Step engineering for nucleation and domain orientation control in WSe2 epitaxy on c-plane sapphire.

Epitaxial growth of two-dimensional transition metal dichalcogenides on sapphire has emerged as a promising route to wafer-scale single-crystal films. Steps on the sapphire act as sites for transition metal dichalcogenide nucleation and can impart a preferred domain orientation, resulting in a substantial reduction in mirror twins. Here we demonstrate control of both the nucleation site and unidirectional growth direction of WSe2 on c-plane sapphire by metal-organic chemical vapour deposition. The unidirectional orientation is found to be intimately tied to growth conditions via changes in the sapphire surface chemistry that control the step edge location of WSe2 nucleation, imparting either a 0° or 60° orientation relative to the underlying sapphire lattice. The results provide insight into the role of surface chemistry on transition metal dichalcogenide nucleation and domain alignment and demonstrate the ability to engineer domain orientation over wafer-scale substrates.

Toward a Mechanistic Understanding of the Formation of 2D-GaNx in Epitaxial Graphene.

Ultrathin 2D-GaNx can be formed by Ga intercalation into epitaxial graphene (EG) on SiC followed by nitridation in ammonia. Defects in the graphene provide routes for intercalation, but the nature and role of the defects have remained elusive. Here we examine the influence of graphene layer thickness and chemical functionalization on Ga intercalation and 2D-GaNx formation using a combination of experimental and theoretical studies. Thin buffer layer regions of graphene near steps on SiC readily undergo oxygen functionalization when exposed to air or a He/O2 plasma in contrast to thicker regions which are not chemically modified. Oxygen functionalization is found to inhibit Ga intercalation leading to accumulation of Ga droplets on the surface. In contrast, Ga readily intercalates between EG and SiC in the thicker graphene regions that do not contain oxygen. When NH3 annealing is carried out immediately after Ga exposure, 2D-GaNx formation is observed only in the oxygen-functionalized regions, and Ga intercalated under thicker nonfunctionalized graphene does not convert to GaNx. Density functional theory calculations demonstrate that oxygen functionalization of graphene alters the binding energy of Ga and NH3 species to the graphene surface. The presence of hydroxyl groups on graphene inhibits binding of Ga to the surface; however, it enhances the chemical reactivity of the graphene surface to NH3 which, in turn, enhances Ga binding and facilitates the formation of 2D-GaNx. By modifying the EG process to produce oxygen-functionalized buffer layer graphene, uniformly intercalated 2D-GaNx is obtained across the entire substrate surface.

Substrate Modification during Chemical Vapor Deposition of hBN on Sapphire.

A comparison of hexagonal boron nitride (hBN) layers grown by chemical vapor deposition on C-plane (0001) versus A-plane (112̅0) sapphire (α-Al2O3) substrate is reported. The high deposition temperature (>1200 °C) and hydrogen ambient used for hBN deposition on sapphire substantially alters the C-plane sapphire surface chemistry and leaves the top layer(s) oxygen deficient. The resulting surface morphology due to H2 etching of C-plane sapphire is inhomogeneous with increased surface roughness which causes non-uniform residual stress in the deposited hBN film. In contrast to C-plane, the A-plane of sapphire does not alter substantially under a similar high temperature H2 environment, thus providing a more stable alternative substrate for high quality hBN growth. The E2g Raman mode full width at half-maximum (FWHM) for hBN deposited on C-plane sapphire is 24.5 ± 2.1 cm-1 while for hBN on A-plane sapphire is 24.5 ± 0.7 cm-1. The lesser FWHM standard deviation on A-plane sapphire indicates uniform stress distribution across the film due to reduced undulations on the surface. The photoluminescence spectra of the hBN films at 300 and 3 K, obtained on C-plane and A-plane sapphire exhibit similar characteristics with peaks at 4.1 and 5.3 eV reported to be signature peaks associated with defects for hBN films deposited under lower V/III ratios. The dielectric breakdown field of hBN deposited on A-plane sapphire was measured to be 5 MV cm-1, agreeing well with reports on mechanically exfoliated hBN flakes. Thus, under the typical growth conditions required for high crystalline quality hBN growth, A-plane sapphire provides a more chemically stable substrate.

Wafer-Scale Epitaxial Growth of Unidirectional WS2 Monolayers on Sapphire.

