Interfacial Activity of Lipoprotein (a) Isoforms with a Variable Number of Kringle IV Type 2 Repeats: A New Indicator of Cardiovascular Risk?

OBJECTIVE: Lipoprotein (a) [Lp(a)] is an LDL-like particle constituted by lipids, apolipoprotein B100 and apolipoprotein (a) [apo(a)], a multidomain glycoprotein whose molecular mass is dependent on the genetically encoded number of Kringle IV type 2 (KIV-2) repeats. Because Lp(a) isoforms have been associated with cardiovascular risk (CVR), we have investigated if their interfacial properties can contribute to distinguish between low and high-risk groups and thus be used as a new CVR indicator. METHODS: Four Lp(a) variants, each carrying a different apo(a) isoform (K20, K24, K25, and K29), were purified from plasma of homozygous donors and their interfacial properties characterized using ellipsometry and surface pressure techniques. RESULTS: Ellipsometry measurements revealed that these isoforms had a similar propensity to form adsorbed layers at hydrophobic-hydrophilic interfaces, but surface pressure enabled to clearly separate them into two groups: K20 and K24 on one side, and K25 and K29 on the other side. CONCLUSION: Though K24 and K25 differ only by a single KIV-2 domain, their sharp difference in surface pressure suggests a critical threshold between the two Lp(a) forms, providing insights into the use of condensed matter approaches to monitor CVR. Our findings may represent a new laboratory window to assist medical decisions and to develop precision medicine treatments, practices, and products for CVR, which can be extended to other cardiovascular disease conditions.

Protein Transport upon Advection at the Air/Water Interface: When Charge Matters.

The formation of dense protein interfacial layers at a free air-water interface is known to result from both diffusion and advection. Furthermore, protein interactions in concentrated phases are strongly dependent on their overall positive or negative net charge, which is controlled by the solution pH. As a consequence, an interesting question is whether the presence of an advection flow of water toward the interface during protein adsorption produces different kinetics and interfacial structure of the adsorbed layer, depending on the net charge of the involved proteins and, possibly, on the sign of this charge. Here we test a combination of the following parameters using ovalbumin and lysozyme as model proteins: positive or negative net charge and the presence or absence of advection flow. The formation and the organization of the interfacial layers are studied by neutron reflectivity and null-ellipsometry measurements. We show that the combined effect of a positive charge of lysozyme and ovalbumin and the presence of advection flow does induce the formation of interfacial multilayers. Conversely, negatively charged ovalbumin forms monolayers, whether advection flow is present or not. We show that an advection/diffusion model cannot correctly describe the adsorption kinetics of multilayers, even in the hypothesis of a concentration-dependent diffusion coefficient as in colloidal filtration, for instance. Still, it is clear that advection is a necessary condition for making multilayers through a mechanism that remains to be determined, which paves the way for future research.

Synthesis of calcium-deficient hydroxyapatite nanowires and nanotubes performed by template-assisted electrodeposition.

Hydroxyapatite (HA) has received much interest for being used as bone substitutes because of its similarity with bioapatites. In form of nanowires or nanotubes, HA would offer more advantages such as better biological and mechanical properties than conventional particles (spherical). To date, no study had allowed the isolated nanowires production with simultaneously well-controlled morphology and size, narrow size distribution and high aspect ratio (length on diameter ratio). So, it is impossible to determine exactly the real impact of particles' size and aspect ratio on healing responses of bone substitutes and characteristics of these ones; their biological and mechanical effects can never be reproducible. By the template-assisted pulsed electrodeposition method, we have for the first time succeeded to obtain such calcium-deficient hydroxyapatite (CDHA) particles in aqueous baths with hydrogen peroxide by both applying pulsed current density and pulsed potential in cathodic electrodeposition. After determining the best conditions for CDHA synthesis on gold substrate in thin films by X-ray diffraction (XRD) and Energy dispersive X-ray spectroscopy (EDX), we have transferred those conditions to the nanowires and nanotubes synthesis with high aspect ratio going until 71 and 25 respectively. Polycrystalline CDHA nanowires and nanotubes were characterized by Scanning electron microscopy (SEM) and Transmission electron microscopy (TEM). At the same time, this study enabled to understand the mechanism of nanopores filling in gold covered polycarbonate membrane: here a preferential nucleation on gold in membranes with 100 and 200 nm nanopores diameters forming nanowires whereas a preferential and randomly nucleation on nanopores walls in membranes with 400 nm nanopores diameter forming nanotubes.

