Interface-modulated kinetic differentials in electron and hole transfer rates as a key design principle for redox photocatalysis by Sb2VO5/QD heterostructures.

The efficient conversion of solar energy to chemical energy represents a critical bottleneck to the energy transition. Photocatalytic splitting of water to generate solar fuels is a promising solution. Semiconductor quantum dots (QDs) are prime candidates for light-harvesting components of photocatalytic heterostructures, given their size-dependent photophysical properties and band-edge energies. A promising series of heterostructured photocatalysts interface QDs with transition-metal oxides which embed midgap electronic states derived from the stereochemically active electron lone pairs of p-block cations. Here, we examine the thermodynamic driving forces and dynamics of charge separation in Sb2VO5/CdSe QD heterostructures, wherein a high density of Sb 5s2-derived midgap states are prospective acceptors for photogenerated holes. Hard-x-ray valence band photoemission spectroscopy measurements of Sb2VO5/CdSe QD heterostructures were used to deduce thermodynamic driving forces for charge separation. Interfacial charge transfer dynamics in the heterostructures were examined as a function of the mode of interfacial connectivity, contrasting heterostructures with direct interfaces assembled by successive ion layer adsorption and reaction (SILAR) and interfaces comprising molecular bridges assembled by linker-assisted assembly (LAA). Transient absorption spectroscopy measurements indicate ultrafast (<2 ps) electron and hole transfer in SILAR-derived heterostructures, whereas LAA-derived heterostructures show orders of magnitude differentials in the kinetics of hole (<100 ps) and electron (∼1 ns) transfer. The interface-modulated kinetic differentials in electron and hole transfer rates underpin the more effective charge separation, reduced charge recombination, and greater photocatalytic efficiency observed for the LAA-derived Sb2VO5/CdSe QD heterostructures.

Effect of pre-intercalation on Li-ion diffusion mapped by topochemical single-crystal transformation and operando investigation.

Limitations in electrochemical performance as well as supply chain challenges have rendered positive electrode materials a critical bottleneck for Li-ion batteries. State-of-the-art Li-ion batteries fall short of accessing theoretical capacities. As such, there is intense interest in the design of strategies that enable the more effective utilization of active intercalation materials. Pre-intercalation with alkali-metal ions has attracted interest as a means of accessing higher reversible capacity and improved rate performance. However, the structural basis for improvements in electrochemical performance remains mostly unexplored. Here we use topochemical single-crystal-to-single-crystal transformations in a tunnel-structured ζ-V2O5 positive electrode to illustrate the effect of pre-intercalation in modifying the host lattice and altering diffusion pathways. Furthermore, operando synchrotron X-ray diffraction is used to map Li-ion site preferences and occupancies as a function of the depth of discharge in pre-intercalated materials. Na- and K-ion intercalation 'props open' the one-dimensional tunnel, reduces electrostatic repulsions between inserted Li ions and entirely modifies diffusion pathways, enabling orders of magnitude higher Li-ion diffusivities and accessing higher capacities. Deciphering the atomistic origins of improved performance in pre-intercalated materials on the basis of single-crystal-to-single-crystal topochemical transformation and operando diffraction studies paves the way to site-selective modification approaches for positive electrode design.

Tetrapodal textured Janus textiles for accessible menstrual health.

Menstruating individuals without access to adequate hygiene products often improvise with alternatives that pose health risks and limit their participation in society. We describe here a menstrual hygiene product based on low-cost materials, which are integrated onto fabrics to imbue unidirectional permeability. A body-facing "Janus" fabric top layer comprising ZnO tetrapods spray-coated onto polyester mosquito netting imparts hierarchical texturation, augmenting the micron-scale texturation derived from the weave of the underlying fabric. The asymmetric coating establishes a gradient in wettability, which underpins flash spreading and unidirectional permeability. The hygiene product accommodates a variety of absorptive media, which are sandwiched between the Janus layer and a second outward-facing coated densely woven fabric. An assembled prototype demonstrates outstanding ability to wick saline solutions and a menstrual fluid simulant while outperforming a variety of commercially alternatives. The results demonstrate a versatile menstrual health product that provides a combination of dryness, discretion, washability, and safety.

