Carbon dots obtained using hydrothermal treatment of formaldehyde. Cell imaging in vitro.

Highly photoluminescent carbon dots have been prepared in a one step procedure by hydrothermal treatment of formaldehyde at 180 °C. They show green fluorescence under UV light exposure and emission spectra are centered at 440 nm. Fluorescence lifetimes comprise between 0.7 and 2.70 ns, when the synthesis process lasted for 1-7 days. TEM images of nanoparticles showed a homogeneous size/shape distribution. When the thermal treatment process was carried out for a long time (30 days) formation of aggregates occurred. Carbon dots were further analyzed using (1)H and (13)C-NMR, Raman and FTIR spectroscopy techniques and XPS. Cell imaging of nanoparticles was carried out by using mouse MC3T3-E1 pre-osteoblasts as a model. The nanoparticles were selectively localized in the cytoplasm without further functionalization and could be realized by cellular phagocytosis, so that the fluorescence of these can be used for live cell imaging in vitro.

A study of ignition of metal impregnated carbons: the influence of oxygen content in the activated carbon matrix.

A study of the reason for the early ignition of coconut-based impregnated carbon in comparison with the peat-based impregnated carbon was conducted. The surface features of carbons were evaluated using various physicochemical methods. The metal analysis of the initial carbon indicated that the content of potassium was higher in the coconut-based carbon. The surface functional group analysis revealed the presence of similar surface species; however, the peat-based carbon was more acidic in its chemical nature. Since the oxygen content was higher in the peat-based carbon, the early ignition of the coconut-based material was attributed to its higher affinity to chemisorb oxygen, which leads to exothermic effects. This conclusion was confirmed by performing oxidation of coconut-based carbon prior to impregnation. This process increased the ignition temperature for Cu/Cr impregnated coconut-based material from 186 to 289 degrees C and for the Cu/Zn/Mo impregnated carbon from 235 to 324 degrees C.

Influence of organics on the structure of water adsorbed on activated carbons.

The influence of organics on the structure of water adsorbed on activated carbons was studied using adsorption of nitrogen, benzene, and water, and by (1)H NMR spectroscopy with freezing out of bulk water with the presence of benzene-d(6) or chloroform-d. It was found that interactions of water with the activated carbon surface depend on both structural characteristics (contributions of micro- and mesopores, pore size distributions) of adsorbents and chemical properties (changed by oxidation or reduction) of the adsorbents. Moreover, the interfacial behavior of water is affected by water-insoluble organics such as benzene and chloroform. Changes in the Gibbs free energy of water adsorbed on carbons exposed to air, water, chloroform-d, or benzene-d(6) are related to textural properties of adsorbents and the degree of their oxidation. Since chloroform-d and benzene-d(6) are strongly adsorbed on activated carbons and immiscible with water they replace a significant portion of adsorbed water in micropores, on the walls of mesopores, and in the transport pores of carbons causing changes in the Gibbs free energy and other characteristics of water.

Adsorption of SO2 on sewage sludge-derived materials.

Sewage sludge-derived materials carbonized at temperatures between 400 and 950 degrees C were used for adsorption of sulfur dioxide from dry and moist air. The materials were characterized using sorption of nitrogen and thermal analysis. The sulfur dioxide capacity was measured according to a laboratory-developed breakthrough test. It was found that the capacity of the adsorbents increases with increasing temperature of carbonization. It is likely that during carbonization at high temperatures such catalytic metals as calcium become active. They play a significant role in the SO2 removal process by neutralization of sulfuric acid formed as a result of oxidation of sulfur dioxide in wet conditions. Besides sulfuric acid, various sulfur-containing salts are formed. It was shown that, after their removal using waterwashing,the SO2 capacitysignificantly decreased.

Sewage sludge-derived materials as efficient adsorbents for removal of hydrogen sulfide.

Sewage sludge-derived materials were used as adsorbents of hydrogen sulfide from moist air. The adsorbent obtained by carbonization at 950 degrees C has a capacity twice of that of coconut-shell-based activated carbon. The capacity of the sludge-derived materials increases with increasing carbonization temperature. It is likelythatduring carbonization at 950 degrees C a mineral-like phase is formed that consists of such catalytically active metals as iron, zinc, and copper. The results obtained demonstrate that the presence of iron oxide significantly increases the capacity of commercial carbon and activated alumina. The sludge-derived adsorbents are efficient for hydrogen sulfide removal until the pore entrances are blocked with sulfur as the product of oxidation reaction. For materials in which the catalytic effect is predominant, hydrogen sulfide is adsorbed until all pores are filled with sulfur. There is also indication that chemisorption plays a significant role in the removal of hydrogen sulfide from moist air.