A multicentre cohort study of serum and peritoneal biomarkers to predict anastomotic leakage after rectal cancer resection.

AIM: Anastomotic leakage (AL) is one of the most feared complications after rectal resection. This study aimed to assess a combination of biomarkers for early detection of AL after rectal cancer resection. METHOD: This study was an international multicentre prospective cohort study. All patients received a pelvic drain after rectal cancer resection. On the first three postoperative days drain fluid was collected daily and C-reactive protein (CRP) was measured. Matrix metalloproteinase-2 (MMP2), MMP9, glucose, lactate, interleukin 1-beta (IL1ß), IL6, IL10, tumour necrosis factor alpha (TNFα), Escherichia coli, Enterococcus faecalis, lipopolysaccharide-binding protein and amylase were measured in the drain fluid. Prediction models for AL were built for each postoperative day using multivariate penalized logistic regression. Model performance was estimated by the c-index for discrimination. The model with the best performance was visualized with a nomogram and calibration was plotted. RESULTS: A total of 292 patients were analysed; 38 (13.0%) patients suffered from AL, with a median interval to diagnosis of 6.0 (interquartile ratio 4.0-14.8) days. AL occurred less often after partial than after total mesorectal excision (4.9% vs 15.2%, P = 0.035). Of all patients with AL, 26 (68.4%) required reoperation. AL was more often treated by reoperation in patients without a diverting ileostomy (18/20 vs 8/18, P = 0.03). The prediction model for postoperative day 1 included MMP9, TNFα, diverting ileostomy and surgical technique (c-index = 0.71). The prediction model for postoperative day 2 only included CRP (c-index = 0.69). The prediction model for postoperative day 3 included CRP and MMP9 and obtained the best model performance (c-index = 0.78). CONCLUSION: The combination of serum CRP and peritoneal MMP9 may be useful for earlier prediction of AL after rectal cancer resection. In clinical practice, this combination of biomarkers should be interpreted in the clinical context as with any other diagnostic tool.

Battling bacterial infection with hexamethylene diisocyanate cross-linked and Cefaclor-loaded collagen scaffolds.

Implant infections remain a major healthcare problem due to the prolonged hospitalisation period required to disrupt and treat bacterial biofilm formation, and the need for additional surgery to remove/replace the infected implant, which if not removed in a timely manner may lead to sepsis. Although localised drug administration, via an implanted scaffold, has shown promise in a clinical setting, the ideal scaffold cross-linking (to initially withstand the aggressive infection environment) and drug (to be effective against infection) have yet to be identified. In this work, in the first instance, the biochemical, biophysical, and biological properties of collagen sponges as a function of various concentrations (0.625%, 1.0%, 2.5%, 5.0%, and 10.0%) of hexamethylene diisocyanate were assessed. Data presented illustrate that hexamethylene diisocyanate at 0.625% concentration was able to effectively stabilise collagen scaffolds, as judged by the reduction in free amines, adequate resistance to collagenase digestion, reduction in swelling, increase in denaturation temperature, suitable mechanical properties, and appropriate cytocompatibility. Subsequently, collagen scaffolds stabilised with 0.625% hexamethylene diisocyanate were loaded with variable concentrations (0, 10, 100, and 500 µg ml-1) of Cefaclor and Ranalexin. Both drugs exhibited similar loading efficiency, release profile, and cytocompatibility. However, only collagen scaffolds loaded with 100 µg ml-1 Cefaclor exhibited adequate antibacterial properties against both 106 and 108 colony-forming units per ml of both Escherichia coli and Staphylococcus epidermidis.

In Vitro Enzymatic Degradation of Tissue Grafts and Collagen Biomaterials by Matrix Metalloproteinases: Improving the Collagenase Assay.

