RESUMO
Staphylococcus hominis FSEL1 has been isolated from chicken skin. The complete genome sequence of the bacterium comprised one chromosome and two plasmids of 2.44 Mbp. A total of 2,273 CDS, 2,473 genes, 19 rRNAs, 62 tRNAs, and 1 tmRNA were predicted to be present within the genome.
RESUMO
Pork is a common vehicle for foodborne pathogens, including Salmonella spp. and Yersinia enterocolitica. Cross-contamination can occur at any stage of the pork production chain, from farm to market. In the present study, high-throughput sequencing was used to characterize bacterial profiles and track their changes along the whole supply chain. Tracked meat samples (pig on the farm, carcass in the slaughterhouse, unprocessed carcass and processed meat in the processing plant, and fresh pork at the local retail stores) and their associated environmental samples (e.g., water, floor, feed, feces, and workers' gloves) were collected from sequential stages (n = 96) and subjected to 16S rRNA metataxonomic analyses. At the farm, a total of 652 genera and 146 exclusive genera were identified in animal and environmental samples (pig, drain, floor, fan, and feces). Based on beta diversity analysis, it was demonstrated that the microbial composition of animal samples collected at the same processing step is similar to that of environmental samples (e.g., drain, fan, feces, feed, floor, gloves, knives, tables, and water). All animal and environmental samples from the slaughterhouse were dominated by Acinetobacter (55.37 %). At the processing plant, belly meat and neck meat samples were dominated by Psychrobacter (55.49 %). At the retail level, key bacterial players, which are potential problematic bacteria and important members with a high relative abundance in the samples, included Acinetobacter (8.13 %), Pseudomonas (6.27 %), and Staphylococcus (2.13 %). In addition, the number of confirmed genera varied by more than twice that identified in the processing plant. Source tracking was performed to identify bacterial contamination routes in pork processing. Animal samples, including the processing plant's carcass, the pig from the farm, and the unwashed carcass from the slaughterhouse (77.45 %), along with the processing plant's gloves (5.71 %), were the primary bacterial sources in the final product. The present study provides in-depth knowledge about the bacterial players and contamination points within the pork production chain. Effective control measures are needed to control pathogens and major pollutants at each stage of pork production to improve food safety.
Assuntos
Carne de Porco , Carne Vermelha , Animais , Suínos , Carne Vermelha/microbiologia , RNA Ribossômico 16S/genética , Bactérias/genética , Água , Sequenciamento de Nucleotídeos em Larga EscalaRESUMO
Biofilm formation is a strategy in which microorganisms generate a matrix of extracellular polymeric substances to increase survival under harsh conditions. The efficacy of sanitization processes is lowered when biofilms form, in particular on industrial devices. While various traditional and emerging technologies have been explored for the eradication of biofilms, cell resistance under a range of environmental conditions renders evaluation of the efficacy of control challenging. This review aimed to: (1) classify biofilm control measures into chemical, physical, and combination methods, (2) discuss mechanisms underlying inactivation by each method, and (3) summarize the reduction of biofilm cells after each treatment. The review is expected to be useful for future experimental studies and help to guide the establishment of biofilm control strategies in the food industry.
RESUMO
Button mushrooms (Agaricus bisporus), are one of the most widely consumed mushrooms in the world. However, changes within its microbial community as it relates to the use of different raw materials and cultivation methods, as well as potential points of microbial contamination throughout the production process have not been investigated extensively. In the present study, button mushroom cultivation was investigated in each of the four stages (raw materials, composting (phase I, â ¡, and â ¢), casing, and harvesting), and samples (n = 186) from mushrooms and their related environments were collected from four distinct mushroom-growing farms (A-D) in Korea. Shifts within the bacterial consortium during mushroom production were characterized with 16 S rRNA amplicon sequencing. The succession of bacterial communities on each farm was dependent on the raw material incorporated, aeration, and the farm environment. The dominant phyla of the compost stack at the four farms were Pseudomonadota (56.7%) in farm A, Pseudomonadota (43.3%) in farm B, Bacteroidota (46.0%) in farm C, and Bacillota (62.8%) in farm D. During the Phase â , highly heat-resistant microbes, such as those from the phylum Deinococcota (0.6-65.5%) and the families Bacillaceae (1.7-36.3%), Thermaceae (0.1-65.5%), and Limnochordaceae (0.3-30.5%) greatly proliferated. The microbial diversity within compost samples exhibited a marked decline as a result of the proliferation of thermophilic bacteria. In the spawning step, there were considerable increases in Xanthomonadaceae in the pasteurized composts of farms C and D - both of which employed an aeration system. In the harvesting phase, beta diversity correlated strongly between the casing soil layer and pre-harvest mushrooms, as well as between gloves and packaged mushrooms. The results suggest that gloves may be a major source of cross-contamination for packaged mushrooms, highlighting the need for enhanced hygienic practices during the harvesting phase to ensure product safety. These findings contribute to the current understanding of the influence of environmental and adjacent microbiomes on mushroom products to benefit the mushroom industry and relevant stakeholders by ensuring quality production.
