Polymer Backbone Stabilized Methylammonium Lead Bromide Perovskite Nano Islands.

Organic-inorganic hybrid perovskite materials continue to attract significant interest due to their optoelectronic application. However, the degradation phenomenon associated with hybrid structures remains a challenging aspect of commercialization. To overcome the stability issue, we have assembled the methylammonium lead bromide nano islands (MNIs) on the backbone of poly-3-dodecyl-thiophene (PDT) for the first time. The structural and morphological properties of the MNI-PDT composite were confirmed with the aid of X-ray diffraction (XRD) studies, Field emission scanning electron microscope (FESEM), and X-ray photoelectron spectroscopy (XPS). The optical properties, namely absorption studies, were carried out by ultraviolet-visible spectroscopy. The fluorescent behavior is determined by photoluminescence (PL) spectroscopy. The emission peak for the MNI-PDT was observed at 536 nm. The morphology studies supported by FESEM indicated that the nano islands are completely covered on the surface of the polymer backbone, making the hybrid (MNI-PDT) stable under environmental conditions for three months. The interfacial interaction strategy developed in the present work will provide a new approach for the stabilization of hybrids for a longer time duration.

Development of Highest Value of the Measured Efficiency of Mesoporous Petal Shaped Europium (III) Doped Cobalt Tetroxide@Cupric Oxide Hybrid Nanomaterials for Enhanced Room Temperature Photoluminescence and Fluorescence Decay Properties.

In our work, a novel series of europium (III) (Eu3+) (5, 10 and 15 wt %) doped cobalt tetroxide@cupric oxide (Co3O4@CuO) nanomaterials (NMs) were synthesized by facile coprecipitation method. The synthesized NMs were characterized by XRD (X-ray diffraction), FT-IR (Fourier transform infrared), UV (ultraviolet)-visible absorption spectra, XPS (X-ray photoelectron), BET (Brunauer-Emmett-Teller) analytical methods. Crystal structure studies revealed the formation of polycrystalline nature with monoclinic and cubic phase. The morphology studies of Eu3+x:Co3O4@CuO (x = 5, 10 and 15 wt %) showed petal shape nanoparticles (NPs) with agglomeration. Redshift in optical absorption spectra appeared with a significant impact on the optical band gap as Eu3+ concentration increases on Co3O4@CuO bimetallic oxide NMs. The chemical composition and valence state of the elements confirmed from XPS studies detected the presence of Eu, Cu, Co, O and C elements. An increase in the pore size and surface area resulted as the Eu3+ concentration increased on Co3O4@CuO NMs. However, room temperature photoluminescence (RTPL) spectra of Co3O4@CuO bimetallic oxide NMs at two different excitations (λ excitation = 280 nm, 320 nm) showed sharp, strong emission intensities located at near ultraviolet (NUV) region and weak emissions detected at far ultraviolet (FUV) regions of the RTPL spectrum. Further, visible range emission intensities were displayed by Eu3+:Co3O4@CuO (5, 10 and 15 wt %) NMs when exited at 280 nm. The characteristic white light emission peaks in the visible range of the RTPL spectra showed intense blue, green and orange colours. Emission intensity increases with an increase in Eu3+ concentration on Co3O4@CuO bimetallic oxide NMs. The fluorescence (FL) decay spectra of Eu3+ 10wt% and 15 wt%: Co3O4@CuO NMs showed a decay lifetime of 2.54 and 2.31 ns (ns) attributed to the dynamic, ultrafast excitation energy transfer between Eu3+ (dopant) and Co3O4@CuO (host) NMs. It is proposed that enhanced RTPL emission intensity and FL decay behavior of Eu3+x:Co3O4@CuO NMs closely related to the change in the optical band gap, variation in the crystallite size, formation of more number of oxygen vacancies in the crystal structure of hybrid nanomaterials.

Cellulose graphitic carbon directed iron oxide interfaced polypyrrole electrode materials for high performance supercapacitors.