Matrix metalloproteinase-1 and -8 are active during the wound healing and remodelling processes, degrading native extracellular matrix and implantable devices. However, traditional in vitro assays utilize primarily matrix metalloproteinase-1 to mimic the in vivo degradation microenvironment. Herein, we assessed the influence of various concentrations of matrix metalloproteinase- 1 and 8 (50, 100, and 200 U/mL) as a function of pH (5.5 and 7.4) and time (3, 6, 9, 12, and 24 h) on the degradation profile of three tissue grafts (chemically cross-linked Permacol, nonchemically cross-linked Permacol and nonchemically cross-linked Strattice) and a collagen biomaterial (nonchemically cross-linked collagen sponge). Chemically cross-linked and nonchemically cross-linked Permacol samples exhibited the highest resistance to enzymatic degradation, while nonchemically cross-linked collagen sponges exhibited the least resistance to enzymatic degradation. Qualitative and quantitative degradation analysis of all samples revealed a similar degradation profile over time, independently of the matrix metalloproteinase used and its respective concentration and pH. These data indicate that matrix metalloproteinase-1 and matrix metalloproteinase-8 exhibit similar degradation profile in vitro, suggesting that matrix metalloproteinase-8 should be used for collagenase assay.

Monocyte subsets in blood correlate with obesity related response of macrophages to biomaterials in vitro.

Macrophages play a key role in the foreign body response. In this study it was investigated whether obesity affects the acute response of macrophages to biomaterials in vitro and whether this response is associated with biomarkers in blood. CD14 + monocytes were isolated from blood from obese and age and gender matched lean persons. Monocyte subsets were determined based on CD14 and CD16 on their surface. C-reactive protein (CRP) was measured in peripheral blood. The response of monocyte-derived macrophages to polypropylene (PP), polylactic acid (PLA), polyethylene terephthalate (PET) monofilament, and PET-multifilament (mPET) in culture was based on cytokine production. More IL-6 (for PET), less CCL18 (all materials) and IL-1ra (for PLA) was produced by macrophages from obese patients than lean subjects. Body mass index, serum CRP and to a lesser extend percentages of monocyte subtypes correlated with IL-6, TNFα, CCL18, and IL-1ra production. Taken together, monocyte-derived macrophages of obese patients respond more pro-inflammatory and less anti-inflammatory to biomaterials than macrophages from lean subjects, depending on the material. These results are a step towards personalized medicine for the development of a model or even a blood test to decide which biomaterial might be suitable for each patient.

Innovating in the medical device industry - challenges & opportunities ESB 2015 translational research symposium.

The European Society for Biomaterials 2015 Translational Research Symposium focused on 'Innovating in the Medical Device Industry - Challenges & Opportunities' from different perspectives, i.e., from a non-profit research organisation to a syndicate of small and medium-sized companies and large companies. Lecturers from regulatory consultants, industry and research institutions described the innovation process and regulatory processes (e.g., 510K, PMA, combination product) towards market approval. The aim of the present article is to summarise and explain the main statements made during the symposium, in terms of challenges and opportunities for medical device industries, in a constantly changing customer and regulatory environment.

Guiding synovial inflammation by macrophage phenotype modulation: an in vitro study towards a therapy for osteoarthritis.

OBJECTIVE: The aims of this study were to modulate inflammation in synovial explants with the compounds: dexamethasone, rapamycin, bone morphogenetic protein 7 (BMP-7) and pravastatin, and to investigate the modulatory capacity of the compounds on specific macrophage phenotypes. DESIGN: Synovial explants from osteoarthritis (OA) patients were treated with 10(-6) M dexamethasone, 100 ng/mL rapamycin, 500 ng/mL BMP-7 or 50 µM pravastatin. Half of the explants were pre-stimulated with IFNγ + TNFα to simulate acute inflammation. Inflammatory state of the synovium was assessed with gene expression analysis. Primary human monocytes were isolated and stimulated towards macrophage phenotypes M(IFNγ + TNFα), M(IL-4) and M(IL-10) with the respective cytokines, followed by treatment with the compounds. RESULTS: Dexamethasone had an anti-inflammatory effect on IFNγ + TNFα stimulated and osteoarthritic synovium, likely due to suppression of pro-inflammatory M(IFNγ + TNFα) macrophages while enhancing anti-inflammatory M(IL4) and M(IL10) macrophages. Rapamycin and BMP-7 further enhanced inflammation in stimulated synovium, but rapamycin did not have a clear effect on non-stimulated synovium. Rapamycin suppressed M(IL-4) and M(IL-10) macrophages without affecting M(IFNγ + TNFα). BMP-7 suppressed M(IFNγ + TNFα) and enhanced M(IL-10) in the macrophage cultures. Pravastatin did not affect synovium, but enhanced M(IL-10). CONCLUSIONS: These data indicate that macrophage phenotype modulation can be used to guide joint inflammation and thereby contribute to the development of new therapies to delay the progression of OA. The varying effects of the compounds on synovium of different degrees of inflammation, indicate that the modulatory capacity of the compounds depends on OA stage and underlines the importance of identifying this stadium for adequate treatment.

