Optimal scheduling in demand-side management based grid-connected microgrid system by hybrid optimization approach considering diverse wind profiles.

Demand side management (DSM) is one of the trending economic strategies which shifts the elastic demand to the off-peak hours from the peak hours so as to reduce the overall generation cost of the system. The work done in this paper can be categorized in three phases. In the first phase, various wind speed to power conversion mathematical models available in literature are analysed to find out the one with maximum level of wind penetration. For second phase, an economic DSM strategy is implemented to restructure the forecasted load demand model for various participation levels. In the final phase the cost-effective optimization of two microgrid distribution systems are percolated. As an optimization tool, novel hybrid CSAJAYA has been used to carry on the study. Different types of grid participating and pricing strategies along with valve point loading effect and wind energy uncertainty are considered to amplify the complexity and practicality of the study. The generation costs reduced from 3 to 5% when the forecasted demand was reformed with 20% DSM participation for both the test systems. A detailed comparison with the results from various optimization tools studied confirms the effectiveness of the proposed hybrid approach. The hybrid optimization tool presented in this paper performs better in terms of central tendencies, nonparametric statistical analysis, and algorithm execution time.

Amended GWO approach based multi-machine power system stability enhancement.

The conception of electromechanical oscillations initiates in the power network when there is an installation of the generator in parallel with the existent one. Further, the interconnection of multiple areas, extension in transmission, capricious load characteristics, etc. causes low-frequency oscillations in the consolidated power network. This paper proposes variants of a booming population-based grey wolf optimization (GWO) algorithm in the tuning of power system stabilizer parameters of a multi-machine system in damping low-frequency oscillations. The parameters have been tuned by framing an objective function considering the improving damping ratios for the system states with lesser damping ratios and shifting the system eigenvalues towards the left-hand side of s-plane for the improved settling characteristics for the oscillations in the system. The requisites of stabilizer strategy are mapped with the hallmarks of prevalent algorithms and designed hybrid versions of GWO for the enhancement of the multi-machine power system stability. Four variants of GWO technique are nominated based on the competent stabilizer performance namely, modified grey wolf optimization (MGWO), hybrid MGWO particle swarm optimization (MGWOPSO), hybrid MGWO sine cosine algorithm (MGWOSCA) and hybrid MGWO crow search algorithm (MGWOCSA) for the designed multi-machine power network. The proposed methods have been realized with the statistical analysis on the 23 benchmark functions. Nonparametric statistical tests, namely, Feidman test, Anova test and Quade tests, have been performed on the test system, further analysed in detail. A detailed comparative analysis under the self-clearing fault is presented to illustrate the suitability of the proposed techniques. For the analysis purpose, the location of system eigenvalues has been observed along with their oscillating frequencies and corresponding damping ratios. Further, the damping nature offered with considered system uncertainty for the system states also presented with the PSS parameters obtained by the proposed algorithms.

Accessing topological surface states and negative MR in sculpted nanowires of Bi2Te3 at ultra-low temperature.

Milling of 2D flakes is a simple method to fabricate nanomaterial of any desired shape and size. Inherently milling process can introduce the impurity or disorder which might show exotic quantum transport phenomenon when studied at the low temperature. Here we report temperature dependent weak antilocalization (WAL) effects in the sculpted nanowires of topological insulator in the presence of perpendicular magnetic field. The quadratic and linear magnetoconductivity (MC) curves at low temperature (>2 K) indicate the bulk contribution in the transport. A cusp feature in magnetoconductivity curves (positive magnetoresistance) at ultra low (<1 K) temperature and at magnetic field (<1 T) represent the WAL indicating the transport through surface states. The MC curves are discussed by using the 2D Hikami-Larkin-Nagaoka theory. The cross-over/interplay nature of positive and negative magnetoresistance observed in the MR curve at ultra-low temperature. Our results indicate that transport through topological surface states (TSS) in sculpted nanowires of Bi2Te3 can be achieved at mK range and linear MR observed at ∼2 K could be the coexistence of electron transport through TSS and contribution from the bulk band.

Spin-dependent scattering induced negative magnetoresistance in topological insulator Bi2Te3 nanowires.

