Electron energy-loss spectroscopic tomography of FexCo(3-x)O4 impregnated Co3O4 mesoporous particles: unraveling the chemical information in three dimensions.

Electron energy-loss spectroscopy-spectrum image (EELS-SI) tomography is a powerful tool to investigate the three dimensional chemical configuration in nanostructures. Here, we demonstrate, for the first time, the possibility to characterize the spatial distribution of Fe and Co cations in a complex FexCo(3-x)O4/Co3O4 ordered mesoporous system. This hybrid material is relevant because of the ferrimagnetic/antiferromagnetic coupling and high surface area. We unambiguously prove that the EELS-SI tomography shows a sufficiently high resolution to simultaneously unravel the pore structure and the chemical signal.

Electrochemically synthesized amorphous and crystalline nanowires: dissimilar nanomechanical behavior in comparison with homologous flat films.

The effects of constrained sample dimensions on the mechanical behavior of crystalline materials have been extensively investigated. However, there is no clear understanding of these effects in nano-sized amorphous samples. Herein, nanoindentation together with finite element simulations are used to compare the properties of crystalline and glassy CoNi(Re)P electrodeposited nanowires (ϕ ≈ 100 nm) with films (3 µm thick) of analogous composition and structure. The results reveal that amorphous nanowires exhibit a larger hardness, lower Young's modulus and higher plasticity index than glassy films. Conversely, the very large hardness and higher Young's modulus of crystalline nanowires are accompanied by a decrease in plasticity with respect to the homologous crystalline films. Remarkably, proper interpretation of the mechanical properties of the nanowires requires taking the curved geometry of the indented surface and sink-in effects into account. These findings are of high relevance for optimizing the performance of new, mechanically-robust, nanoscale materials for increasingly complex miniaturized devices.

Nanostructured Ti-Zr-Pd-Si-(Nb) bulk metallic composites: Novel biocompatible materials with superior mechanical strength and elastic recovery.

The microstructure, mechanical behaviour, and biocompatibility (cell culture, morphology, and cell adhesion) of nanostructured Ti45 Zr15 Pd35- x Si5 Nbx with x = 0, 5 (at. %) alloys, synthesized by arc melting and subsequent Cu mould suction casting, in the form of rods with 3 mm in diameter, are investigated. Both Ti-Zr-Pd-Si-(Nb) materials show a multi-phase (composite-like) microstructure. The main phase is cubic ß-Ti phase (Im3m) but hexagonal α-Ti (P63/mmc), cubic TiPd (Pm3m), cubic PdZr (Fm3m), and hexagonal (Ti, Zr)5 Si3 (P63/mmc) phases are also present. Nanoindentation experiments show that the Ti45 Zr15 Pd30 Si5 Nb5 sample exhibits lower Young's modulus than Ti45 Zr15 Pd35 Si5 . Conversely, Ti45 Zr15 Pd35 Si5 is mechanically harder. Actually, both alloys exhibit larger values of hardness when compared with commercial Ti-40Nb, (HTi-Zr-Pd-Si ≈ 14 GPa, HTi-Zr-Pd-Si-Nb ≈ 10 GPa and HTi-40Nb ≈ 2.7 GPa). Concerning the biological behaviour, preliminary results of cell viability performed on several Ti-Zr-Pd-Si-(Nb) discs indicate that the number of live cells is superior to 94% in both cases. The studied Ti-Zr-Pd-Si-(Nb) bulk metallic system is thus interesting for biomedical applications because of the outstanding mechanical properties (relatively low Young's modulus combined with large hardness), together with the excellent biocompatibility.

Electrodeposition of magnetic, superhydrophobic, non-stick, two-phase Cu-Ni foam films and their enhanced performance for hydrogen evolution reaction in alkaline water media.

