An Analytical Target Profile for the Development of an In Vitro Release Test Method and Apparatus Selection in the Case of Semisolid Topical Formulations.

This study focuses on how to define an Analytical Target Profile (ATP) which is intended for use in practice and on facilitating the selection of in vitro release test (IVRT) technology for diclofenac sodium topical hydrogel and cream. The implementation involves incorporating the new draft guidelines of the International Council for Harmonisation (ICH Q14) and USP (United States Pharmacopeia) Chapter 1220. Four IVRT apparatuses were compared (USP Apparatus II with immersion cell, USP Apparatus IV with semisolid adapter, static vertical diffusion cell, and a new, in-house-developed flow-through diffusion cell) with the help of the ATP. Performance characteristics such as accuracy, precision, cumulative amount released at the end of the IVRT experiment, and robustness were investigated. We found that the best apparatus for developing IVRT quality control (QC) tests in both cases was USP II with an immersion cell. All four different IVRT apparatuses were compared with each other and with the data found in the literature.

Foams Set a New Pace for the Release of Diclofenac Sodium.

Medicated foams have emerged as promising alternatives to traditional carrier systems in pharmaceutical research. Their rapid and convenient application allows for effective treatment of extensive or hirsute areas, as well as sensitive or inflamed skin surfaces. Foams possess excellent spreading capabilities on the skin, ensuring immediate drug absorption without the need for intense rubbing. Our research focuses on the comparison of physicochemical and biopharmaceutical properties of three drug delivery systems: foam, the foam bulk liquid, and a conventional hydrogel. During the development of the composition, widely used diclofenac sodium was employed. The safety of the formulae was confirmed through an in vitro cytotoxicity assay. Subsequently, the closed Franz diffusion cell was used to determine drug release and permeation in vitro. Ex vivo Raman spectroscopy was employed to investigate the presence of diclofenac sodium in various skin layers. The obtained results of the foam were compared to the bulk liquid and to a conventional hydrogel. In terms of drug release, the foam showed a rapid release, with 80% of diclofenac released within 30 min. In summary, the investigated foam holds promising potential as an alternative to traditional dermal carrier systems, offering faster drug release and permeation.

Formulation and investigation of hydrogels containing an increased level of diclofenac sodium using risk assessment tools.

Transdermal delivery of active ingredients is a challenge for pharmaceutical technology due to their inadequate penetration properties and the barrier function of the skin. The necessity of painless, effective, topical therapy for the aging population is growing, and a variety of diclofenac sodium-containing semi-solid preparations are available to alleviate the symptoms of these ailments. Our purpose was to formulate a novel composition with higher drug content to enhance drug release and permeation, thereby providing more effective therapy. Another goal was to maintain the concentration of the organic solvent mixture below 30%, to protect the skin barrier. Firstly, literature and market research were conducted, based on which the appropriate excipients for the target formulation were selected. Solubility tests were conducted with binary and ternary mixtures. As a result, the optimal ternary mixture was chosen. Hydrogels containing 1, 5, and 7% of diclofenac sodium were prepared and the stability of the formulations were studied by microscopic measurements and cytotoxicity test were carried out of the components also. The release and permeation of diclofenac sodium were investigated in different concentrations. It can be concluded that we have succeeded in preparing a topically applicable stable diclofenac sodium hydrogel with higher concentration, drug release, and improved skin permeation than the formulations available on the market.

Lipid Nanoparticles: An Effective Tool to Improve the Bioavailability of Nutraceuticals.

Nano-range bioactive colloidal carrier systems are envisaged to overcome the challenges associated with treatments of numerous diseases. Lipid nanoparticles (LNPs), one of the extensively investigated drug delivery systems, not only improve pharmacokinetic parameters, transportation, and chemical stability of encapsulated compounds but also provide efficient targeting and reduce the risk of toxicity. Over the last decades, nature-derived polyphenols, vitamins, antioxidants, dietary supplements, and herbs have received more attention due to their remarkable biological and pharmacological health and medical benefits. However, their poor aqueous solubility, compromised stability, insufficient absorption, and accelerated elimination impede research in the nutraceutical sector. Owing to the possibilities offered by various LNPs, their ability to accommodate both hydrophilic and hydrophobic molecules and the availability of various preparation methods suitable for sensitive molecules, loading natural fragile molecules into LNPs offers a promising solution. The primary objective of this work is to explore the synergy between nature and nanotechnology, encompassing a wide range of research aimed at encapsulating natural therapeutic molecules within LNPs.