Interfacial properties, film dynamics and bulk rheology: A multi-scale approach to dairy protein foams.

HYPOTHESIS: The effective contribution of interfacial properties to the rheology of foams is a source of many open questions. Film dynamics during topological T1 changes in foams, essentially studied for low molecular weight surfactants, and scarcely for proteins, could connect interfacial properties to protein foam rheology. EXPERIMENTS: We modified whey protein isolate (WPI), and its purified major protein ß-lactoglobulin (ß-lg) by powder pre-conditioning and dry-heating in order to obtain a broad variety of interfacial properties. We measured interfacial properties, film relaxation duration after a T1 event and bulk foam rheology. FINDINGS: We found that, for ß-lg, considered as a model protein, the higher the interfacial elastic modulus, the longer the duration of topological T1 changes and the greater the foam storage and loss moduli and the yield stress. However, in the case of the more complex WPI, these correlations were less clear. We propose that the presence in WPI of other proteins, lactose and minerals modify the impact of pre-conditioning and dry-heating on proteins and thereby, their behaviour at the interface and inside the liquid film.

Osmotic pressures of lysozyme solutions from gas-like to crystal states.

We obtained osmotic pressure data of lysozyme solutions, describing their physical states over a wide concentration range, using osmotic stress for pressures between 0.05 bar and about 40 bar and volume fractions between 0.01 and 0.61. The osmotic pressure vs. volume fraction data consist of a dilute, gas-phase regime, a transition regime with a high-compressibility plateau, and a concentrated regime where the system is nearly incompressible. The first two regimes are shifted towards a higher protein volume fraction upon decreasing the strength or the range of electrostatic interactions. We describe this shift and the overall shape of the experimental data in these two regimes through a model accounting for a steric repulsion, a short-range van der Waals attraction and a screened electrostatic repulsion. The transition is caused by crystallization, as shown by small-angle X-ray scattering. We verified that our data points correspond to thermodynamic equilibria, and thus that they consist of the reference experimental counterpart of a thermodynamic equation of state.

Moderate conformational impact of citrate on ovotransferrin considerably increases its capacity to self-assemble at the interface.

We have compared the behavior of ovotransferrin at the air-solution interface in the presence of a monovalent ion (acetate), or a divalent ion (citrate), the latter being known to induce conformational changes of this protein upon interaction with its iron-binding sites. We have characterised the adsorption layer at the air-water interface in terms of homogeneity, surface concentration excess and rheological properties at pH 4.0. Besides we have investigated the bulk conformation in the presence of the two anions. In the presence of citrate only, interfacial layers display well-defined domains of higher overall surface concentration suggesting multilayers adsorption. Citrate also induces higher helical content and stabilizes the protein against thermal denaturation. Hence we propose that these changes are involved in the propensity of ovotransferrin to self-assemble at the air-water interface resulting in thick and heterogeneous interfacial layer.

Structure and mechanical properties of spider silk films at the air-water interface.