Assuntos
Agaricus , Microbiota , Humanos , Agaricus/genética , Microbiota/genética , Bactérias/genética , Sequenciamento de Nucleotídeos em Larga EscalaRESUMO
The microbial ecologies of fish, such as the olive flounder (Paralichthys olivaceus), one of the most widely consumed fish in East Asia, remain to be elucidated. The microbiome of olive flounder and related environmental samples (i.e., feed, water, workers' aprons and gloves) were collected from six different sources (i.e., a fish farm, a transporting truck, a Wando market and restaurant, and a Seoul market and restaurant). These samples (n = 102) were investigated at various farm-to-distribution stages based on their 16S rRNA sequences. The microbial communities of fish from the farms and trucks were dominated by Photobacterium (>86 %) and showed distinct differences from fish from the Wando and Seoul markets and restaurants. There was also a significant difference in fish microbiomes according to geographical location. The relative abundances of Shewanella, Acinetobacter, Enterobacteriaceae, and Pseudomonas increased as the distribution and consumption stages of the supply chain advanced. The percentages of Shewanella (24.74 %), Acinetobacter (18.32 %), and Enterobacteriaceae (11.24 %) in Wando, and Pseudomonas (42.98 %) in Seoul markets and restaurants implied the importance of sanitation control in these areas. Alpha and beta diversity results corresponded to taxonomic analyses and showed the division of two groups (i.e., fish from the production and transporting stage (farm and truck fish) and fish from the distribution and consumption stages (market and restaurant fish)). The present study provides an in-depth understanding of olive flounder and its environmental microbiomes and suggests control measures to improve food safety.
Assuntos
Doenças dos Peixes , Linguado , Animais , Linguado/genética , RNA Ribossômico 16S/genética , Sequenciamento de Nucleotídeos em Larga EscalaRESUMO
This study aimed to investigate the microbiota in raw milk and the influence of storage temperature on the microbiota shift after biofilm formation. Raw milk stored at 4 °C and biofilms developed in raw milk incubated at 4 °C or 25 °C for 7 days were subjected to microbiota analysis as well as quantitative analyses of aerobic or anaerobic bacteria. The levels of aerobic bacteria increased during biofilm formation, while no significant changes were observed within anaerobic bacteria. In addition, there was a difference between aerobic and anaerobic bacterial counts in raw milk and biofilm stored for 7 days. The pattern of microbial composition differed by temperature. In addition, the genus Pseudomonas (53-71%) occupied a high proportion in raw milk, and the raw milk biofilm developed at 4 °C, while the genus Lactobacillus (75-83%) was predominant in biofilms developed at 25 °C. Intriguingly, bacterial richness was higher in raw milk on day 0 and biofilm developed at 4 °C than raw milk after 7 days of storage at 4 °C. These findings suggest that temperature critically affects the bacterial composition of both raw milk and its associated biofilm.
