High-resolution CTCF footprinting reveals impact of chromatin state on cohesin extrusion dynamics.

DNA looping is vital for establishing many enhancer-promoter interactions. While CTCF is known to anchor many cohesin-mediated loops, the looped chromatin fiber appears to predominantly exist in a poorly characterized actively extruding state. To better characterize extruding chromatin loop structures, we used CTCF MNase HiChIP data to determine both CTCF binding at high resolution and 3D contact information. Here we present FactorFinder, a tool that identifies CTCF binding sites at near base-pair resolution. We leverage this substantial advance in resolution to determine that the fully extruded (CTCF-CTCF) state is rare genome-wide with locus-specific variation from ~1-10%. We further investigate the impact of chromatin state on loop extrusion dynamics, and find that active enhancers and RNA Pol II impede cohesin extrusion, facilitating an enrichment of enhancer-promoter contacts in the partially extruded loop state. We propose a model of topological regulation whereby the transient, partially extruded states play active roles in transcription.

Targeting SWI/SNF ATPases in enhancer-addicted prostate cancer.

The switch/sucrose non-fermentable (SWI/SNF) complex has a crucial role in chromatin remodelling1 and is altered in over 20% of cancers2,3. Here we developed a proteolysis-targeting chimera (PROTAC) degrader of the SWI/SNF ATPase subunits, SMARCA2 and SMARCA4, called AU-15330. Androgen receptor (AR)+ forkhead box A1 (FOXA1)+ prostate cancer cells are exquisitely sensitive to dual SMARCA2 and SMARCA4 degradation relative to normal and other cancer cell lines. SWI/SNF ATPase degradation rapidly compacts cis-regulatory elements bound by transcription factors that drive prostate cancer cell proliferation, namely AR, FOXA1, ERG and MYC, which dislodges them from chromatin, disables their core enhancer circuitry, and abolishes the downstream oncogenic gene programs. SWI/SNF ATPase degradation also disrupts super-enhancer and promoter looping interactions that wire supra-physiologic expression of the AR, FOXA1 and MYC oncogenes themselves. AU-15330 induces potent inhibition of tumour growth in xenograft models of prostate cancer and synergizes with the AR antagonist enzalutamide, even inducing disease remission in castration-resistant prostate cancer (CRPC) models without toxicity. Thus, impeding SWI/SNF-mediated enhancer accessibility represents a promising therapeutic approach for enhancer-addicted cancers.

Use of the DICE (Dual Integrase Cassette Exchange) System.

When constructing transgenic cell lines via plasmid DNA integration, precise targeting to a desired genomic location is advantageous. It is also often advantageous to remove the bacterial backbone, since bacterial elements can lead to the epigenetic silencing of neighboring DNA. The least cumbersome method to remove the plasmid backbone is recombinase-mediated cassette exchange (RMCE). RMCE is accomplished by arranging recombinase sites in the genome and in a donor plasmid such that a recombinase can both integrate the donor plasmid and excise its bacterial backbone. When a single recombinase is used for RMCE, recombination between undesired pairings of the sites can lead to a significant number of unwanted cell lines. To reduce the frequency with which these side products occur, several variants of RMCE that increase desired outcomes have been developed. Nevertheless, an important feature lacking from these improved RMCE methods is that none have fully utilized the recombinases that have been demonstrated to be the most robust and stringent at performing genomic integration in plants and animals, i.e., the phiC31 and Bxb1 phage integrases. To address this need, we have developed an RMCE protocol using these two serine integrases that we call dual integrase cassette exchange (DICE). Our DICE system provides a means to achieve high-precision DNA integration at a desired location and is especially well suited for repeated recombination into the same locus. In this chapter, we provide our most current protocols for using DICE in feeder-free human-induced pluripotent stem cells .

Genomic integration of the full-length dystrophin coding sequence in Duchenne muscular dystrophy induced pluripotent stem cells.

The plasmid vectors that express the full-length human dystrophin coding sequence in human cells was developed. Dystrophin, the protein mutated in Duchenne muscular dystrophy, is extraordinarily large, providing challenges for cloning and plasmid production in Escherichia coli. The authors expressed dystrophin from the strong, widely expressed CAG promoter, along with co-transcribed luciferase and mCherry marker genes useful for tracking plasmid expression. Introns were added at the 3' and 5' ends of the dystrophin sequence to prevent translation in E. coli, resulting in improved plasmid yield. Stability and yield were further improved by employing a lower-copy number plasmid origin of replication. The dystrophin plasmids also carried an attB site recognized by phage phiC31 integrase, enabling the plasmids to be integrated into the human genome at preferred locations by phiC31 integrase. The authors demonstrated single-copy integration of plasmid DNA into the genome and production of human dystrophin in the human 293 cell line, as well as in induced pluripotent stem cells derived from a patient with Duchenne muscular dystrophy. Plasmid-mediated dystrophin expression was also demonstrated in mouse muscle. The dystrophin expression plasmids described here will be useful in cell and gene therapy studies aimed at ameliorating Duchenne muscular dystrophy.

