Subretinal and Retrolaminar Migration of Intraocular Silicone Oil Detected on CT.

BACKGROUND AND PURPOSE: Intraocular silicone oil injection has been used to treat complicated retinal detachments, and recently its retrolaminar and intracranial migration has been reported. The purpose of this study was to document the prevalence of posterior migration of intraocular silicone oil on head CT and describe the clinical and radiologic findings. MATERIALS AND METHODS: This retrospective study included 57 patients with intraocular silicone oil injection who underwent unenhanced head CT between November 2008 and July 2018. All images were visually evaluated for subretinal and retrolaminar migration of intraocular silicone oil involving the anterior visual pathway (optic nerve, optic chiasm, and optic tract) and the ventricular system. Attenuation values of those structures were measured and compared with those of the contralateral or adjacent normal structures. RESULTS: We detected subretinal and retrolaminar silicone oil migration in 7 of the 57 patients (12%), noting silicone oil at the optic nerve head (n = 2), retrolaminar optic nerve (n = 5), optic chiasm (n = 3), optic tract (n = 3), and in the lateral ventricles (n = 1). Attenuation values of the structures with silicone oil migration were significantly higher than those of the control regions (optic nerve head, 69.2 ± 12.4 vs 29.8 ± 10.2 HU, P < .001; retrolaminar optic nerve, 59.9 ± 11.6 vs 30.9 ± 8.6 HU, P < .001; optic chiasm, 74.2 ± 11.0 vs 25.6 ± 6.9 HU, P < .001; optic tract, 70.1 ± 4.7 vs 28.7 ± 7.2 HU, P < .001). No significant ophthalmic or neurologic complications were documented in the patients with silicone oil migration. CONCLUSIONS: Subretinal and retrolaminar migration of intraocular silicone oil is common. Although there were no apparent complications associated with silicone oil migration, the radiologist and clinician should be aware of this phenomenon.

"Dazed and diffused": making sense of diffusion abnormalities in neurologic pathologies.

To review diffusion abnormalities seen in diffusion-weighted MRI in neurological pathologies. We examine the clinical significance of the abnormalities in a broad spectrum of neurological diseases and highlight our current understanding of their causes. Diffusion abnormalities seen on diffusion-weighted MRI can play an important role in the diagnosis and follow-up of a broad spectrum of neurological diseases. A thorough understanding of the appearance and significance of these abnormalities is critical in patient management.

The intravertebral distribution of bone density: correspondence to intervertebral disc health and implications for vertebral strength.

UNLABELLED: This study's goal was to determine associations among the intravertebral heterogeneity in bone density, bone strength, and intervertebral disc (IVD) health. Results indicated that predictions of vertebral strength can benefit from considering the magnitude of the density heterogeneity and the congruence between the spatial distribution of density and IVD health. INTRODUCTION: This study aims to determine associations among the intravertebral heterogeneity in bone density, bone strength, and IVD health METHODS: Regional measurements of bone density were performed throughout 30 L1 vertebral bodies using micro-computed tomography (µCT) and quantitative computed tomography (QCT). The magnitude of the intravertebral heterogeneity in density was defined as the interquartile range and quartile coefficient of variation in regional densities. The spatial distribution of density was quantified using ratios of regional densities representing different anatomical zones (e.g., anterior to posterior regional densities). Cluster analysis was used to identify groups of vertebrae with similar spatial distributions of density. Vertebral strength was measured in compression. IVD health was assessed using two scoring systems. RESULTS: QCT- and µCT-based measures of the magnitude of the intravertebral heterogeneity in density were strongly correlated with each other (p < 0.005). Accounting for the interquartile range in regional densities improved predictions of vertebral strength as compared to predictions based only on mean density (R (2) = 0.59 vs. 0.43; F-test p-value = 0.018). Specifically, after adjustment for mean density, vertebral bodies with greater heterogeneity in density exhibited higher strength. No single spatial distribution of density was associated with high vertebral strength. Analyses of IVD scores suggested that the health of the adjacent IVDs may modulate the effect of a particular spatial distribution of density on vertebral strength. CONCLUSIONS: Noninvasive measurements of the intravertebral distribution of bone density, in conjunction with assessments of IVD health, can aid in predictions of bone strength and in elucidating biomechanical mechanisms of vertebral fracture.