Effect of Stereochemically Active Electron Lone Pairs on Magnetic Ordering in Trivanadates.

Stereoactive electron lone pairs derived from filled 5/6s2 states of p-block cations are an intriguing electronic and geometric structure motif that have been exploited for diverse applications such as thermoelectrics, thermochromics, photocatalysis, and nonlinear optics. Layered trivanadates are dynamic intercalation hosts, where the insertion of cations can be used to tune electron correlation, charge localization, and magnetic ordering. However, the interaction of 5/6s2 stereoactive electron lone pairs with layered trivanadates remains unexplored. In this study, we contrast s- and p-block trivanadates and map off-centering in the coordination environment and reduction in symmetry arising from the stereochemical activity of lone pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p hybridized states. The former is studied by high-resolution single-crystal X-ray diffraction studies of TlV3O8 and isostructural RbV3O8 to probe distinct differences in Tl and Rb coordination environments and the resulting modulation of V-V interactions in V3O8 slabs. The latter has been probed by variable-energy hard X-ray photoelectron spectroscopy (HAXPES) measurements, which manifest orbital-specific contributions from bonding and antibonding interactions of stereoactive Tl 6s2 electron lone pairs in TlV3O8. The spectroscopic assignment of valence band states to stereoactive lone pairs is further corroborated by first-principles electronic structure calculations, crystal orbital Hamilton population analyses, and electron localization function maps. The presence of the Tl 6s2 electron lone pair in TlV3O8 brings about the off-centering of Tl+ cations, which leads to anisotropy in Tl-O bonds. The off-centering of Tl ions weakens V-O bonds in one direction, which subsequently strengthens directional V-V coupling. Magnetic measurements reveal ferromagnetic signatures for both RbV3O8 and TlV3O8. However, the differences in V···V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 140 K for TlV3O8 as compared to 125 K for RbV3O8. The results demonstrate the distinctive effects of stereochemically active lone pairs in modifying electronic structure near the Fermi level and for mediating superexchange interactions.

Linker-Assisted Assembly of Ligand-Bridged CdS/MoS2 Heterostructures: Tunable Light-Harvesting Properties and Ligand-Dependent Control of Charge-Transfer Dynamics and Photocatalytic Hydrogen Evolution.

We used linker-assisted assembly (LAA) to tether CdS quantum dots (QDs) to MoS2 nanosheets via L-cysteine (cys) or mercaptoalkanoic acids (MAAs) of varying lengths, yielding ligand-bridged CdS/MoS2 heterostructures for redox photocatalysis. LAA afforded precise control over the light-harvesting properties of QDs within heterostructures. Photoexcited CdS QDs transferred electrons to molecularly linked MoS2 nanosheets from both band-edge and trap states; the electron-transfer dynamics was tunable with the properties of bridging ligands. Rate constants of electron transfer, estimated from time-correlated single photon counting (TCSPC) measurements, ranged from (9.8 ± 3.8) × 106 s-1 for the extraction of electrons from trap states within heterostructures incorporating the longest MAAs to >5 × 109 s-1 for the extraction of electrons from band-edge or trap states in heterostructures with cys or 3-mercaptopropionic acid (3MPA) linkers. Ultrafast transient absorption measurements revealed that electrons were transferred within 0.5-2 ps or less for CdS-cys-MoS2 and CdS-3MPA-MoS2 heterostructures, corresponding to rate constants ≥5 × 109 s-1. Photoinduced CdS-to-MoS2 electron transfer could be exploited in photocatalytic hydrogen evolution reaction (HER) via the reduction of H+ to H2 in concert with the oxidation of lactic acid. CdS-L-MoS2-functionalized FTO electrodes promoted HER under oxidative conditions wherein H2 was evolved at a Pt counter electrode with Faradaic efficiencies of 90% or higher and under reductive conditions wherein H2 was evolved at the CdS-L-MoS2-heterostructure-functionalized working electrode with Faradaic efficiencies of 25-40%. Dispersed CdS-L-MoS2 heterostructures promoted photocatalytic HER (15.1 µmol h-1) under white-light illumination, whereas free cys-capped CdS QDs produced threefold less H2 and unfunctionalized MoS2 nanosheets produced no measurable H2. Charge separation across the CdS/MoS2 interface is thus pivotal for redox photocatalysis. Our results reveal that LAA affords tunability of the properties of constituent CdS QDs and MoS2 nanosheets and precise, programmable, ligand-dependent control over the assembly, interfacial structure, charge-transfer dynamics, and photocatalytic reactivity of CdS-L-MoS2 heterostructures.

