Antifungal Activity and Stability of Fluconazole Emulsion Containing Ionic Liquids Explained by Intermolecular Interactions.

This research reports accelerated stability experiments, the evaluation of intermolecular interactions, and antifungal assays for fluconazole emulsions prepared using ultrasound (US) and magnetic stirring (MS) in the presence of ionic liquids derived from 1,n-(3-methylimidazolium-1-yl)alkane bromide ([CnMIM]Br; n = 12 or 16). The goals of the investigation are to quantify the stability, identify the forces that drive the formation and stability, and determine the antifungal activity of fluconazole-containing emulsions, and corroborate the data from our previous results that indicated that the emulsion based on [C16MIM]Br seemed to be more stable. In this study, accelerated stability experiments evidenced a considerable stability for the [C16MIM]Br emulsions at two temperatures (25 and 37 °C)­the instability index increased in the following order: US40% < US20% < MS. The 1H NMR data showed that the ILs interacts differently with medium-chain triglycerides (MCT). Two distinct interaction mechanisms were also observed for [C12MIM]Br and [C16MIM]Br with fluconazole, in which the latter formed more compact mixed aggregates than the former. The result was corroborated by diffusion data, which showed that ILs suffered a decrease in diffusion in the presence of fluconazole. The antifungal assay showed that emulsions containing ILs displayed superior activity compared with fluconazole alone. The emulsions also showed potent activity in inhibiting a resistant species (C. glabrata­CG34) to FLZ. All emulsions showed weak irritant potential in HET-CAM assay.

Supramolecular Similarity in Polymorphs: Use of Similarity Indices (IX).

A systematic investigation to assess the degree of similarity between polymorphs was carried out. A similarity indices (IX) approach was applied in ten series of polymorphs with different characteristics and number of molecules in the asymmetric unit. Geometric (ID), contact area (IC), and stabilization energy (IG) parameters were used. It was possible to situate each comparison in different regions of similarity within the polymorphism phenomenon and determine the boundaries between quasi-isostructural polymorphs and polymorphs of low similarity. The multiparameter IDCG index was used as a robust tool to determine the total similarity within the polymorphism phenomenon. The highest contribution of the stabilization energy parameter (45%) toward the final value of similarity (IDCG) was observed, followed by the contact area index (32%). The geometric index contributed approximately 23% to the final value of IDCG. This information reinforces the importance of the contact area and stabilization energy in assessing the degree of similarity between crystalline structures. A new descriptor (IQ) based on the comparison of the energetic contribution of intermolecular interaction types present in each crystal structure is presented. IQ can be a versatile tool and applicable even for systems that do not share any similarity.

Effect of slight structural changes on the gelation properties of N-phenylstearamide supramolecular gels.

Supramolecular gels present several applications in which the gelator properties are closely dependent on their structure and solvent. Despite this, there are few studies on the effect of the gelation ability of gelators with slight molecular changes. Therefore, N-arylestearamides (in which aryl = phenyl (1), 4-tolyl (2) and 4-acetylphenyl (3)) were evaluated in different solvents. The critical gelefication concentration (CGC) values indicated that the substituents can significantly affect the concentration at which the supramolecular gels are formed, mainly in non-aromatic solvents (e.g. cyclohexane, acetonitrile and DMSO). From UV-Vis and DSC data, we verified that the gel-sol and sol-gel transitions (Tgel-sol and Tsol-gel) increase in the order of 1 < 2 < 3. Organogel strength was evaluated for 1-3 as a function of concentration and solvent type using rheology data. Gel strength is concentration-dependent and a strength order was found in acetonitrile, cyclohexane and DMSO, in which: 1 ∼ 2 > 3. Dynamic viscoelastic measurements as a function of temperature sweeps indicate a predominantly enthalpic contribution to the elasticity of the organogels formed from 1-3. Temperature-dependent 1H NMR indicates that NHO interactions may be responsible for the molecular association of molecules into 1D fibers, while 3D fibers were formed from van der Waals interactions.

Impact of Anions on the Partition Constant, Self-Diffusion, Thermal Stability, and Toxicity of Dicationic Ionic Liquids.

Partition constants (KD°), molecular dynamics (T1, T2, and DOSY measurements), thermal stability, and toxicity of dicationic ionic liquids (ILs) were determined. The dicationic ILs derived from 1,n-bis(3-methylimidazolim-1-yl)octane, [BisOct(MIM)2][2X] (in which X = Cl, Br, NO3, SCN, BF4, and NTf2), were evaluated to verify the influence of anion structure on the IL properties. A monocationic IL [Oct(MIM)][Br] was also monitored for comparison. In general, the solubility of the ILs followed the anion free energy of hydration (ΔG°hyd). The thermokinetic and thermodynamic functions of activation of the ILs were determined via thermogravimetric data, and it was observed that polyatomic anions influence the decomposition mechanism of these IL structures. Furthermore, [Oct(MIM)][Br] had a decomposition rate greater than that of the dicationic analogue, and the thermodynamic parameters of activation data corroborate these results. Finally, the dicationic ILs did not indicate toxic effects (LD50 > 40 mM).

Heteroassembly Ability of Dicationic Ionic Liquids and Neutral Active Pharmaceutical Ingredients.

