Separation of gold from irradiated actinide material utilizing a 2- thenoyltrifluoroacetone extraction resin.

Post-detonation nuclear forensics capabilities depend on the ability to rapidly isolate radionuclides to improve measurement quality. In this work an extraction chromatography resin was developed utilizing thenoyltrifluoroacetone and 1-octanol supported on Eichrom prefilter resin. The resin was tested in nitric and hydrochloric acid matrices. In nitric acid the resin was able to extract zirconium, while in hydrochloric acid matrices it was possible to extract iron and gallium. In all acid conditions tested, gold was retained but can be eluted from the column with 10 % thiourea.

Assessing Gas-Phase Ion Reactivity of 50 Elements with NO and the Direct Application for 239Pu in Complex Matrices Using ICP-MS/MS.

Understanding the reactivity of metal cations with various reaction gases in inductively coupled plasma tandem mass spectrometry (ICP-MS/MS) is important to determine the best gas to use for a given analyte/interference pair. In this study, nitric oxide (NO) was investigated as the reaction gas following previous experimental designs. The reactions with 50 elements were investigated to examine periodic trends in reactivity, validate theoretical modeling of reaction enthalpies as a method to screen reactant gases, and provide a baseline data set for potential in-line gas separation methods. ICP-MS/MS studies involving actinides are typically limited to Th, U, and Pu, with analyses of Np and Am rarely reported in the literature. To date, only two previous methods have investigated the use of NO in ICP-MS/MS analyses. To showcase the utility of NO, a method was developed to measure 239Pu in the presence of environmental matrix constituent and other actinides, like what could be expected from postdetonation debris, with no chemical separation prior to analysis. 239Pu+ was reacted to form 239Pu16O+, eliminating interferences derived from the sample matrix by measuring the 239Pu+ intensity at m/z = 255 (239Pu16O+). To validate NO for 238U1H+ interference removal in environmental matrices, standard reference materials were diluted to 1 mg/g of solution and spiked to 0.05 pg/g of 239Pu and 1 µg/g 238U (Pu/U = 5 × 10-8). Measured 239Pu concentrations were within 6% of the spiked value. These results demonstrate that reliable 239Pu measurements can be made at levels relevant to nuclear forensics without the need for extensive chemical matrix separation prior to analysis.

Focused ion beam for improved spatially-resolved mass spectrometry and analysis of radioactive materials for uranium isotopic analysis.

The ability to acquire high-quality spatially-resolved mass spectrometry data is sought in many fields of study, but it often comes with high cost of instrumentation and a high level of expertise required. In addition, techniques highly regarded for isotopic analysis applications such as thermal ionization mass spectrometry (TIMS) do not have the ability to acquire spatially-resolved data. Another drawback is that for radioactive materials, which are often of interest for isotopic analysis in geochemistry and nuclear forensics applications, high-end instruments often have restrictions on radioactivity and non-dispersibility requirements. We have applied the use of a traditional microanalysis tool, the focused ion beam/scanning electron microscope (FIB/SEM), for preparation of radioactive materials either for direct analysis by spatially-resolved instruments such as secondary ion mass spectrometry (SIMS) and laser ablation inductively-coupled mass spectrometry (LA-ICP-MS), or similarly to provide some level of spatial resolution to techniques that do not inherently have that ability such as TIMS or quadrupole inductively coupled plasma mass spectrometry (Q-ICP-MS). We applied this preparation technique to various uranium compounds, which was especially useful for reducing sample sizes and ensuring non-dispersibility to allow for entry into non-radiological or ultra-trace facilities. Our results show how this site-specific preparation can provide spatial context for nominally bulk techniques such as TIMS and Q-ICP-MS. In addition, the analysis of samples extracted from a uranium dioxide fuel pellet via all methods, but especially NanoSIMS and LA-ICP-MS, showed enrichment heterogeneities that are important for nuclear forensics and are of interest for fuel performance.