Nickel Structures as a Template Strategy to Create Shaped Iridium Electrocatalysts for Electrochemical Water Splitting.

Low-cost, highly active, and highly stable catalysts are desired for the generation of hydrogen and oxygen using water electrolyzers. To enhance the kinetics of the oxygen evolution reaction in an acidic medium, it is of paramount importance to redesign iridium electrocatalysts into novel structures with organized morphology and high surface area. Here, we report on the designing of a well-defined and highly active hollow nanoframe based on iridium. The synthesis strategy was to control the shape of nickel nanostructures on which iridium nanoparticles will grow. After the growth of iridium on the surface, the next step was to etch the nickel core to form the NiIr hollow nanoframe. The etching procedure was found to be significant in controlling the hydroxide species on the iridium surface and by that affecting the performance. The catalytic performance of the NiIr hollow nanoframe was studied for oxygen evolution reaction and shows 29 times increased iridium mass activity compared to commercially available iridium-based catalysts. Our study provides novel insights to control the fabrication of iridium-shaped catalysts using 3d transition metal as a template and via a facile etching step to steer the formation of hydroxide species on the surface. These findings shall aid the community to finally create stable iridium alloys for polymer electrolyte membrane water electrolyzers, and the strategy is also useful for many other electrochemical devices such as batteries, fuel cells, sensors, and solar organic cells.

Direct Synthesis of Methyl Formate from CO2 With Phosphine-Based Polymer-Bound Ru Catalysts.

Methyl formate was produced in one pot through the hydrogenation of CO2 to formic acid/formate followed by an esterification step. The route offers the possibility to integrate renewable energy into the fossil-based chemical value chain. In this work, a phosphine-polymer-anchored Ru complex was shown to be an efficient solid catalyst for the direct hydrogenation of CO2 to methyl formate. The 1,2-bis(diphenylphosphino)ethane-like polymer presented the highest activity with a turnover number (TON) of up to 3401 at 160 °C. The reaction parameters were systemically investigated to optimize the reaction towards the formation of methyl formate. This catalyst could be reused seven times without a significant decrease in activity. Evolution of the catalytic Ru center during the reaction was revealed, and a possible reaction mechanism was proposed.

Hydrogenation of CO2 to Formate over Ruthenium Immobilized on Solid Molecular Phosphines.

Formic acid is a promising hydrogen storage medium and can be produced by catalytic hydrogenation of CO2 . Molecular ruthenium complexes immobilized on phosphine polymers have been found to exhibit excellent productivity and selectivity in the catalytic hydrogenation of CO2 under mild conditions. The polymeric analog of 1,2-bis(diphenylphosphino)ethane exhibited the highest activity and turnover numbers up to 13 170 were obtained in a single run. This catalyst was already active at 40 °C and with a catalyst loading of only 0.0006 mol %. Recycling experiments revealed a loss of activity after the first run, followed by a gradual decrease during the subsequent runs. This is attributed to a change in the catalytically active complex during the hydrogenation reaction. High selectivity towards formate and low leaching were maintained in the absence of CO formation. Based on the catalyst characterization, a mechanism for the CO2 hydrogenation is proposed.

Effect of Zinc Incorporation on the Performance of Red Light Emitting InP Core Nanocrystals.

This report presents a systematic study on the effect of zinc (Zn) carboxylate precursor on the structural and optical properties of red light emitting InP nanocrystals (NCs). NC cores were assessed using X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), energy-dispersive X-ray spectroscopy (EDX), and high-resolution transmission electron microscopy (HRTEM). When moderate Zn:In ratios in the reaction pot were used, the incorporation of Zn in InP was insufficient to change the crystal structure or band gap of the NCs, but photoluminescence quantum yield (PLQY) increased dramatically compared with pure InP NCs. Zn was found to incorporate mostly in the phosphate layer on the NCs. PL, PLQY, and time-resolved PL (TRPL) show that Zn carboxylates added to the precursors during NC cores facilitate the synthesis of high-quality InP NCs by suppressing nonradiative and sub-band-gap recombination, and the effect is visible also after a ZnS shell is grown on the cores.

Resistive Switching of Individual, Chemically Synthesized TiO2 Nanoparticles.

Resistively switching devices are considered promising for next-generation nonvolatile random-access memories. Today, such memories are fabricated by means of "top-down approaches" applying thin films sandwiched between nanoscaled electrodes. In contrast, this work presents a "bottom-up approach" disclosing for the first time the resistive switching (RS) of individual TiO2 nanoparticles (NPs). The NPs, which have sizes of 80 and 350 nm, respectively, are obtained by wet chemical synthesis and thermally treated under oxidizing or vacuum conditions for crystallization, respectively. These NPs are deposited on a Pt/Ir bottom electrode and individual NPs are electrically characterized by means of a nanomanipulator system in situ, in a scanning electron microscope. While amorphous NPs and calcined NPs reveal no switching hysteresis, a very interesting behavior is found for the vacuum-annealed, crystalline TiO(2-x) NPs. These NPs reveal forming-free RS behavior, dominantly complementary switching (CS) and, to a small degree, bipolar switching (BS) characteristics. In contrast, similarly vacuum-annealed TiO2 thin films grown by atomic layer deposition show standard BS behavior under the same conditions. The interesting CS behavior of the TiO(2-x) NPs is attributed to the formation of a core-shell-like structure by re-oxidation of the reduced NPs as a unique feature.

