Salmonella, Escherichia coli and Enterobacteriaceae in the peanut supply chain: From farm to table.

Due to recent foodborne outbreaks, peanuts have been considered a potential risk for Salmonella transmission. For this reason, the aim of this study was to determine the prevalence and contamination load of Salmonella, Escherichia coli and Enterobacteriaceae throughout the peanut supply chain in Brazil. Samples of peanuts and peanut-containing processed products from post-harvest (n=129), secondary processing (n=185) and retail market (n=100) were analyzed. The results showed high Enterobacteriaceae counts in the post-harvest samples. At the end of the secondary processing, 16% of the samples remained contaminated by this group of microorganisms. Six peanut samples from primary production and one sample of peanut butter were tested positive for E. coli while Salmonella was detected in nine samples (2.2%): six from post-harvest, two from the initial stage of the secondary processing and one from retail. The Salmonella counts ranged between 0.004 and 0.092MPN/g and five serotypes were identified (Muenster, Miami, Javiana, Oranienburg, Glostrup). The results demonstrated a high prevalence of Enterobacteriaceae and low prevalence of E. coli throughout the peanut supply chain. Furthermore, it was verified that peanuts may become contaminated by Salmonella during different stages of the supply chain, especially at post-harvest.

Estudo metanalítico da resposta de gramíneas perenes de verão à adubação nitrogenada / Meta-analytic study of response of nitrogen fertilization on perennial summer grasses

O presente trabalho visou empregar um estudo metanalítico para sumarizar e analisar dados sobre adubação nitrogenada em pastagens formadas por gramíneas dos gêneros Brachiaria, Cynodon e Panicum. Foram selecionados 36 trabalhos de pesquisa realizados no Brasil nos últimos 10 anos, incluindo artigos científicos, teses e dissertações. Com base nos dados contidos nesses trabalhos, foi calculado o incremento relativo de matéria seca e de proteína bruta em relação ao tratamento controle (ausência de adubação nitrogenada) e a eficiência da utilização do nitrogênio na produção de matéria seca e proteína bruta. Os dados obtidos foram submetidos à análise de variância para efeito linear e quadrático em cada uma das variáveis dentro de cada gênero e, no caso de significância, foi realizada análise de regressão. A produção de matéria seca e de proteína bruta de forrageiras tropicais responde de forma expressiva à adubação nitrogenada, principalmente a segunda, porém o acréscimo nas doses de nitrogênio reduz a eficiência da adubação. Verificou-se uma frequente omissão de informações relevantes em trabalhos com adubação nitrogenada em pastagens.(AU)

The study aimed to employ a meta-analytic study to summarize and analyze data on nitrogen fertilization in grasslands formed by grasses of the genera Brachiaria, Cynodon and Panicum. A sample of 36 research projects carried out in Brazil in the last ten years, including scientific papers, theses and dissertations were selected. From the data contained in these works, relative dry matter and crude protein increment compared to the control treatment (absence of nitrogen fertilization) and the efficiency of nitrogen use in the production of dry matter and crude protein were calculated. Data were subjected to analysis of variance for linear and quadratic effect on each variable within each genus and, in case of significance, regression analysis was performed. The production of dry matter and crude protein of tropical forages responds greatly to nitrogen fertilization, especially the second, but the increase in nitrogen rates reduces the efficiency of fertilization. There was a frequent omission of relevant information in scientific works on nitrogen fertilization in grasslands.(AU)

Development and validation of the first SSR markers for Mimosa scabrella Benth.