Assuntos
Microbiota , Aço Inoxidável , Animais , Temperatura , Leite , BiofilmesRESUMO
The emergence of antibiotic resistance in foodborne pathogens isolated from meat pro-ducts and their producing environment has been an increasing and leading threat to public health. The aim of the study was to identify pathogens and their antimicrobial resistance isolated from pig production to pork meat distribution phases. Through this study, food spoilage and foodborne or clinical pathogenic bacteria were isolated and identified from pork (belly and neck) meat product and its related environmental samples that include pig swabs, diets, feces, liquid manure, workers' gloves, dust fan swabs, carcass swabs, floor swabs, and drain water in the affiliated farm, slaughterhouse, meat processing plant, and in retail stores. All carcasses at the slaughterhouse and meat products at the meat processing plant were tracked from pigs at a targeted farm. Nine different selective media agars were used to effectively isolate various pathogenic bacteria. A total of 283 presumptive pathogenic bacteria isolated from 126 samples were selected and identified using MALDI-ToF MS. Twenty-three important foodborne pathogens were identified, and some of them, Shiga-toxin-producing E. coli (STEC), Listeria monocytogenes, Staphylococcus aureus, and Yersinia enterocolitica, were further confirmed using PCR. The PFGE patterns of 12 STEC isolates were grouped by sample source or site. All the foodborne pathogens used in the study were not resistant to amoxicillin/clavulanate, ciprofloxacin, and gentamicin, whereas some of the STEC, L. monocytogenes, and S. aureus isolates were resistant to various antibiotics, including ampicillin, erythromycin, tetracycline, and vancomycin. The most common antimicrobial resistance pattern in the pathogenic STEC isolates was AMP-KAN-STR-SXT-TET. Consequently, this study provides valuable information for the distribution of antimicrobial-resistant pathogens along the pork meat production chain and can assist farmers and stakeholders to develop a systematic strategy for reducing the current emergence and spread of antimicrobial resistance in the different phases of pig production and distribution.
RESUMO
The annual consumption and production of oyster mushrooms (Pleurotus ostreatus) have continued to rise due to its nutritive and health-promoting benefits. Cultivated mushrooms are mostly grown in small to medium-scaled scale production plants that present hygienic challenges which could, in turn, increase associated foodborne pathogenic outbreaks. The present study aimed to investigate the shift in microbial ecologies of oyster mushrooms from pre-distribution (cultivation in bottles or on shelves) to post-distribution at supermarkets and open-air markets. Aerobic plate counts and coliforms were quantified using traditional microbiological techniques, and the microbiome associated with oyster mushrooms (n = 70) was analyzed using 16S rRNA amplicon sequencing for an enhanced level of bacterial microbiota profiling. Overall, coliforms recovered from pre-distribution bottle-cultivated mushrooms were 1.9 log CFU/g higher (p < 0.05) than that of shelf-cultivated mushrooms. The mean aerobic plate counts of oyster mushrooms distributed to open-air markets was 1.2 log CFU/g higher (p < 0.05) than packaged mushrooms from supermarkets while there were no significant differences in coliform counts. The pattern of bacterial composition differed by post-distribution channels, with oyster mushrooms collected from the open-air markets demonstrating the richest microbiome diversity. An increase in the relative abundance of Enterobacteriaceae (55-68 %) and Pseudomonadaceae (27-35 %) was observed in pre- and post-distribution mushrooms, respectively. However, no distinct bacterial microbiota differences were observed for the different cultivation methods or different geographical locations for each market type. The current findings add to our understanding of the effects of cultivation methods and commercial distribution channels regarding the microbiome of oyster mushrooms and may inform potential intervention strategies for future production and distribution processes. Furthermore, the tandem analyses of culture-dependent and culture-independent methods can provide more comprehensive information than that obtained when using each approach independently.