Dental and facial bone abnormalities in pyknodysostosis: CT findings.

Pyknodysostosis is an autosomal-recessive disorder of osteoclast dysfunction causing osteosclerosis, with associated maxillofacial anomalies. Multidetector CT with multiplanar and 3D reconstruction illustrated the pathologic findings in this case. Abnormalities included multiple retained deciduous teeth, unerupted teeth with associated follicles, an irregularly expanded alveolus and body of the mandible, and an obtuse mandibular angle. Volume-rendered imaging better delineated the irregular dentition, with crowding and retention of deciduous teeth.

[Overestimation of the degree of stenosis in the intracranial internal carotid artery determined by magnetic resonance angiography compared to conventional arteriography]. / Sobreestimación del grado de estenosis de la arteria carótida interna intracraneal por la angiorresonancia respecto a la arteriografía convencional.

INTRODUCTION: In the evaluation of stenoses of the extracranial internal carotid artery (ICA), there are studies that suggest that magnetic resonance angiography (MRA) can be a substitute for conventional arteriography (CA), although it seems it has a tendency to overestimate the degree of stenosis. No similar comparison of the two techniques has been conducted in intracranial ICA. We report the case of a patient suffering from an acute ischemic stroke and symptomatic intracranial stenosis that was overestimated when MRA was used, compared to the results obtained using CA. CASE REPORT: We report the case of a 64-year-old male with a history of arterial hypertension, hypercholesterolemia and intermittent claudication who visited the emergency department because of the sudden onset of paresthesias in the left hemiface and hand. The cranial tomography scan performed in the emergency unit ruled out any acute bleeding or early signs of a stroke. Magnetic resonance (MR) diffusion imaging showed an acute ischemic stroke in the right parietal cortex. Extracranial MRA was normal and in the intracranial area a 73% stenosis was detected in the cavernous segment of the right ICA, whereas the use of CA showed the stenosis to be only 55%. On repeating the MRA to rule out a possible rechanneling of the ICA, the image obtained was exactly the same as the earlier one. CONCLUSIONS: Our observations suggest that, as occurs with the extracranial part, MRA tends to magnify the degree of stenosis in the intracranial vessels, and this technique would therefore appear to be less efficient than CA in the evaluation of intracranial stenoses.

Comparison of diameter and perimeter methods for tumor volume calculation.

PURPOSE: Lesion volume is often used as an end point in clinical trials of oncology therapy. We sought to compare the common method of using orthogonal diameters to estimate lesion volume (the diameter method) with a computer-assisted planimetric technique (the perimeter method). METHODS: Radiologists reviewed 825 magnetic resonance imaging studies from 219 patients with glioblastoma multiforme. Each study had lesion volume independently estimated via the diameter and perimeter methods. Cystic areas were subtracted out or excluded from the outlined lesion. Inter- and intrareader variability was measured by using multiple readings on 48 cases. Where serial studies were available in noncystic cases, a mock response analysis was used. RESULTS: The perimeter method had a reduced interreader and intrareader variability compared with the diameter method (using SD of differences): intrareader, 1.76 mL v 7.38 mL (P < .001); interreader, 2.51 mL v 9.07 mL (P < .001) for perimeter and diameter results, respectively. Of the 121 noncystic cases, 23 had serial data. In six (26.1%) of those 23, a classification difference occurred when the perimeter method was used versus the diameter method. CONCLUSION: Variability of measurements was reduced with the computer-assisted perimeter method compared with the diameter method, which suggests that changes in volume can be detected more accurately with the perimeter method. The differences between these techniques seem large enough to have an impact on grading the response to therapy.

Magnetic resonance imaging of cerebral infarction.

The clinical application of diffusion-weighted and perfusion-weighted magnetic resonance (MR) imaging techniques has revolutionized the diagnosis and management of acute cerebral infarction. This article discusses the physical basis of these advanced techniques and briefly demonstrates their application along with standard MR imaging and MR angiography in the setting of acute stroke.

Three-dimensional treatment planning for lung cancer.

The experience of four institutions involved in a three-dimensional treatment planning contract (NCI) for lung cancer is described. It was found that three-dimensional treatment planning has a significant potential for optimization of treatment plans for radiotherapy of lung cancer both for tumor coverage and sparing of critical normal tissues within the complex anatomy of the human thorax. Evaluation tools, such as dose-volume histograms, and three-dimensional isodose displays, such as multiple plane views, surface dose displays, etc., were found to be extremely valuable in evaluation and comparison of these complex plans. It is anticipated that with further developments in three-dimensional simulation and treatment delivery systems, major progress towards uncomplicated local regional control of lung cancer may be forthcoming.