Factorial design of in situ gelling two-compartment systems containing chlorhexidine for the treatment of periodontitis.

Periodontitis is one of the most widespread bacterial infectious oral diseases that affects a significant percentage of the population worldwide. Different bacterial strains are responsible for the chronic inflammation and subgingival plaque that could be effectively treated with prolonged exposure to therapeutic levels of antibiotics and antiseptics in the periodontal pockets. Medicated in situ gels of chlorhexidine (CHX), for extended drug release and long-lasting antiseptic effect in the targeted cavities, were prepared in a two-compartment system. One compartment was loaded with sodium alginate solution while other was filled with CHX and calcium solution. The mixing of the solutions during the application resulted in gelation. Two 33 full factorial designs were applied in this study in order to optimize the gel formulation. Initially, the effects of concentration of gelling agent, crosslinker, and pH of the system on the dependent variables such as gel formation and structure characteristics were investigated. Then, the concentration of the crosslinker was optimized. Afterwards, the effect of gelling agent, loading of the drug, and pH of the gel system were correlated with the gel characteristics through another factorial design. Optimized formulations were tested for mucoadhesion, in vitro drug release, and microbiological investigation. Based on the results of the factorial design, mucoadhesiveness, antimicrobial investigation, and drug release, a 4 % alginate composition can be considered optimal. Overall, the optimized in situ periodontal gel was found to be effective with prolonged retention time and desirable outcomes.

Combined Nanofibrous Face Mask: Co-Formulation of Lipases and Antibiotic Agent by Electrospinning Technique.

The application of enzyme-based therapies has received significant attention in modern drug development. Lipases are one of the most versatile enzymes that can be used as therapeutic agents in basic skin care and medical treatment related to excessive sebum production, acne, and inflammation. The traditional formulations available for skin treatment, such as creams, ointments or gels, are widely applied; however, their use is not always accompanied by good drug penetration properties, stability, or patient adherence. Nanoformulated drugs offer the possibility of combining enzymatic and small molecule formulations, making them a new and exciting alternative in this field. In this study polymeric nanofibrous matrices made of polyvinylpyrrolidone and polylactic acid were developed, entrapping lipases from Candida rugosa and Rizomucor miehei and antibiotic compound nadifloxacin. The effect of the type of polymers and lipases were investigated, and the nanofiber formation process was optimized to provide a promising alternative in topical treatment. Our experiments have shown that entrapment by electrospinning induced two orders of magnitude increase in the specific enzyme activity of lipases. Permeability investigations indicated that all lipase-loaded nanofibrous masks were capable of delivering nadifloxacin to the human epidermis, confirming the viability of electrospinning as a formulation method for topical skin medications.

Development of Capsaicin-Containing Analgesic Silicone-Based Transdermal Patches.

Transdermal therapeutic systems (TTSs) enable convenient dosing in drug therapy. Modified silicone-polymer-based patches are well-controlled and cost-effective matrix diffusion systems. In the present study, we investigated the substance release properties, skin penetration, and analgesic effect of this type of TTS loaded with low-dose capsaicin. Release properties were measured in Franz diffusion cell and continuous flow-through cell approaches. Capsaicin was detected with HPLC-UV and UV spectrophotometry. Raman spectroscopy was conducted on human skin samples exposed to the TTS. A surgical incision or carrageenan injection was performed on one hind paw of male Wistar rats. TTSs were applied to the epilated dorsal skin. Patches were kept on the animals for 6 h. The thermal hyperalgesia and mechanical pain threshold of the hind paws were detected. Patches exhibited controlled, zero-order kinetic capsaicin release. According to the Raman mapping, capsaicin penetrated into the epidermis and dermis of human skin, where the target receptors are expressed. The thermal pain threshold drop of the operated rat paws was reversed by capsaicin treatment compared to that of animals treated with control patches. It was concluded that our modified silicone-polymer-based capsaicin-containing TTS is suitable for the relief of traumatic and inflammatory pain.

Design and Optimization of In Situ Gelling Mucoadhesive Eye Drops Containing Dexamethasone.