Assuntos
Agaricus , Microbiota , Pleurotus , Bactérias/genética , Sequenciamento de Nucleotídeos em Larga Escala , RNA Ribossômico 16S/genéticaRESUMO
Sprouts harbor high levels of bacteria and have been implicated in massive outbreaks of foodborne illnesses. The elucidation of microbial profiles in sprouts is important; however, little is known about the changes in the microbial composition during production. The present study aimed to define the microbial ecology of sprouts during the stages of production using 16S rRNA metagenome sequencing and culture-dependent methods. Samples of three types of sprouts (alfalfa, radish, and rapeseed) were collected from each stage of production (seed, soaking, germination 1 (Germ 1), germination 2 (Germ 2), sprouting, unwashed, and washed sprouts; n = 105) and subjected to microbiome analyses as well as quantitative and qualitative analyses. Aerobic plate count (APC) and coliforms levels significantly increased within one day (Germ 1) by 3.9-4.4 and 4.2-5.2 log CFU/g, respectively, and levels up to 8.0-9.0 and 6.9-9.0 log CFU/g, respectively, were recorded at the final stage. During production, the microbial communities in alfalfa sprouts simplified into Enterobacteriaceae (80.97-99.29%), whereas the radish and rapeseed sprouts were dominated by microbial communities belonging to two families, the Enterobacteriaceae (radish: 32-43.4%, rapeseed: 24.11-38.39%) and Pseudomonadaceae (radish: 30.53-46.45%, rapeseed: 41.51-57.34%). This suggests that the sprout manufacturing conditions could promote the growth of particular bacterium. Alpha diversity analysis revealed a diverse bacterial community structure in the seeds; however, the diversity sharply declined until Germ 1 and recovered during the production steps thereafter. Beta diversity results suggested that the pattern of microbial composition, and the major shifts in composition, differed by seed type. Significant changes in the bacterial community were observed during the soaking (alfalfa), Germ 1 (radish), and Germ 2 (rapeseed) stages. The present study is the first fundamental report to investigate microbial changes by during the various stages of the sprouting process. The results highlight the potential risk of sprouts regarding foodborne illness and facilitate the determination of effective intervention points during sprout production.
Assuntos
Brassica napus , Microbiota , Raphanus , Contagem de Colônia Microbiana , Microbiologia de Alimentos , Humanos , Medicago sativa , Microbiota/genética , RNA Ribossômico 16S/genética , SementesRESUMO
Sprouts are the leading cause of foodborne disease outbreaks globally, mainly because the specialized conditions required to germinate seed sprouts for human consumption contribute to an environment that allows pathogenic bacteria to flourish. To reduce risk of illness, current food safety guidelines in the United States and Canada recommend hypochlorite treatment for seed sanitation. However, many growers and consumers have become wary of the impact of hypochlorite on human health and the environment and are actively seeking less caustic approaches. Here, we evaluated the effects of both the traditional hypochlorite treatment and a milder alternative on nontyphoidal Salmonella enterica colonization of germinating alfalfa seed. Moreover, we explored three biological factors as potential contributors for inhibition of S. enterica growth: colonization by indigenous bacteria, seed composition changes, and seed metabolite release. In this experimental setting, we found that a combinatorial treatment of heat, peroxide, and acetic acid was as effective as hypochlorite for inhibiting S. enterica growth. Notably, we pinpointed N-acetyl-spermidine as an endogenous metabolite exuded by treated seeds that strongly inhibits S. enterica growth. In doing so, we both elucidated one of the mechanisms of chemical sanitation and highlighted a potential seed-derived mode of antimicrobial treatment that may apply to modernized food safety protocols.IMPORTANCE Warm, humid, and nutrient-rich conditions that are used to produce sprouts encourage Salmonella enterica to proliferate. However, many disparate sanitation methods exist, and there is currently no single treatment that can guarantee pathogen-free seeds. Here, we compared the ability of traditional hypochlorite treatment against a combinatorial treatment of heat, peroxide, and vinegar (HPA) commonly used in organic farming practices to inhibit S. enterica colonization and growth during alfalfa germination and found HPA to be at least as effective. Furthermore, we explored seed-based changes following sanitization treatments using metabolomics and identified polyamines as strong inhibitors of Salmonella growth on germinating alfalfa. Our findings enable a better understanding of host-pathogen interactions in sprout microbial communities and promote in-depth, evidence-based research in seed sprout safety.
RESUMO
Nanopatterning and anti-biofilm characterization of self-cleanable surfaces on stainless steel substrates were demonstrated in the current study. Electrochemical etching in diluted aqua regia solution consisting of 3.6% hydrogen chloride and 1.2% nitric acid was conducted at 10 V for 5, 10, and 15 min to fabricate nanoporous structures on the stainless steel. Variations in the etching rates and surface morphologic characteristics were caused by differences in treatment durations; the specimens treated at 10 V for 10 min showed that the nanoscale pores are needed to enhance the self-cleanability. Under static and realistic flow environments, the populations of Escherichia coli O157:H7 and Salmonella Typhimurium on the developed features were significantly reduced by 2.1-3.0 log colony-forming unit (CFU)/cm2 as compared to bare stainless steel (p < 0.05). The successful fabrication of electrochemically etched stainless steel surfaces with Teflon coating could be useful in the food industry and biomedical fields to hinder biofilm formation in order to improve food safety.