The rising demand for green and clean energy urges the enlargement of economical and proficient electrode materials for supercapacitors. Herein, we designed a novel electrode material by porous cellulose graphitic carbon (CC) derived from bio-waste cornhusk via the pyrolysis route, and α-Fe2O3 decorated nanostructure with CC (CCIO) was achieved in situ pyrolysis of corn-husk and Fe(NO3)3·9H2O metal salt followed by a coating of polypyrrole (CCIOP). The CC, CCIO, and CCIOP nanocomposite electrodes were characterized by XRD, Raman, FTIR, FE-SEM/EDX, FE-TEM, XPS, and BET analysis. The CCIOP nanocomposite electrode exhibits an enhanced specific capacitance (Csp) of 290.9 F/g, which is substantial to its pristine CC (128.3 F/g), PPy (140.3 F/g), and CCIO (190.7 F/g). The Csp of CCIOP in a three-electrode system, using 1 M Na2SO4 electrolyte exhibits excellent capacity retention of 79.1 % even at a high current density of 10 A/g. The as-fabricated asymmetric supercapacitor (ASC) delivered a remarkable capacity retention of 88.7 % with a coulombic efficiency of 98.8 % even after 3000 cycles. The study shows successful utilization of cellulose from bio-waste cornhusk into a substantial template applicable in future alternative energy storage devices.

Decoding the puzzle: recent breakthroughs in understanding degradation mechanisms of Li-ion batteries.

Lithium-ion batteries (LIBs) remain at the forefront of energy research due to their capability to deliver high energy density. Understanding their degradation mechanism has been essential due to their rapid engagement in modern electric vehicles (EVs), where battery failure may incur huge losses to human life and property. The literature on this intimidating issue is rapidly growing and often very complex. This review strives to succinctly present current knowledge contributing to a more comprehensible understanding of the degradation mechanism. First, this review explains the fundamentals of LIBs and various degradation mechanisms. Then, the degradation mechanism of novel Li-rich cathodes, advanced characterization techniques for identifying it, and various theoretical models are presented and discussed. We emphasize that the degradation process is not only tied to the charge-discharge cycles; synthesis-induced stress also plays a vital role in catalyzing the degradation. Finally, we propose further studies on advanced battery materials that can potentially replace the layered cathodes.

Microstructure and Oxygen Evolution Property of Prussian Blue Analogs Prepared by Mechanical Grinding.

Solvent-free mechanochemical synthesis of efficient and low-cost double perovskite (DP), like a cage of Prussian blue (PB) and PB analogs (PBAs), is a promising approach for different applications such as chemical sensing, energy storage, and conversion. Although the solvent-free mechanochemical grinding approach has been extensively used to create halide-based perovskites, no such reports have been made for cyanide-based double perovskites. Herein, an innovative solvent-free mechanochemical synthetic strategy is demonstrated for synthesizing Fe4[Fe(CN)6]3, Co3[Fe(CN)6]2, and Ni2[Fe(CN)6], where defect sites such as carbon-nitrogen vacancies are inherently introduced during the synthesis. Among all the synthesized PB analogs, the Ni analog manifests a considerable electrocatalytic oxygen evolution reaction (OER) with a low overpotential of 288 mV to obtain the current benchmark density of 20 mA cm-2. We hypothesize that incorporating defects, such as carbon-nitrogen vacancies, and synergistic effects contribute to high catalytic activity. Our findings pave the way for an easy and inexpensive large-scale production of earth-abundant non-toxic electrocatalysts with vacancy-mediated defects for oxygen evolution reaction.

Fabrication of Ru loaded MgB2 with guar gum hybrid for photocatalytic degradation of crystal violet.