The kinetics of adsorption of solubilized spider major ampullate (MA) silk fibers at the air-water interface and the molecular structure and mechanical properties of the interfacial films formed have been studied using various physical techniques. The data show that Nephila clavipes MA proteins progressively adsorb at the interface and ultimately form a highly cohesive thin film. In situ infrared spectroscopy shows that as soon as they reach the interface the proteins predominantly form ß sheets. The protein secondary structure does not change significantly as the film grows, and the amount of ß sheet is the same as that of the natural fiber. This suggests that the final ß-sheet content is mainly dictated by the primary structure and not by the underlying formation process. The measure of the shear elastic constant at low strain reveals a very strong, viscous, cohesive assembly. The ß sheets seem to form cross-links dispersed within an intermolecular network, thus probably playing a major role in the film strength. More importantly, the molecular weight seems to be a crucial factor because interfacial films made from the natural proteins are ~7 times stronger and ~3 times more viscous than those obtained previously with shorter recombinant proteins. Brewster angle microscopy at the air-water interface and transmission electron microscopy of transferred films have revealed a homogeneous organization on the micrometer scale. The images suggest that the structural assembly at the air-water interface leads to the formation of macroscopically solid and highly cohesive networks. Overall, the results suggest that natural spider silk proteins, although sharing similarities with recombinant proteins, have the particular ability to self-assemble into ordered materials with exceptional mechanical properties.

Mouse TSPO in a lipid environment interacting with a functionalized monolayer.

Translocator protein TSPO is a membrane protein highly conserved in evolution which does not belong to any structural known family. TSPO is involved in physiological functions among which transport of molecules such as cholesterol to form steroids and bile salts in mammalian cells. Membrane protein structure determination remains a difficult task and needs concomitant approaches (for instance X-ray- or Electron-crystallography and NMR). Electron microscopy and two-dimensional crystallization under functionalized monolayers have been successfully developed for recombinant tagged proteins. The difficulty comes from the detergent carried by membrane proteins that disrupt the lipid monolayer. We identified the best conditions for injecting the histidine tagged recombinant TSPO in detergent in the subphase and to keep the protein stable. Reconstituted recombinant protein into a lipid bilayer favors its adsorption to functionalized monolayers and limits the disruption of the monolayer by reducing the amount of detergent. Finally, we obtained the first transmission electron microscopy images of recombinant mouse TSPO negatively stained bound to the lipid monolayer after injection into the subphase of pre-reconstituted TSPO in lipids. Image analysis reveals that circular objects could correspond to an association of at least four monomers of mouse TSPO. The different amino acid compositions and the location of the polyhistidine tag between bacterial and mouse TSPO could account for the formation of dimer versus tetramer, respectively. The difference in the loop between the first and second putative transmembrane domain may contribute to distinct monomer interaction, this is supported by differences in ligand binding parameters and biological functions of both proteins.

Difference in lipid packing sensitivity of exchangeable apolipoproteins apoA-I and apoA-II: an important determinant for their distinctive role in lipid metabolism.

Exchangeable apolipoproteins A-I and A-II play distinct roles in reverse cholesterol transport. ApoA-I interacts with phospholipids and cholesterol of the cell membrane to make high density lipoprotein particles whereas apolipoprotein A-II interacts with high density lipoprotein particles to release apolipoprotein A-I. The two proteins show a high activity at the aqueous solution/lipid interface and are characterized by a high content of amphipathic α-helices built upon repetition of the same structural motif. We set out to investigate to what extent the number of α-helix repeats of this structural motif modulates the affinity of the protein for lipids and the sensitivity to lipid packing. To this aim we have compared the insertion of apolipoproteins A-I and A-II in phospholipid monolayers formed on a Langmuir trough in conditions where lipid packing, surface pressure and charge were controlled. We also used atomic force microscopy to obtain high resolution topographic images of the surface at a resolution of several nanometers and performed statistical image analysis to calculate the spatial distribution and geometrical shape of apolipoproteins A-I and A-II clusters. Our data indicate that apolipoprotein A-I is sensitive to packing of zwitterionic lipids but insensitive to the packing of negatively charged lipids. Interestingly, apolipoprotein A-II proved to be insensitive to the packing of zwitterionic lipids. The different sensitivity to lipid packing provides clues as to why apolipoprotein A-II barely forms nascent high density lipoprotein particles while apolipoprotein A-I promotes their formation. We conclude that the different interfacial behaviors of apolipoprotein A-I and apolipoprotein A-II in lipidic monolayers are important determinants of their distinctive roles in lipid metabolism.

