Evaluation of Bone Response to a Nano HA Implant Surface on Sinus Lifting Procedures: Study in Rabbits.

The aim of this study was to evaluate the bone response to two different implant surfaces on sinus lift procedures in rabbits. Bilateral sinus lifting with inorganic bovine bone associated with collagen membrane and immediate implantation were performed in 16 rabbits. Custom mini-implants were randomly installed in the prepared sites: one side received a double acid-etched (DAE) surface and the other a nano-hydroxyapatite (NHA) surface. The animals were euthanized 30 and 60 days after surgery, and biopsies were collected for microtomographic and histomorphometric analysis. After 30 days, no intra- and inter-group statistical differences were observed in microtomographic analysis, while at 60 days, bone analysis showed statistically significant differences between groups (p < 0.05) for all the evaluated parameters. Histomorphometric analysis showed, after 30 days, mean % of Bone-to-Implant Contact (BIC) for DAE and NHA of 31.70 ± 10.42% vs. 40.60 ± 10.22% (p > 0.05), respectively; for % of Bone Area Fraction Occupancy (BAFO), mean values were 45.43 ± 3.597% for DAE and 57.04 ± 5.537% for NHA (p < 0.05). After 60 days, mean %BIC and %BAFO for DAE and NHA implants were statistically significant (p < 0.05). The NHA surface showed superior biological features compared to the DAE treatment, promoting higher bone formation around the implants in an experimental model of bone repair in a grafted area.

Titanium-enriched medium drives low profile of ECM remodeling as a pre-requisite to pre-osteoblast viability and proliferative phenotype.

Titanium is widely used for biomedical applications, but little information is being delivered regarding the cellular/molecular mechanisms explaining their efficacy, mainly considering the effects of the Ti-released trace elements on pre-osteoblasts. We addressed this issue by investigating decisive intracellular signal transduction able to modulate cytoskeleton rearrangement, proliferative phenotype and extracellular matrix (ECM) remodeling. We considered titanium grades IV and V, submitted or not to dual acid-etching (w/DAE or wo/DAE, respectively). Our results showed there is no cytotoxicity, preserving AKT involvement. Additionally, Ti-enriched medium promoted a diminution of the downstream signaling upon integrin activation (phosphorylating Rac1 and cofilin), guaranteeing a dynamic cytoskeleton rearrangement. Moreover, the low profile of ECM remodeling obtained in response to trace molecules released by Ti-based devices seems contributing to the osteoblast performance in mediating extracellular support to cell anchorage. This hypothesis was validated by the up-expression of ß1-integrin, src and Focal adhesion kinase (fak) genes, mainly in response to titanium grade V. Proliferative phenotype showed an unbalance between cyclin-dependent kinases (CDKs) and p15INK4b/p21Cip1. In conjunction, we showed for the first time that trace elements from Ti-based biomedical devices provoke important modulation of the osteoblast biology, driving cell anchoring, viability, and proliferative phenotype. Certainly, these biological outcomes compromise implant osseointegration.

Zirconia stimulates ECM-remodeling as a prerequisite to pre-osteoblast adhesion/proliferation by possible interference with cellular anchorage.

The biological response to zirconia (ZrO2) is not completely understood, which prompted us to address its effect on pre-osteoblastic cells in both direct and indirect manner. Our results showed that zirconia triggers important intracellular signaling mainly by governing survival signals which leads to cell adhesion and proliferation by modulating signaling cascade responsible for dynamic cytoskeleton rearrangement, as observed by fluorescence microscopy. The phosphorylations of Focal Adhesion Kinase (FAK) and Rac1 decreased in response to ZrO2 enriched medium. This corroborates the result of the crystal violet assay, which indicated a significant decrease of pre-osteoblast adhesion in responding to ZrO2 enriched medium. However, we credit this decrease on pre-osteoblast adhesion to the need to govern intracellular repertory of intracellular pathways involved with cell cycle progression, because we found a significant up-phosphorylation of Mitogen-Activated Protein Kinase (MAPK)-p38 and Cyclin-dependent kinase 2 (CDK2), while p15 (a cell cycle suppressor) decreased. Importantly, Protein phosphatase 2 A (PP2A) activity decreased, guaranteeing the significant up-phosphorylation of MAPK -p38 in response to ZrO2 enriched medium. Complementarily, there was a regulation of Matrix Metalloproteinases (MMPs) in response to Zirconia and this remodeling could affect cell phenotype by interfering on cell anchorage. Altogether, our results show a repertory of signaling molecules, which suggests that ECM remodel as a pre-requisite to pre-osteoblast phenotype by affecting their anchoring in responding to zirconia.

Bone Remodeling Around Implants with External Hexagon and Morse-Taper Connections: A Randomized, Controlled, Split-Mouth, Clinical Trial.

