RESUMO
The first heteroditopic [2]rotaxane host systems capable of strong and selective binding of lithium chloride ion-pair species are described. Importantly, a cooperative 'switch on' mechanism was found to operate, in which complexation of a lithium metal cation enhances the halide anion affinity of the rotaxanes via a combination of favourable proximal electrostatic and preorganised allosteric effects. The mechanically bonded rotaxane host design features a macrocycle component possessing a 2,6-dialkoxy pyridyl cation binding motif and an isophthalamide anion binding group, as well as an axle component functionalised with either a halogen bonding (XB) iodotriazole or hydrogen bonding (HB) prototriazole moiety. Extensive quantitative 1H NMR titration studies in CD3CN/CDCl3 solvent mixtures determined enhanced ion-pair binding affinities for lithium halides over the corresponding sodium or potassium halide salts, with the axle prototriazole-containing HB rotaxane in particular demonstrating a marked selectivity for lithium chloride. Solid-state X-ray crystallographic studies and computational DFT investigations provide evidence for a [2]rotaxane host axle-separated ion-pair binding mode, in which complementary cation and anion binding motifs from both the macrocycle and axle components act convergently to recognise each of the charged guest species.
RESUMO
The synthesis and ion-pair binding properties of a heteroditopic [2]catenane receptor exhibiting highly potent and selective recognition of sodium halide salts are described. The receptor design consists of a bidentate halogen bonding donor motif for anion binding, as well as a di(ethylene glycol)-derived cation binding pocket which dramatically enhances metal cation affinity over previously reported homo[2]catenane analogues. 1H NMR cation, anion and ion-pair binding studies reveal significant positive cooperativity between the cation and anion binding events in which cation pre-complexation to the catenane subsequently 'switches-on' anion binding. Notably, the heteroditopic catenane displayed impressive selectivity for sodium halide recognition over the corresponding potassium halides. We further demonstrate that the catenane is capable of extracting solid alkali metal salts into organic media. Crucially, the observed solution phase binding selectivity for sodium halides translates to superior functional extraction capabilities of these salts relative to potassium halides, overcoming the comparatively higher lattice enthalpies NaX > KX dictated by the smaller alkali metal sodium cation. This is further exemplified in competitive solid-liquid experiments which revealed the exclusive extraction of sodium halide salts from solid mixtures of sodium and potassium halide salts.
RESUMO
Combining the potency of non-covalent halogen bonding (XB) with metal ion coordination, the synthesis and characterisation of a series of hydrophilic XB tripodal Cu(II) metallo-receptors, strategically designed for tetrahedral anion guest binding and sensing in aqueous media is described. The reported metallo-hosts contain a tripodal C3-symmetric tris-iodotriazole XB donor anion recognition motif terminally functionalised with tri(ethylene glycol) and permethylated ß-cyclodextrin functionalities to impart aqueous solubility. Optical UV-vis anion binding studies in combination with unprecedented quantitative EPR anion titration investigations reveal the XB Cu(II) metallo-receptors exhibit strong and selective phosphate recognition over a range of other monocharged anionic species in competitive aqueous solution containing 40% water, notably outperforming a hydrogen bonding (HB) Cu(II) metallo-receptor counterpart. Electrochemical studies demonstrate further the capability of the metallo-receptors to sense anions via significant cathodic perturbations of the respective Cu(II)/Cu(I) redox couple.
RESUMO
Two novel aza-BODIPY based anion sensors, decorated with halogen bonding recognition sites, are capable of detecting halide anions at biologically-relevant near-IR wavelengths. With potential application for improving the selectivity of photodynamic therapy agents, unprecedented supramolecular host-guest anion binding-modulated singlet oxygen generation is demonstrated.
