Effect of talc and vitamin E TPGS on manufacturability, stability and release properties of trilaurin-based formulations for hot-melt coating.

This study was focused on one particular case of hot-melt coating with trilaurin - a solid medium-chain monoacid triglyceride. The challenge of using trilaurin as coating agent in melting-based processes is linked to its relatively low melting profile: 15.6 °C (Tm,α), 35.1 °C ( [Formula: see text] ) and 45.7 °C (Tm,ß). From a process perspective, the only possibility to generate products coated with formulations composed of trilaurin is by setting thermal operational conditions above Tm,α. From a material perspective, this processing possibility depends principally on trilaurin crystallisation which was investigated via a set of analytical techniques including turbidimetry, calorimetry, hot-melt goniometry, and polarised light microscopy. A highly soluble drug model substrate (sodium chloride crystals) was coated with three selected trilaurin-based formulations: (i) trilaurin, (ii) trilaurin plus talc, and (iii) trilaurin plus vitamin E TPGS and talc. Coated salt crystals were then analysed to investigate processing performance, coating quality, stability and release properties under digestion effect. The results show that firstly, talc addition promotes nucleation and crystal growth and, as a consequence, it facilitates the manufacture of trilaurin-based formulations. Secondly, the formulation of a solid triglyceride and a hydrophilic surfactant could potentially cause release instability, but formula (iii) was found to be stabilised by a mechanism whereby trilaurin crystallization enhanced in the presence of talc immobilised vitamin E TPGS in its crystal lattice. Thirdly, talc addition did not significantly influence trilaurin digestion which endows products with an immediate release in lipolytic conditions instead of an extended liberation in pure water. Nor did the addition of one or two additives alter the extent of trilaurin digestion under the conditions studied. These important findings relate to product manufacturability, stability, and release properties. A good understanding of material properties (e.g. crystallisation, polymorphism, digestibility) is essential for melt-processing, lipid coating stabilising and modulation of release profile of solid lipid-coated product, as demonstrated in this case study with trilaurin.

Evaluation of the Antimicrobial Activity of a Formulation Containing Ascorbic Acid and Eudragit FS 30D Microparticles for the Controlled Release of a Curcumin-Boric Acid Solid Dispersion in Turkey Poults Infected with Salmonella enteritidis: A Therapeutic Model.

The selection of components within a formulation or for treatment must stop being arbitrary and must be focused on scientific evidence that supports the inclusion of each one. Therefore, the objective of the present study was to obtain a formulation based on ascorbic acid (AA) and Eudragit FS 30D microparticles containing curcumin-boric acid (CUR-BA) considering interaction studies between the active components carried out via Fourier transform infrared spectrometry (FTIR) and differential scanning calorimetry (DSC) to minimize antagonistic effects, and comprehensively and effectively treat turkey poults infected with Salmonella enteritidis (S. enteritidis). The DSC and FTIR studies clearly demonstrated the interactions between AA, BA, and CUR. Consequently, the combination of AA with CUR and/or BA should be avoided, but not CUR and BA. Furthermore, the Eudragit FS 30D microparticles containing CUR-BA (SD CUR-BA MP) showed a limited release of CUR-BA in an acidic medium, but they were released at a pH 6.8-7.0, which reduced the interactions between CUR-BA and AA. Finally, in the S. enteritidis infection model, turkey poults treated with the combination of AA and SD CUR-BA MP presented lower counts of S. enteritidis in cecal tonsils after 10 days of treatment. These results pointed out that the use of an adequate combination of AA and CUR-BA as an integral treatment of S. enteritidis infections could be a viable option to replace the indiscriminate use of antibiotics.

Development and Stability of a New Formulation of Pentobarbital Suppositories for Paediatric Procedural Sedation.

Pentobarbital is a drug of choice to limit motion in children during paediatric procedural sedations (PPSs). However, despite the rectal route being preferred for infants and children, no pentobarbital suppositories are marketed, and therefore they must be prepared by compounding pharmacies. In this study, two suppository formulations of 30, 40, 50, and 60 mg of pentobarbital sodium were developed using hard-fat Witepsol® W25 either alone (formulation F1) or with oleic acid (formulation F2). The two formulations were subjected to the following tests described in the European Pharmacopoeia: uniformity of dosage units, softening time, resistance to rupture, and disintegration time. The stability of both formulations was also investigated for 41 weeks of storage at 5 ± 3 °C using a stability-indicating liquid chromatography method to quantify pentobarbital sodium and research breakdown product (BP). Although both formulae were compliant to uniformity of dosage, the results were in favour of a faster disintegration of F2 compared to F1 (-63%). On the other hand, F1 was found to be stable after 41 weeks of storage unlike F2 for which several new peaks were detected during the chromatographic analysis, suggesting a shorter stability of only 28 weeks. Both formulae still need to be clinically investigated to confirm their safety and efficiency for PPS.