Poor bioavailability of eye drops is a well-known issue, which can be improved by increasing the residence time on the eye surface and the penetration of the active pharmaceutical ingredient (API). This study aims to formulate in situ gelling mucoadhesive ophthalmic preparations. To increase the residence time, the formulations were based on a thermosensitive polymer (Poloxamer 407 (P407)) and were combined with two types of mucoadhesive polymers. Dexamethasone (DXM) was solubilized by complexation with cyclodextrins (CD). The effect of the composition on the gel structure, mucoadhesion, dissolution, and permeability was investigated with 33 full factorial design. These parameters of the gels were measured by rheological studies, tensile test, dialysis membrane diffusion, and in vitro permeability assay. The dissolution and permeability of the gels were also compared with DXM suspension and CD-DXM solution. The gelation is strongly determined by P407; however, the mucoadhesive polymers also influenced it. Mucoadhesion increased with the polymer concentration. The first phase of drug release was similar to that of the CD-DXM solution, then it became prolonged. The permeability of DXM was significantly improved. The factorial design helped to identify the most important factors, thereby facilitating the formulation of a suitable carrier for the CD-DXM complex.

Novel aspects of Raman spectroscopy in skin research.

The analytical technology of Raman spectroscopy has an almost 100-year history. During this period, many modifications and developments happened in the method like discovery of laser, improvements in optical elements and sensitivity of spectrometer and also more advanced light detection systems. Many types of the innovative techniques appeared (e.g. Transmittance Raman spectroscopy, Coherent Raman Scattering microscopy, Surface-Enhanced Raman scattering and Confocal Raman spectroscopy/microscopy). This review article gives a short description about these different Raman techniques and their possible applications. Then, a short statistical part is coming about the appearance of Raman spectroscopy in the scientific literature from the beginnings to these days. The third part of the paper shows the main application options of the technique (especially confocal Raman spectroscopy) in skin research, including skin composition analysis, drug penetration monitoring and analysis, diagnostic utilizations in dermatology and cosmeto-scientific applications. At the end, the possible role of artificial intelligence in Raman data analysis and the regulatory aspect of these techniques in dermatology are briefly summarized. For the future of Raman Spectroscopy, increasing clinical relevance and in vivo applications can be predicted with spreading of non-destructive methods and appearance with the most advanced instruments with rapid analysis time.

Application of Xanthan Gum and Hyaluronic Acid as Dermal Foam Stabilizers.

Foams are increasingly popular in the field of dermatology due to their many advantages such as easy spreading, good skin sensation, and applicability in special skin conditions. One of the critical points of foam formulation is the choice of the appropriate stabilizing ingredients. One of the stability-increasing strategies is retarding the liquid drainage of liquid films from the foam structure. Therefore, our aim was the application of different hydrogel-forming polymers in order to retain the stabilizing liquid film. Dexpanthenol and niacinamide-containing foams were formulated, where xanthan gum and hyaluronic acid were used as foam-stabilizing polymers. Amplitude (LVE range) and frequency sweep (G', G", tanδ, and frequency dependency) were applied as structure- and stability-indicating rheological parameters. The rheological data were compared with the results of the cylinder method, microscopical images, and the spreadability measurements. The application of the gel-forming polymers increased the stability of the dermal foams (increased LVE range, G' values, and decreased frequency dependency). These results were in correlation with the results of the cylinder and spreadability tests. It was concluded that in terms of both foam formation and stability, the combination of xanthan gum and dexpanthenol can be ideal.

Analytical Quality by Design (AQbD) Approach to the Development of In Vitro Release Test for Topical Hydrogel.

The aim of our study was to adapt the analytical quality by design (AQbD) approach to design an effective in vitro release test method using USP apparatus IV with a semi-solid adapter (SSA) for diclofenac sodium hydrogel. The analytical target profile (ATP) of the in vitro release test and ultra-high-performance liquid chromatography were defined; the critical method attributes (CMAs) (min. 70% of the drug should be released during the test, six time points should be obtained in the linear portion of the drug release profile, and the relative standard deviation of the released drug should not be over 10%) were selected. An initial risk assessment was carried out, in which the CMAs (ionic strength, the pH of the media, membrane type, the rate of flow, the volume of the SSA (sample amount), the individual flow rate of cells, drug concentration %, and the composition of the product) were identified. With the results, it was possible to determine the high-risk parameters of the in vitro drug release studies performed with the USP apparatus IV with SSA, which were the pH of the medium and the sample weight of the product. Focusing on these parameters, we developed a test protocol for our hydrogel system.