Mimosa scabrella Benth., popularly known as ''bracatinga'', is a pioneer and endemic species of Brazil, occurring in Mixed Ombrophilous Forest associated with Brazilian Atlantic Rainforest biomes. It is a fast-growing tree of the Fabaceae family that facilitates the dynamics of ecological succession. SSR development, when there is no genome sequence, is time and labor intensive and there are no molecular markers for M. scabrella. We developed and validated the first microsatellite markers for this tetraploid species, evaluating mother trees and progenies. Using Illumina sequencing, we identified 290 SSR loci and 211 primer pairs. After 31 SSR loci PCR/agarose electrophoresis selection, a subset of 11 primer pairs was synthetized with fluorescence in the forward primer for PCR and capillary electrophoresis validation with leaf DNA of 33 adult and 411 progeny individuals. Polymorphic locus percentage was 36, 4 in 11 loci, 3 chloroplast SSRs, and 1 nuclear SSR. Allele number of polymorphic loci ranged from 2 to 11 alleles considering all sampling. All 11 primer pairs were also tested for cross-species amplification for five Fabaceae-Mimosoideae species, ranging from 2 loci transferred to Calliandra tweedii Benth. and all 11 loci transferred to Mimosa taimbensis Burkart. The assessed and validated SSR markers for M. scabrella are suitable and useful for analysis and population genetic studies.

Effects of the addition of nanoparticulate calcium carbonate on setting time, dimensional change, compressive strength, solubility and pH of MTA.

AIM: To evaluate nanoparticulate calcium carbonate (NPCC) using transmission electron microscopy and the effects of NPCC addition to MTA in regard to the setting time, dimensional change, compressive strength, solubility and pH. METHODOLOGY: The experimental groups were G1 (MTA), G2 (MTA with 5% NPCC) and G3 (MTA with 10% NPCC). The tests followed ISO and ADA standards. The specimens in the dimensional change and compressive strength tests were measured immediately after setting, after 24 h and after 30 days. In the solubility test, rings filled with cement were weighed after setting and after 30 days. The pH was measured after 24 h and 30 days. The data were analysed with the ANOVA, Tukey's and Kruskal-Wallis tests (α = 5%). RESULTS: The setting time was reduced (P < 0.05) in samples from G2 and G3 compared to G1. After 24 h, the dimensional change was similar amongst the groups, and after 30 days, G2 was associated with less alteration than G1 and G3. There was a difference in the compressive strength (P < 0.001) after 24 h and 30 days (G1 > G2 > G3). The solubility test revealed a difference amongst the groups when the specimens were hydrated: G2 > G1 > G3 and dehydrated: G3 > G2 > G1. The pH of the groups was similar at 24 h with higher values in each group after 30 days (P < 0.05), and G2 and G3 had similar mean pH values but both were higher than G1. CONCLUSIONS: Nanoparticulate calcium carbonate had a cubic morphology with few impurities. The addition of nanoparticulate calcium carbonate to MTA accelerated the setting time, decreased compressive strength and, after 30 days, resulted in lower dimensional change (G2), higher solubility and a higher pH.

Microbiological contamination in peanut confectionery processing plants.

AIMS: In order to investigate Enterobacteriaceae, coliforms, Escherichia coli and Salmonella contamination, a survey was conducted at three peanut confectionery processing companies (A, B and C) in Brazil. METHODS AND RESULTS: Samples of different peanut confectionery products (n = 59), peanut raw material (n = 30), manufacturing environment (n = 116) and workers' hand surfaces (n = 12) were analysed. Salmonella and E. coli were not detected in any final product or raw material analysed. Enterobacteriaceae was isolated from 15% of final products. Coliforms were detected in only one sample. Referring to the raw material, six samples showed contamination by Enterobacteriaceae and three samples by coliforms. For the process environment, 19% and 11% of samples presented Enterobacteriaceae and coliforms. Escherichia coli was detected in 5% of samples, and one of these samples tested positive for Salmonella; this strain was serotyping as S. Heidelberg. All food handlers surveyed in Company C showed Enterobacteriaceae and coliforms on their hands. Escherichia coli was isolated from one food worker's hand. CONCLUSION: The results showed that the manufacturing environment, including food handlers were considered the main sources for possible contamination of peanut confectionery products. SIGNIFICANCE AND IMPACT OF THE STUDY: This has been the first study to investigate the occurrence of Salmonella and other Enterobacteriaceae throughout peanut confectionery processing lines. The results might be used to assist risk assessment studies and to establish more effective control measures.

Detection and quantitative analysis of two independent binding modes of a small ligand responsible for DC-SIGN clustering.