Characterization, in vitro dissolution, and pharmacokinetics of different batches of efavirenz raw materials.

OBJECTIVE: To perform the solid-state characterization and the in vitro-in vivo correlation (IVIVC) of three batches of efavirenz (EFV) active pharmaceutical ingredients. SIGNIFICANCE: EFV is an effective anti-HIV drug. Due to the poor aqueous solubility, the rate and extent of EFV absorption deeply depend on its dissolution characteristics. METHODS: Thermal analyses, x-ray diffraction, and particle size distribution were performed. The saturation solubility and dissolution profiles were assessed in 0.5% (w/v) sodium lauryl sulfate (SLS), fasted-state simulated intestinal fluid (FaSSIF), and fed-state simulated intestinal fluid (FeSSIF) using a flow-through cell. Each batch was orally administered to Wistar rats and the pharmacokinetic parameters were correlated with those obtained from in vitro dissolution. RESULTS: All batches of EFV consisted polymorph I. EFV-A presented the lowest particle size distribution [d(v,0.5) = 197.8 µm; d(v,0.9) = 444.6 µm] followed by EFV-B [d(v,0.5) = 223.9 µm; d(v,0.9) = 481.1 µm], and EFV-C [d(v,0.5) = 240.8 µm; d(v,0.9) = 497.3 µm]. The saturated solubility in FaSSIF was 36% and 40% of that in FeSSIF and SLS, respectively. EFV-A presented the fastest rate and largest extension of dissolution than EFV-B and C (79.15%, 69.93% and 54.22%, respectively, as well as the highest maximum plasma concentration. Levels B, C, and multiple-C of IVIVC models were achieved. CONCLUSION: The FaSSIF medium discriminated the dissolution profiles of EFV APIs. Small differences in particle size distribution had a significant impact on the biopharmaceutical parameters of EFV, suggesting that strict control of such parameter is an important aspect during API development and drug formulation.

Organogel Nanoparticles as a New Way to Improve Oral Bioavailability of Poorly Soluble Compounds.

PURPOSE: The aim of the study was to evaluate organogel nanoparticles as a lipophilic vehicle to increase the oral bioavailability of poorly soluble compounds. Efavirenz (EFV), a Biopharmaceutical Classification System (BCS) Class II, was used as drug model. METHODS: Organogel nanoparticles loaded with EFV were formulated with sunflower oil, 12-hydroxystearic acid (HSA) and polyvinyl alcohol (PVA). Various parameters have been investigated in the current study such as (i) the release profile of organogel assessed by USP 4 cell flow dialysis, (ii) the impact of organogel on intestinal absorption, using Caco-2 cells as in vitro model and jejunum segments as ex vivo assay and (iii) the bioavailability of organogel following oral pharmacokinetic study. RESULTS: 250-300 nm spherical particles with a final concentration of 4.75 mg/mL drug loading were obtained, corresponding to a thousand fold increase in EFV solubility, combined to a very high encapsulation efficiency (>99.8%). Due to rapid diffusion, drug was immediately released from the nanoparticles. The biopharmaceutical evaluation on ex vivo jejunum segments demonstrated an increased absorption of EFV from organogel nanoparticles compare to a native EFV suspension. In vitro assays combining Caco-2 cell cultures with TEM and confocal microscopy demonstrated passive diffusion, while paracellular integrity and endocytosis activity remain expelled. Oral pharmacokinetics of EFV organogel nanoparticles improve oral bioavailability (Fr: 249%) and quick absorption compared to EFV suspension. CONCLUSION: Organogel nanoparticles increase the bioavailability of BCS Class II drugs. The main phenomena is simply oil transfer from the gelled particles through the cell membrane.

Evaluation of a Bacillus -Based Direct-Fed Microbial on Aflatoxin B1 Toxic Effects, Performance, Immunologic Status, and Serum Biochemical Parameters in Broiler Chickens.