Investigation of the effect of polymers on dermal foam properties using the QbD approach.

Dermal foams are promising drug delivery systems due to their many advantages and ease of application. Foams are also considered a novelty in the field of dermatology. In particular, they are beneficial for the treatment of skin conditions where patients have highly inflamed, swollen, infected and sensitive skin, as the application of the foam to the skin surface to be treated minimizes the need for skin contact. In order to formulate foams, it is necessary to know which material and process parameters influence the quality characteristics of foams and which methods can be used to study foams; this part of the research is assisted by the QbD approach. By using the QbD concept, it contributed during the development process to ensure quality-based development. With initial risk assessment, the critical material attributes (CMAs) and the critical process parameters (CPPs) were identified to ensure the required critical quality attributes (CQAs). During the initial risk assessment, five high-risk CQAs, namely foam volume stability, foam expansion, cross point, the initial values of the number and size of bubbles, and three medium-risk CQAs, namely spreadability, relative foam density and viscosity of the liquid system were identified and investigated. In this research, different types of polymers (xanthan gum, hydroxyethylcellulose, different types of hyaluronic acids) were used to improve the properties of foam formulations. The formulations containing xanthan gum and high molecular weight hyaluronic acid had good foam properties and will be appropriate delivery systems for an active pharmaceutical ingredient. Overall, the polymer content had a great effect on the properties of the foams. Different polymers affect the properties of foams in different ways. When used in combination, the methods reinforce each other and help to select a formula for dermal application.

The effects of glycols on molecular mobility, structure, and permeability in stratum corneum.

The skin provides an attractive alternative to the conventional drug administration routes. Still, it comes with challenges as the upper layer of the skin, the stratum corneum (SC), provides an efficient barrier against permeation of most compounds. One way to overcome the skin barrier is to apply chemical permeation enhancers, which can modify the SC structure. In this paper, we investigated the molecular effect of three different types of glycols in SC: dipropylene glycol (diPG), propylene glycol (PG), and butylene glycol (BG). The aim is to understand how these molecules influence the molecular mobility and structure of the SC components, and to relate the molecular effects to the efficiency of these molecules as permeation enhancers. We used complementary experimental techniques, including natural abundance 13C NMR spectroscopy and wide-angle X-ray diffraction to characterize the molecular consequences of these compounds at different doses in SC at 97% RH humidity and 32 °C. In addition, we study the permeation enhancing effects of the same glycols in comparable conditions using Raman spectroscopy. Based on the results from NMR, we conclude that all three glycols cause increased mobility in SC lipids, and that the addition of glycols has an effect on the keratin filaments in similar manner as Natural Moisturizing Factor (NMF). The highest mobility of both lipids and amino acids can be reached with BG, which is followed by PG. It is also shown that one reaches an apparent saturation level for all three chemicals in SC, after which increased addition of the compound does not lead to further increase in the mobility of SC lipids or protein components. The examination with Raman mapping show that BG and PG give a significant permeation enhancement as compared to SC without any added glycol at corresponding conditions. Finally, we observe a non-monotonic response in permeation enhancement with respect to the concentration of glycols, where the highest concentration does not give the highest permeation. This is explained by the dehydration effects at highest glycol concentrations. In summary, we find a good correlation between the molecular effects of glycols on the SC lipid and protein mobility, and macroscopic permeation enhances of the same molecules.

Comparison of Synthetic Membranes to Heat-Separated Human Epidermis in Skin Permeation Studies In Vitro.

In recent years, the study of dermal preparations has received increased attention. There are more and more modern approaches to evaluate transdermal formulations, which are crucial in proving the efficacy of a formulation. The aim of this study was to compare permeation across innovative synthetic membranes (Strat-M and Skin PAMPA membranes) and heat-separated human epidermis (HSE, gold standard membrane) using four different dermal formulations. The Strat-M and Skin PAMPA membranes were designed to mimic the stratum corneum layer of the human epidermis. There have also been some publications on their use in dermal formulation development, but further information is needed. Drug permeation was measured using formulations containing diclofenac sodium (two hydrogels and two creams). The HSE, Strat-M, and Skin PAMPA membranes proved to be significantly different, but based on the results, the Strat-M membrane showed the greatest similarity to HSE. The permeation data of the different formulations across different membranes showed good correlations with formulations similar to these four, which allows the prediction of permeation across HSE using these synthetic membranes. In addition, Strat-M and Skin PAMPA membranes have the potential to select and differentiate a dermal formulation containing diclofenac sodium as an early screening model.

