential implications for possible toxicological impacts in the coastal marine environment.