DC-SIGN (dendritic cell-specific ICAM-3 grabbing non-integrin) is a C-type lectin receptor (CLR) present, mainly in dendritic cells (DCs), as one of the major pattern recognition receptors (PRRs). This receptor has a relevant role in viral infection processes. Recent approaches aiming to block DC-SIGN have been presented as attractive anti-HIV strategies. DC-SIGN binds mannose or fucose-containing carbohydrates from viral proteins such as the HIV envelope glycoprotein gp120. We have previously demonstrated that multivalent dendrons bearing multiple copies of glycomimetic ligands were able to inhibit DC-SIGN-dependent HIV infection in cervical explant models. Optimization of glycomimetic ligands requires detailed characterization and analysis of their binding modes because they notably influence binding affinities. In a previous study we characterized the binding mode of DC-SIGN with ligand 1, which shows a single binding mode as demonstrated by NMR and X-ray crystallography. In this work we report the binding studies of DC-SIGN with pseudotrisaccharide 2, which has a larger affinity. Their binding was analysed by TR-NOESY and STD NMR experiments, combined with the CORCEMA-ST protocol and molecular modelling. These studies demonstrate that in solution the complex cannot be explained by a single binding mode. We describe the ensemble of ligand bound modes that best fit the experimental data and explain the higher inhibition values found for ligand 2.

The application of antimicrobial photodynamic therapy (aPDT) in dentistry: a critical review.

In recent years there have been an increasing number of in vitro and in vivo studies that show positive results regarding antimicrobial photodynamic therapy (aPDT) used in dentistry. These include applications in periodontics, endodontics, and mucosal infections caused by bacteria present as biofilms. Antimicrobial photodynamic therapy is a therapy based on the combination of a non-toxic photosensitizer (PS) and appropriate wavelength visible light, which in the presence of oxygen is activated to produce reactive oxygen species (ROS). ROS induce a series of photochemical and biological events that cause irreversible damage leading to the death of microorganisms. Many light-absorbing dyes have been mentioned as potential PS for aPDT and different wavelengths have been tested. However, there is no consensus on a standard protocol yet. Thus, the goal of this review was to summarize the results of research on aPDT in dentistry using the PubMed database focusing on recent studies of the effectiveness aPDT in decreasing microorganisms and microbial biofilms, and also to describe aPDT effects, mechanisms of action and applications.

R2R-printed inverted OPV modules--towards arbitrary patterned designs.

We describe the fabrication of roll-to-roll (R2R) printed organic photovoltaic (OPV) modules using gravure printing and rotary screen-printing processes. These two-dimensional printing techniques are differentiating factors from coated OPVs enabling the direct patterning of arbitrarily shaped and sized features into visual shapes and, increasing the freedom to connect the cells in modules. The inverted OPV structures comprise five layers that are either printed or patterned in an R2R printing process. We examined the rheological properties of the inks used and their relationship with the printability, the compatibility between the processed inks, and the morphology of the R2R-printed layers. We also evaluate the dimensional accuracy of the printed pattern, which is an important consideration in designing arbitrarily-shaped OPV structures. The photoactive layer and top electrode exhibited excellent cross-dimensional accuracy corresponding to the designed width. The transparent electron transport layer extended 300 µm beyond the designed values, whereas the hole transport layer shrank 100 µm. We also examined the repeatability of the R2R fabrication process when the active area of the module varied from 32.2 cm(2) to 96.5 cm(2). A thorough layer-by-layer optimization of the R2R printing processes resulted in realization of R2R-printed 96.5 cm(2) sized modules with a maximum power conversion efficiency of 2.1% (mean 1.8%) processed with high functionality.

Diversidade e estrutura genética de populações de Varronia curassavica Jacq. em restingas da Ilha de Santa Catarina / Genetic diversity and structure of Varronia curassavica Jacq. populations in the restinga of Santa Catarina Island