OBJECTIVES: To evaluate clinical, radiographic, microbiologic, and biomechanical parameters related to bone remodeling around implants with external hexagon (EH) and Morse-taper (MT) connections. MATERIALS AND METHODS: Twelve totally edentulous patients received four custom-made implants in the interforaminal region of the mandible. Two of those implants had the same macroscopic design, but different prosthetic connections. All patients received an immediate implant-supported prosthesis. Clinical parameters (periimplant probing pocket depth (PPD), modified gingival index (mGI), and mucosal thickness (MTh)) were evaluated at 12 months follow-up. The distance between the top of the implant and the first bone-to-implant contact (IT-FBIC) was evaluated on standardized digital peri-apical radiographs acquired at 1, 3, 6, and 12 months follow-up. Samples of the subgingival microbiota were collected 1, 3, and 6 months after implant loading and used for the quantification of Tanerella forsythia, Porphyromonas gingivalis, Aggragatibacter actinomycetemcomitans, Prevotella intermedia, and Fusobacterium nucleatum. Further, 36 computerized-tomography based finite element (FE) models were accomplished, simulating each patient under three loading conditions. RESULTS: The evaluated clinical parameters were equal for EH and MT implants. Mean IT-FBIC was significantly different between the tested connections (1.17 ± 0.44 mm for EH, and 0.17 ± 0.54 mm for MT, considering all evaluated time periods). No significant microbiological differences could be observed between tested connections. FE analysis showed a significantly higher peak of equivalent (EQV) strain (p = 0.005) for EH (mean 3,438.65 µÎµ) compared to MT (mean 840.98 µÎµ) connection. CONCLUSIONS: Radiographic periimplant bone loss depends on the implant connection type. MT connections showed less periimplant bone loss, compared to EH connections.

Avaliação funcional de implantes por mineralização óssea in vitro / Functional evaluation of implants by bone mineralization in vitrot

A evolução do projeto dos implantes osseointegráveis é resultado do desenvolvimento de diferentes tipos de estruturas em sua superfície. No entanto, ainda existe a necessidade de estudos para definir o tipo de superfície ideal. Esse trabalho discute métodos de avaliação da superfície de implantes que mostram o potencial de determinadas superfícies para induzir mineralização óssea in vitro, partir do uso de células mesenquimais progenitoras. Foram realizadas análises comparativas entre a topografia de implantes com e sem rugosidades nanométricas e o tipo de interação entre pré-osteoblastos semeados diretamente nesses implantes. Características distintas foram observadas em cada superfície.

Improvements in dental implants structure is the result of development of different types of geometrically intelligent surfaces, provided by the emergence of companies interested in innovation of these materials, however, there is still a need for studies to define the type of ideal surface. This work addresses an unprecedented discussion regarding implant surface evaluation methods, able to show the potential of certain areas to induce bone mineralization in vitro. From the use of mesenchymal progenitor cells, which have the capacity to respond to stimuli surface, comparative tests were performed between the topography implants with and without nano-roughness and the type of functional interaction between pre-osteoblasts seeded directly into these implants. Different characteristics of coating cells and mineralization niches on different surfaces were found.

Avaliação da estabilidade dos tecidos duros e moles em implantes imediatos com carga imediata em área estética: estudo clínico prospectivo longitudinal / Soft and hard tissue maintenance following placement of immediate-loaded implants in the aesthetic zone: a prospective longitudinal clinical trial

O objetivo desse trabalho foi avaliar, clínica e radiograficamente (bi/tridimensional), as alterações em tecidos moles e duros encontradas após a colocação de implantes imediatos com carga imediata em alvéolos pós-extração. Dez pacientes tratados com implantes imediatos com carga imediata nos incisivos central e lateral superiores foram incluídos. Parâmetros clínicos foram avaliados em fotografias padronizadas tiradas após a instalação do implante ( baseline ) e 1, 3 e 6 meses após. Parâmetros bi- e tridimensionais foram medidos em tomografias Cone-Beam, para avaliar a estabilidade do tecido ósseo na região vestibular. Também foram realizadas análises clínicas e fotográficas dos tecidos moles, para avaliar a sua estabilidade durante o período de avaliação. Não houve variações estatisticamente significativas nos parâmetros clínicos e radiográficos avaliados, tendo sido demonstrada uma manutenção de 94% do volume do osso vestibular. Implantes imediatos com carga imediata apresentam boa estabilidade dos tecidos moles e duros peri-implantares...

