RESUMO
The development of modern optoelectronic devices increases the need for lightweight and flexible transparent conductors. It is thus essential to develop new eco-friendly materials that can be easily processed for the fabrication of such devices. For this purpose, the synthesis of self-doped, highly conducting, transmissive, and water-processable polythiophene derivatives was performed via the direct heteroarylation polymerization method and a protection/deprotection strategy. Stable conductivities up to 1000 S cm-1 have been obtained. Champion materials (P1 and P7) were scaled and processed via the roll-to-roll compatible slot-die coating method to demonstrate their large area applicability. The best coated films exhibited optical transmittance greater than 79% at 550 nm with sheet resistances of 116 Ω â¡-1. These values are comparable to indium-tin oxide on plastic and thus present a viable alternative to metal oxide-based electrodes.
RESUMO
Narrow bandgap n-type organic semiconductors (n-OS) have attracted great attention in recent years as acceptors in organic solar cells (OSCs), due to their easily tuned absorption and electronic energy levels in comparison with fullerene acceptors. Herein, a new n-OS acceptor, Y5, with an electron-deficient-core-based fused structure is designed and synthesized, which exhibits a strong absorption in the 600-900 nm region with an extinction coefficient of 1.24 × 105 cm-1 , and an electron mobility of 2.11 × 10-4 cm2 V-1 s-1 . By blending Y5 with three types of common medium-bandgap polymers (J61, PBDB-T, and TTFQx-T1) as donors, all devices exhibit high short-circuit current densities over 20 mA cm-2 . As a result, the power conversion efficiency of the Y5-based OSCs with J61, TTFQx-T1, and PBDB-T reaches 11.0%, 13.1%, and 14.1%, respectively. This indicates that Y5 is a universal and highly efficient n-OS acceptor for applications in organic solar cells.
RESUMO
Direct Heteroarylation Polymerization (DHAP) is becoming a valuable alternative to classical polymerization methods being used to synthesize π-conjugated polymers for organic electronics applications. In previous work, we showed that theoretical calculations on activation energy (Ea) of the Câ»H bonds were helpful to rationalize and predict the selectivity of the DHAP. For readers' convenience, we have gathered in this work all our previous theoretical calculations on Ea and performed new ones. Those theoretical calculations cover now most of the widely utilized electron-rich and electron-poor moieties studied in organic electronics like dithienyl-diketopyrrolopyrrole (DT-DPP) derivatives. Theoretical calculations reported herein show strong modulation of the Ea of Câ»H bond on DT-DPP when a bromine atom or strong electron withdrawing groups (such as fluorine or nitrile) are added to the thienyl moiety. Based on those theoretical calculations, new cyanated dithienyl-diketopyrrolopyrrole (CNDT-DPP) monomers and copolymers were prepared by DHAP and their electro-optical properties were compared with their non-fluorinated and fluorinated analogues.
Assuntos
Cianatos/química , Pirróis/síntese química , Estrutura Molecular , Polimerização , Pirróis/química , Energia SolarRESUMO
Direct (hetero)arylation polymerization (DHAP) has emerged as a valuable and atom-economical alternative to traditional cross-coupling methods for the synthesis of low-cost and efficient conjugated polymers for organic electronics. However, when applied to the synthesis of certain (hetero)arene-based materials, a lack of C-H bond selectivity has been observed. To prevent such undesirable side-reactions, we report the design and synthesis of new, bulky, phosphine-based ligands that significantly enhance selectivity of the DHAP process for both halogenated and non-halogenated electron-rich and electron-deficient thiophene-based comonomers. To better understand the selectivity issues, density functional theory (DFT) calculations have been performed on various halogenated and non-halogenated electron-rich and electron-deficient thiophene-based comonomers. Calculations showed that the presence of bromine atoms decreases the energy of activation (Ea) of the adjacent C-H bonds, allowing undesirable ß-defects for some brominated aromatic units. Both calculations and the new ligands should lead to the rational design of monomers and methods for the preparation of defect-free conjugated polymers from DHAP.