RESUMO
The first example of a heteroditopic receptor capable of cooperative recognition and extraction of ammonium salt (NH4X) ion-pairs is described. Consisting of a bidentate 3,5-bis-tellurotriazole chalcogen bond donor binding cleft, the appendage of benzo-15-crown-5 (B15C5) substituents to the tellurium centres facilitates binding of the ammonium cation via a co-facial bis-B15C5 sandwich complex, which serves to switch on chalcogen bonding-mediated anion binding potency. Extensive quantitative ion-pair recognition 1H NMR titration studies in CD3CN/CDCl3 (1 : 1, v/v) solvent media reveal impressive ion-pair binding affinities towards a variety of ammonium halide, nitrate and thiocyanate salts, with the heteroditopic receptor displaying notable ammonium halide salt selectivity. The prodigious solution phase NH4X recognition also translates to efficient solid-liquid and liquid-liquid extraction capabilities.
RESUMO
Anion recognition is pertinent to a range of environmental, medicinal and industrial applications. Recent progress in the field has relied on advances in synthetic host design to afford a broad range of potent recognition motifs and novel supramolecular structures capable of effective binding both in solution and at derived molecular films. However, performance in aqueous media remains a critical challenge. Understanding the effects of bulk and local solvent on anion recognition by host scaffolds is imperative if effective and selective detection in real-world media is to be viable. This Review seeks to provide a framework within which these effects can be considered both experimentally and theoretically. We highlight proposed models for solvation effects on anion binding and discuss approaches to retain strong anion binding in highly competitive (polar) solvents. The synthetic design principles for exploiting the aforementioned solvent effects are explored.
RESUMO
The first example of a [2]rotaxane shuttle capable of selective optical sensing of chloride anions over other halides is reported. The rotaxane was synthesised via a chloride ion template-directed cyclisation of an isophthalamide macrocycle around a multi-station axle containing peripheral naphthalene diimide (NDI) stations and a halogen bonding (XB) bis(iodotriazole) based station. Proton NMR studies indicate the macrocycle resides preferentially at the NDI stations in the free rotaxane, where it is stabilised by aromatic donor-acceptor charge transfer interactions between the axle NDI and macrocycle hydroquinone moieties. Addition of chloride ions in an aqueous-acetone solvent mixture induces macrocycle translocation to the XB anion binding station to facilitate the formation of convergent XBâ â â Cl- and hydrogen bonding HBâ â â Cl- interactions, which is accompanied by a reduction of the charge-transfer absorption band. Importantly, little to no optical response was induced by addition of bromide or iodide to the rotaxane, indicative of the size discriminative steric inaccessibility of the interlocked cavity to the larger halides, demonstrating the potential of using the mechanical bond effect as a potent strategy and tool in chloride-selective chemo-sensing applications in aqueous containing solvent environments.
RESUMO
The ubiquity of charged species in biological and industrial processes has resulted in ever-increasing interest in their selective recognition, detection, and environmental remediation. Building on the established coordination chemistry principles of the chelate and macrocyclic effects, and host preorganization, supramolecular chemists seek to construct specific 3D binding cavities reminiscent of biotic systems to enhance host-guest binding affinity and selectivity. Mechanically interlocked molecules (MIMs) present a wholly unique platform for synthetic host design, wherein topologies afforded by the mechanical bond enable the decoration of 3D cavities for non-covalent interactions with a range of target guest geometries. Notably, MIM host systems exhibit mechanical bond effect augmented affinities and selectivities for a variety of charged guest species, compared to non-interlocked acyclic and macrocycle host analogs. Furthermore, the modular nature of MIM synthesis facilitates incorporation of optical and electrochemical reporter groups, enabling fabrication of highly sensitive and specific molecular sensors. This review discusses the development of recognition and sensing MIMs, from the first reports in the late 20th century through to the present day, delineating how their topologically preorganized and dynamic host cavities enhance charged guest recognition and sensing, demonstrating the mechanical bond effect as a potent tool in future chemosensing materials.