Physical-Chemical Aspects of the Preparation and Drug Release of Electrospun Scaffolds.

Fibers were spun from a mixture of dichloromethane (DCM) and dimethyl sulfoxide (DMSO) solution of poly(lactic acid)(PLA) containing various amounts of amoxicillin (Amox) as the active component. Composition changes during spinning, structure, solubility, and the location of the drug were considered during the evaluation of drug release and microbial activity. The results showed that the composition of the material changes during the preparation procedure. The solubility of the drug in the components and that of the components in each other is limited, which results in the formation of several phases and the precipitation of the drug. The technology used results in the partitioning of the drug; some is located inside, while the rest is among the fibers. The wetting of the fibers or disks by the water-based dissolution media is poor, the penetration of the liquid into and the diffusion of the active component out of the device takes considerable time. Drug release takes place in one, burst-like step, only Amox located among the fibers dissolve and diffuse into the surrounding medium. The slow second stage of release claimed in the literature is less probable because the size of the Amox molecule is considerably larger than the holes creating the free volume of the polymer. The prepared device has antimicrobial activity, inhibits the growth of the two bacterial strains studied. The time scale of activity is short and corresponds to that of the release experiments and the burst-like behavior of the device. The results clearly prove that physical-chemical factors play a determining role in the effect and efficiency of medical devices prepared from electrospun fibers containing an active component.

Rheological effects of hypertonic saline and sodium bicarbonate solutions on cystic fibrosis sputum in vitro.

BACKGROUND: Cystic fibrosis (CF) is a life-threatening multiorgan genetic disease, particularly affecting the lungs, where recurrent infections are the main cause of reduced life expectancy. In CF, mutations in the gene encoding the cystic fibrosis transmembrane conductance regulator (CFTR) protein impair transepithelial electrolyte and water transport, resulting in airway dehydration, and a thickening of the mucus associated with abnormal viscoelastic properties. Our aim was to develop a rheological method to assess the effects of hypertonic saline (NaCl) and NaHCO3 on CF sputum viscoelasticity in vitro, and to identify the critical steps in sample preparation and in the rheological measurements. METHODS: Sputum samples were mixed with hypertonic salt solutions in vitro in a ratio of either 10:4 or 10:1. Distilled water was applied as a reference treatment. The rheological properties of sputum from CF patients, and the effects of these in vitro treatments, were studied with a rheometer at constant frequency and strain, followed by frequency sweep tests, where storage modulus (G'), loss modulus (G″) and loss factor were determined. RESULTS: We identified three distinct categories of sputum: (i) highly elastic (G' > 100,000 Pa), (ii) elastic (100,000 Pa > G' > 1000 Pa), and (iii) viscoelastic (G' < 1000). At the higher additive ratio (10:4), all of the added solutions were found to significantly reduce the gel strength of the sputum, but the most pronounced changes were observed with NaHCO3 (p < 0.001). Samples with high elasticity exhibited the greatest changes while, for less elastic samples, a weakening of the gel structure was observed when they were treated with water or NaHCO3, but not with NaCl. For the viscoelastic samples, the additives did not cause significant changes in the parameters. When the lower additive ratio (10:1) was used, the mean values of the rheological parameters usually decreased, but the changes were not statistically significant. CONCLUSION: Based on the rheological properties of the initial sputum samples, we can predict with some confidence the treatment efficacy of each of the alternative additives. The marked differences between the three categories suggest that it is advisable to evaluate each sample individually using a rheological approach such as that described here.

QbD-Based Investigation of Dermal Semisolid in situ Film-Forming Systems for Local Anaesthesia.