RESUMO
Recently, various types of porous surfaces have been demonstrated for lubricant (e.g., oil) impregnated omniphobic surfaces. However, the retention of the lubricating liquid within the porous layer and the omniphobic durability still remain challenges. Here, the omniphobic durability of the oil-impregnated surfaces of various types of anodic aluminum oxide (AAO) nanostructures is investigated. The oil impregnation into nanoporous AAO with high porosity enhances droplet mobility by eliminating the pinning site of a contact line on the solid surface, whereas that with low porosity allows the pinning site to result in less mobility. In the cases of nanopillared AAO layers, although the oil-impregnation enhances the repellency to liquids, oil is prone to be depleted by external force such as fluid flow due to the nature of the interconnected oil through the passages between pillars, which limits the omniphobic durability. Among the various types of nanostructured AAO surfaces, the AAO with isolated pore geometry with high porosity exhibits the most durable omniphobicity for a wide range of liquids including organic liquids with low surface tensions. Moreover, the nanoporous AAO surface shows great anti-bacterial adhesion property, reducing the adhesion of bacteria (Escherichia coli K-12) up to 99.2% compared to a bare aluminum surface.
RESUMO
This study was performed to compare the effectiveness of saturated steam and superheated steam for the inactivation of Escherichia coli O157:H7, Salmonella typhimurium, and Listeria monocytogenes on the surface of cherry tomatoes and oranges. It also determined the effect of the steam processes on the color, texture, Vitamin C content, and antioxidant capacity and changes in these parameters during chilled storage. Cherry tomatoes and oranges inoculated with the three foodborne pathogens were treated with saturated steam at 100⯰C and superheated steam at 125, 150, 175, and 200⯰C for various time intervals. After the cherry tomatoes and oranges were exposed to superheated steam at 200⯰C for 3 or 20â¯s, all tested pathogens were reduced to below the detection limit (1 or 1.7 log, respectively) without significant changes in color, texture, vitamin C content, and antioxidant capacity (Pâ¯>â¯.05) at 4⯰C for up to 9â¯days. Our results suggest that superheated steam treatment can be effective at decreasing pathogen populations when compared to saturated steam, without significant quality deterioration, and thus, this technique demonstrates great potential to improve the microbial safety of fresh produce.
Assuntos
Citrus sinensis/microbiologia , Escherichia coli/crescimento & desenvolvimento , Microbiologia de Alimentos/métodos , Doenças Transmitidas por Alimentos/prevenção & controle , Frutas/microbiologia , Listeria monocytogenes/crescimento & desenvolvimento , Pasteurização/métodos , Salmonella typhimurium/crescimento & desenvolvimento , Solanum lycopersicum/microbiologia , Antioxidantes/análise , Ácido Ascórbico/análise , Citrus sinensis/química , Cor , Escherichia coli/patogenicidade , Infecções por Escherichia coli/microbiologia , Infecções por Escherichia coli/prevenção & controle , Doenças Transmitidas por Alimentos/microbiologia , Frutas/química , Temperatura Alta , Listeria monocytogenes/patogenicidade , Listeriose/microbiologia , Listeriose/prevenção & controle , Solanum lycopersicum/química , Viabilidade Microbiana , Intoxicação Alimentar por Salmonella/microbiologia , Intoxicação Alimentar por Salmonella/prevenção & controle , Salmonella typhimurium/patogenicidade , Vapor , Fatores de TempoRESUMO
The combined effect of chemical sanitizers including sodium hypochlorite, hydrogen peroxide, iodophor, and benzalkonium chloride with steam heating on the inactivation of biofilms formed by Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on stainless steel was investigated. Six day old biofilms, comprised of a mixture of three strains each of three foodborne pathogens, were produced on stainless steel coupons at 25 °C and treated with each sanitizer alone (for 5, 15, and 30 s), steam alone (for 5, 10, and 20 s), and the combination. There was a synergistic effect of sanitizer and steam on the viability of biofilm cells of the three pathogens as evidenced by plating counts and imaging. The combination treatment achieved an additional 0.01 to 2.78 log reduction compared to the sum of each individual treatment. The most effective combination for reducing levels of biofilm cells was the combination of steam and iodophor; steam for 20 s and merely 20 ppm iodophor for 30 s reduced cell numbers to below the detection limit (<1.48 log CFU/coupon). These results suggest that the combination treatment of sanitizer with steam can be applied to control foodborne pathogens biofilm cells in food processing facilities as a potential intervention.
