RESUMO
The variation in the surface quality of microarray plates was examined by measuring the contact angles of 480 droplets on five microarray plates. It was found that the measured contact angle did not accurately predict the droplet shape for moderate Bond numbers (~0.5 ≤ N(B) ≤ 5). By defining an apparent contact angle using the ratio of the contact radius to the height, the variance in the predicted interface shape decreased by greater than a factor of 3 for both local and globally averaged characteristics. The error in the predicted droplet height was also reduced by 3 orders of magnitude.
Assuntos
Análise em Microsséries/métodos , Propriedades de SuperfícieRESUMO
Explicit analytical models that describe the capillary force on confined droplets actuated in electrowetting on dielectric devices and the reduction in that force by contact angle hysteresis as a function of the three-dimensional shape of the droplet interface are presented. These models are used to develop an analytical model for the transient position and velocity of the droplet. An order of magnitude analysis showed that droplet motion could be modeled using the driving capillary force opposed by contact angle hysteresis, wall shear, and contact line friction. Droplet dynamics were found to be a function of gap height, droplet radius, surface tension, fluid density, the initial and deformed contact angles, contact angle hysteresis, and friction coefficients pertaining to viscous wall friction and contact line friction. The first four parameters describe the device geometry and fluid properties; the remaining parameters were determined experimentally. Images of the droplet during motion were used to determine the evolution of the shape, position, and velocity of the droplet with time. Comparisons between the measured and predicted results show that the proposed model provides good accuracy over a range of practical voltages and droplet aspect ratios.