RESUMO
The anion recognition and electrochemical anion-sensing properties of halogen-bonding (XB) tripodal zinc(II) receptors strategically designed and constructed for tetrahedral anion guest binding are described. The XB tris(iodotriazole)-containing hosts exhibit high affinities and selectivities for inorganic phosphate over other more basic, mono-charged oxoanions such as acetate and the halides in a competitive CD3 CN/D2 O (9 : 1 v/v) aqueous solvent mixture. 1 Hâ NMR anion binding and electrochemical voltammetric anion sensing studies with redox-active ferrocene functionalised metallo-tripodal receptor analogues, reveal each of the XB tripods as superior anion complexants when compared to their tris(prototriazole)-containing, hydrogen bonding (HB) counterparts, not only exemplifying the halogen bond as a strong alternative interaction to the traditional hydrogen bond for molecular recognition but also providing rare evidence of the ability of XB receptors to preferentially bind the "harder" phosphate oxoanion over the "softer" and less hydrated halides in aqueous containing media.
RESUMO
Anion sensing via either optical or electrochemical readouts has separately received enormous attention, however, a judicious combination of the advantages of both modalities remains unexplored. Toward this goal, we herein disclose a series of novel, redox-active, fluorescent, halogen bonding (XB) and hydrogen bonding (HB) BODIPY-based anion sensors, wherein the introduction of a ferrocene motif induces remarkable changes in the fluorescence response. Extensive fluorescence anion titration, lifetime and electrochemical studies reveal anion binding-induced emission modulation through intramolecular photoinduced electron transfer (PET), the magnitude of which is dependent on the nature of both the XB/HB donor and anion. Impressively, the XB sensor outperformed its HB congener in terms of anion binding strength and fluorescence switching magnitude, displaying significant fluorescence turn-OFF upon anion binding. In contrast, redox-inactive control receptors display a turn-ON response, highlighting the pronounced impact of the introduction of the redox-active ferrocene on the optical sensing performance. Additionally, the redox-active ferrocene motif also serves as an electrochemical reporter group, enabling voltammetric anion sensing in competitive solvents. The combined advantages of both sensing modalities were further exploited in a novel, proof-of-principle, fluorescence spectroelectrochemical anion sensing approach, enabling simultaneous and sensitive read out of optical and electrochemical responses in multiple oxidation states and at very low receptor concentration.
RESUMO
Despite their hydrophobic surfaces with localized π-holes and rigid well-defined architectures providing a scaffold for preorganizing binding motifs, fullerenes remain unexplored as potential supramolecular host platforms for the recognition of anions. Herein, we present the first example of the rational design, synthesis, and unique recognition properties of novel fullerene-functionalized halogen-bonding (XB) heteroditopic ion-pair receptors containing cation and anion binding domains spatially separated by C60. Fullerene spatial separation of the XB donors and the crown ether complexed potassium cation resulted in a rare example of an artificial receptor containing two anion binding sites with opposing preferences for hard and soft halides. Importantly, the incorporation of the C60 motif into the heteroditopic receptor structure has a significant effect on the halide binding selectivity, which is further amplified upon K+ cation binding. The potassium cation complexed fullerene-based receptors exhibit enhanced selectivity for the soft polarizable iodide ion which is assisted by the C60 scaffold preorganizing the potent XB-based binding domains, anion-π interactions, and the exceptional polarizability of the fullerene moiety, as evidenced from DFT calculations. These observations serve to highlight the unique properties of fullerene surfaces for proximal charged guest binding with potential applications in construction of selective molecular sensors and modulating the properties of solar cell devices.
RESUMO
Ammonium-dibenzo[24]crown-8 [2]catenane functionalisation of a 3,5-bis-iodotriazole-pyridine motif produces a potent halogen bonding (XB) receptor capable of binding anions in aqueous-acetone solvent mixtures of up to 20% water. Exploiting the kinetically inert nature of the mechanically bonded cationic ammonium [2]catenane substituents, the XB receptor is demonstrated to exhibit superior anion recognition behaviour in comparison to labile sodium cation complexed bis-benzo[15]crown-5 XB and HB triazole-pyridine heteroditopic receptor analogues.