Studies of negative magnetoresistance in novel materials have recently been in the forefront of spintronic research. Here, we report an experimental observation of the temperature dependent negative magnetoresistance in Bi2Te3 topological insulator (TI) nanowires at ultralow temperatures (20 mK). We find a crossover from negative to positive magnetoresistance while increasing temperature under longitudinal magnetic field. We observe a large negative magnetoresistance which reaches -22% at 8 T. The interplay between negative and positive magnetoresistance can be understood in terms of the competition between dephasing and spin-orbit scattering time scales. Based on the first-principles calculations within a density functional theory framework, we demonstrate that disorder (substitutional) by Ga+ ion milling process, which is used to fabricate nanowires, induces local magnetic moments in Bi2Te3 crystal that can lead to spin-dependent scattering of surface and bulk electrons. These experimental findings show a significant advance in the nanoscale spintronics applications based on longitudinal magnetoresistance in TIs. Our experimental results of large negative longitudinal magnetoresistance in 3D TIs further indicate that axial anomaly is a universal phenomenon in generic 3D metals.

Proximity-induced supercurrent through topological insulator based nanowires for quantum computation studies.

Proximity-induced superconducting energy gap in the surface states of topological insulators has been predicted to host the much wanted Majorana fermions for fault-tolerant quantum computation. Recent theoretically proposed architectures for topological quantum computation via Majoranas are based on large networks of Kitaev's one-dimensional quantum wires, which pose a huge experimental challenge in terms of scalability of the current single nanowire based devices. Here, we address this problem by realizing robust superconductivity in junctions of fabricated topological insulator (Bi2Se3) nanowires proximity-coupled to conventional s-wave superconducting (W) electrodes. Milling technique possesses great potential in fabrication of any desired shapes and structures at nanoscale level, and therefore can be effectively utilized to scale-up the existing single nanowire based design into nanowire based network architectures. We demonstrate the dominant role of ballistic topological surface states in propagating the long-range proximity induced superconducting order with high IcRN product in long Bi2Se3 junctions. Large upper critical magnetic fields exceeding the Chandrasekhar-Clogston limit suggests the existence of robust superconducting order with spin-triplet cooper pairing. An unconventional inverse dependence of IcRN product on the width of the nanowire junction was also observed.

Surface-Engineered Nanostructure-Based Efficient Nonpolar GaN Ultraviolet Photodetectors.

Surface-engineered nanostructured nonpolar (112̅0) gallium nitride (GaN)-based high-performance ultraviolet (UV) photodetectors (PDs) have been fabricated. The surface morphology of a nonpolar GaN film was modified from pyramidal shape to flat and trigonal nanorods displaying facets along different crystallographic planes. We report the ease of enhancing the photocurrent (5.5-fold) and responsivity (6-fold) of the PDs using a simple and convenient wet chemical-etching-induced surface engineering. The fabricated metal-semiconductor-metal structure-based surface-engineered UV PD exhibited a significant increment in detectivity, that is, from 0.43 to 2.83 (×108) Jones, and showed a very low noise-equivalent power (∼10-10 W Hz-1/2). The reliability of the nanostructured PD was ensured via fast switching with a response and decay time of 332 and 995 ms, which were more than five times faster with respect to the unetched pyramidal structure-based UV PD. The improvement in device performance was attributed to increased light absorption, efficient transport of photogenerated carriers, and enhancement in conduction cross section via elimination of recombination/trap centers related to defect states. Thus, the proposed method could be a promising approach to enhance the performance of GaN-based PD technology.

Evidence of robust 2D transport and Efros-Shklovskii variable range hopping in disordered topological insulator (Bi2Se3) nanowires.

We report the experimental observation of variable range hopping conduction in focused-ion-beam (FIB) fabricated ultra-narrow nanowires of topological insulator (Bi2Se3). The value of the exponent (d + 1)-1 in the hopping equation was extracted as [Formula: see text]for different widths of nanowires, which is the proof of the presence of Efros-Shklovskii hopping transport mechanism in a strongly disordered system. High localization lengths (0.5 nm, 20 nm) were calculated for the devices. A careful analysis of the temperature dependent fluctuations present in the magnetoresistance curves, using the standard Universal Conductance Fluctuation theory, indicates the presence of 2D topological surface states. Also, the surface state contribution to the conductance was found very close to one conductance quantum. We believe that our experimental findings shed light on the understanding of quantum transport in disordered topological insulator based nanostructures.