Tissue integration and inflammatory reaction in full-thickness abdominal wall repair using an innovative composite mesh.

PURPOSE: When composite meshes are used in abdominal wall repair, seroma formation may persist and delay the desired integration leading to recurrence. This study compares tissue integration and inflammatory response in abdominal wall repair with composites with different absorbable synthetic barriers. METHODS: Full-thickness defects created in the abdominal wall of rabbits were repaired using polypropylene prosthesis or the following composites: Physiomesh™ (Phy); Ventralight™ (Vent) and "new composite mesh" (Ncm) not yet used clinically in humans. The collected seroma was evaluated for IFN-γ/IL-4 by ELISA. Tissue integration, anti- (IL-13/TGFß-1/IL-10/IL-4) and pro-inflammatory (TNF-α/IL-6/IFN-γ/VEGF) cytokine mRNA expression and TGFß/VEGF immunolabeling were evaluated at 14 and 90 days post-implant. RESULTS: Seroma was observed in 10 of 12 Phy/Vent and 4 of 12 Ncm. Wound fluid IFN-γ showed a time-dependent significant increase in Vent and tendency to decrease in Ncm, while all composites exhibited IL-4 upward trend. Prostheses were fully infiltrated by an organized connective tissue at end time although the area had shown prior seroma. A stable mesothelium was developed, except in adhesion areas. Vent/Phy displayed a significant increase in TNF-α/IFN-γ-mRNA over time. Significant decrease in VEGF mRNA was observed in Phy/Ncm, while a significant increase of TGFß-1 mRNA was evident in all composites over time. Ncm exhibited the highest TGFß protein expression area at short term and the greatest percentage of VEGF positive vessels at end time. CONCLUSION: Ncm could be an appropriate candidate to improve clinical outcome showing the lower development of seroma and optimal tissue integration with minimal pro-inflammatory cytokine response over time and consistent pro-wound healing cytokine expression.

Progressing innovation in biomaterials. From the bench to the bed of patients.

A Translational Research Symposium was organized at the 2014 annual meeting of the European society for biomaterials. This brought together leading Tier one companies in clinical biomaterials and medical device markets, small and medium enterprises and entrepreneurial academics who shared their experiences on taking biomaterials technologies to commercial endpoints, in the clinics. The symposium focused on "Progressing Innovation in Biomaterials. From the Bench to the Bed of Patients". The aim of the present document is to illustrate the content of the symposium and to highlight the key lessons from selected lectures.

Evaluation of in vivo properties of Velosorb™ fast versus Vicryl™ rapide in a functional rabbit model of intradermic suture and episiotomy.

OBJECTIVE: Fast-absorbing polyglactin 910 is commonly used to suture skin and vaginal incisions. In vitro studies have shown similar tensile strength properties between Velosorb™ Fast and Vicryl™ Rapide (Al-Qattan MM. J Hand Surg Br Eur. 2005;30(1):90-91). This randomized study compared Velosorb™ Fast (Covidien) with Vicryl™ Rapide (Ethicon) in a rabbit model of intradermic suture and episiotomy. MATERIALS AND METHODS: This randomized prospective study was performed on 20 New Zealand rabbits, in which we realized a mediolateral perineo-vaginal incision and two vertical skin incisions of about 8 cm on the abdominal wall. The sutures were randomized between Velosorb™ Fast (Covidien) and Vicryl™ Rapide (Ethicon), and each rabbit was treated with the same suture on both vaginal incision and left abdominal incision, while the right abdominal incision was closed with an alternate suture. A macroscopic examination was performed on days 5 and 11. On day 11, animals were sacrificed for histological (Badylak quantitative score) and electron microscopic examinations. Differences were considered significant at p < .05. RESULTS: All of the rabbits survived and were included in the final results. Fifty-one sutures were visible by histologic analysis (27 in the Velosorb™ Fast group and 24 in the Vicryl™ Rapide group). The power of the study was ≥80%. There was no significant difference between the two groups based on the total histologic Badylak score analysis or the Badylak sub-score analysis. CONCLUSIONS: Velosorb™ Fast seems to be as efficient as Vicryl™ Rapide for use in perineal and skin closure.