Two-phase Cu-Ni magnetic metallic foams (MMFs) with tunable composition have been prepared by electrodeposition taking advantage of hydrogen co-evolution as a source of porosity. It is observed that Ni tends to deposit inside the porous network defined by the Cu building blocks. Contact angle measurements reveal that the prepared porous films show a remarkable superhydrophobicity (contact angle values larger than 150°) and a non-sticking property to aqueous droplets. This behavior is predominately ascribed to the morphology of the films - hierarchical micro/nanoporosity, wall thickness, and spatial arrangement. The electrochemical activity and stability towards hydrogen evolution reaction of the Cu-Ni MMFs has been investigated by cyclic voltammetry in 1 M KOH at 298 K, and the optimal Ni content is found to be 15 at%. Furthermore, all the foam-like films exhibit ferromagnetic behaviour due to the presence of the Ni-rich phase, with coercivity values ranging from 114 Oe to 300 Oe. From the technological point of view, the Cu-Ni MMFs are promising candidates for magnetically-actuated micro/nano-electromechanical systems (MEMS/NEMS) and micro/nanorobotic platforms with a large surface-area to volume ratio or in magnetic sensors or separators.

Dasatinib worsens the effect of cetuximab in combination with fractionated radiotherapy in FaDu- and A431-derived xenografted tumours.

BACKGROUND: Cetuximab is often combined with radiotherapy in advanced SCCHN. Alternative routes bypassing inhibition of EGFR with cetuximab may overshadow the efficacy of this combination. We undertook this study to investigate a possible role of dasatinib in this scenario. METHODS: The SCC5, SCC25, SCC29, FaDu and A431 cell lines were assessed in vitro for cell proliferation under cetuximab and dasatinib treatments. In FaDu and A431 cells, dasatinib plus cetuximab resulted in higher proliferation than cetuximab alone. Then, FaDu and A431 cells were implanted into subcutaneous tissue of athymic mice that were irradiated with 30 Gy in 10 fractions over 2 weeks, and treated with cetuximab and dasatinib. Tumour growth, DNA synthesis and angiogenesis were determined. The EGFR, RAS-GTP activity, phosphorylated AKT, ERK1/2, SRC protein levels and VEGF secretion were determined in vitro. RESULTS: The addition of dasatinib to cetuximab and radiotherapy increased tumour growth, DNA synthesis and angiogenesis that were associated with RAS, AKT and ERK1/2 activation, and SRC inhibition in FaDu and A431 cells. CONCLUSIONS: In xenografts derived from these two cell lines, dasatinib did not improve the efficacy of cetuximab combined with radiotherapy. On the contrary, it worsened tumour control achieved by the combination of these two treatments.

In vitro biocompatibility assessment of Ti40Cu38Zr10Pd12 bulk metallic glass.

The use of biocompatible materials has attained an increasing importance for tissue regeneration and transplantation. The excellent mechanical and corrosion properties of Ti40Cu38Zr10Pd12 bulk metallic glass (BMG) turn it into a potential candidate for its use in orthopaedic implants. Before being considered as a biomaterial, some biological parameters must be taken into account. In this study,mouse preosteoblasts were cultured in the presence or absence of the alloy at different times (24 h, 7 and 21 days) and no differences in cell viability were detected.Moreover, cells were able to adhere to the alloy surface by establishing focal contacts, and displayed a flattened polygonal morphology. After 14 days in culture, differentiation into osteoblasts was observed. Besides, the amount of Cu ions released and their potential toxic effects were analyzed, showing that the amount of Cu released did not increase cell death. Finally, the low levels of inflammatory cytokines secreted by THP-1 differentiated macrophages exposed to the alloy suggest the absence of an immunogenic response to the alloy. In conclusion, in vitro studies indicate that the Ti40Cu38Zr10Pd12 BMG could be considered as a biomaterial to be used in orthopaedic implants.

Robust antiferromagnetic coupling in hard-soft bi-magnetic core/shell nanoparticles.

The growing miniaturization demand of magnetic devices is fuelling the recent interest in bi-magnetic nanoparticles as ultimate small components. One of the main goals has been to reproduce practical magnetic properties observed so far in layered systems. In this context, although useful effects such as exchange bias or spring magnets have been demonstrated in core/shell nanoparticles, other interesting key properties for devices remain elusive. Here we show a robust antiferromagnetic (AFM) coupling in core/shell nanoparticles which, in turn, leads to the foremost elucidation of positive exchange bias in bi-magnetic hard-soft systems and the remarkable regulation of the resonance field and amplitude. The AFM coupling in iron oxide-manganese oxide based, soft/hard and hard/soft, core/shell nanoparticles is demonstrated by magnetometry, ferromagnetic resonance and X-ray magnetic circular dichroism. Monte Carlo simulations prove the consistency of the AFM coupling. This unique coupling could give rise to more advanced applications of bi-magnetic core/shell nanoparticles.