RESUMO
Direct (hetero)arylation polymerization (DHAP) has recently been established as an environmentally benign method for the preparation of conjugated polymers. This synthetic tool features the formation of C-C bonds between halogenated (hetero)arenes and simple (hetero)arenes with active C-H bonds, thereby circumventing the preparation of organometallic derivatives and decreasing the overall production cost of conjugated polymers. Since its inception, selectivity and reactivity of DHAP procedures have been improved tremendously through the careful scrutinity of polymerization outcomes and the fine-tuning of reaction conditions. A broad range of monomers, from simple arenes to complex functionalized heteroarenes, can now be readily polymerized. The successful application of DHAP now leads to nearly defect-free conjugated polymers possessing comparable, if not slightly better, characteristics than their counterparts prepared using classical cross-coupling methods. This comprehensive review describes the mechanisms involved in this process from experimental and theoretical standpoints, presents an up-to-date compendium of materials obtained by this means, and exposes its current limitations and challenges.
RESUMO
Intrinsic traps in organic semiconductors can be eliminated by trap-filling with F4-TCNQ. Photovoltaic tests show that devices with F4-TCNQ at parts per thousand concentration outperform control devices due to an improved fill factor. Further studies confirm the trap-filling pathway and demonstrate the general nature of this finding.
RESUMO
The performance of organic photovoltaic devices (OPV) with nanostructured polymer:perylene diimide (PDI) photoactive layers approaches the levels of the corresponding polymer:fullerene systems. Nevertheless, a coherent understanding of the difficulty for PDI-based OPV devices to deliver high power conversion efficiencies remains elusive. Here we perform a comparative study of a set of four different polymer:PDI OPV model systems. The different device performances observed are attributed to differences in the nanostructural motif of these composites, as determined by wide-angle X-ray scattering (WAXS) measurements. Long-range structural order in the PDI domain dictates (i) the stabilization energy and (ii) the concentration of the PDI excimers in the composites. The quenching of the PDI excimer photoluminescence (PL) is found to be insensitive to the former, but it depends on the latter. High PL quenching occurs for the low concentration of PDI excimers that are formed in PDI columns with a length comparable to the PDI excimer diffusion length. The stabilization of the PDI excimer state increases as the long-range order in the PDI domains improves. The structural order of the PDI domains primarily affects charge transport. Electron mobility reduces as the size of the PDI domain increases, suggesting that well-ordered PDI domains suffer from poor electronic connectivity. WAXS further reveals the presence of additional intermolecular PDI interactions, other than the direct face-to-face intermolecular coupling, that introduce a substantial energetic disorder in the polymer:PDI composites. Conventional device architectures with hole-collecting ITO/PEDOT:PSS bottom electrodes are compared with inverted device architectures bearing bottom electron-collecting electrodes of ITO/ZnO. In all cases the ZnO-functionalized devices surpass the performance of the conventional device analogues. X-ray photoelectron spectroscopy explains that in PEDOT: PSS-functionalized devices, the PDI component preferentially segregates closer to the hydrophilic PEDOT: PSS electrode, thus impeding the efficient charge extraction and limiting device photocurrent.
RESUMO
Understanding charge separation and charge transport is crucial for improving the efficiency of organic solar cells. Their active media are based on organic molecules and polymers, serving as both light-absorbing and transport layers. The charge-transfer (CT) states play an important role, being intermediate for free carrier generation and charge recombination. Here, we use light-induced electron paramagnetic resonance spectroscopy to study the CT dynamics in blends of the polymers P3HT, PCDTBT, and PTB7 with the fullerene derivative C60-PCBM. Time-resolved EPR measurements show strong spin-polarization patterns for all polymer-fullerene blends, confirming predominant generation of singlet CT states and partial orientation ordering near the donor-acceptor interface. These observations allow a comparison with charge separation processes in molecular donor-acceptor systems and in natural and artificial photosynthetic assemblies, and thus the elucidation of the initial steps of sequential CT in organic photovoltaic materials.
