Innovative Photonic Sensors for Safety and Security, Part II: Aerospace and Submarine Applications.

The employability of photonics technology in the modern era's highly demanding and sophisticated domain of aerospace and submarines has been an appealing challenge for the scientific communities. In this paper, we review our main results achieved so far on the use of optical fiber sensors for safety and security in innovative aerospace and submarine applications. In particular, recent results of in-field applications of optical fiber sensors in aircraft monitoring, from a weight and balance analysis to vehicle Structural Health Monitoring (SHM) and Landing Gear (LG) monitoring, are presented and discussed. Moreover, underwater fiber-optic hydrophones are presented from the design to marine application.

Innovative Photonic Sensors for Safety and Security, Part I: Fundamentals, Infrastructural and Ground Transportations.

Our group, involving researchers from different universities in Campania, Italy, has been working for the last twenty years in the field of photonic sensors for safety and security in healthcare, industrial and environment applications. This is the first in a series of three companion papers. In this paper, we introduce the main concepts of the technologies employed for the realization of our photonic sensors. Then, we review our main results concerning the innovative applications for infrastructural and transportation monitoring.

Innovative Photonic Sensors for Safety and Security, Part III: Environment, Agriculture and Soil Monitoring.

In order to complete this set of three companion papers, in this last, we focus our attention on environmental monitoring by taking advantage of photonic technologies. After reporting on some configurations useful for high precision agriculture, we explore the problems connected with soil water content measurement and landslide early warning. Then, we concentrate on a new generation of seismic sensors useful in both terrestrial and under water contests. Finally, we discuss a number of optical fiber sensors for use in radiation environments.

Planar Optofluidic Integration of Ring Resonator and Microfluidic Channels.

We report an optofluidic hybrid silicon-polymer planar ring resonator with integrated microfluidic channels for efficient liquid delivery. The device features a planar architecture of intersecting liquid-core waveguides and microfluidic channels. A low-loss integration of microfluidic channels is accomplished by exploiting the interference pattern created by the self-imaging effect in the multimode interference-based coupler waveguides. Numerical simulations have been performed in order to minimize the propagation losses along the ring loop caused by the integration of microfluidic channels. The device has been fabricated and optically characterized by measuring the quality factor, obtaining a value of 4 × 103. This result is comparable with the quality factor of an optofluidic ring with the same optical layout but without integrated microfluidic channels, thus, confirming the suitability of the proposed approach for microfluidics integration in planar optofluidic design.

An integrated device for fast and sensitive immunosuppressant detection.

The present paper describes a compact point of care (POC) optical device for therapeutic drug monitoring (TDM). The core of the device is a disposable plastic chip where an immunoassay for the determination of immunosuppressants takes place. The chip is designed in order to have ten parallel microchannels allowing the simultaneous detection of more than one analyte with replicate measurements. The device is equipped with a microfluidic system, which provides sample mixing with the necessary chemicals and pumping samples, reagents and buffers into the measurement chip, and with integrated thin film amorphous silicon photodiodes for the fluorescence detection. Submicrometric fluorescent magnetic particles are used as support in the immunoassay in order to improve the efficiency of the assay. In particular, the magnetic feature is used to concentrate the antibody onto the sensing layer leading to a much faster implementation of the assay, while the fluorescent feature is used to increase the optical signal leading to a larger optical dynamic change and consequently a better sensitivity and a lower limit of detection. The design and development of the whole integrated optical device are here illustrated. In addition, detection of mycophenolic acid and cyclosporine A in spiked solutions and in microdialysate samples from patient blood with the implemented device are reported.

All-polymeric high-Q optofluidic Fabry-Perot resonator.

A full polymeric optofluidic Fabry-Perot (FP) resonator with a high quality factor (Q) is proposed and tested. The device is based on multilayer optical polymeric films that act as high reflectivity interference mirrors. The all-polymeric laminated structure avoids any deposition or etching process, simplifying the fabrication procedure while retaining a high quality optical surface. The measured quality factor of the FP resonator is 3.03×104, and the finesse is 91 around 700 nm. The refractometric sensing properties have been measured, and a sensitivity of 314 nm/RIU with a limit of detection of 2.55×10-5RIU could be achieved. The device exhibits a very high figure of merit of 1.36×104RIU-1 that is comparable with the performance attainable with sensors based on photonic crystal and whispering gallery mode resonators.

Selective coupling of Whispering Gallery Modes in film coated micro-resonators.

Whispering Gallery Mode (WGM) micro-resonators like microspheres or microtoroids are typically used as high-Q cavity substrate on which a functional film coating is deposited. In order to exploit the coating properties a critical step is the efficient excitation of WGMs mainly contained inside the deposited layer. We developed a simple method able to assess whether or not these modes are selectively excited. The method is based on monitoring the thermal shift of the excited resonance, which uniquely depends on the thermo-optic coefficient and on the thermal expansion coefficient of the material in which the mode is embedded.

