RESUMO
Presently, signal generation in MRI depends on the concentration and relaxivity of protons or other MR-active nuclei, and contrast depends on local differences in signal. In this proof-of-principle study, we explore the use of nonchemical, solid-state devices for generating detectable signal and/or contrast in vitro and in vivo. We introduce the concept of microresonant devices (MRDs), which are micron-sized resonators fabricated using microelectromechanical systems (MEMS) technology. Fifteen-micrometer (15-microm)-thick, coil MRDs were designed to resonate at the 3T Larmor frequency of protons (127.7 MHz) and were fabricated using tantalum (Ta) oxide thin-film capacitors and copper-plated spiral inductors. The performance of MRDs having final diameters of 300, 500, and 1000 microm were characterized in saline using a radio frequency (RF) scanning microscope and a clinical 3T MR scanner. The measured B(1) fields of 300 microm to 1000 microm MRDs ranged from 3.25 microT to 3.98 microT, and their quality factors (Q) ranged from 3.9 to 7.2. When implanted subcutaneously in the flank of a mouse, only MRDs tuned to the resonant frequency of protons generated a measurable in vivo B(1) field. This study lays the foundation for a new class of solid-state contrast agents for MRI.
Assuntos
Aumento da Imagem/instrumentação , Imageamento por Ressonância Magnética/instrumentação , Sistemas Microeletromecânicos/instrumentação , Transdutores , Animais , Meios de Contraste , Desenho de Equipamento , Análise de Falha de Equipamento , Camundongos , Reprodutibilidade dos Testes , Semicondutores , Sensibilidade e Especificidade , VibraçãoRESUMO
A two-axis scanning catheter was developed for 3D endoscopic imaging with spectral domain optical coherence tomography (SD-OCT). The catheter incorporates a micro-mirror scanner implemented with microelectromechanical systems (MEMS) technology: the micro-mirror is mounted on a two-axis gimbal comprised of folded flexure hinges and is actuated by magnetic field. The scanner can run either statically in both axes or at the resonant frequency (>= 350Hz) for the fast axis. The assembled catheter has an outer diameter of 2.8 mm and a rigid part of 12 mm in length. Its scanning range is +/- 20 in optical angle in both axes with low voltages (1 approximately 3V), resulting in a scannable length of approximately 1 mm at the surface in both axes, even with the small catheter size. The catheter was incorporated with a multi-functional SD-OCT system for 3D endoscopic imaging. Both intensity and polarization-sensitive images could be acquired simultaneously at 18.5K axial scans/s. In vivo 3D images of human fingertips and oral cavity tissue are presented as a demonstration.