Validación de un cuestionario de conocimientos sobre la hipertensión / Validation of a hypertension knowledge questionnaire

INTRODUCCIÓN: La hipertensión arterial es una enfermedad crónica, siendo la principal desencadenante de las enfermedades cardiovasculares. Las intervenciones educativas destinadas a aumentar sus conocimientos pueden contribuir a que los pacientes hipertensos cambien los hábitos de vida poco saludables y a optimizar el cumplimiento terapéutico, favoreciendo un mejor control de la presión arterial. Para ello es necesario contar con un instrumento fiable con el que poder evaluar la eficacia de estas intervenciones. Objetivo Validar un cuestionario de conocimientos sobre la hipertensión (CSH) en castellano para evaluar el conocimiento y la comprensión que tienen los pacientes en este contexto. Material y métodos1) Adaptación del cuestionario existente. 2) Grupos de discusión para unificar criterios y consulta con expertos. 3) Prueba piloto de la comprensión del cuestionario. 4) Fiabilidad a través de la consistencia interna (alfa de Cronbach) y la sensibilidad al cambio (test de McNemar). Resultado Cuestionario definitivo desarrollado en 9 bloques que incluyen conocimientos sobre la hipertensión, los factores de riesgo asociados a la misma, los riesgos de la hipertensión, la dieta, el ejercicio y la medicación. Participaron 60 pacientes, 30 personas de centros de atención primaria y 30 de centros especializados. La edad media fue de 60 ańos; el 57% (n = 34) fueron mujeres. El alfa de Cronbach fue de 0,799.ConclusiónEl cuestionario desarrollado en este estudio es una herramienta fiable y fácil para evaluar el nivel de conocimientos sobre la hipertensión de los pacientes hipertensos, siendo especialmente útil para evaluar la eficacia de la educación terapéutica

INTRODUCTION: Hypertension is a chronic disorder and is the main cause of cardiovascular disease. Educational interventions designed to increase knowledge may help hypertensive patients to change unhealthy lifestyles and optimize treatment adherence, thus facilitating better blood pressure control. Consequently, a reliable tool is required to evaluate the effectiveness of theseinterventions. OBJECTIVE: To validate a hypertension knowledge questionnaire in Spanish to assess patients 'knowledge and understanding of this disorder. MATERIAL AND METHODS: 1) Adaptation of an existing questionnaire. 2) Focus groups to unify criteria and consultation with experts. 3) Pilot test to evaluate comprehension of the questionnaire. 4) Reliability through internal consistency (Cronbach's alpha) and sensitivity to change(McNemar test).RESULTS: A final questionnaire was developed in 9 blocks, which included knowledge of hypertension, associated risk factors, risks of hypertension, diet, exercise, and medication. Sixty patients participated: 30 were from primary care centers and the remaining 30 were from specialized centers. The mean age of the participants was 60 years, and 57% (n = 34) were women. Cronbach's alpha was 0.799. CONCLUSION: The questionnaire developed in this study is a reliable and easily applied tool to assess knowledge about hypertension in hypertensive patients. This questionnaire is especially useful to evaluate the effectiveness of therapeutic patient education

White-light photoluminescence and photoactivation in cadmium sulfide embedded in mesoporous silicon dioxide templates studied by confocal laser scanning microscopy.

SBA-15 and SBA-16 silica templates have been infiltrated with CdS by means of nanocasting using a hybrid precursor. The morphology and structure of both the SiO2@CdS nanocomposites and the silica-free CdS replicas have been characterized. The three-dimensional nanocrystalline CdS networks embedded in SBA-15 and SBA-16 silica templates exhibit broad photoluminescence (PL) spectra over the entire visible range, together with enhanced PL intensity compared to silica-free CdS replicas. These effects result from the role silica plays in passivating the surface of the CdS mesostructures. Furthermore, photoactivation is eventually observed during continuous illumination because of both structural and chemical surface modifications. Owing to this combination of properties, these materials could be appealing for solid-state lighting, where ultra-bright near-white PL emission is indispensable.