Refractive index sensing by Brillouin scattering in side-polished optical fibers.

In this Letter, we demonstrate the possibility to measure the refractive index of a liquid, using the stimulating Brillouin scattering in a 3-cm-long side-polished optical fiber. In addition, we show that by depositing a high-refractive index layer on the polished surface the sensitivity of the Brillouin frequency shift (BFS) can be increased due to a higher penetration of the evanescent field in the outer medium. Experiments show a maximum BFS change of about 11 MHz when varying the refractive index of the external medium from 1 (air) to 1.402, and a BFS sensitivity to refractive index of about 293 MHz/RIU around 1.40.

Plasma functionalization procedure for antibody immobilization for SU-8 based sensor.

In this paper, we report the study on a new protocol for the immobilization process of antigen/antibody assay on SU-8 layers by oxygen plasma treatment. Plasma treatments, at different plasma powers and for different duration times, are performed and their effects on immobilization efficiency are studied. The chemical properties and the surface morphology of SU-8 before and after the functionalization and immobilization of (IgG) are then verified by Raman spectroscopy and atomic force microscopy (AFM). An increase of the surface roughness of SU-8 layers is observed after the oxygen plasma treatment and an intensity variation of functional groups is also evidenced. To demonstrate the validity of the process the distribution of IgG immobilized on SU-8 surfaces is detected by fluorescence microscopy measurement after incubation with fluorescein isothiocyanate (FITC)-tagged anti-human IgG. An increase of the amount of the adsorbed protein of about 20% and a good repeatability on antigen/antibody distribution on the surface are detected for IgG on plasma treated substrates. Finally, label free measurements are performed by SU-8 optical ring resonators reaching detection limits of 0.86ngcm(-2). The proposed approach offers a smart protocol for IgG immobilization on SU-8 substrate that can be easily extended to different antigen/antibody assay and polymeric materials for the realization of high performance immunosensors.

Water monitoring by optofluidic Raman spectroscopy for in situ applications.

The feasibility of water monitoring by Raman spectroscopy with a portable optofluidic system for in-situ applications has been successfully demonstrated. In the proposed approach, the sample under analysis is injected into a capillary nozzle in order to produce a liquid jet that acts as an optical waveguide. This jet waveguide provides an effective strategy to excite and collect the Raman signals arising from water contaminants due to the high refractive index difference between air and water. The proposed approach avoids any necessity of liquid container or flow cell and removes any background signal coming from the sample container commonly affects Raman measurements. Furthermore, this absence is a significant advantage for in situ measurements where fouling problems can be relevant and cleaning procedures are troublesome. The extreme simplicity and efficiency of the optical scheme adopted in our approach result in highly sensitive and rapid measurements that have been performed on different representative water pollutants. The experimental results demonstrate the high potentiality of our device in water quality monitoring and analysis. In particular, nitrate and sulfate are detected below the maximum contamination level allowed for drinking water, whereas a limit of detection of 40mg/l has been found for benzene.

Liquid Core ARROW Waveguides: A Promising Photonic Structure for Integrated Optofluidic Microsensors.

In this paper, we introduce a liquid core antiresonant reflecting optical waveguide (ARROW) as a novel optofluidic device that can be used to create innovative and highly functional microsensors. Liquid core ARROWs, with their dual ability to guide the light and the fluids in the same microchannel, have shown great potential as an optofluidic tool for quantitative spectroscopic analysis. ARROWs feature a planar architecture and, hence, are particularly attractive for chip scale integrated system. Step by step, several improvements have been made in recent years towards the implementation of these waveguides in a complete on-chip system for highly-sensitive detection down to the single molecule level. We review applications of liquid ARROWs for fluids sensing and discuss recent results and trends in the developments and applications of liquid ARROW in biomedical and biochemical research. The results outlined show that the strong light matter interaction occurring in the optofluidic channel of an ARROW and the versatility offered by the fabrication methods makes these waveguides a very promising building block for optofluidic sensor development.

Proposal of Brillouin optical frequency-domain reflectometry (BOFDR).

We demonstrate a Brillouin optical frequency-domain reflectometry (BOFDR) technique, which can measure the strain and/or temperature along an optical fiber with one-end access, by detecting the spontaneous Brillouin scattering from a sinusoidally modulated pump light. Compared to the Brillouin optical frequency-domain analysis (BOFDA), we show that BOFDR measurements are free from the distorting components related to acoustic wave modulation, thus simplifying data processing.

Micro flow cytometer with self-aligned 3D hydrodynamic focusing.

A micro flow cytometer with a single step 3D hydrodynamic flow focusing has been developed. The proposed design is capable to create a single-file particle stream that is self-aligned with an integrated optical fiber-based detection system, regardless of the flow rate ratio between the focusing and core liquids. The design approach provides the ability to adjust the stream size while keeping the position of the focused stream centered with respect to the focusing channel. The device has been fabricated by direct micro milling of PMMA sheets. Experimental validation of the hydrodynamic sheath focusing effect has been presented and sample stream with tuneable size from about 18 to 50 µm was measured. Flow cytometry measurements have been performed by using 10-23 µm fluorescent particles. From the analysis of the signals collected at each transit event we can confirm that the device was capable to align and measure microparticles with a good coefficient of variance.