RESUMO
The first examples of [2]catenanes capable of selective anion transport across a lipid bilayer are reported. The neutral halogen bonding (XB) [2]catenanes were prepared via a chloride template-directed strategy in an unprecedented demonstration of using XBâ â â anion interactions to direct catenane assembly from all-neutral components. Anion binding experiments in aqueous-organic solvent media revealed strong halide over oxoanion selectivity, and a marked enhancement in the chloride and bromide affinities of the catenanes relative to their constituent macrocycles. The catenanes additionally displayed an anti-Hofmeister binding preference for bromide over the larger iodide anion, illustrating the efficacy of employing sigma-hole interactions in conjunction with the mechanical bond effect to tune receptor selectivity. Transmembrane anion transport studies conducted in POPC LUVs revealed that the catenanes were more effective anion transporters than the constituent macrocycles, with high chloride over hydroxide selectivity, which is critical to potential therapeutic applications of anionophores. Remarkably these outperform existing acyclic halogen bonding anionophores with regards to this selectivity. Record chloride over nitrate anion transport selectivity was also observed. This represents a rare example of the direct translation of intrinsic anion binding affinities to anion transport behaviour, and demonstrates the key role of the catenane mechanical bond effect for enhanced anion transport selectivity.
RESUMO
We describe the use of the cyaphide-azide 1,3-dipolar cycloaddition reaction for the synthesis of a new class of inorganic rotaxanes containing gold(I) triazaphosphole stoppers. Electron-deficient bis-azides, which thread perethylated pillar[5]arene in aromatic solvents, readily react with two equivalents of Au(IDipp)(CP) (IDipp=1,3-bis-(2,6-diisopropylphenyl)-imidazol-2-ylidene) to afford interlocked molecules via an inorganic click reaction. These transformations proceed in good yields (ca. 65 %) and in the absence of a catalyst. The resulting organometallic rotaxanes are air- and moisture-stable and can be purified by column chromatography under aerobic conditions. The targeted rotaxanes were characterized by multi-element nuclear magnetic resonance (NMR) spectroscopy, mass-spectrometry, and single-crystal X-ray diffraction.
RESUMO
A series of squaramide-based heteroditopic [2]rotaxanes consisting of isophthalamide macrocycle and squaramide axle components are synthesized using an alkali metal cation template-directed stoppering methodology. This work highlights the unprecedented sodium cation template coordination of the Lewis basic squaramide carbonyls for interlocked structure synthesis. Extensive quantitative 1 Hâ NMR spectroscopic anion and ion-pair recognition studies reveal the [2]rotaxane hosts are capable of cooperative sodium halide ion-pair mechanical bond axle-macrocycle component recognition, eliciting up to 20-fold enhancements in binding strengths for bromide and iodide, wherein the Lewis basic carbonyls and Lewis acidic NH hydrogen bond donors of the squaramide axle motif operate as cation and anion receptive sites simultaneously in an ambidentate fashion. Notably, varying the length and nature of the polyether cation binding unit of the macrocycle component dramatically influences the ion-pair binding affinities of the [2]rotaxanes, even overcoming direct contact NaCl ion-pair binding modes in polar organic solvents. Furthermore, the cooperative ion-pair binding properties of the squaramide-based heteroditopic [2]rotaxanes are exploited to successfully extract solid sodium halide salts into organic media.
RESUMO
Several examples of the cyaphide-azide 1,3-dipolar cycloaddition reaction to afford metallo-triazaphospholes are reported. The gold(I) triazaphospholes Au(IDipp)(CPN3 R) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene; R=t Bu, Ad, Dipp), magnesium(II) triazaphospholes, {Mg(Dipp NacNac)(CPN3 R)}2 (Dipp NacNac=CH{C(CH3 )N(Dipp)}2 , Dipp=2,6-diisopropylphenyl; R=t Bu, Bn), and germanium(II) triazaphosphole Ge(Dipp NacNac)-(CPN3 t Bu) can be prepared straightforwardly, under mild conditions and in good yields, in a manner reminiscent of the classic alkyne-azide click reaction (albeit without a catalyst). This reactivity can be extended to compounds with two azide functional groups such as 1,3-diazidobenzene. It is shown that the resulting metallo-triazaphospholes can be used as precursors to carbon-functionalized species, including protio- and iodo-triazaphospholes.
