RESUMO
A large scholarship currently holds that before the onset of anthropogenic global warming, natural climatic changes long provoked subsistence crises and, occasionally, civilizational collapses among human societies. This scholarship, which we term the 'history of climate and society' (HCS), is pursued by researchers from a wide range of disciplines, including archaeologists, economists, geneticists, geographers, historians, linguists and palaeoclimatologists. We argue that, despite the wide interest in HCS, the field suffers from numerous biases, and often does not account for the local effects and spatiotemporal heterogeneity of past climate changes or the challenges of interpreting historical sources. Here we propose an interdisciplinary framework for uncovering climate-society interactions that emphasizes the mechanics by which climate change has influenced human history, and the uncertainties inherent in discerning that influence across different spatiotemporal scales. Although we acknowledge that climate change has sometimes had destructive effects on past societies, the application of our framework to numerous case studies uncovers five pathways by which populations survived-and often thrived-in the face of climatic pressures.
Assuntos
Civilização , Mudança Climática/estatística & dados numéricos , Pesquisa , Mudança Social , Animais , Civilização/história , Mudança Climática/economia , Mudança Climática/história , Secas , Fontes Geradoras de Energia , História do Século XV , História do Século XVI , História do Século XVII , História do Século XVIII , História do Século XIX , História do Século XX , História do Século XXI , História Antiga , História Medieval , Migração Humana , Humanos , Política , Chuva , Pesquisa/tendências , Mudança Social/história , TemperaturaRESUMO
In this study, ultrathin silver plasmonic nanostructures are fabricated by sputter deposition on substrates patterned by nanoimprint lithography, without additional lift-off processes. Detailed investigation of silver growth on different substrates results in a structured, defect-free silver film with thickness down to 6 nm, deposited on a thin layer of doped zinc oxide. Variation of the aspect ratio of the nanostructure reduces grain formation at the flanks, allowing for well-separated disk and hole arrays, even though conventional magnetron sputtering is less directional than evaporation. The resulting disk-hole array features high average transmittance in the visible range of 71% and a strong plasmonic dipole resonance in the near-infrared region. It is shown that the ultrathin Ag film exhibits even lower optical losses in the NIR range compared to known bulk optical properties. The presented FDTD simulations agree well with experimental spectra and show that for defect-free, ultrathin Ag nanostructures, bulk optical properties of Ag are sufficient for a reliable simulation-based design.
RESUMO
This article sheds new light on the disastrous event of St Mary Magdalene's Flood in Central Europe in 1342, which scholars have thus far largely neglected, by examining administrative documents like charters and accounts for the first time, while also considering scientific proxy data like precipitation reconstructions based on tree rings. The result is a much more nuanced reconstruction of these two years that included extreme flooding (in February and July 1342 and July 1343), but also pronounced dryness in spring 1342, which might explain the extreme erosion events geomorphologists attribute to the strong precipitation of these years. The events of 1342/43 are a good example of how a pre-modern, multi-factorial compound event could have disastrous consequences when natural extreme events and disadvantageous socio-economic conditions coincided. Examining a wider variety of written sources reveals that the supra-regional dearth and famine in Central Europe was linked to the fact that the flood occured before grain could be harvested in 1342. Furthermore, the article focuses on infrastructural adaptions like changes in bridge design or large water-infrastructures, as well as on normative reactions at a regional or local level that can be understood, at least partially, to have been caused by the flood disaster. These processes of technological and normative adaption can be understood, on the one hand, as second-order-perceptions of nature in Luhmann's sense; on the other hand, they illustrate the importance of natural extreme events as a catalyst for pre-modern development of infrastruture. In the aftermath of 1342/43, areas to the north of the Alps implemented flood-protection measures to protect the public welfare for the first time, at least such initiatives that went beyond local responses to involve regional and supra-regional powers up to and including the Holy Roman Emperor.
RESUMO
A nanostructured transparent electrode with high average visible transmittance of 76%, low sheet resistance of 7.0 Ω/sq and steep transmittance drop in the near-infrared (NIR) range is investigated by simulations and experiments. The electrode is composed of a nanostructured substrate, on which a trilayer, consisting of an ultrathin 14 nm thick silver film embedded between thin films of TiO2 and Al-doped ZnO, is deposited. Directional silver deposition results in the formation of a disk-hole array without additional lift-off or etching steps. While the trilayer approach enables increased visible transmittance, the transmittance in the NIR regime is decreased by a broadband plasmonic dipole excitation in the disk-hole array. Moreover, a rich mode spectrum of weaker multipole surface plasmon excitations is observed in the nanodisk- and nanohole array. The presented electrode holds great potential for applications in optoelectronic devices, solar control coatings and solar cells.
