Micropatterned Elastomeric Composites for Encapsulation of Transient Electronics.

Although biodegradable, transient electronic devices must dissolve or decompose via environmental factors, an effective waterproofing or encapsulation system is essential for reliable, durable operation for a desired period of time. Existing protection approaches use multiple or alternate layers of electrically inactive organic/inorganic elements combined with polymers; however, their high mechanical stiffness is not suitable for soft, time-dynamic biological tissues/skins/organs. Here, we introduce a stretchable, bioresorbable encapsulant using nanoparticle-incorporated elastomeric composites with modifications of surface morphology. Nature-inspired micropatterns reduce the diffusion area for water molecules, and embedded nanoparticles impede water permeation, which synergistically enhances the water-barrier performance. Empirical and theoretical evaluations validate the encapsulation mechanisms under strains. Demonstration of a soft, degradable shield with an optical component under a biological solution highlights the potential applicability of the proposed encapsulation strategy.

Electrochemical sensing based on printable temporary transfer tattoos.

The realization of epidermal chemical sensing requires a fabrication methodology compatible with the non-planarity and irregularities of the human anatomy. This communication describes the development of printed temporary transfer tattoo (T3) electrochemical sensors for physiological and security monitoring of chemical constituents leading to the demonstration of 'electronic skin'.

Stamp transfer electrodes for electrochemical sensing on non-planar and oversized surfaces.

This article describes a new alternative approach to the fabrication of printed electrochemical sensors and biosensors based on the transfer of electrode patterns comprising common conductive and insulating inks from elastomeric stamps to a wide variety of rigid and flexible substrates. This simple, low cost, yet robust methodology is demonstrated to be well-suited for the formation of electrochemical sensors on non-planar substrates and large objects/structures, which have traditionally been off-limits to conventional screen printing techniques. Furthermore, the stamped electrode devices are shown to exhibit electrochemical performance that rivals that of their screen printed counterparts and display resilience against severe mechanical deformation. The stamp transfer approach is further extended to the demonstration of epidermal electrochemical sensors through the transfer of the electrode patterns directly onto the skin. The resulting sensors demonstrate a wide range of usability, from the detection of various physiological analytes, including uric acid on the skin, to the identification of residues originating from the handling of munitions and explosives. The migration of printable electrochemical sensors to non-conventional (non-planar and/or oversized) surfaces provides new opportunities within the personal healthcare, fitness, forensics, homeland security, and environmental monitoring domains.

Fundamentals and application of ordered molecular assemblies to affinity biosensing.

Organization of biomolecules in two/three dimensional assemblies has recently aroused much interest in nanobiotechnology. In this context, the development of techniques for controlling spatial arrangement and orientation of the desired molecules to generate highly-ordered nanostructures in the form of a mono/multi layer is considered highly significant. The studies of monolayer films to date have focused on three distinct methods of preparation: (i) the Langmuir-Blodgett (LB) technique, involving the transfer of a monolayer assembled at the gas-liquid interface; (ii) self-assembly at the liquid-solid interface, based on spontaneous adsorption of desired molecules from a solution directly onto a solid surface; and (iii) Layer-by-layer (LBL) self-assembly at a liquid-solid interface, based on inter-layer electrostatic attractions for fabrication of multilayers. A variety of monolayers have been utilized to fabricate biomolecular electronic devices including biosensors. The composition of a monolayer based matrix has been found to influence the activity(ies) of biomolecule(s). We present comprehensive and critical analysis of ordered molecular assemblies formed by LB and self-assembly with potential applications to affinity biosensing. This critical review on fundamentals and application of ordered molecular assemblies to affinity biosensing is likely to benefit researchers working in this as well as related fields of research (401 references).

Nanostructured conducting polymer based reagentless capacitive immunosensor.

Nanostructured polyaniline (PANI) film electrophoretically fabricated onto indium-tin-oxide (ITO) coated glass plate has been utilized for development of an immunosensor based on capacitance change of a parallel plate capacitor (PPC) by covalently immobilizing anti-human IgG (Anti-HIgG) using N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide chemistry. These fabricated PANI/ITO and Anti-HIgG/PANI/ITO plates have been characterized using scanning electron microscopy, cyclic voltammetry, differential pulse voltammetry and Fourier transform infra-red studies. The capacitance measurements indicate that dielectric medium of this biologically modified PPC (Anti-HIgG/PANI/ITO) is sensitive to HIgG in 5 - 5 x 10(5) ng mL(-1) range and has lower detection limit of 1.87 ng mL(-1). The observed results reveal that this Anti-HIgG modified PPC can be used as a robust, easy-to-use, reagentless, sensitive and selective immunosensor for estimation of human IgG.

Low density lipoprotein detection based on antibody immobilized self-assembled monolayer: investigations of kinetic and thermodynamic properties.

Human plasma low density lipoprotein (LDL) immunosensor based on surface plasmon resonance (SPR) and quartz crystal microbalance (QCM) was fabricated by immobilizing antiapolipoprotein B (AAB) onto self-assembled monolayer (SAM) of 4-aminothiophenol (ATP). The AAB/ATP/Au immunosensor can detect LDL up to 0.252 microM (84 mg/dL) and 0.360 microM (120 mg/dL) with QCM and SPR, respectively. The SPR and QCM measurements were further utilized to study the reaction kinetics of the AAB-LDL interaction. The adsorption process involved was explored using Langmuir adsorption isotherm and Freundlich adsorption models. The thermodynamic parameters such as change in Gibb's free energy (DeltaG(ads)), change in enthalpy (DeltaH(ads)), and change in entropy (DeltaS(ads)) determined at 283, 298, and 308 K revealed that the AAB-LDL interaction is endothermic in nature and is governed by entropy. Kinetic, thermodynamic, and sticking probability studies disclosed that desorption of the water molecules from the active sites of AAB and LDL plays a key role in the interaction process and increase in temperature favors binding of LDL with the AAB/ATP/Au immunosensor. Thus, the studies were utilized to unravel the most important subprocess involved in the adsorption of LDL onto AAB-modified ATP/Au surface that may help in the fabrication of LDL immunosensors with better efficiency.