Experimental and numerical study on stimulated Brillouin scattering in a graded-index multimode fiber.

Numerical and experimental results on stimulated Brillouin scattering (SBS) in a graded-index multimode silica fiber are reported. The Brillouin Gain Spectrum (BGS) is shown to strongly depend on the pump and probe modal content. By use of a numerical model, the BGS at varying launching conditions of both pump and probe beams is computed. Numerical results show that intramodal and intermodal SBS contribute to the overall BGS. Experiments confirm the numerical predictions.

A hybrid silicon-PDMS optofluidic platform for sensing applications.

A hybrid silicon-poly(dimethysiloxane) (PDMS) optofluidic platform for lab-on-a-chip applications is proposed. A liquid-core waveguide with a self-aligned solid-core waveguide and a microfluidic device are integrated with a multilayer approach, resulting in a three-dimensional device assembly. The optofluidic layer was fabricated with a hybrid silicon-polymer technology, whereas the microfluidic layer was fabricated with a soft lithography technique. The combination of different materials and fabrication processes allows a modular approach, enabling both the benefits from the high optical quality achievable with silicon technology and the low cost of polymer processing. The proposed chip has been tested for fluorescence measurements on Cy5 water solutions, demonstrating the possibility to obtain a limit of detection of 2.5 nM.

Optofluidic approaches for enhanced microsensor performances.

Optofluidics is a relatively young research field able to create a tight synergy between optics and micro/nano-fluidics. The high level of integration between fluidic and optical elements achievable by means of optofluidic approaches makes it possible to realize an innovative class of sensors, which have been demonstrated to have an improved sensitivity, adaptability and compactness. Many developments in this field have been made in the last years thanks to the availability of a new class of low cost materials and new technologies. This review describes the Italian state of art on optofluidic devices for sensing applications and offers a perspective for further future advances. We introduce the optofluidic concept and describe the advantages of merging photonic and fluidic elements, focusing on sensor developments for both environmental and biomedical monitoring.

High sensitivity UV fluorescence spectroscopy based on an optofluidic jet waveguide.

A novel spectroscopic sensor based on an optofluidic liquid jet waveguide is presented. In this device, a liquid jet waveguide is generated with the solution under analysis. This stream, exploiting total internal reflection, acts as an optical waveguide confining the autofluorescence light produced by chemical or biological samples when opportunely excited. Using a self-aligned configuration, the liquid jet is directly coupled with a multimode optical fiber collecting the fluorescence towards the detection system. Experimental measurements have been performed using an UV excitation source on water solutions containing representative water pollutants as aromatic hydrocarbons or bacteria showing very low limit of detection.

Real-time monitoring of railway traffic using slope-assisted Brillouin distributed sensors.

The application of a Brillouin distributed sensor for the monitoring of railway traffic is presented in this work. The field test is performed on the Italian regional line San Severo-Peschici, operated by Ferrovie del Gargano. A single-mode optical fiber sensor was attached along a rail length of about 60 m. The strain associated with train passage was acquired along the monitored rail length at 31 Hz acquisition rate and 1 m spatial resolution. The data acquired by the sensor demonstrates its capability of retrieving useful information in railway traffic monitoring, such as train identification, axle counting, speed detection, and dynamic load calculation.

Limitations and strategies to improve measurement accuracy in differential pulse-width pair Brillouin optical time-domain analysis sensing.

In this work, we analyze the effects of Brillouin gain and Brillouin frequency drifts on the accuracy of the differential pulse-width pair Brillouin optical time-domain analysis (DPP-BOTDA). In particular, we demonstrate numerically that the differential gain is highly sensitive to variations in the Brillouin gain and/or Brillouin shift occurring during the acquisition process, especially when operating with a small pulse pair duration difference. We also propose and demonstrate experimentally a method to compensate for these drifts and consequently improve measurement accuracy.

Optofluidic jet waveguide for laser-induced fluorescence spectroscopy.

An optofluidic water-jet waveguide on chip for fluorescence analysis is presented. A high-speed water stream produced by means of a microchannel acts at the same time as the solution to analyze and as the collecting optical waveguide. The absence of solid walls and the very optically smooth surface of the liquid stream permits a strong increase of the signal-to-noise ratio. The device layout allows a self-alignment direct coupling of a water-jet waveguide with a multimode optical fiber connected to the detector. The performances of the integrated system are tested on Cy5 water solutions. For a 4.5 mm long water-jet waveguide, the measured limit of detection (LOD) is 2.56 nM and filter-free detection is possible with an LOD of 6.11 nM.