Assuntos
Fulerenos/química , Fotossíntese , Polímeros/química , Espectroscopia de Ressonância de Spin Eletrônica , Transporte de Elétrons/efeitos da radiação , Estrutura Molecular , Teoria QuânticaRESUMO
The ongoing depletion of fossil fuels has led to an intensive search for additional renewable energy sources. Solar-based technologies could provide sufficient energy to satisfy the global economic demands in the near future. Photovoltaic (PV) cells are the most promising man-made devices for direct solar energy utilization. Understanding the charge separation and charge transport in PV materials at a molecular level is crucial for improving the efficiency of the solar cells. Here, we use light-induced EPR spectroscopy combined with DFT calculations to study the electronic structure of charge separated states in blends of polymers (P3HT, PCDTBT, and PTB7) and fullerene derivatives (C60-PCBM and C70-PCBM). Solar cells made with the same composites as active layers show power conversion efficiencies of 3.3% (P3HT), 6.1% (PCDTBT), and 7.3% (PTB7), respectively. Upon illumination of these composites, two paramagnetic species are formed due to photo-induced electron transfer between the conjugated polymer and the fullerene. They are the positive, P(+), and negative, P(-), polarons on the polymer backbone and fullerene cage, respectively, and correspond to radical cations and radical anions. Using the high spectral resolution of high-frequency EPR (130 GHz), the EPR spectra of these species were resolved and principal components of the g-tensors were assigned. Light-induced pulsed ENDOR spectroscopy allowed the determination of (1)H hyperfine coupling constants of photogenerated positive and negative polarons. The experimental results obtained for the different polymer-fullerene composites have been compared with DFT calculations, revealing that in all three systems the positive polaron is distributed over distances of 40-60 Å on the polymer chain. This corresponds to about 15 thiophene units for P3HT, approximately three units for PCDTBT, and about three to four units for PTB7. No spin density delocalization between neighboring fullerene molecules was detected by EPR. Strong delocalization of the positive polaron on the polymer donor is an important reason for the efficient charge separation in bulk heterojunction systems as it minimizes the wasteful process of charge recombination. The combination of advanced EPR spectroscopy and DFT is a powerful approach for investigation of light-induced charge dynamics in organic photovoltaic materials.
Assuntos
Fulerenos/química , Polímeros/química , Espectroscopia de Ressonância de Spin Eletrônica , Conversão Gênica , Compostos Organosselênicos/química , Energia SolarRESUMO
PBDTTPD is a conjugated polymer with high power conversion efficiency if used in organic solar cells together with fullerene derivatives. We have investigated for the first time the excited state dynamics of pristine PBDTTPD thin film as well as the ultrafast evolution of charge carriers in PBDTTPD:PCBM bulk heterojunction blend using femtosecond transient absorption spectroscopy. In the latter, charges appear within the time resolution of the experiment (<100 fs), but clean spectral signatures allowed to directly follow slower â¼1 ps charge separation. Only the slower quenching component competes with exciton-exciton and exciton-charge annihilation, leading to a reduced yield of charge carriers at high laser fluence. Our excellent measuring sensitivity made it possible to reduce pump power to a point where annihilation is quasi suppressed. In this case >80% of charges survive after 1 ns; the rest recombines (most probably geminately) on the 200 ps time scale.
RESUMO
A new alternating copolymer of dithienosilole and thienopyrrole-4,6-dione (PDTSTPD) possesses both a low optical bandgap (1.73 eV) and a deep highest occupied molecular orbital energy level (5.57 eV). The introduction of branched alkyl chains to the dithienosilole unit was found to be critical for the improvement of the polymer solubility. When blended with PC(71)BM, PDTSTPD exhibited a power conversion efficiency of 7.3% on the photovoltaic devices with an active area of 1 cm(2).
Assuntos
Compostos de Organossilício/química , Polímeros/química , Pirróis/química , Estrutura MolecularRESUMO
A new low-band-gap thieno[3,4-c]pyrrole-4,6-dione-based copolymer, PBDTTPD, has been designed and synthesized. PBDTTPD is soluble in chloroform or o-dichlorobenzene upon heating and shows a broad absorption in the visible region. The HOMO and LUMO energy levels were estimated to be at -5.56 and -3.75 eV, respectively. These electrochemical measurements fit well with an optical bandgap of 1.8 eV. When blended with PC(71)BM, this polymer demonstrated a power conversion efficiency of 5.5% in a bulk-heterojunction photovoltaic device having an active area of 1.0 cm(2).
RESUMO
World energy needs grow each year. To address global warming and climate changes the search for renewable energy sources with limited greenhouse gas emissions and the development of energy-efficient lighting devices are underway. This Review reports recent progress made in the synthesis and characterization of conjugated polymers based on bridged phenylenes, namely, poly(2,7-fluorene)s, poly(2,7-carbazole)s, and poly(2,7-dibenzosilole)s, for applications in solar cells and white-light-emitting diodes. The main strategies and remaining challenges in the development of reliable and low-cost renewable sources of energy and energy-saving lighting devices are discussed.