Intraperitoneal behaviour of a new composite mesh (Parietex™ Composite Ventral Patch) designed for umbilical or epigastric hernia repair.

INTRODUCTION: The most common treatment option for ventral and umbilical hernias is the implant of a prosthetic mesh. This study compares the behaviour of a new mesh, Parietex™ Composite Ventral Patch (Ptx), with two commercially available meshes, Ventralex™ ST Hernia Patch and Proceed™ Ventral Patch. MATERIALS AND METHODS: The following meshes were tested in a umbilical-hernia repair model using 54 rabbits: Ventralex™ ST Hernia Patch (Vent) (Bard Davol Inc., USA); Proceed™ Ventral Patch (PVP) (Ethicon, USA) and Ptx (Covidien, Sofradim, France) (n = 18 each). At 3, 7 and 14 days postimplantation, peritoneal behaviour and adhesion formation were assessed by sequential laparoscopy. Adhesions were scored for consistency and quantified by image analysis. The animals were euthanized at 2 (n = 27) and 6 weeks (n = 27) postsurgery. Mesothelial cover of meshes and tissue ingrowth were determined by scanning and light microscopy. RESULTS: Seroma was observed in 1/18 Vent, 7/18 PVP and 4/18 Ptx, mainly between the implant and subcutaneous tissue. Firm omental adhesions between the mesh and parietal peritoneum were noted in 2/9 Vent, 6/9 PVP and 3/9 Ptx at 2 weeks and in 3/9 Vent, 5/9 PVP and 1/9 Ptx at 6 weeks. Three (out of 9) encapsulated PVP implants showed "tissue-integrated" adhesions affecting the intestinal loops. No differences between implants were detected in the surface area occupied by adhesions at 2 weeks, though at 6 weeks, percentages were significantly higher (p < 0.01; Mann-Whitney U test) for PVP compared to Ptx or Vent. At this time point, Ptx and Vent showed good host tissue incorporation and optimal mesothelialization. CONCLUSIONS: The PVP implants showed greater adhesion formation than the other materials. Postimplantation behaviour was comparable for Ptx and Vent including scarce adhesion formation and optimal mesothelialization. Regarding tissue integration, Ptx showed greater long-term collagenization of the neoformed tissue.

In vitro model to study the biomaterial-dependent reaction of macrophages in an inflammatory environment.

BACKGROUND: Macrophages play an important role in the reaction to biomaterials, which sometimes have to be used in a surgical field at risk of contamination. The macrophage phenotype in reaction to biomaterials in an inflammatory environment was evaluated in both an in vivo and in vitro setting. METHODS: In the in vivo setting, polypropylene (PP) biomaterial was implanted for 28 days in the contaminated abdominal wall of rats, and upon removal analysed by routine histology as well as immunohistochemistry for CD68 (marker for macrophages), inducible nitric oxide synthase (iNOS - a marker for proinflammatory M1 macrophages) and CD206 (marker for anti-inflammatory M2 macrophages). For the in vitro model, human peripheral blood monocytes were cultured for 3 days on biomaterials made from PP, collagen (COL), polyethylene terephthalate (PET) and PET coated with collagen (PET+COL). These experiments were performed both with and without lipopolysaccharide and interferon γ stimulation. Secretion of both M1- and M2-related proteins was measured, and a relative M1/M2 index was calculated. RESULTS: In vivo, iNOS- and CD206-positive cells were found around the fibres of the implanted PP biomaterial. In vitro, macrophages on both PP and COL biomaterial had a relatively low M1/M2 index. Macrophages on the PET biomaterial had a high M1/M2 index, with the highest increase of M1 cytokines in an inflammatory environment. Macrophages on the PET+COL biomaterial also had a high M1/M2 index. CONCLUSION: Macrophages in an inflammatory environment in vitro still react in a biomaterial-dependent manner. This model can help to select biomaterials that are tolerated best in a surgical environment at risk of contamination.

A culture model to analyze the acute biomaterial-dependent reaction of human primary macrophages.