PURPOSE: The aim of our research work was to develop dermally applicable, lidocaine hydrochloride (LID-HCl)-containing semisolid in situ film-forming systems (FFSs) using the Quality by Design (QbD) approach to increase drug permeation into the skin. METHODS: Silicones were used to improve the properties of formulations and to increase the permeation through the skin. The QbD approach was applied to ensure quality-based development. With initial risk assessment, the critical material attributes (CMAs) and the critical process parameters (CPPs) were identified to ensure the required critical quality attributes (CQAs). RESULTS: During the initial risk assessment, four high-risk CQAs, namely in vitro drug release, in vitro drug permeation, drying properties, and mechanical properties, and three medium-risk CQAs, namely pH, viscosity, and film appearance were identified and investigated. Moreover, four high-risk CMAs were also considered during the formulation: permeation enhancing excipients, drying excipients, film-forming excipients, and emollients. During the experiments, LID-HCl influenced these critical parameters highly, thereby reducing the drying time. The formulation containing 25% silicone showed the best mechanical properties (49 mN skin adhesion, 20.3% film flexibility, 1.27 N film burst strength), which could predict better patient adherence. In addition, in vitro permeation studies showed that formulation containing 50% silicone has the fastest permeation rate. The flux of diffused API was 6.763 µg/cm2/h, which is much higher compared to the silicone-free formulation (1.5734 µg/cm2/h), and it can already be observed in the lower part of the dermis in 0.5 hour. CONCLUSION: Our results show that LID-HCl has great influence on the critical parameters of FFSs. The silicone content can improve the applicability of formulations and has a favorable effect on the permeation rate of LID-HCl into the skin.

Effects of Formulation Excipients on Skin Barrier Function in Creams Used in Pediatric Care.

Semisolid dosage forms are recommended for the dermal care of babies and children. If we look at the ingredients of these preparations, there are still many cases in which there are substances (occlusive agents, preservatives) that no longer meet certain requirements of the modern age, so it is timely to replace them with other substances. The aim of this work was to formulate a science-based formulation with new components that keep or improve its moisturizing properties, rheological parameters, and microbiological stability. Occlusive oils, like white petrolatum and liquid paraffin and the preservative parabens are traditional ingredients in oil in water creams, were replaced with white beeswax, sunflower oil, and phenoxyethanol, respectively. Cocoa butter, urea, and glycerol were added to improve long-lasting hydration and support the barrier function of the reformulated creams. The rheological properties of the formulations were determined. The effects of the preparations on skin hydration and on the barrier function of the skin were tested. Furthermore, microbiological stability was investigated. The result of the reformulation was an o/w cream that provided a good longer-lasting hydration effect; supported the barrier function of the baby skin without occlusion; and had adequate consistency, easy spreading, a pleasant skin feeling, proper pH, and good microbiological stability.

Novel In Vitro Investigational Methods for Modeling Skin Permeation: Skin PAMPA, Raman Mapping.

The human skin is marked as a standard by the regulatory agencies in the permeation study of dermal formulations. Artificial membranes can substitute human skin to some extent. Academicians and pharmaceutical corporations are focusing their efforts on developing standardized protocols and safe, reliable options to substitute human skin for carrying out permeability studies. Our research aim was to study the applicability of new techniques in the case of different types of dermal formulations. The skin parallel artificial membrane permeability assay (PAMPA) method and Raman mapping were compared to the gold-standard Franz cell method. A hydrogel and two types of creams were investigated as the most generally used dermal preparations. The values of the diffused drug were closer to each other in PAMPA and Franz cell measurement. The diffused amount of drug showed the same order for the different formulations. These results correlate well with the results of Raman mapping. Our conclusions suggest that all early screening examinations can be performed with model tools such as skin PAMPA supplemented with methods like Raman mapping as a semi-quantitative method.

Development and Characterization of Potential Ocular Mucoadhesive Nano Lipid Carriers Using Full Factorial Design.

Generally, topically applied eye drops have low bioavailability due to short residence time and low penetration of the drug. The aim of the present study was to incorporate dexamethasone (DXM) into nano lipid carriers (NLC), which contain mucoadhesive polymer, in order to increase the bioavailability of the drug. A 23 factorial experimental design was applied, in which the three factors were the polymer, the DXM, and the emulsifier concentrations. The samples were analyzed for particle size, zeta potential, polydispersity index, and Span value. The significant factors were identified. The biocompatibility of the formulations was evaluated with human corneal toxicity tests and immunoassay analysis. The possible increase in bioavailability was analyzed by means of mucoadhesivity, in vitro drug diffusion, and different penetration tests, such as in vitro cornea PAMPA model, human corneal cell penetration, and ex vivo porcine corneal penetration using Raman mapping. The results indicated that DXM can be incorporated in stable mucoadhesive NLC systems, which are non-toxic and do not have any harmful effect on cell junctions. Mucoadhesive NLCs can create a depot on the surface of the cornea, which can predict improved bioavailability.