RESUMO
Nanostructured surfaces and nanoparticles are already widely employed in many different fields of research, and there is an ever-growing demand for reliable, reproducible and scalable nanofabrication methods. This is especially valid for multifunctional nanomaterials with physical properties that are tailored for specific applications. Here, we report on the fabrication of two types of nanomaterials. Specifically, we present surfaces comprising a highly uniform array of elliptical pillars as well as nanoparticles with the shape of nanopockets, possessing nano-cavities. The structures are fabricated by nanoimprint lithography, physical and wet-chemical etching and sputter deposition of thin films of various materials to achieve a multifunctional nanomaterial with defined optical and magnetic properties. We show that the nanopockets can be transferred to solution, yielding a nanoparticle dispersion. All fabrication steps are carefully characterized by microscopic and optical methods. Additionally, we show optical simulation results that are in good agreement with the experimentally obtained data. Thus, this versatile method allows to fabricate nanomaterials with specific tailor-made physical properties that can be designed by modelling prior to the actual fabrication process. Finally, we discuss possible application areas of these nanomaterials, which range from biology and medicine to electronics, photovoltaics and photocatalysis.
RESUMO
Indium tin oxide (ITO) thin films were sputter-deposited at ambient temperature on a glass-like substrate that was periodically nanostructured by UV nanoimprint lithography. Cross gratings of the corrugated and conformal ITO, with different periods and modulation depths, were tailored to exhibit light trapping or antireflection properties at specific spectral windows by combined optical simulations and experiments. For dense gratings, the light transmission in the 450-850 nm range was enhanced by 8% (absolute) compared to flat ITO films, which is one of the largest performance improvements reported in the literature for nanostructured transparent electrodes. Increasing the grating period shifts the threshold for diffraction coupling to waveguide modes in the visible and near infrared part of the spectrum, resulting in broad light trapping behaviour at wavelengths below this threshold. This work demonstrates a simple processing route at ambient temperature for the fabrication of high-performance transparent electrodes in order to fulfil different device requirements.
RESUMO
Transparent electrodes based on an ultrathin Cu layer, embedded between two dielectrics, are optimized by simulations and experiments. Different dielectrics are screened in transfer matrix simulations for maximizing the broad-band transmittance. Based on this, sputtered electrodes were developed with the Cu embedded between TiOX-coated glass or PET substrate and an Al-doped ZnO (AZO) top layer. It is found that, for ultrathin Cu layers, increased sputter power fosters island coalescence, leading to superior optical and electrical performance compared to previously reported Cu-based electrodes. Simulations showed that the electrode design optimized with air as ambient medium has to be adapted in the case of electrode implementation in a hybrid perovskite solar cell of inverted architecture.
RESUMO
This paper investigates plasmonic amplification in two commonly used optical configurations for fluorescence readout of bioassays - epifluorescence (EPF) and total internal reflection fluorescence (TIRF). The plasmonic amplification in the EPF configuration was implemented by using crossed gold diffraction grating and Kretschmann geometry of attenuated total reflection method (ATR) was employed in the TIRF configuration. Identical assay, surface architecture for analyte capture, and optics for the excitation, collection and detection of emitted fluorescence light intensity were used in both TIRF and EPF configurations. Simulations predict that the crossed gold diffraction grating (EPF) can amplify the fluorescence signal by a factor of 10(2) by the combination of surface plasmon-enhanced excitation and directional surface plasmon-coupled emission in the red part of spectrum. This factor is about order of magnitude higher than that predicted for the Kretschmann geometry (TIRF) which only took advantage of the surface plasmon-enhanced excitation. When applied for the readout of sandwich interleukin 6 (IL-6) immunoassay, the plasmonically amplified EPF geometry designed for Alexa Fluor 647 labels offered 4-times higher fluorescence signal intensity compared to TIRF. Interestingly, both geometries allowed reaching the same detection limit of 0.4pM despite of the difference in the fluorescence signal enhancement. This is attributed to inherently lower background of fluorescence signal for TIRF geometry compared to that for EPF which compensates for the weaker fluorescence signal enhancement. The analysis of the inflammation biomarker IL-6 in serum at medically relevant concentrations and the utilization of plasmonic amplification for the fluorescence measurement of kinetics of surface affinity reactions are demonstrated for both EPF and TIRF readout.