Understanding the role of single molecular ZnS precursors in the synthesis of In(Zn)P/ZnS nanocrystals.

Environmentally friendly nanocrystals (NCs) such as InP are in demand for various applications, such as biomedical labeling, solar cells, sensors, and light-emitting diodes (LEDs). To fulfill their potential applications, the synthesis of such high-quality "green" InP NCs required further improvement so as to achieve better stability, higher brightness NCs, and also to have a more robust synthesis route. The present study addresses our efforts on the synthesis of high-quality In(Zn)P/ZnS core-shell NCs using an air- and moisture-stable ZnS single molecular precursor (SMP) and In(Zn)P cores. The SMP method has recently emerged as a promising route for the surface overcoating of NCs due to its simplicity, high reproducibility, low reaction temperature, and flexibility in controlling the reaction. The synthesis involved heating the In(Zn)P core solution and Zn(S2CNR2) (where R = methyl, ethyl, butyl, or benzyl and referred to as ZDMT, ZDET, ZDBT, or ZDBzT, respectively) in oleylamine (OLA) to 90-250 °C for 0.5-2.5 h. In this work, we systematically studied the influence of different SMP end groups, the complex formation and stability between the SMP and oleylamine (OLA), the reaction temperature, and the amount of SMP on the synthesis of high-quality In(Zn)P/ZnS NCs. We found that thiocarbamate end groups are an important factor contributing to the low-temperature growth of high-quality In(Zn)P/ZnS NCs, as the end groups affect the polarity of the molecules and result in a different steric arrangement. We found that use of SMP with bulky end groups (ZDBzT) results in nanocrystals with higher photoluminescence quantum yield (PL QY) and better dispersibility than those synthesized with SMPs with the shorter alkyl chain groups (ZDMT, ZDET, or ZDBT). At the optimal conditions, the PL QY of red emission In(Zn)P/ZnS NCs is 55 ± 4%, which is one of the highest values reported. On the basis of structural (XAS, XPS, XRD, TEM) and optical characterization, we propose a mechanism for the growth of a ZnS shell on an In(Zn)P core.

Differential adsorption of gold nanoparticles to gold/palladium and platinum surfaces.

Integration of molecule-capped gold nanoparticles (AuNP) into nanoelectronic devices requires detailed knowledge about the AuNP-electrode interface. Here, we report the pH-dependent adsorption of amine or carboxylic acid-terminated gold nanoparticles on platinum or gold/palladium (30% Pd) alloy, respectively. We synthesized amine-terminated AuNP, applying a new solid phase supported approach, as well as AuNP exhibiting carboxylic acid as terminal groups. The pH-induced agglomeration of the synthesized AuNP was investigated by UV-vis, DLS, and ζ-potential measurements. Depending on the pH and the ionic strength of the AuNP solution a preferential adsorption on the different metals occurred. Thereby, we demonstrate that by choosing the appropriate functional group and adjusting the pH as well as the ionic strength a directed binding can be achieved, which is an essential prerequisite for applications of these particles in nanoelectronics. These findings will pave the way for a controlled designing of the interface between molecule-capped AuNP and metallic electrodes for applications in nanoelectronics.

The amyloid-ß oligomer count in cerebrospinal fluid is a biomarker for Alzheimer's disease.

Recent studies indicate that small amyloid-ß peptide (Aß) oligomers are the major toxic species responsible for development and progression of Alzheimer's disease (AD). Therefore, we suggest that the number of Aß oligomers in body fluids is the most direct and relevant biomarker for AD. Determination of the Aß oligomer content of cerebrospinal fluid (CSF) samples from 14 AD patients and 12 age-matched controls revealed a clear distinction between both groups. All samples of the control group showed homogenously low numbers of Aß oligomers, while the samples of the AD group exhibited significantly higher levels of Aß oligomers. The Aß oligomer numbers correlated with the patients' Mini-Mental State Examination scores. This indicates that the quantity of Aß oligomers in CSF reflects the severity of the disease and that Aß oligomers play a crucial role in AD pathology and in turn can be used as a diagnostic biomarker.

Electrically conducting nanopatterns formed by chemical e-beam lithography via gold nanoparticle seeds.

We report the formation of thiol nanopatterns on SAM covered silicon wafers by converting sulfonic acid head groups via e-beam lithography. These thiol groups act as binding sites for gold nanoparticles, which can be enhanced to form electrically conducting nanostructures. This approach serves as a proof-of-concept for the combination of top-down and bottom-up processes for the generation of electrical devices on silicon.