Observation of quantum oscillations in FIB fabricated nanowires of topological insulator (Bi2Se3).

In the last few years, research based on topological insulators (TIs) has been of great interest due to their intrinsic exotic fundamental properties and potential applications such as quantum computers or spintronics. The fabrication of TI nanodevices and the study of their transport properties has mostly focused on high quality crystalline nanowires or nanoribbons. Here, we report a robust approach to Bi2Se3 nanowire formation from deposited flakes using an ion beam milling method. Fabricated Bi2Se3 nanowire devices were employed to investigate the robustness of the topological surface state (TSS) to gallium ion doping and any deformation in the material due to the fabrication tools. We report on the quantum oscillations in magnetoresistance (MR) curves under the parallel magnetic field. The resistance versus magnetic field curves are studied and compared with Aharonov-Bohm (AB) interference effects, which further demonstrate transport through the TSS. The fabrication route and observed electronic transport properties indicate clear quantum oscillations, and these can be exploited further in studying the exotic electronic properties associated with TI-based nanodevices.

FIB synthesis of Bi2Se3 1D nanowires demonstrating the co-existence of Shubnikov-de Haas oscillations and linear magnetoresistance.

Since the discovery of topological insulators (TIs), there are considerable interests in demonstrating metallic surface states (SS), their shielded robust nature to the backscattering and study their properties at nanoscale dimensions by fabricating nanodevices. Here we address an important scientific issue related to TI whether one can clearly demonstrate the robustness of topological surface states (TSS) to the presence of disorder that does not break any fundamental symmetry. The simple straightforward method of FIB milling was used to synthesize nanowires of Bi2Se3 which we believe is an interesting route to test robustness of TSS and the obtained results are new compared to many of the earlier papers on quantum transport in TI demonstrating the robustness of metallic SS to gallium (Ga) doping. In the presence of perpendicular magnetic field, we have observed the co-existence of Shubnikov-de Haas oscillations and linear magnetoresistance (LMR), which was systematically investigated for different channel lengths, indicating the Dirac dispersive surface states. The transport properties and estimated physical parameters shown here demonstrate the robustness of SS to the fabrication tools triggering flexibility to explore new exotic quantum phenomena at nanodevice level.

Hot electron induced NIR detection in CdS films.

We report the use of random Au nanoislands to enhance the absorption of CdS photodetectors at wavelengths beyond its intrinsic absorption properties from visible to NIR spectrum enabling a high performance visible-NIR photodetector. The temperature dependent annealing method was employed to form random sized Au nanoparticles on CdS films. The hot electron induced NIR photo-detection shows high responsivity of ~780 mA/W for an area of ~57 µm(2). The simulated optical response (absorption and responsivity) of Au nanoislands integrated in CdS films confirms the strong dependence of NIR sensitivity on the size and shape of Au nanoislands. The demonstration of plasmon enhanced IR sensitivity along with the cost-effective device fabrication method using CdS film enables the possibility of economical light harvesting applications which can be implemented in future technological applications.

High performance broadband photodetector using fabricated nanowires of bismuth selenide.

Recently, very exciting optoelectronic properties of Topological insulators (TIs) such as strong light absorption, photocurrent sensitivity to the polarization of light, layer thickness and size dependent band gap tuning have been demonstrated experimentally. Strong interaction of light with TIs has been shown theoretically along with a proposal for a TIs based broad spectral photodetector having potential to perform at the same level as that of a graphene based photodetector. Here we demonstrate that focused ion beam (FIB) fabricated nanowires of TIs could be used as ultrasensitive visible-NIR nanowire photodetector based on TIs. We have observed efficient electron hole pair generation in the studied Bi2Se3 nanowire under the illumination of visible (532 nm) and IR light (1064 nm). The observed photo-responsivity of ~300 A/W is four orders of magnitude larger than the earlier reported results on this material. Even though the role of 2D surface states responsible for high reponsivity is unclear, the novel and simple micromechanical cleavage (exfoliation) technique for the deposition of Bi2Se3 flakes followed by nanowire fabrication using FIB milling enables the construction and designing of ultrasensitive broad spectral TIs based nanowire photodetector which can be exploited further as a promising material for optoelectronic devices.