RESUMO
We investigated the simultaneous excitation of localized surface plasmons (LSPs) and propagating surface plasmons (PSPs) on a thin metallic film with an array of nanoholes for the enhancement of fluorescence intensity in heterogeneous bioassays. Experiments supported by simulations reveal that the co-excitation of PSP and LSP modes on the nanohole array in a Kretschmann configuration allows for fluorescence enhancement of about 10(2) as compared to a flat Au surface irradiated off-resonance. Moreover, this fluorescence signal was about 3-fold higher on the substrate supporting both PSPs and LSPs than that on a flat surface where only PSPs were resonantly excited. Simulations also indicated the highly directional fluorescence emission as well as the high fluorescence collection efficiency on the nanohole array substrate. Our contribution attempts to de-convolute the origin of this enhancement and identify further ways to maximize the efficiency of surface plasmon-enhanced fluorescence spectroscopy for implementation in ultra-sensitive bioassays.
Assuntos
Técnicas Biossensoriais/métodos , Espectrometria de Fluorescência/métodos , Ressonância de Plasmônio de Superfície/métodos , Simulação por Computador , Ouro , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Nanoporos/ultraestruturaRESUMO
Surfaces of metallic films and metallic nanoparticles can strongly confine electromagnetic field through its coupling to propagating or localized surface plasmons. This interaction is associated with large enhancement of the field intensity and local optical density of states which provides means to increase excitation rate, raise quantum yield, and control far field angular distribution of fluorescence light emitted by organic dyes and quantum dots. Such emitters are commonly used as labels in assays for detection of chemical and biological species. Their interaction with surface plasmons allows amplifying fluorescence signal (brightness) that accompanies molecular binding events by several orders of magnitude. In conjunction with interfacial architectures for the specific capture of target analyte on a metallic surface, plasmon-enhanced fluorescence (PEF) that is also referred to as metal-enhanced fluorescence (MEF) represents an attractive method for shortening detection times and increasing sensitivity of various fluorescence-based analytical technologies. This review provides an introduction to fundamentals of PEF, illustrates current developments in design of metallic nanostructures for efficient fluorescence signal amplification that utilizes propagating and localized surface plasmons, and summarizes current implementations to biosensors for detection of trace amounts of biomarkers, toxins, and pathogens that are relevant to medical diagnostics and food control.
RESUMO
Corrugated metallic surfaces offer means for efficient amplification of fluorescence bioassay signal based on the near field coupling between surface plasmons and fluorophore emitters that are used as labels. This paper discusses the design of such plasmonic structure to enhance the sensitivity of immunoassays with epi-fluorescence readout geometry. In particular, crossed gold grating is theoretically and experimentally investigated for combined increasing of the excitation rate at the fluorophore excitation wavelength and utilizing directional surface plasmon-coupled fluorescence emission. For Alexa Fluor 647 dye, the enhancement factor of around EF = 102 was simulated and experimentally measured. When applied to a sandwich interleukin-6 immunoassay, highly surface-selective enhancement reaching a similar value was observed. Besides increasing the measured fluorescence signal associated with the molecular binding events on a surface by two orders of magnitude, the presented approach enables measuring kinetics of the surface reaction that is otherwise masked by strong background signal originating from bulk solution.
Assuntos
Bioensaio/instrumentação , Técnicas Biossensoriais/instrumentação , Refratometria/instrumentação , Espectrometria de Fluorescência/instrumentação , Análise Espectral Raman/instrumentação , Ressonância de Plasmônio de Superfície/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Dispositivos ÓpticosRESUMO
Metallic nanostructures supporting collective localized surface plasmons (cLSPs) are investigated for the amplification of signal in fluorescence biosensors. cLSPs modes are supported by diffractive arrays of metallic nanoparticles that are embedded in a refractive index-symmetrical environment. They exhibit lower damping and thus their excitation is associated with higher field intensity enhancement and narrower resonance than that for regular localized surface plasmons. Through finite difference time domain (FDTD) simulations, we designed a novel cLSP structure that exhibit two resonances overlapping with absorption and emission wavelengths of assumed fluorophore (similar to Cy5 or Alexa Fluor 647). The simulations of surface plasmon-enhanced fluorescence (PEF) took into account the cLSP-driven excitation, directional emission, and mediated quantum yield in realistic sandwich immunoassays that utilize fluorophore-labeled detection antibodies. Achieved results indicate that cLSP-based structures holds potential for extraordinarily high fluorescence intensity enhancement that exceeds a value of 10(3).