RESUMO Varronia curassavica Jacq. (Boraginaceae) está presente na vegetação de restinga e apresenta relevantes propriedades medicinais. A espécie é explorada especialmente por comunidades locais e pela indústria farmacêutica, porém, carece de informações ecológicas e genéticas a seu respeito. Nesse contexto, o estudo foi conduzido com o objetivo de caracterizar a diversidade genética de três populações de V. curassavica em áreas de restinga na Ilha de Santa Catarina. Foram coletadas folhas de 50 indivíduos adultos em cada uma das três áreas de estudo e as frequências alélicas das populações foram obtidas a partir de 14 locos alozímicos. Foram encontrados 25 alelos distintos nas três populações, sendo dois alelos exclusivos. As populações apresentaram diversidade genética média de 0,111 e índice de fixação médio de -0,060 (-0,273 até 0,222). Os níveis de diversidade são intermediários, semelhantes aos exibidos por espécies da mesma família ou de características ecológicas semelhantes. Os índices de fixação foram todos significativos e discrepantes entre as populações, sendo que duas delas apresentaram excesso de heterozigotos. A divergência genética interpopulacional foi significativa e igual a 0,079, considerada moderada e sugerindo efeitos de subdivisão populacional. Os níveis de diversidade genética encontrados e a redução populacional causada pela redução e fragmentação dos habitats em que a espécie ocorre sugerem medidas de conservação ex situ e demandam maior rigor na proteção legal de áreas de proteção permanente.

ABSTRACT The Varronia curassavica Jacq. (Boraginaceae) is present in restinga vegetation and shows relevant medicinal properties. The species is exploited by local communities and by the pharmaceutical industry; however, it lacks ecological and genetic information. Thus, this study aimed to characterize the genetic diversity of three V. curassavica populations in restinga areas of Santa Catarina Island. Leaves of 50 adult individuals were sampled in each of the three study areas and the allelic frequencies were obtained from 14 allozyme loci. Twenty-five different alleles were found in the three populations, two of them being exclusive. The populations showed, on average, a genetic diversity of 0,111 and a fixation index of -0,060 (-0,273 to 0,222). The diversity levels are intermediary, similar to those ones owned by species of the same family or with similar ecological traits. The fixation indexes were all significant and discrepant among the populations, with two of them showing excess of heterozygotes. The genetic divergence among populations was significant and equal to 0,079, which is considered moderate and suggests effects of population subdivision. The levels of genetic diversity found and the population decrease caused by reduction and fragmentation of habitats in which the species are present implies in ex situ conservation measures and a higher enforcement of the legal preservation of permanent protected areas.

An Identifiable State Model To Describe Light Intensity Influence on Microalgae Growth.

Despite the high potential as feedstock for the production of fuels and chemicals, the industrial cultivation of microalgae still exhibits many issues. Yield in microalgae cultivation systems is limited by the solar energy that can be harvested. The availability of reliable models representing key phenomena affecting algae growth may help designing and optimizing effective production systems at an industrial level. In this work the complex influence of different light regimes on seawater alga Nannochloropsis salina growth is represented by first principles models. Experimental data such as in vivo fluorescence measurements are employed to develop the model. The proposed model allows description of all growth curves and fluorescence data in a reliable way. The model structure is assessed and modified in order to guarantee the model identifiability and the estimation of its parametric set in a robust and reliable way.

Secondary repair of flexor tendon injuries.

Tendon adhesions or even secondary ruptures causing severe hand functional impairment still represent a frequent complication after repair of flexor tendon injuries. Secondary treatment of these problems includes tenolysis, one or two stages flexor tendons reconstruction by grafts or even the use of tendon prosthesis. The mechanism and severity of injury, the status of the surrounding tissues and injured finger, the presence of associated lesions, the age of the patient, post-operative management, patient motivation and the surgeon's skill, may all have implications in the final outcome of the tendon reconstruction. A correct evaluation of the problem by means of classifications such as the one described by Boyes, may help the surgeon in choosing the appropriate technique.

Staining tumor cells with biotinylated ACL-I, a lectin isolated from the marine sponge, Axinella corrugata.