Density functional theory and ab initio molecular dynamics reveal atomistic mechanisms for carbonate clumped isotope reordering.

Carbon (13C) and oxygen (18O) isotopes in carbonates form clumped isotope species inversely correlated with temperature, providing a valuable paleothermometer for sedimentary carbonates and fossils. However, this signal resets ("reorders") with increasing temperature after burial. Research on reordering kinetics has characterized reordering rates and hypothesized the effects of impurities and trapped water, but the atomistic mechanism remains obscure. This work studies carbonate-clumped isotope reordering in calcite via first-principles simulations. We developed an atomistic view of the isotope exchange reaction between carbonate pairs in calcite, discovering a preferred configuration and elucidating how Mg2+ substitution and Ca2+ vacancies lower the free energy of activation (ΔA‡) compared to pristine calcite. Regarding water-assisted isotopic exchange, the H+-O coordination distorts the transition state configuration and reduces ΔA‡. We proposed a water-mediated exchange mechanism showing the lowest ΔA‡ involving a reaction pathway with a hydroxylated four-coordinated carbon atom, confirming that internal water facilitates clumped isotope reordering.

Matrix transformation of lunar regolith and its use as a feedstock for additive manufacturing.

Building a sustainable human habitat on the Moon requires advances in excavation, paving, and additive manufacturing to construct landing pads, surface transportation arteries, resilient shelters, and scientific outposts. Construction of infrastructure elements on the lunar surface necessitates exploration of the interfacial reactivity of locally sourced regolith and the adaptation of Earth-based construction techniques. Various crosslinking frameworks and sintering methods have been proposed as a means of consolidating lunar regolith into load-bearing structures but each have challenges related to incomplete understanding of reaction chemistry, excessive thermal budgets, and lack of universal applicability to different mineral components of regolith. We describe here a versatile experimental and computational study of the consolidation of a regolith simulant through formation of siloxane networks enmeshing mineral particles by surface dissolution-precipitation and polycondensation reactions. Furthermore, by tailoring the rheological properties of the formulation an additive manufacturing feedstock can be developed for the construction of lunar infrastructure.

Chemistry-mechanics-geometry coupling in positive electrode materials: a scale-bridging perspective for mitigating degradation in lithium-ion batteries through materials design.

Despite their rapid emergence as the dominant paradigm for electrochemical energy storage, the full promise of lithium-ion batteries is yet to be fully realized, partly because of challenges in adequately resolving common degradation mechanisms. Positive electrodes of Li-ion batteries store ions in interstitial sites based on redox reactions throughout their interior volume. However, variations in the local concentration of inserted Li-ions and inhomogeneous intercalation-induced structural transformations beget substantial stress. Such stress can accumulate and ultimately engender substantial delamination and transgranular/intergranular fracture in typically brittle oxide materials upon continuous electrochemical cycling. This perspective highlights the coupling between electrochemistry, mechanics, and geometry spanning key electrochemical processes: surface reaction, solid-state diffusion, and phase nucleation/transformation in intercalating positive electrodes. In particular, we highlight recent findings on tunable material design parameters that can be used to modulate the kinetics and thermodynamics of intercalation phenomena, spanning the range from atomistic and crystallographic materials design principles (based on alloying, polymorphism, and pre-intercalation) to emergent mesoscale structuring of electrode architectures (through control of crystallite dimensions and geometry, curvature, and external strain). This framework enables intercalation chemistry design principles to be mapped to degradation phenomena based on consideration of mechanics coupling across decades of length scales. Scale-bridging characterization and modeling, along with materials design, holds promise for deciphering mechanistic understanding, modulating multiphysics couplings, and devising actionable strategies to substantially modify intercalation phase diagrams in a manner that unlocks greater useable capacity and enables alleviation of chemo-mechanical degradation mechanisms.