Today, dyes/pigment-based materials are confronting a serious issue in harming marine ecology. Annihilate these serious water pollutants using photoactive 2D nanohybrid catalysts showed promising comparativeness over available photocatalysts. In the present work, a facile route to decorate Ruthenium (Ru) on 2D MgB2 flower-like nanostructures was developed via ecofriendly guar gum biopolymer substantial template (MgB2/GG@Ru NFS) and its photocatalytic performance was reported. Synthesis of MgB2@Ru, MgB2/GG@Ru NFS and commercial MgB2, was studied by FTIR, XRD, FE-SEM, EDX, AFM, TEM, UV-vis spectra, and XPS analysis. From the results, the MgB2/GG@Ru NFS exhibited a superior photocatalytic performance (99.7 %) than its precursors MgB2@Ru (79.7 %), and MgB2 (53.7 %), with the degradation efficiency of the crystal violet (CV) within 100 min under visible light irradiation. The proposed photo-catalyst MgB2/GG@Ru NFS showed negligible loss of photocatalytic activity even after five successive cycles, revealing its reusability and enhanced stability due to the network structure. The photocatalytic mechanism for MgB2/GG@Ru NFS was evaluated by trapping experiment of active species, verifying that superoxide (O2-) and electron (e-) contributed significant role in the dye degradation.

Self-Assembly of Copper Oxide Interfaced MnO2 for Oxygen Evolution Reaction.

Designing efficient electrocatalytic systems through facile synthesis remains a formidable task. To address this issue, this paper presents the design of a combination material comprising two transition metal oxides (copper oxide and manganese oxide (CuO/MnO2)), synthesized using a conventional microwave technique to efficiently engage as an active oxygen evolution reaction (OER) catalyst. The structural and morphological properties of the composite were confirmed by the aid of X-ray diffraction (XRD) studies, field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and energy-dispersive spectrometry (EDS). FESEM clearly indicated well-aligned interlacing of CuO with MnO2. The OER performance was carried out in 1 M KOH. The assembled CuO/MnO2 delivered a benchmark current density (j = 10 mA cm-2) at a minimal overpotential (η = 294 mV), while pristine CuO required a high η (316 mV). Additionally, the CuO/MnO2 electrocatalyst exhibited stability for more than 15 h. These enhanced electrochemical performances were attributed to the large volume and expanded diameter of the pores, which offer ample surface area for catalytic reactions to boost OER. Furthermore, the rate kinetics of the OER are favored in composite due to low Tafel slope (77 mV/dec) compared to CuO (80 mV/dec).

A colorimetric chemosensor for distinct color change with (E)-2-(1-(3-aminophenyl)ethylideneamino)benzenethiol to detect Cu2+ in real water samples.

The study reports the synthesis of chemosensor (E)-2-(1-(3-aminophenyl)ethylideneamino)benzenethiol (C1), a highly sensitive, colorimetric metal probe that shows distinct selectivity for the detection of Cu2+ ion in various real water samples. Upon complexation with Cu2+ in CH3OH/H2O (60:40 v/v) (aqueous methanol), the C1 demonstrate significant enhancement in the absorption at 250 nm and 300 nm with a color change from light yellow to brown which was visualized using naked-eye. Therefore, these properties make C1 as an effective candidate for on-site Cu2+ ions detection. The emission spectrum of C1 illustrated "TURN-ON" recognition of Cu2+ with a limit of detection (LOD) of 46 nM. Furthermore, Density Functional Theory (DFT) calculations were performed to better understand the interactions between C1 and Cu2+. The obtained results suggested that the electron clouds present around the -NH2 in nitrogen and sulfur in -SH play a pivotal role in the formation of a stable complex. The computational results were in good agreement with the experimental UV-visible spectrometry results.

Statistical physics double-layer models for the experimental study and theoretical modeling of methyl orange dye adsorption on AlMnTiO nanocomposite.