Axinella corrugata lectin 1 (ACL-1) was purified from aqueous extracts of the marine sponge, Axinella corrugata. ACL-1 strongly agglutinates native rabbit erythrocytes. The hemagglutination is inhibited by N-acetyl derivatives, particularly N, N', N"-triacetylchitotriose, N-acetyl-D-glucosamine, N-acetyl-D-mannosamine and N-acetyl-D-galactosamine. We investigated the capacity of biotinylated ACL-1 to stain several transformed cell lines including breast (T-47D, MCF7), colon (HT-29), lung (H460), ovary (OVCAR-3) and bladder (T24). ACL-I may bind to both monosaccharides and oligosaccharides of tumor cells, N-acetyl-D-galactosamine, and N-acetyl-D- glucosamine glycan types. The lectins are useful, not only as markers and diagnostic parameters, but also for tissue mapping in suspicious neoplasms. In addition, they provide a better understanding of neoplasms at the cytological and molecular levels. Furthermore, the use of potential metastatic markers such as lectins is crucial for developing successful tools for therapy against cancer. We observed that biotinylated ACL-I stains tumor cells and may hold potential as a probe for identifying transformed cells and for studying glycan structures synthesized by such cells.

Selective cytotoxicity and apoptosis induction in glioma cell lines by 5-oxygenated-6,7-methylenedioxycoumarins from Pterocaulon species.

The coumarins 5-methoxy-6,7-methylenedioxycoumarin 1 5-(3-methyl-2-butenyloxy)-6,7-methylenedioxycoumarin 2 and 5-(2,3-dihydroxy-3-methylbutyloxy)-6,7-methylenedioxycoumarin 3 isolated from Pterocaulon species showed significant cytotoxicity against two glioma cells lines. Compound 1 presented IC(50) values of 34.6 µM and 31.6 µM against human (U138-MG) and rat (C6) glioma cells, respectively, and this compound was at least two times more potent than compounds 2 and 3. This result could be explained by the planar conformation adopted by 1 through a non-classical hydrogen bond between a hydrogen of the methoxy and the oxygen of the methylenedioxy groups. Another important finding was that the cytotoxic effect induced by 1 in glioma cells was not observed in organotypic cultures, indicating a selective cytotoxicity for tumor cells.

Modified Stranski-Krastanov growth in Ge/Si heterostructures via nanostenciled pulsed laser deposition.

The combination of nanostenciling with pulsed laser deposition (PLD) provides a flexible, fast approach for patterning the growth of Ge on Si. Within each stencilled site, the morphological evolution of the Ge structures with deposition follows a modified Stranski-Krastanov (SK) growth mode. By systematically varying the PLD parameters (laser repetition rate and number of pulses) on two different substrate orientations (111 and 100), we have observed corresponding changes in growth morphology, strain and elemental composition using scanning electron microscopy, atomic force microscopy and µ-Raman spectroscopy. The growth behaviour is well predicted within a classical SK scheme, although the Si(100) growth exhibits significant relaxation and ripening with increasing coverage. Other novel aspects of the growth include the increased thickness of the wetting layer and the kinetic control of Si/Ge intermixing via the PLD repetition rate.

[18F]FDG-PET/CT monitoring early identifies advanced ovarian cancer patients who will benefit from prolonged neo-adjuvant chemotherapy.

AIM: The most accepted standard duration of neoadjuvant chemotherapy (na-CHT) before debulking surgery for advanced ovarian cancer (AOC) is 3 courses. However a percentage of patients could benefit from additional courses. [(18)F]FDG-PET/CT monitoring during na-CHT could predict early pathological response and allow the delivery of an optimal na-CHT duration. METHODS: Consecutive patients with AOC unsuitable for optimal up front surgery and fit for na-CHT were monitored by FDG-PET/CT at baseline and after 3 and 6 courses of carboplatin-paclitaxel CHT. At the end of na-CHT patients were re-evaluated to undergo definitive optimal surgery (i.e. without post-surgical residual disease). Percentage changes in maximal standardized uptake value (∆-SUVmax) were compared with the pathological response. Only patients with pathological complete response (pCR) or minimal residual disease (pMRD) were considered as pathological responders (pR), while all the other cases were considered non-responders (NR). RESULTS: Baseline FDG-PET/CT was abnormal in all 42 enrolled patients (median SUVmax 11, range 3-20). After 3 and 6 courses median SUVmax decreased to 3 (<2-21) and <2, i.e. value equal to normal surrounding tissues uptake (<2-17), respectively. After 3 courses, 17 (40%) patients presented ∆-SUVmax=100%, (i.e. SUVmax <2): 15 of them (88%) subsequently resulted pR and achieved no postsurgical residual disease at the end of na-CHT, while 2 (12%) were NR with postsurgical residual tumor ≤ 1cm. Out of 25 patients with ∆-SUVmax <100% after 3 courses, 6 (24%) were pR and 19 (76%) NR at the end of na-CHT. CONCLUSION: Patients with AOC who present normalization of SUVmax after 3 courses of na-CT have a high likelihood of benefiting from 3 additional courses in order to obtain pCR or pMDR and receiving optimal surgery.

