Remote Tongue-based Control of a Wheelchair Mounted Assistive Robotic Manipulator and the Effect of Adaptive Semi-automation.

Increasing the independence of individuals with tetraplegia is a challenging task. One potential solution is to allow for use of an assistive robotic manipulator (ARM), when solving tasks in personal and remote space. There is a lack in available control interfaces that are suitable for severely disabled individuals. The aim of this paper is twofold: to allow for remote tongue-based control of an ARM and, to study the effect of semiautomation when compared with full manual control of an ARM. Ten able-bodied individuals participated in a two-day experiment where they were asked to drive a wheelchair mounted ARM away from the participant and out of sight. Thereafter, they should either pick up a strawberry or a bottle from a table. All the participants successfully finished three trials for three different control methods: 1) manual control (MA), 2) adaptive level semiautomation (SA), and 3) fixed level semi-automation (FA). The data was analyzed using repeated measures analysis of variance. When grasping the strawberry, there was a significant decrease in the gripping time (60.16±9.13 vs. 90.62±10.06, p = 0.012) and number of used commands (0.73±0.07 vs. 0.86±0.09, p = 0.03) when using FA compared to MA. When grasping the bottle, the SA showed a significant reduction in gripping time (32.30±3.09 vs. 66.15±9.77, p = 0.022) and number of used commands (0.63±0.05 vs. 0.85±0.09, p<0.001) compared with MA. This paper is a step in the direction of providing severely paralyzed individuals with a way to increase their independence and overall quality of life.

User Based Development and Test of the EXOTIC Exoskeleton: Empowering Individuals with Tetraplegia Using a Compact, Versatile, 5-DoF Upper Limb Exoskeleton Controlled through Intelligent Semi-Automated Shared Tongue Control.

This paper presents the EXOTIC- a novel assistive upper limb exoskeleton for individuals with complete functional tetraplegia that provides an unprecedented level of versatility and control. The current literature on exoskeletons mainly focuses on the basic technical aspects of exoskeleton design and control while the context in which these exoskeletons should function is less or not prioritized even though it poses important technical requirements. We considered all sources of design requirements, from the basic technical functions to the real-world practical application. The EXOTIC features: (1) a compact, safe, wheelchair-mountable, easy to don and doff exoskeleton capable of facilitating multiple highly desired activities of daily living for individuals with tetraplegia; (2) a semi-automated computer vision guidance system that can be enabled by the user when relevant; (3) a tongue control interface allowing for full, volitional, and continuous control over all possible motions of the exoskeleton. The EXOTIC was tested on ten able-bodied individuals and three users with tetraplegia caused by spinal cord injury. During the tests the EXOTIC succeeded in fully assisting tasks such as drinking and picking up snacks, even for users with complete functional tetraplegia and the need for a ventilator. The users confirmed the usability of the EXOTIC.

The impact of interdisciplinarity and user involvement on the design and usability of an assistive upper limb exoskeleton - a case study on the EXOTIC.

This study describes an interdisciplinary approach to develop a 5 degrees of freedom assistive upper limb exoskeleton (ULE) for users with severe to complete functional tetraplegia. Four different application levels were identified for the ULE ranging from basic technical application to interaction with users, interaction with caregivers and interaction with the society, each level posing requirements for the design and functionality of the ULE. These requirements were addressed through an interdisciplinary collaboration involving users, clinicians and researchers within social sciences and humanities, mechanical engineering, control engineering media technology and biomedical engineering. The results showed that the developed ULE, the EXOTIC, had a high level of usability, safety and adoptability. Further, the results showed that several topics are important to explicitly address in relation to the facilitation of interdisciplinary collaboration including, defining a common language, a joint visualization of the end goal and a physical frame for the collaboration, such as a shared laboratory. The study underlined the importance of interdisciplinarity and we believe that future collaboration amongst interdisciplinary researchers and centres, also at an international level, can strongly facilitate the usefulness and adoption of assistive exoskeletons and similar technologies.

Eyes-Free Tongue Gesture and Tongue Joystick Control of a Five DOF Upper-Limb Exoskeleton for Severely Disabled Individuals.

