F-18 FDG PET/CT imaging in the diagnostic work-up of thyroid cancer patients with high serum thyroglobulin, negative I-131 whole body scan and suppressed thyrotropin: 8-year experience.

OBJECTIVE: Fluorodeoxyglucose positron emission tomography/computed tomography imaging in the follow-up of patients with differentiated thyroid carcinoma who have high serum thyroglobulin, negative iodine-131 whole body scan and suppressed thyrotropin. PATIENTS AND METHODS: A total of 90 patients (31 male and 59 female) with differentiated thyroid carcinoma who have high serum thyroglobulin and negative iodine-131 whole body scan were included in the study between July 2006 and March 2014. All patients had undergone surgery (total thyroidectomy ± lymph node dissection) followed by iodine-131 ablation. Of the patients, 82 had papillary thyroid carcinoma and 8 follicular thyroid carcinoma. Serum thyrotropin was suppressed (< 2 µ IU/ml) during the Fluor-18 fluorodeoxyglucose positron emission tomography/computed tomography imaging procedure. RESULTS: The overall sensitivity of fluor-18 fluorodeoxyglucose positron emission tomography/computed tomography imaging in the detection of metastasis of differentiated thyroid cancer was 84.8%, the specificity 79.1%, respectively. The sensitivity and specificity of fluor-18 fluorodeoxyglucose positron emission tomography/computed tomography imaging in classic type of papillary cancer was 83.3% and 54.5%, respectively. The corresponding figures for the tall cell variant was 85.7% and 87.5%, respectively. The difference between the two histological subtypes was statistically significant (p < 0.05). CONCLUSIONS: Our results suggest that fluor-18 fluorodeoxyglucose positron emission tomography/computed tomography imaging could be a valuable test for the routine follow-up of patients with differentiated thyroid carcinoma.

The use of waterworks sludge for the treatment of vegetable oil refinery industry wastewater.

Water treatment works using coagulation/flocculation in the process stream will generate a waste sludge. This sludge is termed as ferric, alum, or lime sludge based on which coagulant was primarily used. The works in Adana, Turkey uses ferric chloride. The potential for using this sludge for the treatment of vegetable oil refinery industry wastewater by coagulation has been investigated. The sludge acted as a coagulant and excellent oil and grease, COD and TSS removal efficiencies were obtained. The optimum conditions were a pH of 6 and a sludge dose of 1100 mg SS l(-1). The efficiency of sludge was also compared with alum and ferric chloride for the vegetable oil refinery wastewater. At doses of 1300-1900 mg SS l(-1), the sludge was as effective as ferric chloride and alum at removing oil and grease, COD, and TSS. In addition, various combinations of ferric chloride and waterworks sludge were also examined. Under the condition of 12.5 mg l(-1) fresh ferric chloride and 1000 mg SS l(-1) sludge dose, 99% oil and grease 99% TSS and 83% COD removal efficiencies were obtained.

Heavy metal adsorption properties of a submerged aquatic plant (Ceratophyllum demersum).

Heavy metals can be adsorbed by living or non-living biomass. Submerged aquatic plants can be used for the removal of heavy metals. In this paper, lead, zinc, and copper adsorption properties of Ceratophyllum demersum (Coontail or hornwort) were investigated and results were compared with other aquatic submerged plants. Data obtained from the initial adsorption studies indicated that C. demersum was capable of removing lead, zinc, and copper from solution. The metal biosorption was fast and equilibrium was attained within 20 min. Data obtained from further batch studies conformed well to the Langmuir Model. Maximum adsorption capacities (q(max)) onto C. demersum were 6.17 mg/g for Cu(II), 13.98 mg/g for Zn(II) and 44.8 mg/g for Pb(II). Kinetics of adsorption of zinc, lead and copper were analysed and rate constants were derived for each metal. It was found that the overall adsorption process was best described by pseudo second-order kinetics. The results showed that this submerged aquatic plant C. demersum can be successfully used for heavy metal removal under dilute metal concentration.

The use of waterworks sludge for the treatment of dye wastes.

Water treatment works using coagulation/flocculation in the process stream will generate a waste sludge. The works in Adana, Turkey uses ferric chloride. The potential for using this sludge for the treatment of reactive, direct, disperse, acidic, and basic dyestuffs by coagulation and sorption has been investigated. The sludge acted as a coagulant and removed colour with excellent removal efficiencies being obtained for basic, disperse and direct dyes. The optimum conditions were a pH value of 5 and a sludge dose of 2000 mg l(-1). Mediocre results were obtained for acidic and reactive dyes. The efficiency of the sludge was also compared with alum and ferric chloride for the same group of dyes. The sludge was also used as a coagulant to treat the wastewater from a textile factory. At doses of 2000-4000 mg l(-1), the sludge was as effective as ferric chloride and alum at removing COD. Sorption tests showed that the disperse and reactive dyes did not bind to the sludge. Langmuir and Freundlich constants were determined for the other three types of dye. Rate constants for the adsorption were determined using the Lagergren equation.