Three-dimensional photon treatment planning for Hodgkin's disease.

A multi-institutional study was undertaken using computerized planning systems to develop three-dimensional (3-D) radiotherapy plans for Hodgkin's disease (H.D.). Two patients, the first afflicted with bulky stage II disease and another one with early stage I H.D., were studied. Three main categories of plan were produced for each patient: a) a traditional plan which modelled a conventional mantle treatment on the 3-D system, b) a 3-D standard plan where anterior and posterior fields were designed to cover 3-D target volumes, and c) a 3-D unconstrained plan where innovational techniques were employed. Three-dimensional planning provides information about the dose distribution throughout the large volume irradiated in patients with H.D. that is not available with conventional mantle planning. The use of 3-D techniques resulted in improved tumor coverage, but by allowing for uncertainties such as motion, the doses to normal tissues tended to be higher. The use of unorthodox beam arrangements introduced added complexities, and further increased the lung doses. The most even dose distributions were obtained by incorporating compensating filters into anterior fields. Clinicians showed wide variations in their assessment of the plans, possible reasons for which are addressed in this paper. In addition, calculated probabilities from models of tumor control and normal tissue damage are also presented.

Interinstitutional experience in verification of external photon dose calculations.

Under the auspices of NCI contracts, four institutions have collaborated to assess the accuracy of the pixel-based dose calculation methods they employ for external photon treatment planning. The approach relied on comparing calculations using each group's algorithm with measurements in phantoms of increasing complexity. The first set of measurements consisted of ionization chamber measurements in water phantoms in normally incident square fields, an elongated field, a wedged field, a blocked field, and an obliquely incident beam. The second group of measurements was carried out using thermoluminescent dosimeters in phantoms designed to investigate the effects of surface curvature, high density heterogeneities, and low density heterogeneities. The final study tested the entire treatment planning system, including CT data conversion, in an anthropomorphic phantom. Overall, good agreement between calculation and measurements was found for all algorithms. Regions in which discrepancies were observed are pointed out, areas for algorithm improvement are identified and the clinical import of algorithm accuracy is discussed.

Compensators for three-dimensional treatment planning.

Presented here is a method of designing compensators for a single beam or one or more pairs of beams, not necessarily parallel opposed. The objective is to produce a flat distribution in a plane that may be perpendicular to the central ray or may be an arbitrarily oriented plane, for example, a plane that bisects the hinge angle between two beams. The method takes into account not only surface irregularities but also tissue inhomogeneities, hinge angles between beams, distance from the source, and even "horns" in the beam. The design process employs convolution of Monte Carlo generated pencil beams with photon fluence distributions, appropriately modified for the presence of beam modifiers (blocks and compensators), to compute dose in a flat homogeneous phantom. Corrections for inhomogeneities and surface curvature are applied by using computerized tomography information to determine the effective path length through tissue. Multiple interactions are used to arrive at a compensator that properly incorporates changes in radiation transport, and therefore dose distribution, resulting from the presence of beam-shaping devices. In each iteration it is assumed that the required reduction in dose at a point can be achieved by reducing the fluence along the ray joining the source to computation point proportionately. The compensator design is represented as a finely spaced matrix of thickness values which is entered into a prorammable milling maching for fabrication. Dose measurements in phantom exposed to 6-MV x rays with and without compensation are presented.

Treatment planning for internal radionuclide therapy: three-dimensional dosimetry for nonuniformly distributed radionuclides.

A calculational approach is described that provides the spatially varying radiation absorbed dose, presented as isodose contours superimposed on CT images, from nonuniform and/or irregular cumulated activity distributions. CT images are read from magnetic tape and are displayed on a high-resolution color graphics display monitor. Source tissue geometries are defined on a series of contiguous CT images automatically (by an edge detection algorithm) or manually (using a trackball), thereby obtaining a three-dimensional representation of the various source volumes of activity. Dose calculations are performed using a radionuclide-specific absorbed dose point kernel in the form of a lookup table. The method described yields the spatially varying dose delivered to tumor and normal tissue volumes from a patient-specific cumulated activity distribution in a clinically implementable manner. This level of accuracy in determining normal tissue and tumor doses may prove valuable in the evaluation and implementation of radionuclides and radiolabeled compounds for therapeutic purposes.