To evaluate by clinical and radiographic bi- and tridimensional means the soft and hard tissues alterations following immediate implant placement and loading in postextraction sockets in theanterior maxilla. Ten patients, treated with immediate-loaded implants in the maxillary central or lateral incisors, were evaluated in this study. Clinical parameters were evaluated in standardized pictures taken at baseline (immediately after), and 1, 3, and 6 months after provisional implant-supported single crown placement. Bi- and tridimensional radiographic parameters were evaluated from standardized digital periapical radiographies and from CBCT images. The volume of the buccal bone wall covering the central millimeter of the implant was also assessed in the CBCT images. The variation for all clinical, bi- and tridimensional parameters assessed was non-statistically significant. There was 94% maintenance of bone volume. The parameters assessed showed good clinical, bi- and tridimensional radiographic stability of soft and hard tissues for implants immediately placed and loaded in aesthetic zones...

Biomechanical evaluation of platform switching: different mismatch sizes, connection types, and implant protocols.

BACKGROUND: It is not yet well understood to what extent different implant-abutment mismatch sizes and implant-abutment connection types may influence the peri-implant biomechanical environment of implants in different clinical situations. METHODS: Computed tomography-based finite element models comprising a maxillary central incisor socket and 4.5 × 13 mm outer-diameter implants with external and internal hex connection types were constructed. The abutments were designed with diameters of 3.5 mm (platform switching [PS] with 1 mm of diametral mismatch [PS - 1]), 4.0 mm (PS with 0.5 mm of diametral mismatch [PS - 0.5]), and 4.5 mm (conventional matching implant-abutment design [CD]). Analysis of variance at the 95% confidence interval was used to evaluate peak equivalent strain (EQV strain) in the bone, bone volume affected by a strain >4,000 µÎµ (EQV strain >4,000 µÎµ), the peak von Mises stress (EQV stress) in abutment screw, and the bone-implant relative displacement. RESULTS: Similar bone strain levels (EQV strain and EQV strain >4,000 µÎµ) were encountered in PS - 1, PS - 0.5, and CD models for immediately placed implants, independent of the connection type. For immediately loaded implants, slightly smaller peak EQV strain and EQV strain >4,000 µÎµ were found for PS - 1. However, for both connection types in osseointegrated models, the higher the mismatch size, the lesser the amount of strain found. CONCLUSIONS: The increase in mismatch size of PS configuration results in a significant decrease of strain levels in bone for osseointegrated implants, principally for external hex connections. No significant effect of PS could be noted in immediately placed implants.

Intrusão de molares superiores utilizando microparafusos ortodônticos de titânio autoperfurantes / Maxillary molar instrusion using self-drilling titanium orthodontic microscrews

Os microsparafusos ortodônticos de titânio fornecem ancoragem esquelética para os tratamentos ortodônticos, viabilizando movimentações dentárias de forma mais controlada, minimizando os efeitos colaterias e tornando a mecânica ortodôntica independente da colaboração do paciente. Este novo dispositivo tem grande aplicabilidade clínica, com destaque para a intrusão de molares, devido à eficiência e simplicidade da mecânica, quando comparada à mecânica ortodôntica convencional. Este artigo tem como objetivo abordar pontos relevantes que norteiam o sucesso desta nova terapia de ancoragem esquelética na execução da mecânica de intrusão de molares superiores. Dentre os pontos discutidos na abordagem ortodôntica se destaca o planejamento do movimento a ser executado, a escolha, a seleção dos microparafusos e a ativação ortodôntica. Serão apresentados casos clínicos para exemplificar suas aplicações.

Evaluation of the relationship between interleukin-1 gene cluster polymorphisms and early implant failure in non-smoking patients.

OBJECTIVE: The aim of the present study was to investigate the relationship between specific polymorphisms of the interleukin-1 gene cluster and the early failure of osseointegrated implants. MATERIAL AND METHODS: The subject population was composed by a test group comprising 28 non-smoking patients (mean age 52.7) that had suffered one or more early implant failures and by a control group consisting of 34 individuals (mean age 43.3) with one or more healthy implants. Genomic DNA from buccal mucosa was amplified by the polymerase chain reaction (PCR), followed by restriction fragment length polymorphism (RFLP) and submitted to polyacrylamide gel electrophoresis to distinguish the alleles of the interleukin-1A (-889), interleukin-1B (+3953), interleukin-1B (-511) and interleukin-RN (intron 2) gene polymorphisms. Differences in the allele and genotype frequencies between control and test groups were assessed by chi(2) test or by Monte Carlo simulations (P<0.05). Haplotype frequencies, linkage disequilibrium and Hardy-Weinberg equilibrium were also estimated. RESULTS: No statistically significant differences were found in the genotype distribution or allelic frequencies of the polymorphisms. No differences were observed between control and test groups when different interleukin-1 gene cluster haplotypes were compared. Nevertheless, the interleukin-1A (-889) and interleukin-1B (+3953) polymorphic sites were in strong linkage disequilibrium (P=0.00014 for control group and P=0.0238 for the test group). CONCLUSION: This study suggests that polymorphisms in the interleukin-1 gene cluster are not associated with early implant failure in a non-smoking Brazilian population.