Effects on the transcriptome upon deletion of a distal element cannot be predicted by the size of the H3K27Ac peak in human cells.

Genome-wide association studies (GWAS) have identified single nucleotide polymorphisms (SNPs) associated with increased risk for colorectal cancer (CRC). A molecular understanding of the functional consequences of this genetic variation is complicated because most GWAS SNPs are located in non-coding regions. We used epigenomic information to identify H3K27Ac peaks in HCT116 colon cancer cells that harbor SNPs associated with an increased risk for CRC. Employing CRISPR/Cas9 nucleases, we deleted a CRC risk-associated H3K27Ac peak from HCT116 cells and observed large-scale changes in gene expression, resulting in decreased expression of many nearby genes. As a comparison, we showed that deletion of a robust H3K27Ac peak not associated with CRC had minimal effects on the transcriptome. Interestingly, although there is no H3K27Ac peak in HEK293 cells in the E7 region, deletion of this region in HEK293 cells decreased expression of several of the same genes that were downregulated in HCT116 cells, including the MYC oncogene. Accordingly, deletion of E7 causes changes in cell culture assays in HCT116 and HEK293 cells. In summary, we show that effects on the transcriptome upon deletion of a distal regulatory element cannot be predicted by the size or presence of an H3K27Ac peak.

A genome-wide analysis of Cas9 binding specificity using ChIP-seq and targeted sequence capture.

Clustered regularly interspaced short palindromic repeat (CRISPR) RNA-guided nucleases have gathered considerable excitement as a tool for genome engineering. However, questions remain about the specificity of target site recognition. Cleavage specificity is typically evaluated by low throughput assays (T7 endonuclease I assay, target amplification followed by high-throughput sequencing), which are limited to a subset of potential off-target sites. Here, we used ChIP-seq to examine genome-wide CRISPR binding specificity at gRNA-specific and gRNA-independent sites for two guide RNAs. RNA-guided Cas9 binding was highly specific to the target site while off-target binding occurred at much lower intensities. Cas9-bound regions were highly enriched in NGG sites, a sequence required for target site recognition by Streptococcus pyogenes Cas9. To determine the relationship between Cas9 binding and endonuclease activity, we applied targeted sequence capture, which allowed us to survey 1200 genomic loci simultaneously including potential off-target sites identified by ChIP-seq and by computational prediction. A high frequency of indels was observed at both target sites and one off-target site, while no cleavage activity could be detected at other ChIP-bound regions. Our results confirm the high-specificity of CRISPR endonucleases and demonstrate that sequence capture can be used as a high-throughput genome-wide approach to identify off-target activity.

Transcription activator like effector (TALE)-directed piggyBac transposition in human cells.

Insertional therapies have shown great potential for combating genetic disease and safer methods would undoubtedly broaden the variety of possible illness that can be treated. A major challenge that remains is reducing the risk of insertional mutagenesis due to random insertion by both viral and non-viral vectors. Targetable nucleases are capable of inducing double-stranded breaks to enhance homologous recombination for the introduction of transgenes at specific sequences. However, off-target DNA cleavages at unknown sites can lead to mutations that are difficult to detect. Alternatively, the piggyBac transposase is able perform all of the steps required for integration; therefore, cells confirmed to contain a single copy of a targeted transposon, for which its location is known, are likely to be devoid of aberrant genomic modifications. We aimed to retarget transposon insertions by comparing a series of novel hyperactive piggyBac constructs tethered to a custom transcription activator like effector DNA-binding domain designed to bind the first intron of the human CCR5 gene. Multiple targeting strategies were evaluated using combinations of both plasmid-DNA and transposase-protein relocalization to the target sequence. We demonstrated user-defined directed transposition to the CCR5 genomic safe harbor and isolated single-copy clones harboring targeted integrations.

Quantitative analysis of TALE-DNA interactions suggests polarity effects.