A Al2O3/MnO2/TiO2 (AlMnTiO) nanocomposite was synthesized using the thermal coprecipitation method and the adsorption performance of methyl orange (MO) dye from aqueous solution was carried out. Single-parameter optimization was used to explore the properties of AlMnTiO nanocomposite parameters on dye adsorption, including dose of adsorbent, solution pH, contact duration, and starting MO concentration. The model is the appropriate adsorption isotherm for the equilibrium process using a pseudo-second-order kinetic model property. Langmuir plot had a Qmax (mg/g) of 198.4 and best fitted (R2=0.990) among different isotherm models. The relevant parameters were computed using the dual-energy binary-layer statistical physics model. The statistical physics binary-layer model yield n (stoichiometric coefficient) values of 0.410, 0.440, and 0.453, all values are below 1, demonstrating the multi-docking process. AlMnTiO nanocomposite was regenerated up to six times, making the material extremely cost-effective. Using AlMnTiO nanocomposite, MO dye was removed from wastewater both in the laboratory and on the industrial scale.

Mechanochemically interlocked cubane copper complex interface for WOLED.

In the rapid development of organic light-emitting diodes (OLEDs), phosphorescent transition metal complexes have played a crucial role as the most promising candidates for next generation display and lighting applications. However, most devices are fabricated using iridium and platinum-based complexes which are expensive and available in very limited quantities, whereas using relatively abundant organometallic complexes for fabrication results mostly in inefficient performance results. To overcome these issues, we have synthesized tetra copper iodide with tetra triphenyl cage like structure (denoted as CIPh) as an emerging class of luminescent material by mechanochemical grinding followed by thermal treatment for application in white OLED. The CIPh complex exhibits considerable quantum yield and a millisecond decay lifetime. Phosphorescent OLEDs were fabricated using CIPh complex as emitter shows a remarkable performance with external quantum efficiency and current efficiency of 5.28 % and 22.76 cd/A, with a high brightness of 4200 cd m-2, respectively. White OLEDs were also fabricated with a fluorescent blue and phosphorescent red emitted with (CIPh) as green emitter and achieved an impressive CRI of 82 with an EQE of over 3 %. This is the first ever attempt at fabricating WOLEDs using organocopper complex.

Hydrothermal synthesis of CuO@MnO2 on nitrogen-doped multiwalled carbon nanotube composite electrodes for supercapacitor applications.

Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs) have been used to fabricate nanostructured materials for various energy devices, such as supercapacitors, sensors, batteries, and electrocatalysts. Nitrogen-doped carbon-based electrodes have been widely used to improve supercapacitor applications via various chemical approaches. Based on previous studies, CuO@MnO2 and CuO@MnO2/N-MWCNT composites were synthesized using a sonication-supported hydrothermal reaction process to evaluate their supercapacitor properties. The structural and morphological properties of the synthesized composite materials were characterized via Raman spectroscopy, XRD, SEM, and SEM-EDX, and the morphological properties of the composite materials were confirmed by the nanostructured composite at the nanometer scale. The CuO@MnO2 and CuO@MnO2/N-MWCNT composite electrodes were fabricated in a three-electrode configuration, and electrochemical analysis was performed via CV, GCD, and EIS. The composite electrodes exhibited the specific capacitance of ~ 184 F g-1 at 0.5 A g-1 in the presence of a 5 M KOH electrolyte for the three-electrode supercapacitor application. Furthermore, it exhibited significantly improved specific capacitances and excellent cycling stability up to 5000 GCD cycles, with a 98.5% capacity retention.

Enhanced photocatalytic crystal-violet degradation performances of sonochemically-synthesized AC-CeO2 nanocomposites.