RESUMO
A series of heteroditopic halogen bonding (XB) [2]rotaxanes were prepared via a combination of passive and active metal template-directed strategies. The ability of the [2]rotaxanes to bind alkali metal halide ion-pairs was investigated by extensive 1 Hâ NMR titration studies, wherein detailed analysis of cation, anion and ion-pair affinity measurements indicate dramatic positive cooperative enhancements in halide anion association upon either Na+ or K+ pre-complexation. This study demonstrates that careful consideration of multiple, parallel and competing binding equilibria is essential when interpreting observed 1 Hâ NMR spectral changes in ion-pair receptor systems, especially those which exhibit dynamic behaviour. Importantly, in comparison to XB [2]catenane analogues, these neutral XB heteroditopic [2]rotaxane host systems demonstrated that despite their relatively weaker cation and anion binding affinities, they exhibit a notably higher level of positive cooperativity for alkali metal halide ion-pair binding, highlighting the role of greater co-conformational adaptive behaviour in mechanically-bonded hosts for the purposes of charged species recognition.
RESUMO
A series of dynamic metalloporphyrin [2]rotaxane molecular shuttles comprising of bis-functionalised Zn(II) porphyrin axle and pyridyl functionalised macrocycle components are prepared in high yield via active metal template synthetic methodology. Extensive variable temperature 1 Hâ NMR and quantitative UV-Vis spectroscopic titration studies demonstrate dynamic macrocycle translocation is governed by an inter-component co-ordination interaction between the macrocycle pyridyl and axle Zn(II) metalloporphyrin, which serves to bias a 'resting state' co-conformation. The dynamic shuttling behaviour of the interlocked structures is dramatically inhibited by the addition of a neutral Lewis base such as pyridine, but can also be tuned via post-synthetic rotaxane demetallation of the porphyrin axle core to give free-base, or upon subsequent metallation, Ni(II) [2]rotaxane analogues. Importantly, the Lewis acidic Zn(II) porphyrin axle component is also capable of coordinating anions which induces mechanical bond shuttling behaviour resulting in a novel optical sensing response.
Assuntos
Metaloporfirinas , Porfirinas , Rotaxanos , Modelos Moleculares , Rotaxanos/química , Bases de Lewis , Ânions/químicaRESUMO
Mimicking Nature's polymeric protein architectures by designing hosts with binding cavities screened from bulk solvent is a promising approach to achieving anion recognition in competitive media. Accomplishing this, however, can be synthetically demanding. Herein we present a synthetically tractable approach, by directly incorporating potent supramolecular anion-receptive motifs into a polymeric scaffold, tuneable through a judicious selection of the co-monomer. A comprehensive analysis of anion recognition and sensing is demonstrated with redox-active, halogen bonding polymeric hosts. Notably, the polymeric hosts consistently outperform their monomeric analogues, with especially large halide binding enhancements of ca. 50-fold observed in aqueous-organic solvent mixtures. These binding enhancements are rationalised by the generation and presentation of low dielectric constant binding microenvironments from which there is appreciable solvent exclusion.
RESUMO
The first examples of halogen bonding (XB) heteroditopic homo[2]catenanes were prepared by discrete Na+ template-directed assembly of oligo(ethylene glycol) units derived from XB donor-containing macrocycles and acyclic bis-azide precursors, followed by a CuI -mediated azide-alkyne cycloaddition macrocyclisation reaction. Extensive 1 Hâ NMR spectroscopic studies show the [2]catenane hosts exhibit positive cooperative ion-pair recognition behaviour, wherein XB-mediated halide recognition is enhanced by alkali metal cation pre-complexation. Notably, subtle changes in the catenanes' oligo(ethylene glycol) chain length dramatically alters their ion-binding affinity, stoichiometry, complexation mode, and conformational dynamics. Solution-phase and single-crystal X-ray diffraction studies provide evidence for competing host-separated and direct-contact ion-pair binding modes. We further demonstrate the [2]catenanes are capable of extracting solid alkali-metal halide salts into organic media.