Macrophages are important in foreign body reactions. We devised a culture model with human primary macrophages to evaluate the acute response of macrophages to biomaterials. First we selected proteins representative for pro-inflammatory (M1) or anti-inflammatory/repair (M2) response of monocytes isolated from blood of healthy human donors by exposing them to LPS+IFNγ or IL-4. A relative M1/M2 index was calculated using IL-1ß, IL-6, tumor necrosis factor (TNF)α, monocyte chemotactic protein (MCP)-3 and macrophage inflammatory protein (MIP)-1α as M1 markers, and IL-1 receptor antagonist (IL-1RA), CCL18, regulated and normal T-cell expressed and secreted (RANTES), and macrophage-derived chemokine (MDC) as M2 markers. Then monocytes were cultured for 3days on 4 materials selected for known different foreign body reactions: Permacol™, Parietex™ Composite, multifilament polyethylene terephthalate and multifilament polypropylene. Macrophages on polypropylene produced high levels of anti-inflammatory proteins with a low M1/M2 index. Macrophages on Parietex™ Composite produced high levels of inflammatory and anti-inflammatory proteins, with a high M1/M2 index. Macrophages on polyethylene terephthalate also resulted in a high M1/M2 index. Macrophages on Permacol™ produced a low amount of all proteins, with a low M1/M2 index. This model with human primary macrophages and the panel of read-out parameters can be used to evaluate the acute reaction of macrophages to biomaterials in vitro to get more insight in the foreign body reaction.

In vitro activation of human leukocytes in response to contact with synthetic hernia meshes.

OBJECTIVES: Evaluation of an in vitro chemiluminescent screen to predict leukocyte ROS in response to surgical materials. DESIGN AND METHODS: 6 surgical meshes; manufacture and knitting variations of polypropylene (PP), polyester terephtalate (PET) and polyglycolic acid (PGA) trialled healthy human blood (n=5). Materials and blood were incubated with pholasin. Pholasin emits photons in the presence of reactive oxygen species; secreted by activated leukocytes. RESULTS: Multifilament-PGA mesh stimulated the greatest ROS response from blood derived human leukocytes. Multifilament-PET light weight and multifilament-PP meshes stimulated similar levels of ROS production which were greater than monofilament-PP light, monofilament-PP and monofilament-PET light meshes. Data demonstrated statistical variations in trans-donor response to the materials. CONCLUSIONS: An in vitro chemiluminescent assay can be used to assess leukocyte respiratory burst response to biomaterials. PGA mesh elicited the greatest ROS response. PP and PET monofilament meshes induce less ROS than multifilament equivalents. In vitro results correlate with previously published clinical responses to these materials.

Quantitative trait loci underlying milk production traits in sheep.

Improvement of milk production traits in dairy sheep is required to increase the competitiveness of the industry and to maintain the production of high quality cheese in regions of Mediterranean countries with less favourable conditions. Additional improvement over classical selection could be reached if genes with significant effects on the relevant traits were specifically targeted by selection. However, so far, few studies have been undertaken to detect quantitative trait loci (QTL) in dairy sheep. In this study, we present a complete genome scan performed in a commercial population of Spanish Churra sheep to identify chromosomal regions associated with phenotypic variation observed in milk production traits. Eleven half-sib families, including a total of 1213 ewes, were analysed following a daughter design. Genome-wise multi-marker regression analysis revealed a genome-wise significant QTL for milk protein percentage on chromosome 3. Eight other regions, localized on chromosomes 1, 2, 20, 23 and 25, showed suggestive significant linkage associations with some of the analysed traits. To our knowledge, this study represents the first complete genome scan for milk production traits reported in dairy sheep. The experiment described here shows that analysis of commercial dairy sheep populations has the potential to increase our understanding of the genetic determinants of complex production-related traits.

Quantitative trait loci underlying udder morphology traits in dairy sheep.