Semiconductor-based photocatalysis is one of the favorable techniques for the wastewater treatment. Herein, we synthesized the activated carbon-decorated cerium dioxide (AC-CeO2) nanocomposites via the facile ultrasonication method by using the biomass-derived AC nanoflakes and the sonochemically-synthesized CeO2 nanoparticles. The AC-CeO2 nanocomposites exhibited the aggregated morphology with the AC nanoflakes-anchored CeO2 nanoparticles. Since the hybridization of conductive AC and semiconductive CeO2 would lead to the increased photocarrier transport and the reduced photocarrier recombination, during the photocatalytic reaction, the AC-CeO2 nanocomposites showed the enhanced crystal violet dye-degradation efficiency up to 97.9 % within 135 min. The results suggest that the AC-CeO2 nanocomposites hold promise as a prominent photocatalyst for future green environmental technology.

High interfacial charge separation in visible-light active Z- scheme g-C3N4/MoS2 heterojunction: Mechanism and degradation of sulfasalazine.

Examination of highly proficient photoactive materials for the degradation of antibiotics from the aqueous solution is the need of the hour. In the present study, a 2D/2D binary junction GCM, formed between graphitic-carbon nitride (g-C3N4) and molybdenum disulphide (MoS2), was synthesized using facile hydrothermal method and its photo-efficacy was tested for the degradation of sulfasalazine (SUL) from aqueous solution under visible-light irradiation. Morphological analysis indicated the nanosheets arrangement of MoS2 and g-C3N4. The visible-light driven experiments indicated that 97% antibiotic was degraded by GCM-30% within 90 min which was found to be quite high than pristine g-C3N4 and MoS2 at solution pH of 6, GCM-30% dose of 20 mg, and SUL concentration of 20 mgL-1. The degradation performance of GCM-30% was selectively improved due to enhanced visible-light absorption, high charge carrier separation, and high redox ability of the photogenerated charges which was induced by the effective Z-scheme 2D/2D heterojunction formed between g-C3N4 and MoS2. The reactive radicals as determined by the scavenging study were •O2-, and h+. A detailed degradation mechanism of SUL by GCM-30% was also predicted based on the detailed examination of the band gaps of g-C3N4 and MoS2.

Removal of nutrients from pulp and paper biorefinery effluent: Operation, kinetic modelling and optimization by response surface methodology.

This study investigated the effectiveness of extended aeration system (EAS) and rice straw activated carbon-extended aeration system (RAC-EAS) in the treatment of pulp and paper biorefinery effluent (PPBE). RAC-EAS focused on the efficient utilization of lignocellulosic biomass waste (rice straw) as a biosorbent in the treatment process. The experiment was designed by response surface methodology (RSM) and conducted using a bioreactor that operated at 1-3 days hydraulic retention times (HRT) with PPBE concentrations at 20, 60 and 100%. The bioreactor was fed with real PPBE having initial ammonia-N and total phosphorus (TP) concentrations that varied between 11.74 and 59.02 mg/L and 31-161 mg/L, respectively. Findings from the optimized approach by RSM indicated 84.51% and 91.71% ammonia-N and 77.62% and 84.64% total phosphorus reduction in concentration for EAS and RAC-EAS, respectively, with high nitrification rate observed in both bioreactors. Kinetic model optimization indicated that modified stover models was the best suited and were statistically significant (R2 ≥ 0.98) in the analysis of substrate removal rates for ammonia-N and total phosphorus. Maximum nutrients elimination was attained at 60% PPBE and 48 h HRT. Therefore, the model can be utilized in the design and optimization of EAS and RAC-EAS systems and consequently in the prediction of bioreactor behavior.

Bimetallic Cu/Fe MOF-Based Nanosheet Film via Binder-Free Drop-Casting Route: A Highly Efficient Urea-Electrolysis Catalyst.