Assuntos
Biofilmes , Desinfetantes/farmacologia , Desinfecção/métodos , Escherichia coli O157/crescimento & desenvolvimento , Listeria monocytogenes/crescimento & desenvolvimento , Salmonella typhimurium/crescimento & desenvolvimento , Aço Inoxidável/análise , Desinfecção/instrumentação , Escherichia coli O157/efeitos dos fármacos , Escherichia coli O157/fisiologia , Listeria monocytogenes/efeitos dos fármacos , Listeria monocytogenes/fisiologia , Viabilidade Microbiana , Salmonella typhimurium/efeitos dos fármacos , Salmonella typhimurium/fisiologia , Hipoclorito de Sódio/farmacologia , Vapor/análiseRESUMO
This study was undertaken to evaluate the effectiveness of superheated steam (SHS) on the inactivation of Escherichia coli O157:H7, Salmonella Typhimurium, Salmonella Enteritidis phage type (PT) 30 and Listeria monocytogenes on almonds and in-shell pistachios and to determine the effect of superheated steam heating on quality by measuring color and texture changes. Almonds and in-shell pistachios inoculated with four foodborne pathogens were treated with saturated steam (SS) at 100 °C and SHS at 125, 150, 175, and 200 °C for various times. Exposure of almonds and pistachios to SHS for 15 or 30s at 200 °C achieved >5l og reductions among all tested pathogens without causing significant changes in color values or texture parameters (P>0.05). For both almonds and pistachios, acid and peroxide values (PV) following SS and SHS treatment for up to 15s and 30s, respectively, were within the acceptable range (PV<1.0 meq/kg). These results show that thermal application of 200 °C SHS treatment for 15s and 30s did not affect the quality of almonds and pistachios, respectively. Therefore, SHS treatment is a very promising alternative technology for the tree nuts industry by improving inactivation of foodborne pathogens on almonds and pistachios while simultaneously reducing processing time.
Assuntos
Escherichia coli O157/fisiologia , Microbiologia de Alimentos/métodos , Viabilidade Microbiana , Pistacia/microbiologia , Prunus dulcis/microbiologia , Vapor , Fenômenos Fisiológicos Bacterianos , Bacteriófagos/fisiologia , Contagem de Colônia Microbiana , Listeria monocytogenes/fisiologia , Salmonella enteritidis/fisiologia , Salmonella typhimurium/fisiologiaRESUMO
Superheated steam (SHS), produced by the addition of heat to saturated steam (SS) at the same pressure, has great advantages over conventional heat sterilization due to its high temperature and accelerated drying rate. We previously demonstrated that treatment with SHS at 200°C for 10 sec inactivated Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes biofilm cells on the surface of stainless steel to below the detection limit. However, bacteria withstanding heat stress become more resistant to other stress conditions, and may be more virulent when consumed by a host. Herein, we studied the transcriptional regulation of genes important for stress resistance and virulence in Salmonella biofilms after SHS treatments. Genes encoding heat shock proteins and general stress resistance proteins showed transcriptional surges after 1 sec of SHS treatment at 200°C, with parallel induction of stress-related regulator genes including rpoE, rpoS, and rpoH. Interestingly, Salmonella biofilm cells exposed to SHS showed decreased transcription of flagella and Salmonella pathogenicity island-1 (SPI-1) genes required for motility and invasion of host cells, respectively, whereas increased transcription of SPI-2 genes, important for bacterial survival and replication inside host cells, was detected. When the transcriptional response was compared between cells treated with SHS (200°C) and SS (100°C), SHS caused immediate changes in gene expression by shorter treatments. Understanding the status of Salmonella virulence and stress resistance induced by SHS treatments is important for wider application of SHS in controlling Salmonella biofilm formation during food production.