Eosinofilia masiva en paciente oncohematológico / Massive eosinophilia in an oncology/haematology patient

No disponible

Development and characterization of an isogenic cell line with a radioresistant phenotype

INTRODUCTION: Radiation resistance is a major cause of death in cancer patients. Cancer cells react during radiotherapy by re-programming specific cell functions that may confer resistance to radiation. The understanding of this complex process is hindered due to the lack of appropriate study models. We describe an experimental development of a radioresistant isogenic cancer cell line, and its molecular characterization. MATERIALS AND METHODS: A431-cultured cells were irradiated for 7 month until 85 Gy. Then, a selected single cell was left to grow as stable A431-R cell line. Clonogenic assay was used to determine cell survival, the α and β parameters of the LQ model, and the mean inactivation dose. The DNA repair ability of cells was evaluated by pulsed-field electrophoresis method. Differential effect of fractionated radiation was ultimately tested in xenografts. Furthermore, we used a wound healing assay, Western blot for EGFR, AKT and ERK1/2 and ELISA test for vascular endothelial growth factor (VEGF) secretion. Finally we explored CD44 marker and cell cycle distribution. RESULTS: The established A431-R cell line showed radiation resistance in clonogenic assays, repair of radiation-induced DNA fragmentation and xenografted tumours. The radiation resistance was associated with in vitro higher cell growth and migration, increased levels of former oncoproteins, and secretion of VEGF. CONCLUSIONS: In this model, the emergence of radiation resistance was associated with the acquisition of biological traits that support more aggressive behaviour of cancer cells. We have generated a model that will be useful for mechanistic studies and development of rational treatments against radiation resistance in cancer (AU)

On the biodegradability, mechanical behavior, and cytocompatibility of amorphous Mg72 Zn23 Ca5 and crystalline Mg70 Zn23 Ca5 Pd2 alloys as temporary implant materials.

The evolution of microstructure and mechanical properties of almost fully amorphous Mg(72) Zn(23) Ca(5) and crystalline Mg(70) Zn(23) Ca(5) Pd(2) alloys during immersion in Hank's balanced salt solution (HBSS), as well as their cytocompatibility, are investigated in order to assess the feasibility of both materials as biodegradable implants. Though the crystalline Mg(70) Zn(23) Ca(5) Pd(2) sample shows lower wettability and more positive corrosion potential, this sample degrades much faster upon incubation in HBSS as a consequence of the formation of micro-galvanic couples between the nobler Pd-rich dendrites and the surrounding phases. After 22-h immersion, the concentration of Mg ions in the HBSS medium containing the Mg(70) Zn(23) Ca(5) Pd(2) sample is six times larger than for Mg(72) Zn(23) Ca(5) . Due to the Zn enrichment and the incipient porosity, the mechanical properties of the Mg(72) Zn(23) Ca(5) sample improve within the first stages of biodegradation (i.e., hardness increases while the Young's modulus decreases, thus rendering an enhanced wear resistance). Cytocompatibility studies reveal that neither Mg(72) Zn(23) Ca(5) nor Mg(70) Zn(23) Ca(5) Pd(2) are cytotoxic, although preosteoblast cell adhesion is to some extent precluded, particularly onto the surface of Mg(70) Zn(23) Ca(5) Pd(2) , because of the relatively high hydrophobicity. Because of their outstanding properties and their time-evolution, the use of the Pd-free alloy in temporary implants such as screws, stents, and sutures is envisioned.

Strongly exchange coupled inverse ferrimagnetic soft/hard, Mn(x)Fe(3-x)O4/Fe(x)Mn(3-x)O4, core/shell heterostructured nanoparticles.

Inverted soft/hard, in contrast to conventional hard/soft, bi-magnetic core/shell nanoparticles of Mn(x)Fe(3-x)O(4)/Fe(x)Mn(3-x)O(4) with two different core sizes (7.5 and 11.5 nm) and fixed shell thickness (∼0.6 nm) have been synthesized. The structural characterization suggests that the particles have an interface with a graded composition. The magnetic characterization confirms the inverted soft/hard structure and evidences a strong exchange coupling between the core and the shell. Moreover, larger soft core sizes exhibit smaller coercivities and loop shifts, but larger blocking temperatures, as expected from spring-magnet or graded anisotropy structures. The results indicate that, similar to thin film systems, the magnetic properties of soft/hard core/shell nanoparticles can be fine tuned to match specific applications.

Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg-Zn-Ca alloys through Pd-alloying.

The influence of partial substitution of Mg by Pd on the microstructure, mechanical properties and corrosion behaviour of Mg(72-x)Zn(23)Ca(5)Pd(x) (x=0, 2 and 6 at.%) alloys, synthesized by copper mould casting, is investigated. While the Mg(72)Zn(23)Ca(5) alloy is mainly amorphous, the addition of Pd decreases the glass-forming ability, thus favouring the formation of crystalline phases. From a mechanical viewpoint, the hardness increases with the addition of Pd, from 2.71 GPa for x=0 to 3.9 GPa for x=6, mainly due to the formation of high-strength phases. In turn, the wear resistance is maximized for an intermediate Pd content (i.e., Mg(70)Zn(23)Ca(5)Pd(2)). Corrosion tests in a simulated body fluid (Hank's solution) indicate that Pd causes a shift in the corrosion potential towards more positive values, thus delaying the biodegradability of this alloy. Moreover, since the cytotoxic studies with mouse preosteoblasts do not show dead cells after culturing for 27 h, these alloys are potential candidates to be used as biomaterials.

Distinguishing the core from the shell in MnO(x)/MnO(y) and FeO(x)/MnO(x) core/shell nanoparticles through quantitative electron energy loss spectroscopy (EELS) analysis.

The structural and chemical characterization of inverted bi-magnetic MnO(x)(antiferromagnetic)/MnO(y)(ferrimagnetic) and FeO(x)(soft-ferrimagnetic)/MnO(x)(hard-ferrimagnetic) core/shell nanoparticles has been carried out by means of scanning transmission electron microscopy with electron energy loss spectroscopy analysis, (S)TEM-EELS. Quantitative EELS was applied to assess the local composition of the nanoparticles by evaluating the local Mn oxidation state based on the Mn L3/L2 peak intensity ratio and the Mn L3 peak onset. The analysis allows to unambiguously distinguish the core from the shell and to determine the nature of the involved manganese oxides in both cases. The results evidence that the structure of the nanoparticles is, in fact, more complex than the one designed by the synthesis parameters.

Enhanced mechanical properties and in vitro corrosion behavior of amorphous and devitrified Ti40Zr10Cu38Pd12 metallic glass.

The effects of annealing treatments on the microstructure, elastic/mechanical properties, wear resistance and corrosion behavior of rod-shaped Ti40Zr10Cu38Pd12 bulk glassy alloys, synthesized by copper mold casting, are investigated. Formation of ultrafine crystals embedded in an amorphous matrix is observed for intermediate annealing temperatures, whereas a fully crystalline microstructure develops after heating to sufficiently high temperatures. The glassy alloy exhibits large hardness, relatively low Young's modulus, good wear resistance and excellent corrosion behavior. Nanoindentation measurements reveal that the sample annealed in the supercooled liquid region exhibits a hardness value of 9.4 GPa, which is 20% larger than in the completely amorphous state and much larger than the hardness of commercial Ti-6Al-4V alloy. The Young's modulus of the as-cast alloy (around 100 GPa, as determined from acoustic measurements) increases only slightly during partial devitrification. Finally, the anticorrosion performance of the Ti40Zr10Cu38Pd12 alloy in Hank's solution has been shown to ameliorate as crystallization proceeds and is roughly as good as in the commercial Ti-6Al-4V alloy. The outstanding mechanical and corrosion properties of the Ti40Zr10Cu38Pd12 alloy, both in amorphous and crystalline states, are appealing for its use in biomedical applications.

Analysis of the effect of the bovine adenosine triphosphate-binding cassette transporter G2 single nucleotide polymorphism Y581S on transcellular transport of veterinary drugs using new cell culture models.