A genome scan was conducted on the basis of the daughter design to detect quantitative trait loci (QTL) influencing udder morphology traits in Spanish Churra dairy sheep. A total of 739 ewes belonging to 11 half-sib families were genotyped for 182 microsatellite markers covering 3,248.2 cM (Kosambi) of the ovine autosomal genome. Phenotypic traits included scores for 5 linear udder traits: udder depth, udder attachment, teat placement, teat size, and udder shape. Quantitative measurements for the QTL analysis were calculated for each trait from evaluation scores using within-family yield deviations corrected for fixed environmental effects. Joint analysis of all families using Haley-Knott regression identified 5 regions that exceeded the 5% chromosome-wise significance threshold on chromosomes 7, 14, 15, 20, and 26. Based on the across-family results, a within-family analysis was carried out to identify families segregated according to the QTL and to estimate the QTL effect. The allelic substitution effect for individual families ranged from 0.47 to 1.7 phenotypic standard deviation units for udder shape on chromosome 15 and udder depth on chromosome 14, respectively. These QTL regions provide a starting point for further research aimed at the characterization of genetic variability involved in udder traits in Churra sheep. This paper presents the first report of a sheep genome scan for udder-related traits in a dairy sheep outbred population.

A male linkage map constructed for QTL mapping in Spanish Churra sheep.

A male ovine linkage map has been constructed on the basis of 11 half-sib families of a commercial population of Spanish Churra sheep as part of a genome scan for quantitative trait loci mapping. A total of 1421 daughters and their sires were genotyped for 182 microsatellite markers evenly distributed along the ovine autosomes. A total of 259,192 genotypes were obtained, generating an average of 669 informative meioses per marker. An autosomal genome length of 3262 cM was estimated for the Churra population with a mean marker interval of 17.86 cM. Our map represents an approximate 90% coverage of the autosomal ovine genome and constitutes a useful tool for the genetic dissection of complex traits in this breed. General agreement was found between the Churra map and other published maps for sheep, despite certain length discrepancies.

Short communication: detection of quantitative trait loci influencing somatic cell score in Spanish Churra sheep.

Eleven half-sib ovine families, including 1,421 Spanish Churra ewes, were analyzed for 181 microsatellite markers spanning the entire autosomic ovine genome. Using a multimarker regression method, a daughter experimental design was used to identify putative quantitative trait loci (QTL) affecting the somatic cell score (SCS). Chromosome-wise significance thresholds were set empirically by permuting the phenotypic data. Marker order and genetic distances of the autosomic linkage map built for this commercial population were in accordance with the published ovine linkage map. An across-family association analysis revealed a region on chromosome 20 suggestive of evidence for a QTL. Segregation of the QTL into 2 families was inferred from the within-family analysis, and differences in the position of the suggested QTL were found between the 2 half-sib groups. This could be the result of incomplete information associated with the markers for the significant families. The location of the major histocompatibility complex in proximity to the across-family effect suggests this region may harbor a segregating QTL for the SCS in the Churra population. Studies in dairy cattle examining the SCS have reported linkage associations on corresponding bovine orthologous regions, supporting the validity of our findings.

Retinoid-related molecules require caspase 9 for the effective release of Smac and the rapid induction of apoptosis.

Certain retinoid-related molecules (RRMs) with agonist or antagonist activities have been described to induce apoptosis in a variety of cancer cell lines and show promise for the treatment of cancer. Similar to other chemotherapeutic drugs, these retinoid analogs have been suggested to induce apoptosis through the intrinsic pathway, which requires the release of cytochrome c from the mitochondria for the effective activation of caspase 9. Expression of a catalytically inactive form of caspase 9, which functions as a dominant negative mutant, inhibits the induction of DEVDase activity and nuclear fragmentation by selective RRMs. Whereas the RRMs could induce the release of cytochrome c in the absence of caspase 9 activity, the later is necessary for the effective release of Smac/Diablo from the mitochondria. Furthermore, overexpression of Bcl-2 or Bcl-X(L) also inhibits RRM-induced apoptosis. We demonstrate that activation of caspase 2 by the agonist MX2870-1 requires caspase 9 activity and is inhibited by Bcl-2 overexpression. In contrast, the antagonist MX781 induces cleavage of procaspase 2 upstream of mitochondria and independently of caspase 9. Thus, two retinoid analogs with unique characteristics activate two distinct apical caspases (2 or 9) to initiate apoptosis. In addition to caspase-mediated cell death, sustained exposure to the RRMs can also lead to loss of cell viability in cells lacking caspase 9 activity or in cells stimulated in the presence of the caspase inhibitor Z-VAD-fmk. Moreover, MX2870-1 and MX781 produce cell cycle arrest independently of caspase activity and the retinoid receptors.