Developing efficient electrocatalysts for urea oxidation reaction (UOR) can be a promising alternative strategy to substitute the sluggish oxygen evolution reaction (OER), thereby producing hydrogen at a lower cell-voltage. Herein, we synthesized a binder-free thin film of ultrathin sheets of bimetallic Cu-Fe-based metal-organic frameworks (Cu/Fe-MOFs) on a nickel foam via a drop-casting route. In addition to the scalable route, the drop-casted film-electrode demonstrates the lower UOR potentials of 1.59, 1.58, 1.54, 1.51, 1.43 and 1.37 V vs. RHE to achieve the current densities of 2500, 2000, 1000, 500, 100 and 10 mA cm-2, respectively. These UOR potentials are relatively lower than that acquired by the pristine Fe-MOF-based film-electrode synthesized via a similar route. For example, at 1.59 V vs. RHE, the Cu/Fe-MOF electrode exhibits a remarkably ultra-high anodic current density of 2500 mA cm-2, while the pristine Fe-MOF electrode exhibits only 949.10 mA cm-2. It is worth noting that the Cu/Fe-MOF electrode at this potential exhibits an OER current density of only 725 mA cm-2, which is far inconsequential as compared to the UOR current densities, implying the profound impact of the bimetallic cores of the MOFs on catalyzing UOR. In addition, the Cu/Fe-MOF electrode also exhibits a long-term electrochemical robustness during UOR.

A zero-dimensional/two-dimensional Ag-Ag2S-CdS plasmonic nanohybrid for rapid photodegradation of organic pollutant by solar light.

Herein, the two synthesis strategies are employed for rational design of 0D/2DAg-Ag2S-CdS heterojunctions towards photocatalytic degradation of methyl orange (MO) under simulated solar light. As the first strategy, a ternary Ag-Ag2S-CdS nanosheet (NS) heterojunction was fabricated via combined cation exchange and photo-reduction (CEPR) method (Ag-Ag2S-CdS/CEPR). The second strategy employed coprecipitation (CP) method (Ag-Ag2S-CdS/CP). Strikingly, SEM, TEM and HR-TEM images are manifested the first strategy is beneficial for retaining the original thickness (20.2 nm) of CdS NSs with a dominant formation of metallic Ag, whereas the second strategy increases the thickness (33.4 nm) of CdS NSs with a dominant formation of Ag2S. The Ag-Ag2S-CdS/CEPR exhibited 1.8-fold and 3.5-fold enhancement in photocatalytic activities as compared to those of Ag-Ag2S-CdS/CP and bare CdS NSs, respectively. This enhanced photocatalytic activity could be ascribed to fact that the first strategy produces a high-quality interface with intimate contact between the Ag-Ag2S-CdS heterojunctions, resulting in enhanced separation of photo-excited charge carriers, extended light absorption, and enriched active-sites. Furthermore, the degradation efficiency of Ag-Ag2S-CdS/CEPR was significantly reduced to ∼5% in the presence of BQ (•O2- scavenger), indicating that •O2- is the major active species that can decompose MO dye under simulated solar light.

Sonication-supported synthesis of cobalt oxide assembled on an N-MWCNT composite for electrochemical supercapacitors via three-electrode configuration.

The Co3O4@N-MWCNT composite was synthesized by a sonication-supported thermal reduction process for supercapacitor applications. The structural and morphological properties of the materials were characterized via Raman, XRD, XPS, SEM-EDX, and FE-TEM analysis. The composite electrode was constructed into a three-electrode configuration and examined by using CV, GCD and EIS analysis. The demonstrated electrochemical value of ~ 225 F/g at 0.5 A/g by the electrode made it appropriate for potential use in supercapacitor applications.

Nanostructurally engineered TiO2 embedded Mentha aquatica biowaste derived carbon for supercapacitor applications.