A reference-area-free strain mapping method using precession electron diffraction data.

In this work, we developed a method using precession electron diffraction data to map the residual elastic strain at the nano-scale. The diffraction pattern of each pixel was first collected and denoised. Template matching was then applied using the center spot as the mask to identify the positions of the diffraction disks. Statistics of distances between the selected diffracted disks enable the user to make an informed decision on the reference and to generate strain maps. Strain mapping on an unstrained single crystal sapphire shows the standard deviation of strain measurement is 0.5%. With this method, we were able to successfully measure and map the residual elastic strain in VO2 on sapphire and martensite in a Ni50.3Ti29.7Hf20 shape memory alloy. This approach does not require the user to select a "strain-free area" as a reference and can work on datasets even with the crystals oriented away from zone axes. This method is expected to provide a robust and more accessible alternative means of studying the residual strain of various material systems that complements the existing algorithms for strain mapping.

Tunnel-Structured ζ-V2O5 as a Redox-Active Insertion Host for Hybrid Capacitive Deionization.

Much of the earth's water has a salt content that is too high for human consumption or agricultural use. Enhanced oil recovery operations generate massive volumes of produced water waste with a high mineral content that can substantially exacerbate water distress. Current deionization techniques such as reverse osmosis function by removing the water (majority phase) from the salt (minority phase) and are thus exceedingly energy-intensive. Furthermore, these methods are limited in their ability to selectively extract high-value ions from produced water waste and brine streams. Hybrid capacitive deionization holds promise for enabling both desalination and resource recovery. In this work, we demonstrate the construction of a hybrid capacitive deionization cell that makes use of tunnel-structured ζ-V2O5 as a redox-active positive electrode material. By augmenting surface adsorption with Faradaic insertion processes, a 50% improvement in the ion removal capacity for K and Li ions is obtained as compared to a capacitive high-surface-area carbon electrode. The extracted ions are accommodated in surface sites and interstitial sites within the one-dimensional tunnel framework of ζ-V2O5. The kinetics of ion removal depend on the free energy of hydration, which governs the ease of desolvation at the electrode/electrolyte interface. The overall ion removal capacity additionally depends on the solid-state diffusion coefficient. ζ-V2O5 positive electrodes show substantial selectivity for Li+ removal from mixed flow streams and enrichment of the Li-ion concentration from produced water waste derived from the Permian Basin.

Harnessing the Metal-Insulator Transition of VO2 in Neuromorphic Computing.

Future-generation neuromorphic computing seeks to overcome the limitations of von Neumann architectures by colocating logic and memory functions, thereby emulating the function of neurons and synapses in the human brain. Despite remarkable demonstrations of high-fidelity neuronal emulation, the predictive design of neuromorphic circuits starting from knowledge of material transformations remains challenging. VO2 is an attractive candidate since it manifests a near-room-temperature, discontinuous, and hysteretic metal-insulator transition. The transition provides a nonlinear dynamical response to input signals, as needed to construct neuronal circuit elements. Strategies for tuning the transformation characteristics of VO2 based on modification of material properties, interfacial structure, and field couplings, are discussed. Dynamical modulation of transformation characteristics through in situ processing is discussed as a means of imbuing synaptic function. Mechanistic understanding of site-selective modification; external, epitaxial, and chemical strain; defect dynamics; and interfacial field coupling in modifying local atomistic structure, the implications therein for electronic structure, and ultimately, the tuning of transformation characteristics, is emphasized. Opportunities are highlighted for inverse design and for using design principles related to thermodynamics and kinetics of electronic transitions learned from VO2 to inform the design of new Mott materials, as well as to go beyond energy-efficient computation to manifest intelligence.

Toggling Stereochemical Activity through Interstitial Positioning of Cations between 2D V2O5 Double Layers.