An integrated approach to assess air pollution threats to cultural heritage in a semi-confined environment: the case study of Michelozzo's Courtyard in Florence (Italy).

An example of an integrated approach to assess air pollution threats to cultural heritage in a semi-confined environment is presented in this work, where the monitoring campaign carried out at the Michelozzo's Courtyard (in Palazzo Vecchio, Florence, Italy) is used as a case study. A wide research project was carried out, with the main aim of obtaining the first quantitative data on air quality and microclimate conditions inside the Courtyard, and, if possible, identifying the main causes of degradation and suggesting appropriate conservation strategies. The investigation adopted a holistic approach involving thermographic measurements on the wall paintings, microclimatic analysis, gaseous pollutant monitoring, atmospheric particles characterisation and dry deposition compositional analysis. Attention was focused on the wall painting depicting the city of Hall because of its anomalous and critical conservation conditions, which are visible at a glance, due to the contrast between a wide darker zone around the central subject of the painting and external lighter areas.

Effects of indomethacin-loaded nanocapsules in experimental models of inflammation in rats.

BACKGROUND AND PURPOSE: The effects of systemic treatment with indomethacin-loaded nanocapsules (IndOH-NC) were compared with those of free indomethacin (IndOH) in rat models of acute and chronic oedema. EXPERIMENTAL APPROACH: The following models of inflammation were employed: carrageenan-induced acute oedema (measured between 30 min and 4 h), sub-chronic oedema induced by complete Freund's adjuvant (CFA) (determined between 2 h and 72 h), and CFA-induced arthritis (oedema measured between 14 and 21 days). KEY RESULTS: IndOH or IndOH-NC produced equal inhibition of carrageenan-elicited oedema. However, IndOH-NC was more effective in both the sub-chronic (33 +/- 4% inhibition) and the arthritis (35 +/- 2% inhibition) model of oedema evoked by CFA, when compared with IndOH (21 +/- 2% and 14 +/- 3% inhibition respectively) (P < 0.01). In the CFA arthritis model, treatment with IndOH-NC markedly inhibited the serum levels of the pro-inflammatory cytokines tumour necrosis factor alpha and IL-6 (by 83 +/- 8% and 84 +/- 11% respectively), while the levels of the anti-inflammatory cytokine IL-10 were significantly increased (196 +/- 55%). The indices of gastrointestinal damage in IndOH-NC-treated animals were significantly less that those after IndOH treatment (58 +/- 16%, 72 +/- 6% and 69 +/- 2%, for duodenum, jejunum and ileum respectively). CONCLUSIONS AND IMPLICATIONS: IndOH-NC produced an increased anti-inflammatory efficacy in long-term models of inflammation, allied to an improved gastrointestinal safety. This formulation might represent a promising alternative for treating chronic inflammatory diseases, with reduced undesirable effects.

Crystallisation of amorphous germanium thin films.

By combining cross-sectional transmission and scanning electron microscopy with Raman scattering we have investigated the mechanism of nanocrystal formation in ultrathin amorphous SiO2/Ge/SiO2 trilayers grown by e-beam evaporation as a function of annealing temperature and a-Ge layer thickness. We observe that with decreasing a-Ge thickness the amorphous-to-crystalline (a-to-c) transition occurs at considerably higher temperatures, even avoiding crystallisation for very thin films below 2 nm thickness. Furthermore, we demonstrate that the formation of Ge nanocrystals by annealing at around 900 degrees C takes place driven by a liquid-mediated mechanism. As indicated by the observed microstructure, the metallic liquid film dewets from the surface forming droplets that upon cooling and under the influence of the SiO2 capping layer, solidify into barrel-type nanocrystals.