Assuntos
Microbiologia de Alimentos , Regulação Bacteriana da Expressão Gênica , Genes Bacterianos/genética , Salmonella typhimurium/genética , Vapor , Virulência/genéticaRESUMO
Three types (A, B, and C) of peanut butter product with different water activities (0.18, 0.39, and 0.65 aw) inoculated with a 3-strain mixture of Salmonella Typhimurium were subjected to gamma irradiation (6°Co) treatment, with doses ranging from 0 to 3 kGy. The inactivation of S. Typhimurium in the 3 types of treated peanut butter product over a 14 day storage period and the influence of storage temperature at 4 (refrigerated) and 25 °C (ambient), and peanut butter product formulation were investigated. Three types of peanut butter product inoculated with S. Typhimurium to a level of ca. 6.6 log CFU/g and subjected to gamma irradiation experienced significant (p<0.05) reductions of 1.3 to 1.9, 2.6 to 2.8, and 3.5 to 4.0 log CFU/g at doses of 1, 2, and 3 kGy, respectively. The time required to reduce S. Typhimurium in peanut butter product to undetectable levels was 14, 5, and 5 days at 25°C after exposure to 3 kGy for products A, B, and C, respectively, and 7 days at 25 °C following exposure to 2 kGy for product C. During storage at 4 and 25 °C, survival of S. Typhimurium was lowest in product C compared to products A and B. Water activity (a(w)) of peanut butter product was likely the most critical factor affecting pathogen survival. When a(w) is reduced, radiolysis of water is reduced, thereby decreasing antimicrobial action. Overall, death was more rapid at 25 °C versus 4 °C for all peanut butter products during 14 day storage. Following gamma irradiation, acid values of peanut butter product were not significantly different from the control, and general observations failed to detect changes in color and aroma, even though lightness observed using a colorimeter was slightly reduced on day 0. The use of gamma irradiation has potential in preventing spoilage of post-packaged food by destroying microorganisms and improving the safety and quality of foods without compromising sensory quality.
Assuntos
Arachis/microbiologia , Irradiação de Alimentos/normas , Microbiologia de Alimentos , Armazenamento de Alimentos/normas , Raios gama , Viabilidade Microbiana/efeitos da radiação , Salmonella typhimurium/efeitos da radiação , Ácidos/análise , Contagem de Colônia Microbiana , Cor , Manipulação de Alimentos , Temperatura , Fatores de TempoRESUMO
This study was designed to investigate the individual and combined effects of steam and lactic acid (LA) on the inactivation of biofilms formed by Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on polyvinyl chloride (PVC) and stainless steel. Six day old biofilms were developed on PVC and stainless steel coupons by using a mixture of three strains each of three foodborne pathogens at 25°C. After biofilm development, PVC and stainless steel coupons were treated with LA alone (immersed in 0.5% or 2% for 5s, 15s, and 30s), steam alone (on both sides for 5, 10, and 20s), and the combination of steam and LA. The numbers of biofilm cells of the three foodborne pathogens were significantly (p<0.05) reduced as the amount of LA and duration of steam exposure increased. There was a synergistic effect of steam and LA on the viability of biofilm cells of the three pathogens. For all biofilm cells of the three foodborne pathogens, reduction levels of individual treatments ranged from 0.11 to 2.12 log CFU/coupon. The combination treatment of steam and LA achieved an additional 0.2 to 2.11 log reduction compared to the sum of individual treatments. After a combined treatment of immersion in 2% LA for 15s or 30s followed by exposure to steam for 20s, biofilm cells of the three pathogens were reduced to below the detection limit (1.48 log). From the results of this study, bacterial populations of biofilms on PVC coupons did not receive the same thermal effect as on stainless steel coupons. Effectiveness of steam and LA may be attributed to the difference between Gram-negative and Gram-positive characteristics of the bacteria studied. The results of this study suggest that the combination of steam and LA has potential as a biofilm control intervention for food processing facilities.