The 5/6s2 lone-pair electrons of p-block cations in their lower oxidation states are a versatile electronic and geometric structure motif that can underpin lattice anharmonicity and often engender electronic and structural instabilities that underpin the function of active elements in nonlinear optics, thermochromics, thermoelectrics, neuromorphic computing, and photocatalysis. In contrast to periodic solids where lone-pair-bearing cations are part of the structural framework, installing lone-pair-bearing cations in the interstitial sites of intercalation hosts provides a means of a systematically modulating electronic structure through the choice of the group and the period of the inserted cation while preserving the overall framework connectivity. The extent of stereochemical activity and the energy positioning of lone-pair-derived mid-gap states depend on the cation identity, stoichiometry, and strength of anion hybridization. V2O5 polymorphs are versatile insertion hosts that can accommodate a broad range of s-, p-, and d-block cations. However, the insertion of lone-pair-bearing cations remains largely underexplored. In this article, we examine the implications of varying the 6s2 cations situated in interlayer sites between condensed [V4O10]n double layers. Systematic modulations of lattice distortions, electronic structure, and magnetic ordering are observed with increasing strength of stereochemical activity from group 12 to group 14 cations. We compare and contrast p-block-layered MxV2O5 (M = Hg, Tl, and Pb) compounds and map the significance of local off-centering arising from the stereochemical activity of lone-pair cations to the emergence of filled antibonding lone-pair 6s2-O 2p-hybridized mid-gap states mediated by second-order Jahn-Teller distortions. Crystallographic studies of cation coordination environments and the resulting modulation of V-V interactions have been used in conjunction with variable-energy hard X-ray photoelectron spectroscopy measurements, first-principles electronic structure calculations, and crystal orbital Hamilton population analyses to decipher the origins of stereochemical activity. Magnetic susceptibility measurements reveal antiferromagnetic signatures for all the three compounds. However, the differences in V-V interactions significantly affect the energy balance of the superexchange interactions, resulting in an ordering temperature of 160 and 260 K for Hg0.5V2O5 and δ-Tl0.5V2O5, respectively, as compared to 7 K for δ-Pb0.5V2O5. In δ-Pb0.5V2O5, the strong stereochemical activity of electron lone pairs and the resulting electrostatic repulsions enforce superlattice ordering, which strongly modifies the electronic localization patterns along the [V4O10] slabs, resulting in disrupted magnetic ordering and an anomalously low ordering temperature. The results demonstrate a versatile strategy for toggling the stereochemical activity of electron lone pairs to modify the electronic structure near the Fermi level and to mediate superexchange interactions.

Multivariate hyperspectral data analytics across length scales to probe compositional, phase, and strain heterogeneities in electrode materials.

The origins of performance degradation in batteries can be traced to atomistic phenomena, accumulated at mesoscale dimensions, and compounded up to the level of electrode architectures. Hyperspectral X-ray spectromicroscopy techniques allow for the mapping of compositional variations, and phase separation across length scales with high spatial and energy resolution. We demonstrate the design of workflows combining singular value decomposition, principal-component analysis, k-means clustering, and linear combination fitting, in conjunction with a curated spectral database, to develop high-accuracy quantitative compositional maps of the effective depth of discharge across individual positive electrode particles and ensembles of particles. Using curated reference spectra, accurate and quantitative mapping of inter- and intraparticle compositional heterogeneities, phase separation, and stress gradients is achieved for a canonical phase-transforming positive electrode material, α-V2O5. Phase maps from single-particle measurements are used to reconstruct directional stress profiles showcasing the distinctive insights accessible from a standards-informed application of high-dimensional chemical imaging.

Thermochromic Fenestration Elements Based on the Dispersion of Functionalized VO2 Nanocrystals within a Polyvinyl Butyral Laminate.