The aim of the present study was to evaluate the effect of a commercial Bacillus direct-fed microbial (DFM) on aflatoxin B1 toxic effects, performance, and biochemical and immunologic parameters in broiler chickens. Ninety 1-day-old Cobb 500 male broiler chicks were raised in floor pens for a period of 21 days. Chicks were neck-tagged, individually weighed, and randomly allocated to one of three groups: Negative control (basal feed), aflatoxin B1 (basal feed + 2 ppm AFB1), and DFM (basal feed + 2 ppm AFB1 + Bacillus direct-fed microbial). Each group had three replicates of 10 chickens (n = 30/group). Body weight and body weight gain were calculated weekly, while feed intake and feed conversion ratio were determined when broilers were 21 days old. On day 21, all chickens were bled, gastrointestinal samples were collected, and spleen and bursa of Fabricius were weighed. This study confirmed that 2 ppm of AFB1 causes severe detrimental effects on performance, biochemical parameters, and immunologic parameters, generating hepatic lesions in broiler chickens (P < 0.05). However, it was also observed that DFM supplementation provided beneficial effects that might help to improve gut barrier function, anti-inflammatory and antioxidant activities, as well as humoral and cellular immunomodulation. The results of the present study suggest that this Bacillus-DFM added at a concentration of 106 spores/gram of feed can be used to counteract the negative effects that occur when birds consume diets contaminated with AFB1, showing beneficial effects on performance parameters, relative organ weights, hepatic lesions, immune response, and serum biochemical variables. The addition of this Bacillus-DFM might mitigate and decrease aflatoxicosis problems in the poultry industry, improving food security, alleviating public health problems, and providing economic benefits. Future studies are needed to fully elucidate the specific mechanisms by which this Bacillus-DFM counteracts the toxic effects of aflatoxin B1.

Evaluación de un producto comercial adicionado en el alimento elaborado con Bacillus sobre los efectos tóxicos de la aflatoxina B1, el rendimiento productivo, el estado inmunológico y los parámetros bioquímicos en suero de pollos de engorde. El objetivo del presente estudio fue evaluar el efecto de un producto comercial de Bacillus adicionado al alimento (DFM) sobre los efectos tóxicos de la aflatoxina B1, el rendimiento productivo, así como en los parámetros bioquímicos e inmunológicos en pollos de engorde. Noventa pollitos de engorde machos Cobb 500 de un día de edad fueron criados en corrales en piso por un período de 21 días. Los pollos se etiquetaron en el cuello, se pesaron individualmente y se asignaron al azar en uno de tres grupos: control negativo (alimentación basal); aflatoxina B1 (alimentación basal + 2 ppm de AFB1) y DFM (alimentación basal + 2 ppm de AFB1 + producto comercial de Bacillus). Cada grupo tenía tres réplicas de 10 pollos (n = 30/grupo). El peso corporal (BW) y la ganancia de peso corporal (BWG) se calcularon semanalmente, mientras que la ingesta de alimento (FI) y la conversión alimentaria (FCR) se determinaron cuando los pollos tenían 21 días de edad. Al día 21 de edad, todos los pollos se sangraron, se recolectaron muestras gastrointestinales y se pesaron el bazo y la bolsa de Fabricio. Este estudio confirmó que 2 ppm de aflatoxina B1 causan efectos detrimentales graves sobre los parámetros productivos, bioquímicos e inmunológicos, generando lesiones hepáticas en pollos de engorde (P < 0.05). Sin embargo, también se observó que la suplementación con el producto comercial de Bacillus proporcionó efectos benéficos que podrían ayudar a mejorar la función de la barrera intestinal, las actividades antiinflamatorias y antioxidantes, así como la inmunomodulación humoral y celular. Los resultados del presente estudio sugieren que este producto comercial de Bacillus agregado a una concentración de 106 esporas/gramo de alimento puede usarse para contrarrestar los efectos negativos que se producen cuando las aves consumen dietas contaminadas con aflatoxina B1, mostrando efectos beneficiosos en los parámetros productivos, peso relativo de órganos, lesiones hepáticas, respuesta inmune y variables bioquímicas séricas. La adición de este Bacillus podría mitigar y disminuir los problemas de aflatoxicosis en la industria avícola, mejorando la seguridad alimentaria, los problemas de salud pública y los beneficios económicos. Se requieren estudios futuros para dilucidar completamente los mecanismos específicos por los cuales este producto comercial con Bacillus contrarresta los efectos tóxicos de la aflatoxina B1.