The invention of cost-effective, clean, and eco-friendly energy storage technology has been capturing a lot of worldwide interest. Herein, biogenically synthesized TiO2 nanoparticles (NPs) were ultrasonically coupled with biomass-derived activated carbon (BAC) to obtain composite (denoted as TiO2@BAC). With the inspiration of nature, Mentha Aquatica leaves extract was employed for biogenic preparation of TiO2 NPs, and residual solid waste (SW) after extract was subsequently utilized for BAC. It is noteworthy that, this unique intensive method does not require any harmful or toxic chemicals and solvents, and no secondary waste is generated. TEM analysis of TiO2@BAC revealed spherical morphology of TiO2 NPs (average size âˆ¼ 18 nm) that were accumulated on nanosheets. Raman, XRD, and XPS manifested the successful construction of TiO2@BAC. The electrochemical performance of the as-synthesized BAC, TiO2 NPs, and TiO2@BAC electrodes was tested towards supercapacitor applications. Notably, the TiO2@BAC electrode exhibited capacitance of 149 F/g at a current density of 1 A/g, which is approximately twice than that of the bare TiO2 electrode (76 F/g) along with excellent capacitance restoration of ∼99%. The TiO2@BAC electrode further revealed outstanding cyclic stability, exhibiting capacitance retention of ∼90% (at 5 A/g) after 10,000 charge/discharge cycles. Furthermore, the TiO2@BAC electrode delivered optimal specific energy density (6.96 Wh/kg) and large power density (2.07 kW/kg at 10 A/g). Moreover, the TiO2@BAC delivers an excellent restoration and retention performances of ∼100 and ∼95% (after 10,000 cycles) at 1 A/g with ∼98% coulombic efficiency in symmetric configuration (maximum cell voltage of 1.2 V).

Visible light-driven photocatalytic rapid degradation of organic contaminants engaging manganese dioxide-incorporated iron oxide three dimensional nanoflowers.

Water pollution via hazardous organic pollutants poses a high threat to the environment and globally imperils aquatic life and human health. Therefore, the elimination of toxic organic waste from water sources is vital to ensure a healthy green environment. In the current work, we synthesized α-MnO2-Fe3O4 3D-flower like structure using a two-step hydrothermal method and explored the combination in a visible-light-assisted photocatalytic degrdation of dyes. The attained high specific surface area of 82 m2/g with mesoporous nature of α-MnO2 and Fe3O4 together can generate more active sites after exposure to visible light, leading to remarkable photodegradation performance. Significantly, twofold higher dye (methylene blue, MB (94.8%/120 min; crystal violet, CV (93.7%/120 min)) and drug (LVO 91%/90 min) photodegradations were observed with α-MnO2-Fe3O4 as catalyst than pure α-MnO2 and Fe3O4 at pH 6, respectively. This is attributed to the higher surface area and synergistic effect between Mn and Fe. More than 85% stability was observed with optimized catalysts employing MB and CV dyes, demonstrating the excellent reusability of the α-MnO2-Fe3O4. The underlying mechanism indicates that the formation of reactive oxygen species predominantly plays a role in the photodegradation of dyes under visible light. Consequently, these new insights will shed light on the practical applications of the α-MnO2-Fe3O4 3D-flower-like spherical structure for eco-friendly remediation via wastewater treatment.

Reduced Potential Barrier of Sodium-Substituted Disordered Rocksalt Cathode for Oxygen Evolution Electrocatalysts.

Cation-disordered rocksalt (DRX) cathodes have been viewed as next-generation high-energy density materials surpassing conventional layered cathodes for lithium-ion battery (LIB) technology. Utilizing the opportunity of a better cation mixing facility in DRX, we synthesize Na-doped DRX as an efficient electrocatalyst toward oxygen evolution reaction (OER). This novel OER electrocatalyst generates a current density of 10 mA cm−2 at an overpotential (η) of 270 mV, Tafel slope of 67.5 mV dec−1, and long-term stability >5.5 days' superior to benchmark IrO2 (η = 330 mV with Tafel slope = 74.8 mV dec−1). This superior electrochemical behavior is well supported by experiment and sparse Gaussian process potential (SGPP) machine learning-based search for minimum energy structure. Moreover, as oxygen binding energy (OBE) on the surface closely relates to OER activity, our density functional theory (DFT) calculations reveal that Na-doping assists in facile O2 evolution (OBE = 5.45 eV) compared with pristine-DRX (6.51 eV).