The energy required to heat, cool, and illuminate buildings continues to increase with growing urbanization, engendering a substantial global carbon footprint for the built environment. Passive modulation of the solar heat gain of buildings through the design of spectrally selective thermochromic fenestration elements holds promise for substantially alleviating energy consumed for climate control and lighting. The binary vanadium(IV) oxide VO2 manifests a robust metal-insulator transition that brings about a pronounced modulation of its near-infrared transmittance in response to thermal activation. As such, VO2 nanocrystals are potentially useful as the active elements of transparent thermochromic films and coatings. Practical applications in retrofitting existing buildings requires the design of workflows to embed thermochromic fillers within industrially viable resins. Here, we describe the dispersion of VO2 nanocrystals within a polyvinyl butyral laminate commonly used in the laminated glass industry as a result of its high optical clarity, toughness, ductility, and strong adhesion to glass. To form high-optical-clarity nanocomposite films, VO2 nanocrystals are encased in a silica shell and functionalized with 3-methacryloxypropyltrimethoxysilane, enabling excellent dispersion of the nanocrystals in PVB through the formation of siloxane linkages and miscibility of the methacrylate group with the random copolymer. Encapsulation, functionalization, and dispersion of the core-shell VO2@SiO2 nanocrystals mitigates both Mie scattering and light scattering from refractive index discontinuities. The nanocomposite laminates exhibit a 22.3% modulation of NIR transmittance with the functionalizing moiety engendering a 77% increase of visible light transmittance as compared to unfunctionalized core-shell particles. The functionalization scheme and workflow demonstrated, here, illustrates a viable approach for integrating thermochromic functionality within laminated glass used for retrofitting buildings.

Thiazole fused S,N-heteroacene step-ladder polymeric semiconductors for organic transistors.

Ladder-type thiazole-fused S,N-heteroacenes with an extended π-conjugation consisting of six (SN6-Tz) and nine (SN9-Tz) fused aromatic rings have been synthesized and fully characterized. To date, the synthesis of well-defined fused building blocks and polymers of π-conjugated organic compounds based on the thiazole moiety is a considerable synthetic challenge, due to the difficulty in their synthesis. Acceptor-donor building blocks M1 and M2 were successfully polymerized into ladder homopolymers P1-P2 and further copolymerized with a diketopyrrolopyrrole unit to afford step-ladder copolymer P3. The optical, electronic, and thermal properties, in addition to their charge transport behavior in organic thin-film transistors (OTFTs), were investigated. The results showed an interesting effect on the molecular arrangement of the thiazole-based ladder-type heteroacene in the crystal structure revealing skewed π-π-stacking, and expected to possess better p-type semiconducting performance. The polymers all possess good molecular weights and excellent thermal properties. All the polymer-based OTFT devices exhibit annealing temperature dependent performance, and among the polymers P3 exhibits the highest mobility of 0.05 cm2 V-1 s-1.

Emulating synaptic behavior in surface-functionalized MoS2 through modulation of interfacial charge transfer via external stimuli.

Neuromorphic computing requires materials able to yield electronic switching behavior in response to external stimuli. Transition-metal dichalcogenides surfaces covered by partial or full monolayers of molecular species have shown promise due to their potential for tunable interfacial charge transfer. Here, we demonstrate a class of molecules able to position MoS2 surfaces on the cusp of electronic instabilities. Density functional theory (DFT) calculations and ab initio molecular dynamics simulations are used to study the interaction of four reduced pyridinium-derived pi-conjugated molecules with the pristine basal planes of MoS2, by exploring the dynamical evolution of the system at room temperature with regards to the effective band gap, radius of gyration (rog), and charge transfer. Computed rog profiles show that low concentrations of small reduced methyl viologen molecules have high mobilities on top of the surface of the basal plane at room temperature leading to unstable surface deposition, whereas a full monolayer of larger fused-ring molecules deposited on the basal surface shows greater thermal stability. DFT analyses show these larger reduced pyridinium derivatives promote n-type doping on the basal plane due to a built-in electric field, which can be systematically tuned to induce a switching effect, opening and closing a bandgap and providing a fundamental means of driving electronic instabilities needed for emulating neuronal functionality.

Textured ceramic membranes for desilting and deoiling of produced water in the Permian Basin.

Oil production in the Permian Basin gives rise to large volumes of produced water contaminated by silt, emulsified oil, and additives used for enhanced oil recovery. There is intense interest in the design of membrane modules as sustainable alternatives for produced water treatment to enable the reuse of produced water for agricultural applications, injection into aquifers, and redeployment in oil recovery. Here, we report a hierarchically textured cement-based membrane exhibiting orthogonal wettability, specifically, superhydrophilic and underwater superoleophobic characteristics. The in situ formation of ettringite needles accompanied by embedding of glass spheres imbues multiscale texturation to stainless-steel mesh membranes, enabling the separation of silt and oil from produced water at high flux rates (1600 L h-1Û°m-2, at ca. 2.7 bar). Oil concentration is reduced as low as 1 ppb with an overall separation efficiency of 99.7% in single-pass filtration. The membranes show outstanding mechanical resilience and retention of performance across multiple cycles.