Realization of wafer-scale single-crystal films of transition metal dichalcogenides (TMDs) such as WS2 requires epitaxial growth and coalescence of oriented domains to form a continuous monolayer. The domains must be oriented in the same crystallographic direction on the substrate to inhibit the formation of inversion domain boundaries (IDBs), which are a common feature of layered chalcogenides. Here we demonstrate fully coalesced unidirectional WS2 monolayers on 2 in. diameter c-plane sapphire by metalorganic chemical vapor deposition using a multistep growth process to achieve epitaxial WS2 monolayers with low in-plane rotational twist (0.09°). Transmission electron microscopy analysis reveals that the WS2 monolayers are largely free of IDBs but instead have translational boundaries that arise when WS2 domains with slightly offset lattices merge together. By regulating the monolayer growth rate, the density of translational boundaries and bilayer coverage were significantly reduced. The unidirectional orientation of domains is attributed to the presence of steps on the sapphire surface coupled with growth conditions that promote surface diffusion, lateral domain growth, and coalescence while preserving the aligned domain structure. The transferred WS2 monolayers show neutral and charged exciton emission at 80 K with negligible defect-related luminescence. Back-gated WS2 field effect transistors exhibited an ION/OFF of ∼107 and mobility of 16 cm2/(V s). The results demonstrate the potential of achieving wafer-scale TMD monolayers free of inversion domains with properties approaching those of exfoliated flakes.

Scalable Substitutional Re-Doping and its Impact on the Optical and Electronic Properties of Tungsten Diselenide.

Reliable, controlled doping of 2D transition metal dichalcogenides will enable the realization of next-generation electronic, logic-memory, and magnetic devices based on these materials. However, to date, accurate control over dopant concentration and scalability of the process remains a challenge. Here, a systematic study of scalable in situ doping of fully coalesced 2D WSe2 films with Re atoms via metal-organic chemical vapor deposition is reported. Dopant concentrations are uniformly distributed over the substrate surface, with precisely controlled concentrations down to <0.001% Re achieved by tuning the precursor partial pressure. Moreover, the impact of doping on morphological, chemical, optical, and electronic properties of WSe2 is elucidated with detailed experimental and theoretical examinations, confirming that the substitutional doping of Re at the W site leads to n-type behavior of WSe2 . Transport characteristics of fabricated back-gated field-effect-transistors are directly correlated to the dopant concentration, with degrading device performances for doping concentrations exceeding 1% of Re. The study demonstrates a viable approach to introducing true dopant-level impurities with high precision, which can be scaled up to batch production for applications beyond digital electronics.

Defect-Controlled Nucleation and Orientation of WSe2 on hBN: A Route to Single-Crystal Epitaxial Monolayers.

A defect-controlled approach for the nucleation and epitaxial growth of WSe2 on hBN is demonstrated. The WSe2 domains exhibit a preferred orientation of over 95%, leading to a reduced density of inversion domain boundaries (IDBs) upon coalescence. First-principles calculations and experimental studies as a function of growth conditions and substrate pretreatment confirm that WSe2 nucleation density and orientation are controlled by the hBN surface defect density rather than thermodynamic factors. Detailed transmission electron microscopy analysis provides support for the role of single-atom vacancies on the hBN surface that trap W atoms and break surface symmetry leading to a reduced formation energy for one orientation of WSe2 domains. Through careful control of nucleation and extended lateral growth time, fully coalesced WSe2 monolayer films on hBN were achieved. Low-temperature photoluminescence (PL) measurements and transport measurements of back-gated field-effect transistor devices fabricated on WSe2/hBN films show improved optical and electrical properties compared to films grown on sapphire under similar conditions. Our results reveal an important nucleation mechanism for the epitaxial growth of van der Waals heterostructures and demonstrate hBN as a superior substrate for single-crystal transition-metal dichalcogenide (TMD) films, resulting in a reduced density of IDBs and improved properties. The results motivate further efforts focused on the development of single crystal hBN substrates and epilayers for synthesis of wafer-scale single crystal TMD films.

Different shades of cholesterol: Gold nanoparticles supported on MoS2 nanoribbons for enhanced colorimetric sensing of free cholesterol.

In the present study, we manifest that traditionally used gold nanoparticles when supported on molybdenum disulfide nanoribbons matrix (MoS2 NRs-Au NPs) show synergistically enhanced intrinsic peroxidase like catalytic activity and can catalyze the oxidation of 3,3',5,5' tetramethyl benzidine by H2O2 to produce a highly sensitive blue shade product depending on level of free cholesterol, when tested on complex system of human serum. Further the system attests appreciable kinetics, owing to Km value as low as 0.015 mM and better loading capacity (Vmax=6.7×10(-6) M s(-1)). Additionally, the proposed system is stable for weeks with ability to perform appreciably in wide pH (3-6) and temperature range (25-60 °C). Utilizing this potential, the present work proposes a cholesterol detection color wheel which is used along with cost effective cholesterol detection strips fabricated out of proposed MoS2 NRs-Au NPs system for quick and reliable detection of free cholesterol using unaided eye.