Extensive investigation of interactions and aggregation properties of IL + API systems is necessary to apply ionic liquids (ILs) with different hydrophobic characteristics to drug delivery or in active pharmaceutical ingredient (API) formulations. Therefore, this study aims to investigate the heteroassembly between dicationic ILs ([BisOct(MIM)2][2X], in which X is Br or BF4, and [BisOct(BnIM)2][2Br]), both in the absence and the presence of neutral APIs (salicylic acid, ibuprofen, and paracetamol) with different functional groups. Isothermal titration calorimetry results demonstrate that IL-API associations occur at very low concentrations of IL. These results were reinforced by electrospray ionization mass spectrometry with variable collision-induced dissociation, in which the IL dication interactions with APIs were detected. The strength of the dication-API interaction was determined from E cm,1/2 data. The aggregation parameters (cac, ΔG agg °, and K) between ILs and APIs were evaluated by conductivity. The 1H NMR data showed that differences in chemical shifts provided relevant insights about interaction sites in both components.

Insights on the Similarity of Supramolecular Structures in Organic Crystals Using Quantitative Indexes.

The quest for concepts of isostructurality in organic crystals has been long and mostly based on geometric data, even with the development of modern software. This field of study is of great interest to the pharmaceutical industry and for the prediction of crystal structures. Despite this, there is still no methodology that provides broad quantitative and comparable similarity data between two complete crystalline structures. The present study demonstrated that the similarity between two crystalline structures could be estimated from the similarity between the two "supramolecular clusters". Quantitative indexes for similarity comparisons of crystal structures were shown using nine 5-aryl-1-(1,1-dimethylethyl)-1H-pyrazoles as a model. This proposal includes the quantitative data of a geometric parameter (I D), a contact area parameter (I C), and an energetic parameter (I G). The proposed indexes exhibited good perspective regarding the similarity data and distinct regions of similarity. The range of similarity was set at I X ≥ 0.80, 0.80 > I X > 0.60, and I X ≤ 0.60 (X = D, C, or G). Indexes with a value near 1.0 indicate systems with isostructural, isocontact, and isoenergetic behavior. The results indicated that supramolecular structures with high similarity must have high values for all three indexes (I D, I C, and I G).

Synthesis, effect of substituents on the regiochemistry and equilibrium studies of tetrazolo[1,5-a]pyrimidine/2-azidopyrimidines.

An efficient synthesis methodology for a series of tetrazolo[1,5-a]pyrimidines substituted at the 5- and 7-positions from the cyclocondensation reaction [CCC + NCN] was developed. The NCN corresponds to 5-aminotetrazole and CCC to ß-enaminone. Two distinct products were observed in accordance with the ß-enaminone substituent. When observed in solution, the compounds can be divided into two groups: (a) precursor compounds with R = CF3 or CCl3, which leads to tetrazolo[1,5-a]pyrimidines in high regioselectivity with R at the 7-position of the heterocyclic ring; and (b) precursor compounds with R = aryl or methyl, which leads to a mixture of compounds, tetrazolo[1,5-a] pyrimidines (R in the 5-position of the ring) and 2-azidopyrimidines (R in the 4-position of the ring), which was attributed to an equilibrium of azide-tetrazole. In the solid state, all compounds were found as 2-azidopyrimidines. The regiochemistry of the reaction and the stability of the products are discussed on the basis of the data obtained by density functional theory (DFT) for energetic and molecular orbital (MO) calculations.

Regiochemistry of cyclocondensation reactions in the synthesis of polyazaheterocycles.

The syntheses of several polyazaheterocycles are demonstrated. The cyclocondensation reactions between ß-enaminodiketones [CCl3C(O)C(=CNMe2)C(O)-CO2Et] and aromatic amidines resulted in glyoxalate-substituted pyrido[1,2-a]pyrimidinone, thiazolo[3,2-a]pyrimidinone and pyrimido[1,2-a]benzimidazole. Pyrazinones and quinoxalinones were obtained through the reaction of these glyoxalates with ethylenediamine and 1,2-phenylenediamine derivatives. On the other hand, the reaction of glyoxalates with amidines did not lead to the formation of imidazolones, but rather N-acylated products were obtained. All the products were isolated in good yields. DFT-B3LYP calculations provided HOMO/LUMO coefficients, charge densities, and the stability energies of the intermediates, and from these data it was possible to explain the regiochemistry of the products obtained. Additionally, the data were a useful tool for elucidating the reaction mechanisms.

Preparation of TiO2 nanoparticles coated with ionic liquids: a supramolecular approach.

Coated TiO2 nanoparticles by dicationic imidazolium-based ionic liquids (ILs) were prepared and studied by differential scanning calorimetry (DSC), dynamic light scattering (DLS), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). Three ILs with different hydrophobicity degrees and structural characteristics were used (IL-1, IL-2, and IL-3). The interaction between IL molecules and the TiO2 surface was analyzed in both solid state and in solution. The physical and chemical properties of coated nanoparticles (TiO2 + IL-1, TiO2 + IL-2, and TiO2 + IL-3) were compared to pure materials (TiO2, IL-1, IL-2, and IL-3) in order to evaluate the interaction between both components. Thermal behavior, diffraction pattern, and morphologic characteristics were evaluated in the solid state. It was observed that all mixtures (TiO2 + IL) showed different behavior from that detected for pure substances, which is an evidence of film formation. DLS experiments were conducted to determine film thickness on the TiO2 surface comparing the size (hydrodynamic radius, Rh) of pure TiO2 with coated nanoparticles (TiO2 + IL). Results showed the thickness of the film increased with hydrophobicity of the IL compound. TEM images support this observation. Finally, X-ray diffraction patterns showed that, in coated samples, no structural changes in TiO2 diffraction peaks were observed, which is related to the maintenance of the crystalline structure. On the contrary, ILs showed different diffraction patterns, which confirms the hypothesis of interactions happening between IL and the TiO2 nanoparticles surface.