Evaluation of Cellulosic Polymers and Curcumin to Reduce Aflatoxin B1 Toxic Effects on Performance, Biochemical, and Immunological Parameters of Broiler Chickens.

To evaluate the effect of cellulosic polymers (CEL) and curcumin (CUR) on aflatoxin B1 (AFB1) toxic effects on performance, and the biochemical and immunological parameters in broiler chickens, 150 one-day-old male broiler chicks were randomly allocated into five groups with three replicates of 10 chickens per pen: Negative Control (feed); AFB1 (feed + 2 ppm AFB1); CUR (feed + 2 ppm AFB1 + Curcumin 0.2%); CEL (feed + 2 ppm AFB1 + 0.3% Cellulosic polymers); and, CEL + CUR (feed + 2 ppm AFB1 + 0.3% Cellulose polymers + 0.2% Curcumin). Every week, body weight, body weight gain, feed intake, and feed conversion ratio were calculated. On day 21, liver, spleen, bursa of Fabricius, and intestine from five broilers per replicate per group were removed to obtain relative organ weight. Histopathological changes in liver, several biochemical biomarkers, antibody titers, and muscle and skin pigmentation were also recorded. Dietary addition of 0.3% CEL and 0.2% CUR separately significantly diminished some of the toxic effects resulting from AFB1 on performance parameters, relative organs weight, histopathology, immune response, and serum biochemical variables (P < 0.05); however, the combination of CUR and CEL showed a better-integrated approach for the management of poultry health problems that are related with the consumption of AFB1, since they have different mechanisms of action with different positive effects on the responses of broiler chickens.

Retrograded starch/pectin coated gellan gum-microparticles for oral administration of insulin: A technological platform for protection against enzymatic degradation and improvement of intestinal permeability.

Gellan gum microparticles coated with colon-specific films based on retrograded starch and pectin was developed for enhancing the oral release of insulin (INS). The system developed promoted an impressive protection of INS (80%) after 120 min of incubation with trypsin and alpha-chymotrypsin, while only 3% of free INS remained intact after the same time, possibility due to the calcium chelating activity of the polymers in inhibiting the proteolytic activity. In vitro INS release in media simulating the gastrointestinal portions revealed a pH-dependent behavior, as well as the significance of the coating in lowering the release rates in relation to their counterparts. The permeability of INS on Caco-2 cells monolayers and excised rat intestine were significantly improved, mainly due to the influence of the anionic polymers on tight junctions opening, along with the excellent mucoadhesive properties of the gellan gum. All these features together contributed greatly to the hypoglycemic effect observed after the oral administration of the INS-loaded MP in diabetic rats, with reduction of up to 51% of blood glucose levels. The important findings of this work should contribute to the advances about the search of alternatives for oral administration of INS.

Atomization of denatured whey proteins as a novel and simple way to improve oral drug delivery system properties.

In the sphere of drug delivery, denatured whey protein (DWP) has in recent times gained press. However, to date, no scalable and affordable dosage form has been developed. The objective of our study was to evaluate the potential use of spray-dried DWP as a ready to use excipient for oral drug delivery. Therefore, solid state, FTIR spectra and wettability were studied. Dissolution, mucoadhesion and the effect on paracellular permeability were also evaluated. The spray-dried DWP particles were spherical with 4µm mean diameter. Further, relative to native WP, the spray-dried DWP particles bore reduced wettability, and their structure was characterized by the exposure of a high amount of free thiol and by the formation of intermolecular ß-sheets. The DWP powders were mucoadhesive, enzymatic inhibitors, biocompatible and they induced the opening of tight junctions. Our study shows great potential for the use of spray-drying as a technique to modify the dissolution rate of drugs and enhance the oral bioavailability of molecules. That is, the use of spray drying as a single step ready to use DWP excipient.

Molecular and biopharmaceutical investigation of alginate-inulin synbiotic coencapsulation of probiotic to target the colon.

