Adsorption of tetracycline on polyvinyl chloride microplastics in aqueous environments.

Microplastics (MPs), as carriers of organic pollutants in the environment, have become a growing public concern in recent years. Tetracycline (TTC) is an antibiotic that can be absorbed by MPs and have a harmful effect on human health. Therefore, this study was conducted with the aim of investigating the adsorption rate of TTC onto polyvinyl chloride (PVC) MPs. In addition, the adsorption mechanism of this process was studied using isothermal, kinetic, and thermodynamic models. For this purpose, experimental runs using the Box-Behnken model were designed to investigate the main research parameters, including PVC dose (0.5-2 g/L), reaction time (5-55 min), initial antibiotic concentration (5-15 mg/L), and pH (4-10). Based on the research findings, the highest TTC adsorption rate (93.23%) was obtained at a pH of 10, a contact time of 55 min, an adsorbent dose of 1.25 g/L, and an antibiotic concentration of 10 mg/L. The study found that the adsorption rate of TTC followed the pseudo-second-order and Langmuir models. Thermodynamic data indicated that the process was spontaneous, exothermic, and physical. Increasing ion concentration decreased TTC adsorption, and distilled water had the highest adsorption, while municipal wastewater had the lowest adsorption. These findings provide valuable insights into the behavior of MPs and organic pollutants, underscoring the importance of conducting additional research and implementing measures to mitigate their detrimental effects on human health and the environment.

A comprehensive study on the adsorption-photocatalytic processes using CoFe2O4/SiO2/MnO2 magnetic nanocomposite as a novel photo-catalyst for removal of Cr (VI) under simulated sunlight: Isotherm, kinetic and thermodynamic studies.

Purpose: The present study aimed to investigate the efficiency of CoFe2O4/SiO2/flower-like MnO2 nanoparticles as a catalyst for Cr (VI) adsorption-photocatalytic processes. Methods: The magnetic nanocomposite used was first synthesized and then characterized using TEM, SEM, EDX, XRD, FTIR, XRF and BET advanced techniques. The removal of the Cr (VI) was performed through a batch adsorption approach and the effects of sample pH (A; 2-6), initial chromate concentration (B; 50-100 ppm) and adsorbent weight to sample volume ratio (C; 1-3 mg ml-1), hole scavenger (0.1 -0.3%w/v) and time (E; 30-60 min), to evaluate the individual and interactive effects under ultraviolet light conditions, were also studied by the central composite design in the photocatalytic process of adsorption. Results: The adsorption-photocatalytic performance of the CoFe2O4/SiO2/MnO2 composite was high in which 98.1% of Cr(VI) after 30 min of photocatalytic treatment in optimum conditions (i.e. pH = 3, catalyst concentration = 2 mg L-1, Cr(VI) concentration = 200 mg L-1, and hole scavenger concentration = 0.4% (w/ v), At laboratory temperature, speed = 400 rpm, under UV radiation).Under optimum conditions, Cr(VI) reductive followed pseudo-second-order kinetics and followed the Langmuir and Temkin isotherms, also, positive value of ΔH° indicates endothermic nature. Conclusions: The results showed that the synthesized CoFe2O4/SiO2/MnO2 magnetic nanocomposite holds a great potential for use as a photocatalyst to remove Cr (VI) in adsorption reactions. It can be used as an effective catalyst in the eradication of Cr (VI) wastewater. Supplementary Information: The online version contains supplementary material available at 10.1007/s40201-021-00763-1.

Suction Hoses of Dental Units as a Potential Source of Microbial Contamination.

OBJECTIVES: Dental units are necessary tools for modern dentistry. Microbial contamination of dental units is thought to be the result of biofilm formation in various parts of the unit. We aimed to identify the total microbial count in the suction hose of dental units, and detect the presence of Pseudomonas aeruginosa. METHODS: Random sampling of suction hoses of dental units in Birjand, Iran, was performed in dental clinics on the first (n = 115) and last (n = 115) working days of the week. Total viable counts of bacteria and detection of P. aeruginosa were performed on plate count agar and cetrimide agar, respectively. Plates were incubated at 37 °C for 48 hours. RESULTS: None of the samples were free from bacterial contamination. P. aeruginosa was detected in 22.6% and 18.3% of samples taken on the first and last working days, respectively. CONCLUSIONS: Suction hoses were heavily contaminated with bacteria, especially opportunistic pathogens, and current disinfection does not adequately control the contamination.

Evaluation of bacterial and fungal contamination of kitchens of Birjand University of Medical Sciences.

OBJECTIVE: This study aims to evaluate the total bacterial and fungal count of tools, devices and surfaces of kitchens of the centers affiliated to Birjand University of Medical Sciences. In this study, 200 samples from four kitchens of Birjand University of Medical Sciences were obtained. After the preparation of serial dilutions, samples were cultured in plate count agar (PCA) plates and Sabouraud dextrose agar (SDA). After incubation at 37 and 25 °C for 24-48 and 72-96 h respectively, the microbial and fungal colonies were counted. RESULTS: The mean bacterial and fungal count of kitchens was 7.7 * 107 and 7.6 * 104, respectively. The highest and lowest levels of bacterial contamination were related to tools/devices and cover of tools/work clothes and the highest and lowest levels of fungal count were related to forks and spoons and the tools and devices of the storage site. The rate of contamination in the kitchens of Birjand University of Medical Sciences was relatively high. Thus, serious, continuous and accurate monitoring of the units, training of people working in all stages of cooking and disinfection the tools and devices are essential for control and prevention of disease transmission.

Biological removal of phenol from strong wastewaters using a novel MSBR.

In this study, the performance of a moving-bed sequencing batch reactor (MSBR) that removes phenol from wastewater is presented. The effects of phenol concentration (50-3325 mg L(-1)), filling time (0-4 h) and aerating time (4-18 h) on the performance of the MSBR are given in terms of phenol and COD removal efficiencies. Moreover, the effect of the moving media on the overall performance of the reactor is also determined. The reactor can completely remove phenol and COD at inlet concentrations up to 3000 mg phenol L(-1) (6780 mg COD L(-1)), which was the inhibition concentration, and with a 24-h cycle time. The filling time range tested here did not significantly affect phenol or COD removal. The optimum hydraulic retention time (HRT) for the MSBR is 40 h and the critical phenol loading rate is 83.4 g phenol m(-3) h(-1), which gives a phenol removal efficiency of 99%. The reactor can also withstand shock loads from slug feeding. The moving bed contribution to phenol and COD removal efficiencies was up to 28.1 and 34.7%, respectively, at the phenol loading rate of 83.4 g m(-3) h(-1). The findings of this investigation suggest that MSBR can be a robust and promising process for effectively treating wastewaters containing inhibitor or recalcitrant compounds in industrial settings.