Computer graphics tools for radiation treatment planning.

The objective of radiation therapy treatment is to eradicate a cancerous tumor while keeping the damage to nearby healthy organs to a minimum. A variety of tools employing computer graphics exist to aid in the planning and verification of treatments. Three-dimensional (3D) image information available from sources such as computerized tomography (CT) scanners is used to define the sizes, shapes, and spatial locations of the tumor and normal structures in the form of transverse contours. These object definitions are displayed in 3D perspective to enable the determination of the best possible directions from which to aim radiation beams at the tumor. The beams may be shaped to match the outline of the tumor, and their intensities may be modified using compensating devices. The results of calculations done to predict the distribution of radiation dose throughout the body due to a given set-up of beams can be displayed to the user in many ways. Dose may be shown in the form of isodose contours overlaid on transverse CT images, or on reconstructed image planes of arbitrary orientation in space. There are also a number of methods of 3D display; dose can be shown on the surface of objects, or in the form of isodose surfaces relative to anatomical structures. Computer-generated beam film images may be used to verify patient set-up and tumor coverage.

A comprehensive three-dimensional radiation treatment planning system.

A comprehensive software system has been developed to allow 3-dimensional planning of radiation therapy treatments using the extensive anatomical information made available by imaging modalities such as CT and MR. Biological structures of interest and tumor volumes are defined by outlines drawn on a sequence of CT slices. Beam set-ups may then be determined in three dimensions by displaying the structure contours in a beam's eye view, or in two dimensions using a single CT cut. Each beam defined may be shaped by the specification of block aperture contours, and its intensity may be modified with the use of planar compensators. 3D dose calculation algorithms are discussed. To evaluate the calculation results, dose volume histograms are provided, as well as various types of displays in two and three dimensions, including dose on arbitrarily oriented planes, dose on the surface of anatomical objects, and isodose surfaces. Computer generated beam films are also available as an aid in patient set-up verification. These tools, and others, provide the basis for a comprehensive 3D system that can be used throughout the treatment planning process.

A technique for computing dose volume histograms for structure combinations.

Graphical displays of three-dimensional dose distribution data are often too complex to be easily assimilated and interpreted for the evaluation of radiation treatment plans. Histograms showing dose versus volume are convenient and useful tools for summarizing dose distribution information throughout the entire volume of a given anatomic structure. They can quickly highlight characteristics such as dose uniformity and hot and cold spots, and can be used to produce statistics including tumor control and normal tissue complication probabilities. To obtain a dose volume histogram for a given structure, it may be necessary to examine its spatial relationships with neighboring structures. They may overlap, be completely disjoint, or one may be contained within another. To resolve potential ambiguities, a procedure has been developed that assigns hierarchies to anatomical structures for the purpose of histogram calculation. The hierarchy assigned to each structure is used to determine the structure within which a given dose matrix point is considered to lie. In this manner, regions of structure intersection are assigned to one object or another, and dose volume histograms can be calculated for each structure separately. From this framework, addition and subtraction of histograms can also be performed. Details of the algorithm are presented along with an example using patient data.

Arbitrary oblique image sections for 3-D radiation treatment planning.

Methods for selecting and computing arbitrary image sections for displaying anatomic and isodose information for three-dimensional treatment planning are investigated. Selection of the desired plane may be made by defining a plane that is perpendicular to an existing image section (called the base image) and passing through a line on the base image. Alternatively, the anatomic structures displayed perspectively in three dimensions as a series of contours that can be rotated and translated may be used to define an arbitrary plane for image reconstruction. The viewing screen is considered to be the plane of interest. As a typical three-dimensional image of 30 to 60 sections requires considerable computer storage (on the order of 25 megabytes), a reconstruction algorithm may need extensive memory space or CPU and disk I/O time. Of the schemes examined, we believe the following is the most efficient. One pair of images is read from the disk at a time in sequence and intersections of the rows of the cutting plane with the box formed by the consecutive images are computed. Pixel values of all points between the given images are computed by interpolation. Special cases, such as the cutting plane being parallel to or coincident with an existing image, must be considered separately.