Colon targeting, as a site-specific delivery for oral formulation, remains a major challenge, especially for sensitive bioactive components such as therapeutic forms of phages, live attenuated virus and prebiotics-probiotics association. Synbiotics could be used to protect encapsulated probiotics during the gastrointestinal tract and control their release in the colon. To achieve these goals, effective prebiotics, such as inulin, could be combined with alginate - the most exploited polymer used for probiotic encapsulation - in the form of beads. This work aimed to study the biopharmaceutical behaviour of alginate beads (A) and inulin-alginate beads of different inulin concentrations (5 or 20%) in 2% alginate (AI5, AI20). Beads were loaded with three probiotic strains (Pediococcus acidilactici Ul5, Lactobacillus reuteri and Lactobacillus salivarius). Dissolution of beads was studied by USP4 under conditions simulating the gastrointestinal condition. The survival rates of the bacterial strains were measured by a specific qPCR bacterial count. Mucoadhesiveness of beads was studied by an ex vivo method using intestinal mucosa. To understand the behaviour of each formulation, the ultrastructure of the polymeric network was studied using scanning electron microscopy (SEM). Molecular interactions between alginate and inulin were studied by Fourier transform infra-red spectroscopy (FTIR). Dissolution results suggested that the presence of inulin in beads provided more protection for the tested bacterial strains against the acidic pH. AI5 was the most effective formulation to deliver probiotics to the colon simulation conditions. FTIR and SEM investigations explained the differences in behaviour of each formula. The developed symbiotic form provided a promising matrix for the development of colonic controlled release systems.

Evaluation of Chitosan and Cellulosic Polymers as Binding Adsorbent Materials to Prevent Aflatoxin B1, Fumonisin B1, Ochratoxin, Trichothecene, Deoxynivalenol, and Zearalenone Mycotoxicoses Through an In Vitro Gastrointestinal Model for Poultry.

Mycotoxins are secondary toxic metabolites that are produced by fungi representing threats to human and animal health. The objective of this study was to evaluate the adsorption capacity of Chitosan (CHI), and three cellulosic polymers (HPMC, CMC, and MCC), on six mycotoxins (AFB1; FUB1; OTA; T-2; DON; and, ZEA) using an in vitro digestive model for poultry. The adsorbent capacity of the materials in the supernatant of each compartment was evaluated by a non-competitive chemiluminescent assay. Control groups with no adsorbent material had an adsorption value of 0.00% against all six mycotoxins that were evaluated. All four materials tested showed significant (p < 0.05) binding activity against all of the mycotoxins when compared with the control non-treated group. However HPMC, CMC, and MCC showed better adsorbent capacity when compared with CHI.

Denatured Whey Protein Powder as a New Matrix Excipient: Design and Evaluation of Mucoadhesive Tablets for Sustained Drug Release Applications.

PURPOSE: In earlier study, we proposed denatured whey protein (DWP) powder obtained by atomization as a new excipient to promote oral drug delivery. In this work, we evaluate the possibility to formulate tablets based on DWP powders and to characterize their role as a matrix mucoadhesive excipient. METHODS: Tablets containing increased amount of DWP (10 to 30%) were produced by direct compression after mixing with theophylline, microcrystalline cellulose, Aerosil® and magnesium stearate. Dissolution behaviors of obtained tablets were evaluated in different USP buffers (pH 1.2, 4.5 and 6.8) and in simulated gastric and intestinal fluids and mechanisms analyzed by multiple mathematical models. Swelling, erosion and mucoadhesion were also evaluated. Finally, release and absorption were studied in the artificial digestive system (TIM 1). RESULTS: Tablets based on DWP and containing 300 mg of theophylline were obtained by direct compression. These tablets exhibited controlled release driven by diffusion starting from 15% DWP content whatever the pH studied. They also showed a great extent of swelling and water uptake while matrix weight loss was limited. Addition of enzymes accelerated drug release which became governed by erosion according to Peppas model. CONCLUSIONS: The present study shows that DWP powders can be successfully used as a pharmaceutical excipient, and in particular as a matrix mucoadhesive controlled release tablets.

A prebiotic matrix for encapsulation of probiotics: physicochemical and microbiological study.