Characterization of spindle checkpoint kinase Mps1 reveals domain with functional and structural similarities to tetratricopeptide repeat motifs of Bub1 and BubR1 checkpoint kinases.

Kinetochore targeting of the mitotic kinases Bub1, BubR1, and Mps1 has been implicated in efficient execution of their functions in the spindle checkpoint, the self-monitoring system of the eukaryotic cell cycle that ensures chromosome segregation occurs with high fidelity. In all three kinases, kinetochore docking is mediated by the N-terminal region of the protein. Deletions within this region result in checkpoint failure and chromosome segregation defects. Here, we use an interdisciplinary approach that includes biophysical, biochemical, cell biological, and bioinformatics methods to study the N-terminal region of human Mps1. We report the identification of a tandem repeat of the tetratricopeptide repeat (TPR) motif in the N-terminal kinetochore binding region of Mps1, with close homology to the tandem TPR motif of Bub1 and BubR1. Phylogenetic analysis indicates that TPR Mps1 was acquired after the split between deutorostomes and protostomes, as it is distinguishable in chordates and echinoderms. Overexpression of TPR Mps1 resulted in decreased efficiency of both chromosome alignment and mitotic arrest, likely through displacement of endogenous Mps1 from the kinetochore and decreased Mps1 catalytic activity. Taken together, our multidisciplinary strategy provides new insights into the evolution, structural organization, and function of Mps1 N-terminal region.

Strong improvement of interfacial properties can result from slight structural modifications of proteins: the case of native and dry-heated lysozyme.

Identification of the key physicochemical parameters of proteins that determine their interfacial properties is still incomplete and represents a real stake challenge, especially for food proteins. Many studies have thus consisted in comparing the interfacial behavior of different proteins, but it is difficult to draw clear conclusions when the molecules are completely different on several levels. Here the adsorption process of a model protein, the hen egg-white lysozyme, and the same protein that underwent a thermal treatment in the dry state, was characterized. The consequences of this treatment have been previously studied: net charge and hydrophobicity increase and lesser protein stability, but no secondary and tertiary structure modification (Desfougères, Y.; Jardin, J.; Lechevalier, V.; Pezennec, S.; Nau, F. Biomacromolecules 2011, 12, 156-166). The present study shows that these slight modifications dramatically increase the interfacial properties of the protein, since the adsorption to the air-water interface is much faster and more efficient (higher surface pressure). Moreover, a thick and strongly viscoelastic multilayer film is created, while native lysozyme adsorbs in a fragile monolayer film. Another striking result is that completely different behaviors were observed between two molecular species, i.e., native and native-like lysozyme, even though these species could not be distinguished by usual spectroscopic methods. This suggests that the air-water interface could be considered as a useful tool to reveal very subtle differences between protein molecules.

Fluid and condensed ApoA-I/phospholipid monolayers provide insights into ApoA-I membrane insertion.

Apolipoprotein A-I (ApoA-I) is a protein implicated in the solubilization of lipids and cholesterol from cellular membranes. The study of ApoA-I in phospholipid (PL) monolayers brings relevant information about ApoA-I/PL interactions. We investigated the influence of PL charge and acyl chain organization on the interaction with ApoA-I using dipalmitoyl-phosphatidylcholine, dioleoyl-phosphatidylcholine and dipalmitoyl-phosphatidylglycerol monolayers coupled to ellipsometric, surface pressure, atomic force microscopy and infrared (polarization modulation infrared reflection-absorption spectroscopy) measurements. We show that monolayer compressibility is the major factor controlling protein insertion into PL monolayers and show evidence of the requirement of a minimal distance between lipid headgroups for insertion to occur, Moreover, we demonstrate that ApoA-I inserts deepest at the highest compressibility of the protein monolayer and that the presence of an anionic headgroup increases the amount of protein inserted in the PL monolayer and prevents the steric constrains imposed by the spacing of the headgroup. We also defined the geometry of protein clusters into the lipid monolayer by atomic force microscopy and show evidence of the geometry dependence upon the lipid charge and the distance between headgroups. Finally, we show that ApoA-I helices have a specific orientation when associated to form clusters and that this is influenced by the character of PL charges. Taken together, our results suggest that the interaction of ApoA-I with the cellular membrane may be driven by a mechanism that resembles that of antimicrobial peptide/lipid interaction.