Type-II CuFe2O4/Graphitic Carbon Nitride Heterojunctions for High-Efficiency Photocatalytic and Electrocatalytic Hydrogen Generation.

Solar water splitting has emerged as an urgent imperative as hydrogen emerges as an increasingly important form of energy storage. g-C3N4 is an ideal candidate for photocatalytic water splitting as a result of the excellent alignment of its band edges with water redox potentials. To mitigate electron-hole recombination that has limited the performance of g-C3N4, we have developed a semiconductor heterostructure of g-C3N4 with CuFe2O4 nanoparticles (NPs) as a highly efficient photocatalyst. Visible-light-driven photocatalytic properties of CuFe2O4/g-C3N4 heterostructures with different CuFe2O4 loadings have been examined with two sacrificial agents. An up to 2.5-fold enhancement in catalytic efficiency is observed for CuFe2O4/g-C3N4 heterostructures over g-C3N4 nanosheets alone with the apparent quantum yield of H2 production approaching 25%. The improved photocatalytic activity of the heterostructures suggests that introducing CuFe2O4 NPs provides more active sites and reduces electron-hole recombination. The g-C3N4/CuFe2O4 heterostructures furthermore show enhanced electrocatalytic HER activity as compared to the individual components as a result of which by making heterostructures g-C3N4 with CuFe2O4 increased the active catalytic surface for the electrocatalytic water splitting reaction. The enhanced faradaic efficiency of the prepared heterostructures makes it a potential candidate for efficient hydrogen generation. Nevertheless, the designed heterostructure materials exhibited significant photo- and electrocatalytic activity toward the HER, which demonstrates a method for methodically enhancing catalytic performance by creating heterostructures with the best energetic offsets.

Decoupling the metal-insulator transition temperature and hysteresis of VO2 using Ge alloying and oxygen vacancies.

The metal-to-insulator transition of VO2 underpins applications in thermochromics, neuromorphic computing, and infrared vision. Ge alloying is shown to elevate the transition temperature by promoting V-V dimerization, thereby expanding the stability of the monoclinic phase to higher temperatures. By suppressing the propensity for oxygen vacancy formation, Ge alloying renders the hysteresis of the transition exquisitely sensitive to oxygen stoichiometry.

Cation reordering instead of phase transitions: Origins and implications of contrasting lithiation mechanisms in 1D ζ- and 2D α-V2O5.

Substantial improvements in cycle life, rate performance, accessible voltage, and reversible capacity are required to realize the promise of Li-ion batteries in full measure. Here, we have examined insertion electrodes of the same composition (V2O5) prepared according to the same electrode specifications and comprising particles with similar dimensions and geometries that differ only in terms of their atomic connectivity and crystal structure, specifically two-dimensional (2D) layered α-V2O5 that crystallizes in an orthorhombic space group and one-dimensional (1D) tunnel-structured ζ-V2O5 crystallized in a monoclinic space group. By using particles of similar dimensions, we have disentangled the role of specific structural motifs and atomistic diffusion pathways in affecting electrochemical performance by mapping the dynamical evolution of lithiation-induced structural modifications using ex situ scanning transmission X-ray microscopy, operando synchrotron X-ray diffraction measurements, and phase-field modeling. We find the operation of sharply divergent mechanisms to accommodate increasing concentrations of Li-ions: a series of distortive phase transformations that result in puckering and expansion of interlayer spacing in layered α-V2O5, as compared with cation reordering along interstitial sites in tunnel-structured ζ-V2O5 By alleviating distortive phase transformations, the ζ-V2O5 cathode shows reduced voltage hysteresis, increased Li-ion diffusivity, alleviation of stress gradients, and improved capacity retention. The findings demonstrate that alternative lithiation mechanisms can be accessed in metastable compounds by dint of their reconfigured atomic connectivity and can unlock substantially improved electrochemical performance not accessible in the thermodynamically stable phase.