This work aims to develop an encapsulated oral-synbiotic supplement by studying the effect of adding inulin in alginate beads and observing its ability to protect three probiotic strains: Pediocucus acidilactici, Lactobacillus reuteri and Lactobacillus salivarius. Beads of different inulin concentrations 0%, 5%, 10%, 15% and 20% (w/v) in 2% (w/v) alginate solution were prepared by the extrusion/ionotropic gelation method. Polymer distribution within beads was characterised using confocal laser scanning microscopy. Interactions between alginate and inulin were monitored by Fourier transform infra-red spectroscopy (FTIR). Effect of encapsulation on viability, antimicrobial ability, acid tolerance and bile tolerance of probiotic strains were investigated. Antimicrobial and probiotic properties of bacterial strains were not affected by encapsulation. Bacterial protection against acidity was increased by adding inulin. Beads with 5% w/v inulin were the most effective in bacterial protection against bile-salts. To our knowledge, this work is the first to use such high concentrations of inulin.

Development and validation of a new dynamic computer-controlled model of the human stomach and small intestine.

For ethical, regulatory, and economic reasons, in vitro human digestion models are increasingly used as an alternative to in vivo assays. This study aims to present the new Engineered Stomach and small INtestine (ESIN) model and its validation for pharmaceutical applications. This dynamic computer-controlled system reproduces, according to in vivo data, the complex physiology of the human stomach and small intestine, including pH, transit times, chyme mixing, digestive secretions, and passive absorption of digestion products. Its innovative design allows a progressive meal intake and the differential gastric emptying of solids and liquids. The pharmaceutical behavior of two model drugs (paracetamol immediate release form and theophylline sustained release tablet) was studied in ESIN during liquid digestion. The results were compared to those found with a classical compendial method (paddle apparatus) and in human volunteers. Paracetamol and theophylline tablets showed similar absorption profiles in ESIN and in healthy subjects. For theophylline, a level A in vitro-in vivo correlation could be established between the results obtained in ESIN and in humans. Interestingly, using a pharmaceutical basket, the swelling and erosion of the theophylline sustained release form was followed during transit throughout ESIN. ESIN emerges as a relevant tool for pharmaceutical studies but once further validated may find many other applications in nutritional, toxicological, and microbiological fields. Biotechnol. Bioeng. 2016;113: 1325-1335. © 2015 Wiley Periodicals, Inc.

Whey protein mucoadhesive properties for oral drug delivery: Mucin-whey protein interaction and mucoadhesive bond strength.

Whey protein is a natural polymer recently used as an excipient in buccoadhesive tablets but its mucoadhesive properties were barely studied. In this work, we characterize mucoadhesion of whey protein in order to determine the mechanisms and optimal conditions for use as excipient in oral drug delivery. Thus, native and denatured whey protein (NWP and DWP) were investigated and the effect of concentration and pH were also studied. Many methods of characterization were selected to allow the study of chemical and physical interactions with mucin and then the results were bound with an ex vivo experiments. Turbidity of WP-mucin mixture increased at acidic pH 1.2 till 4.5 indicating interaction with mucin but not at pH 6.8. No interaction with mucin was also found by ITC method at pH 6.8 for native and denatured whey protein used at 1% (w/w). Forces of bioadhesion evaluated by viscosity measurements were the best for high concentrated (10.8%) DWP solutions at pH 6.8 and were low at pH 1.2 for NWP and DWP solutions. Addition of chemical blockers indicated that hydrogen bondings and disulfide bridges were the main mechanisms of interactions with mucin. Reticulation of DWP with calcium ions to obtain microparticles (MP) did not influence the ability of interaction with mucin as shown by FTIR analysis. These results correlated with ex vivo study on rat tissue demonstrating important adhesion (75%) of WP MP on the intestine and null on the stomach after 2h of deposit.

Improved bioavailability of vitamin D3 using a ß-lactoglobulin-based coagulum.

Vitamin D3 (D3) was encapsulated within a water-soluble matrix, formed by promoting the ßlg/D3 complex by acidification. The capacity of the ßlg-based coagulum to increase the long term stability of D3 in cold storage, upon exposure to intensive UV-light, and in the presence and absence of intestinal proteases, was evaluated. Additionally, the impact of the sequestration of D3 within the matrix of ßlg-based coagulum on its bioavailability was determined in vivo with force-fed rats. The water solubility, long-term storage and UV-light stability of D3 were significantly increased (p < 0.0001) due to the high encapsulation efficiency (94.5 ± 1.8%). The ßlg-based coagulum was not rapidly disrupted by the proteases in the intestines, leading to a slow release of D3, increased uptake of D3 and subsequent enhancement of the bioavailability of D3 in rats.