Unexpected differences in the behavior of ovotransferrin at the air-water interface at pH 6.5 and 8.0.

Adsorption of purified apo-ovotransferrin at the air-water interface was studied by ellipsometry, surface tension, polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and shear elastic constant measurements. No significant difference was observed between pH 6.5 and 8.0 as regards the final value of surface concentration and surface pressure. However at low concentration, a weak barrier to adsorption is evidenced at pH 6.5 and confirmed by PM-IRRAS measurements. At a pH where the protein net charge is negative (pH 8.0), the behavior of ovotransferrin at the air-water interface is more influenced by charge effects rather than bulk concentration effects. At this pH, the interface exhibits a low shear elastic constant and a spectral signature not usual for globular proteins.

Surface properties and conformation of Nephila clavipes spider recombinant silk proteins at the air-water interface.

The dragline fiber of spiders is composed of two proteins, the major ampullate spidroins I and II (MaSpI and MaSpII). To better understand the assembly mechanism and the properties of these proteins, the adsorption behavior of the recombinant proteins of the spider Nephila clavipes produced by Nexia Biotechnologies Inc. has been studied at the air-water interface using ellipsometry, surface pressure, rheological, and infrared measurements. The results show that the adsorption is more rapid and more molecules are present at the interface for MaSpII than for MaSpI. MaSpII has thus a higher affinity for the interface than MaSpI, which is consistent with its higher aggregation propensity in water. The films formed at the interface consist of networks containing a high content of intermolecular beta-sheets as revealed by the in situ polarization modulation infrared absorption reflection spectra. The infrared results further demonstrate that, for MaSpI, the beta-sheets are formed as soon as the proteins adsorb to the interface while for MaSpII the beta-sheet formation occurs more slowly. The amount of beta-sheets is lower for MaSpII than for MaSpI, most likely due to the presence of proline residues in its sequence. Both proteins form elastic films, but they are heterogeneous for MaSpI and homogeneous for MaSpII most probably as a result of a more ordered and slower aggregation process for MaSpII. This difference in their mechanism of assembly and interfacial behaviors does not seem to arise from their overall hydrophobicity or from a specific pattern of hydrophobicity, but rather from the longer polyalanine motifs, lower glycine content, and higher proline content of MaSpII. The propensity of both spidroins to form beta-sheets, especially the polyalanine blocks, suggests the participation of both proteins in the silk's beta-sheet crystallites.

Characterization of the tetratricopeptide-containing domain of BUB1, BUBR1, and PP5 proves that domain amphiphilicity over amino acid sequence specificity governs protein adsorption and interfacial activity.

The tetratricopeptide motif repeat (TPR) is an alpha-helix-turn-alpha-helix motif that typically mediates protein-protein and, in some cases, protein-lipid interactions. Because of its success, this motif has been preserved through evolution and can be identified in proteins of a wide range of functions in lower and higher organisms. The N-terminal region of BUB1, BUBR1, and protein phosphatase 5 (PP5) contains tandem arrangements of the TPR motif. BUB1 and BUBR1 are conserved multidomain protein kinases that play a key role in the mitotic checkpoint, the mechanism that ensures the synchrony of chromosome segregation. PP5 is an enzyme that targets a wide range of protein substrates including single transmembrane receptors and mammalian cryptochromes. The N-terminal TPR domain of PP5 regulates the activity of the C-terminal catalytic domain through direct interaction with protein and lipid molecules. We portray the biophysical and biochemical properties of the tandem arrangements of the TPR motif of BUB1, BUBR1, and PP5 using far-UV spectroscopy, solution X-ray scattering, null ellipsometry, surface rheology measurements, and Brewster angle microscopy (BAM) observations. We show that, despite the low amino acid sequence conservation and different function, the TPR motif repeats of the three proteins exhibit similar interfacial properties including adsorption kinetics, high surface activity, and the formation of stable, rigid films at the air/water interface. Our studies demonstrate that domain amphiphilicity is of higher importance than amino acid sequence specificity in the determination of protein adsorption and interfacial activity.