In commercial dairy production, the risk of drug residues and environmental pollutants in milk from ruminants has become an outstanding problem. One of the main determinants of active drug secretion into milk is the ATP-binding cassette transporter G2/breast cancer resistance protein (ABCG2/BCRP). It is located in several organs associated with drug absorption, metabolism, and excretion, and its expression is highly induced during lactation in the mammary gland of ruminants, mice, and humans. As a consequence, potential contamination of milk could expose suckling infants to xenotoxins. In cows, a SNP for this protein affecting quality and quantity of milk production has been described previously (Y581S). In this study, our main purpose was to determine whether this polymorphism has an effect on transcellular transport of veterinary drugs because this could alter substrate pharmacokinetics and milk residues. We stably expressed the wild-type bovine ABCG2 and the Y581S variant in Madin-Darby canine kidney epithelial cells (MDCKII) and MEF3.8 cell lines generating cell models in which the functionality of the bovine transporter could be addressed. Functional studies confirmed the greater functional activity in mitoxantrone accumulation assays for the Y581S variant with a greater relative V(MAX) value (P = 0.040) and showed for the first time that the Y581S variant presents greater transcellular transport of the model ABCG2 substrate nitrofurantoin (P = 0.024) and of 3 veterinary antibiotics, the fluoroquinolone agents enrofloxacin (P = 0.035), danofloxacin (P = 0.001), and difloxacin (P = 0.008), identified as new substrates of the bovine ABCG2. In addition, the inhibitory effect of the macrocyclic lactone ivermectin on the activity of wild-type bovine ABCG2 and the Y581S variant was also confirmed, showing a greater inhibitory potency on the wild-type protein at all the concentrations tested (5 µM, P = 0.017; 10 µM, P = 0.001; 25 µM, P = 0.008; and 50 µM, P = 0.003). Differential transport activity depending on the genotype together with the differential inhibition pattern might have clinical consequences, including changes in substrate pharmacokinetics (and subsequently pharmacodynamics) and more specifically, changes in secretion of ABCG2 substrates into milk, potentially implying important consequences to veterinary therapeutics.

Structural and magnetic characterization of batch-fabricated nickel encapsulated multi-walled carbon nanotubes.

We report on the growth and fabrication of Ni-filled multi-walled carbon nanotubes (Ni-MWNTs) with an average diameter of 115 nm and variable length of 400 nm-1 µm. The Ni-MWNTs were grown using template-assisted electrodeposition and low pressure chemical vapor deposition (LPCVD) techniques. Anodized alumina oxide (AAO) templates were fabricated on Si using a current controlled process. This was followed by the electrodeposition of Ni nanowires (NWs) using galvanostatic pulsed current (PC) electrodeposition. Ni NWs served as the catalyst to grow Ni-MWNTs in an atmosphere of H2/C2H2 at a temperature of 700 °C. Time dependent depositions were carried out to understand the diffusion and growth mechanism of Ni-MWNTs. Characterization was carried out using scanning electron microscopy (SEM), focused ion beam (FIB) milling, transmission electron microscopy (TEM), Raman spectroscopy and energy dispersive x-ray spectroscopy (EDX). TEM analysis revealed that the Ni nanowires possess a fcc structure. To understand the effects of the electrodeposition parameters, and also the effects of the high temperatures encountered during MWNT growth on the magnetic properties of the Ni-MWNTs, vibrating sample magnetometer (VSM) measurements were performed. The template-based fabrication method is repeatable, efficient, enables batch fabrication and provides good control on the dimensions of the Ni-MWNTs.

Magnetic proximity effect features in antiferromagnetic/ferrimagnetic core-shell nanoparticles.

A study of "inverted" core-shell, MnO/gamma-Mn(2)O(3), nanoparticles is presented. Crystal and magnetic structures and characteristic sizes have been determined by neutron diffraction for the antiferromagnetic core (MnO) and the ferrimagnetic shell (gamma-Mn(2)O(3)). Remarkably, while the MnO core is found to have a T_{N} not far from its bulk value, the magnetic order of the gamma-Mn(2)O(3) shell is stable far above T_{C}, exhibiting two characteristic temperatures, at T approximately 40 K [T_{C}(gamma-Mn(2)O(3))] and at T approximately 120 K [ approximately T_{N}(MnO)]. Magnetization measurements are consistent with these results. The stabilization of the shell moment up to T_{N} of the core can be tentatively attributed to core-shell exchange interactions, hinting at a possible magnetic proximity effect.