Self-assembly of ß-lactoglobulin and egg white lysozyme as a potential carrier for nutraceuticals.

Self-assembly structures of ß-lactoglobulin (ßlg) and egg protein lysozyme (Lyso) were developed, using electrostatic interactions between the two oppositely charged proteins. Different ßlg/Lyso concentration ratios were essayed at pH 6.8 to select the optimal ratio for the proteins co-precipitation, which behaviour was then studied at varying pH values. Optimal ßlg/Lyso concentration ratio, prepared at pH 7.5, was selected for protein co-precipitation. As a result, a structure with a mean diameter of 7.1±2.5 µm was formed, as indicated by static light scattering. Furthermore, the SEM images showed that ßlg and Lyso self-assembled to form a microsphere. Vitamin D3, used as a model nutraceutical, was successfully entrapped in the ßlg/Lyso microspheres with an encapsulation efficiency of 90.8±4.8%. Therefore, the ßlg/Lyso microspheres can serve as a potential food-grade vehicle for bioactives in the formulation of food products and pharmaceuticals.

Food protein-based microspheres for increased uptake of vitamin D3.

To protect vitamin D3 during cold storage and exposure to UV-light, vitamin D3 has been entrapped in microspheres formed by bovine protein ß-lactoglobulin (ßlg) and lysozyme (Lyso) from egg white. The behaviour of the ßlg/Lyso microspheres in simulated intestinal fluid and their impact on the kinetic release of D3 were determined. The impact of the D3-loaded ßlg/Lyso microspheres on the bioavailability of D3 was evaluated in vivo by force-feeding rats. The data indicate that the ßlg/Lyso microspheres effectively improved the stability of D3, which was readily released in the intestines. The release kinetics were accelerated in the presence of proteolytic enzymes. The bioavailability of D3 was improved, as confirmed by the significant increase in the serum levels of 25-hydroxy-D3 in rats. The current work demonstrates that water soluble proteins were used to substantially increase the bioavailability of the lipophilic vitamin, and thus can serve in the oral delivery of D3.

Micelle dynamic simulation and physicochemical characterization of biorelevant media to reflect gastrointestinal environment in fasted and fed states.

The characterization of biorelevant media simulating the upper part of the gastrointestinal tract in the fasted and fed states was investigated by classical determination of physicochemical parameters such as pH, osmolality, surface tension and results were compared to in vivo physiological data. Incorporation of fatty material, in order to better simulate the influence of high fat meal was also performed. Stability and characterization of this medium was studied and compared to classical FeSSIF. Micelle characterization and computer dynamic simulation were performed in order to understand the interaction between lecithin and taurocholate and possible interactions between mixed micelle and drugs. The addition of NaTc, lecithin, and/or fatty materials has no influence on pH and osmolality, whereas the presence of fatty material modifies the surface tension. Values of FaSSIF and FeSSIF are in accordance with in vivo parameters and the presence of micelles can simulate the gastrointestinal environment. Modelization of micelles by computer simulation led to a model of mixed micelles in which structures of NaTc interact either by their hydrophilic or hydrophobic phase to give a bilayer stable model in which the lecithin molecule can insert its long carbon chain. The micelle structure is stable and can enhance dissolution of hydrophobic molecules by hydrophobic interaction with the numerous hydrophobic spaces available in the multilayer hydrophilic/hydrophobic layer.

Development of a novel drug delivery system: chitosan nanoparticles entrapped in alginate microparticles.

A novel carrier using chitosan nanoparticles entrapped into alginate microparticles is proposed for protecting molecules of interest from degradation in the digestive tract. The effects of polymer concentration, sonication, stirring, pH, and processing conditions on the physical characteristics of the carrier were studied. FITC and RBITC were used to localise the polymers within particles using CLSM. Diffusion of amaranth red (AR) from nanoparticles was quantified during dissolution under gastric and intestinal conditions. Under optimal preparation conditions, the size distribution of nanoparticles loaded with AR was uniform (690 nm) with an encapsulation efficacy of 21.9%. Alginate microparticles (285 µm) containing a homogenous distribution of nanoparticles and polymers were obtained. At gastric pH, the carrier released less than 5% of the loaded AR and, at intestinal pH, the release was rapid and complete. The drug carriers developed shows a promising use as a vehicle suitable to protect molecules of interest after oral administration.