Spinal cord injury can leave the affected individual severely disabled with a low level of independence and quality of life. Assistive upper-limb exoskeletons are one of the solutions that can enable an individual with tetraplegia (paralysis in both arms and legs) to perform simple activities of daily living by mobilizing the arm. Providing an efficient user interface that can provide full continuous control of such a device-safely and intuitively-with multiple degrees of freedom (DOFs) still remains a challenge. In this study, a control interface for an assistive upper-limb exoskeleton with five DOFs based on an intraoral tongue-computer interface (ITCI) for individuals with tetraplegia was proposed. Furthermore, we evaluated eyes-free use of the ITCI for the first time and compared two tongue-operated control methods, one based on tongue gestures and the other based on dynamic virtual buttons and a joystick-like control. Ten able-bodied participants tongue controlled the exoskeleton for a drinking task with and without visual feedback on a screen in three experimental sessions. As a baseline, the participants performed the drinking task with a standard gamepad. The results showed that it was possible to control the exoskeleton with the tongue even without visual feedback and to perform the drinking task at 65.1% of the speed of the gamepad. In a clinical case study, an individual with tetraplegia further succeeded to fully control the exoskeleton and perform the drinking task only 5.6% slower than the able-bodied group. This study demonstrated the first single-modal control interface that can enable individuals with complete tetraplegia to fully and continuously control a five-DOF upper limb exoskeleton and perform a drinking task after only 2 h of training. The interface was used both with and without visual feedback.

A review of computer vision for semi-autonomous control of assistive robotic manipulators (ARMs).

Purpose: The advances in artificial intelligence have started to reach a level where autonomous systems are becoming increasingly popular as a way to aid people in their everyday life. Such intelligent systems may especially be beneficially for people struggling to complete common everyday tasks, such as individuals with movement-related disabilities. The focus of this paper is hence to review recent work in using computer vision for semi-autonomous control of assistive robotic manipulators (ARMs). Methods: Four databases were searched using a block search, yielding 257 papers which were reduced to 14 papers after applying various filtering criteria. Each paper was reviewed with focus on the hardware used, the autonomous behaviour achieved using computer vision and the scheme for semi-autonomous control of the system. Each of the reviewed systems were also sought characterized by grading their level of autonomy on a pre-defined scale.Conclusions: A re-occurring issue in the reviewed systems was the inability to handle arbitrary objects. This makes the systems unlikely to perform well outside a controlled environment, such as a lab. This issue could be addressed by having the systems recognize good grasping points or primitive shapes instead of specific pre-defined objects. Most of the reviewed systems did also use a rather simple strategy for the semi-autonomous control, where they switch either between full manual control or full automatic control. An alternative could be a control scheme relying on adaptive blending which could provide a more seamless experience for the user.Implications for rehabilitationAssistive robotic manipulators (ARMs) have the potential to empower individuals with disabilities by enabling them to complete common everyday tasks. This potential can be further enhanced by making the ARM semi-autonomous in order to actively aid the user.The scheme used for the semi-autonomous control of the ARM is crucial as it may be a hindrance if done incorrectly. Especially the ability to customize the semi-autonomous behaviour of the ARM is found to be important.Further research is needed to make the final move from the lab to the homes of the users. Most of the reviewed systems suffer from a rather fixed scheme for the semi-autonomous control and an inability to handle arbitrary objects.

Semi-Autonomous Tongue Control of an Assistive Robotic Arm for Individuals with Quadriplegia.

Individuals suffering from quadriplegia can achieve increased independence by using an assistive robotic manipulator (ARM). However, due to their disability, the interfaces that can be used to operate such devices become limited. A versatile intraoral tongue control interface (ITCI) has previously been develop for this user group, as the tongue is usually spared from disability. A previous study has shown that the ITCI can provide direct and continuous control of 6-7 degrees of freedom (DoF) of an ARM, due to a high number of provided inputs (18). In the present pilot study we investigated whether semi-automation might further improve the efficiency of the ITCI, when controlling an ARM. This was achieved by adding a camera to the end effector of the ARM and using computer vision algorithms to guide the ARM to grasp a target object. Three ITCI and one joystick control scheme were tested and compared: 1) manual Cartesian control with a base frame reference point, 2) manual Cartesian control with an end effector reference point 3) manual Cartesian control with an end effector reference point and an autonomous grasp function 4) regular JACO2 joystick control. The results indicated that end effector control was superior to the base frame control in total task time, number of commands issued and path efficiency. The addition of the automatic grasp function did not improve the performance, but resulted in fewer collisions/displacements of the target object when grasping.