Transcription activator-like effectors (TALEs) have revolutionized the field of genome engineering. We present here a systematic assessment of TALE DNA recognition, using quantitative electrophoretic mobility shift assays and reporter gene activation assays. Within TALE proteins, tandem 34-amino acid repeats recognize one base pair each and direct sequence-specific DNA binding through repeat variable di-residues (RVDs). We found that RVD choice can affect affinity by four orders of magnitude, with the relative RVD contribution in the order NG > HD ≈ NN >> NI > NK. The NN repeat preferred the base G over A, whereas the NK repeat bound G with 10(3)-fold lower affinity. We compared AvrBs3, a naturally occurring TALE that recognizes its target using some atypical RVD-base combinations, with a designed TALE that precisely matches 'standard' RVDs with the target bases. This comparison revealed unexpected differences in sensitivity to substitutions of the invariant 5'-T. Another surprising observation was that base mismatches at the 5' end of the target site had more disruptive effects on affinity than those at the 3' end, particularly in designed TALEs. These results provide evidence that TALE-DNA recognition exhibits a hitherto un-described polarity effect, in which the N-terminal repeats contribute more to affinity than C-terminal ones.

Highly active zinc-finger nucleases by extended modular assembly.

Zinc-finger nucleases (ZFNs) are important tools for genome engineering. Despite intense interest by many academic groups, the lack of robust noncommercial methods has hindered their widespread use. The modular assembly (MA) of ZFNs from publicly available one-finger archives provides a rapid method to create proteins that can recognize a very broad spectrum of DNA sequences. However, three- and four-finger arrays often fail to produce active nucleases. Efforts to improve the specificity of the one-finger archives have not increased the success rate above 25%, suggesting that the MA method might be inherently inefficient due to its insensitivity to context-dependent effects. Here we present the first systematic study on the effect of array length on ZFN activity. ZFNs composed of six-finger MA arrays produced mutations at 15 of 21 (71%) targeted loci in human and mouse cells. A novel drop-out linker scheme was used to rapidly assess three- to six-finger combinations, demonstrating that shorter arrays could improve activity in some cases. Analysis of 268 array variants revealed that half of MA ZFNs of any array composition that exceed an ab initio B-score cutoff of 15 were active. These results suggest that, when used appropriately, MA ZFNs are able to target more DNA sequences with higher success rates than other current methods.

The generation of zinc finger proteins by modular assembly.

The modular assembly (MA) method of generating engineered zinc finger proteins (ZFPs) was the first practical method for creating custom DNA-binding proteins. As such, MA has enabled a vast exploration of sequence-specific methods and reagents, ushering in the modern era of zinc finger-based applications that are described in this volume. The first zinc finger nuclease to cleave an endogenous site was created using MA, as was the first artificial transcription factor to enter phase II clinical trials. In recent years, other excellent methods have been developed that improved the affinity and specificity of the engineered ZFPs. However, MA is still used widely for many applications. This chapter will describe methods and give guidance for the creation of ZFPs using MA. Such ZFPs might be useful as starting materials to perform other methods described in this volume. Here, we also describe a single-strand annealing recombination assay for the initial testing of zinc finger nucleases.

Restricted spacer tolerance of a zinc finger nuclease with a six amino acid linker.

Zinc finger nucleases can be engineered to create highly efficient and precise changes to the genetic information within living cells. We report the investigation of an important parameter that defines the type of target site the nuclease can cleave. The active nuclease is a dimer, requiring that the DNA target site contain two zinc finger binding sites separated by a short spacer. Using a plasmid-based recombination assay in HEK 293T cells, we show that a 6 amino acid linker between the zinc finger DNA-binding domain and the FokI cleavage domain restricts nuclease activity to sites containing a 6 bp spacer. These observations concur with other recent studies, suggesting this information will be useful in the design of new potent and accurate zinc finger nucleases.

Structure of Aart, a designed six-finger zinc finger peptide, bound to DNA.

Cys2-His2 zinc fingers are one of the most common types of DNA-binding domains. Modifications to zinc-finger binding specificity have recently enabled custom DNA-binding proteins to be designed to a wide array of target sequences. We present here a 1.96 A structure of Aart, a designed six-zinc finger protein, bound to a consensus DNA target site. This is the first structure of a designed protein with six fingers, and was intended to provide insights into the unusual affinity and specificity characteristics of this protein. Most protein-DNA contacts were found to be consistent with expectations, while others were unanticipated or insufficient to explain specificity. Several were unexpectedly mediated by glycerol, water molecules or amino acid-base stacking interactions. These results challenge some conventional concepts of recognition, particularly the finding that triplets containing 5'A, C, or T are typically not specified by direct interaction with the amino acid in position 6 of the recognition helix.