Surface rheology and adsorption kinetics reveal the relative amphiphilicity, interfacial activity, and stability of human exchangeable apolipoproteins.

Exchangeable apolipoproteins are located in the surface of lipoprotein particles and regulate lipid metabolism through direct protein-protein and protein-lipid interactions. These proteins are characterized by the presence of tandem repeats of amphiphatic alpha-helix segments and a high surface activity in monolayers and lipoprotein surfaces. A noteworthy aspect in the description of the function of exchangeable apolipoproteins is the requirement of a quantitative account of the relation between their physicochemical and structural characteristics and changes in the mesoscopic system parameters such as the maximum surface pressure and relative stability at interfaces. To comply with this demand, we set out to establish the relations among alpha-helix amphiphilicity, surface concentration, and surface rheology of apolipoproteins ApoA-I, ApoA-II, ApoC-I, ApoC-II, and ApoC-III adsorbed at the air-water interface. Our studies render further insights into the interfacial properties of exchangeable apolipoproteins, including the kinetics of their adsorption and the physical properties of the interfacial layer.

Interfacial properties of heat-treated ovalbumin.

The interfacial properties (kinetics of adsorption at the air/water interface, rheology of the interfacial layer) of ovalbumin molecules, unheated or previously heat-denatured in solution (10 g L(-1), pH 7, NaCl 50 mM) under controlled conditions (up to 40 min at 80 degrees C), were investigated. Heat treatments induced the formation of covalent aggregates which surface exhibits a higher hydrophobicity and an increased exposition of sulfhydryl groups when compared to native ovalbumin (unheated). Although they have a larger hydrodynamic size, aggregates adsorb as fast as native ovalbumin at the air/water interface. However, aggregates are able to established rapid contacts in the interfacial layer as shown by the fast increase of both surface pressure and shear elastic constant. In contrast, native ovalbumin needs longer time to developed intermolecular contacts and exhibits lower foam stability even if the shear elastic constant on aging reached higher value than for ovalbumin aggregates.

Binding of RPE65 fragments to lipid monolayers and identification of its partners by glutathione S-transferase pull-down assays.

RPE65 is the major component of the retinal pigment epithelium (RPE) microsomal membrane, and it plays a critical role in the binding of retinoids involved in the visual cycle. To understand how RPE65 binds to membranes, we have expressed and purified soluble fragments of human RPE65 fused to glutathione S-transferase (GST). The interaction between two fragments of RPE65 (F1 and F2 which include residues 1-125 and 126-250, respectively) and lipid monolayers has been studied by surface pressure, ellipsometry, and surface rheology measurements. Surface pressure and ellipsometry clearly showed a rapid adsorption of F2 to lipid monolayers whereas the kinetics of binding of F1 was much slower. Furthermore, the data suggest that the F2 fragment inserts into the lipid monolayer. Surface rheology showed a clear increase in monolayer rigidity only in the presence of F2, thereby demonstrating high intermolecular interactions of this fragment. This observation is further supported by the GST pull-down assays which demonstrated that F2 cosediments with full-length RPE65, suggesting that RPE65 has the propensity to form clusters or oligomers. The structure homology modeling of RPE65 based on a related family member, apocarotene 15',15'-oxygenase, further suggests that a hydrophobic patch located in the F2 region might be responsible for membrane binding. The present work shows that F2 interacts much stronger with lipid monolayers than does F1, which suggests that the region of RPE65 located between residues 126-250 should be very important for its membrane binding. Moreover, given that these fragments are not acylated, these data also suggest that an effective binding of RPE65 to membranes can be achieved without palmitoylation. Furthermore, GST pull-down assays also indicated that F2 interacts with 11-cis-retinol dehydrogenase, which supports previous data suggesting that it could act as a partner of RPE65.