Estolides synthesis catalyzed by immobilized lipases.

Estolides are vegetable-oil-based lubricants obtained from oleic acid or any source of hydroxy fatty acids. In this work, the estolides synthesis from oleic acid and methyl ricinoleate (biodiesel from castor oil), using immobilized commercial lipases (Novozym 435, Lipozyme RM-IM, and Lipozyme TL-IM) in a solvent-free medium was investigated. Acid value was used to monitor the reaction progress by determining the consumption of acid present in the medium. Novozym 435 showed the best performance. Water removal improved the conversion. Novozym 435 was more active at atmospheric pressure. Novozym 435 was reused four times with conversion reaching 15% after the fourth reaction at 80°C. Estolides produced under the reaction conditions used in this work presented good properties, such as, low temperature properties as pour point (-24°C), viscosity (23.9 cSt at 40°C and 5.2 cSt at 100°C), and viscosity index (153).

Separation and immobilization of lipase from Penicillium simplicissimum by selective adsorption on hydrophobic supports.

Lipases are an enzyme class of a great importance as biocatalysts applied to organic chemistry. However, it is still necessary to search for new enzymes with special characteristics such as good stability towards high temperatures, organic solvents, and high stereoselectivity presence. The present work's aim was to immobilize the lipases pool produced by Penicillium simplissicimum, a filamentous fungi strain isolated from Brazilian babassu cake residue. P. simplissicimum lipases were separated into three different fractions using selective adsorption method on different hydrophobic supports (butyl-, phenyl-, and octyl-agarose) at low ionic strength. After immobilization, it was observed that these fractions' hyperactivation is in the range of 131% to 1133%. This phenomenon probably occurs due to enzyme open form stabilization when immobilized onto hydrophobic supports. Those fractions showed different thermal stability, specificity, and enantioselectivity towards some substrates. Enantiomeric ratio for the hydrolysis of (R,S) 2-O-butyryl-2-phenylacetic acid ranged from 1 to 7.9 for different immobilized P. simplissicimum lipase fractions. Asymmetry factor for diethyl 2-phenylmalonate hydrolysis ranged from 11.8 to 16.4 according to the immobilized P. simplissicimum lipase fractions. Those results showed that sequential adsorption methodology was an efficient strategy to obtain new biocatalysts with different enantioselectivity degrees, thermostability, and specificity prepared with a crude extract produced by a simple and low-cost technology.

Lipase production in solid-state fermentation monitoring biomass growth of aspergillus niger using digital image processing.

The aim of this study was to monitor the biomass growth of Aspergillus niger in solid-state fermentation (SSF) for lipase production using digital image processing technique. The strain A. niger 11T53A14 was cultivated in SSF using wheat bran as support, which was enriched with 0.91% (m/v) of ammonium sulfate. The addition of several vegetable oils (castor, soybean, olive, corn, and palm oils) was investigated to enhance lipase production. The maximum lipase activity was obtained using 2% (m/m) castor oil. In these conditions, the growth was evaluated each 24 h for 5 days by the glycosamine content analysis and digital image processing. Lipase activity was also determined. The results indicated that the digital image process technique can be used to monitor biomass growth in a SSF process and to correlate biomass growth and enzyme activity. In addition, the immobilized esterification lipase activity was determined for the butyl oleate synthesis, with and without 50% v/v hexane, resulting in 650 and 120 U/g, respectively. The enzyme was also used for transesterification of soybean oil and ethanol with maximum yield of 2.4%, after 30 min of reaction.

Immobilization of Yarrowia lipolytica lipase--a comparison of stability of physical adsorption and covalent attachment techniques.

Lipase immobilization offers unique advantages in terms of better process control, enhanced stability, predictable decay rates and improved economics. This work evaluated the immobilization of a highly active Yarrowia lipolytica lipase (YLL) by physical adsorption and covalent attachment. The enzyme was adsorbed on octyl-agarose and octadecyl-sepabeads supports by hydrophobic adsorption at low ionic strength and on MANAE-agarose support by ionic adsorption. CNBr-agarose was used as support for the covalent attachment immobilization. Immobilization yields of 71, 90 and 97% were obtained when Y. lipolytica lipase was immobilized into octyl-agarose, octadecyl-sepabeads and MANAE-agarose, respectively. However, the activity retention was lower (34% for octyl-agarose, 50% for octadecyl-sepabeads and 61% for MANAE-agarose), indicating that the immobilized lipase lost activity during immobilization procedures. Furthermore, immobilization by covalent attachment led to complete enzyme inactivation. Thermal deactivation was studied at a temperature range from 25 to 45 degrees C and pH varying from 5.0 to 9.0 and revealed that the hydrophobic adsorption on octadecyl-sepabeads produced an appreciable stabilization of the biocatalyst. The octadecyl-sepabeads biocatalyst was almost tenfold more stable than free lipase, and its thermal deactivation profile was also modified. On the other hand, the Y. lipolytica lipase immobilized on octyl-agarose and MANAE-agarose supports presented low stability, even less than the free enzyme.

Comparative studies of phenotypic and genetic characteristics between two desulfurizing isolates of Rhodococcus erythropolis and the well-characterized R. erythropolis strain IGTS8.

Two Rhodococcus erythropolis isolates, named A66 and A69, together with the well-characterized R. erythropolis strain IGTS8 were compared biochemically and genetically. Both isolates, like strain IGTS8, desulfurized DBT to 2-hydroxybiphenyl (2-HBP), following the 4S pathway of desulfurization. Strain IGTS8 showed the highest (81.5%) desulfurization activity in a medium containing DBT at 30 degrees C. Strain A66 showed approximately the same desulfurization activity either when incubated at 30 degrees C or at 37 degrees C, while strain A69 showed an increase of desulfurization efficiency (up to 79%) when incubated at 37 degrees C. Strains A66 and A69 were also able to grow using various organosulfur or organonitrogen-compounds as the sole sulfur or nitrogen sources. The biological responses of A66, A69 and IGTS8 strains to a series of mutagens and environmental agents were evaluated, trying to mimic actual circumstances involved in exposure/handling of microorganisms during petroleum biorefining. The results showed that strains A69 and IGTS8 were much more resistant to UVC treatment than A66. The three desulfurization genes (dszA, dszB and dszC) present in strains A66 and A69 were partially characterized. They seem to be located on a plasmid, not only in the strain IGTS8, but also in A66 and A69. PCR amplification was observed using specific primers for dsz genes in all the strains tested; however, no amplification product was observed using primers for carbazole (car) or quinoline (qor) metabolisms. All this information contributes to broaden our knowledge concerning both the desulfurization of DBT and the degradation of organonitrogen compounds within the R. erythropolis species.

Biodiesel fuel production by the transesterification reaction of soybean oil using immobilized lipase.

The enzymatic alcoholysis of soybean oil with methanol and ethanol was investigated using a commercial, immobilized lipase (Lipozyme RMIM). The effect of alcohol (methanol or ethanol), enzyme concentration, molar ratio of alcohol to soybean oil, solvent, and temperature on biodiesel production was determined. The best conditions were obtained in a solvent-free system with ethanol/oil molar ratio of 3.0, temperature of 50 degrees C, and enzyme concentration of 7.0% (w/w). Three-step batch ethanolysis was most effective for the production of biodiesel. Ethyl esters yield was about 60% after 4 h of reaction.

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase.

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro- 2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2- (1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1, 3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na2CO3 solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 UH/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 UH/mL solvent) and 5.0 mL of Na2CO3(sat) at 40 degrees C for 6 h.