RESUMO
Myosin II is the muscle molecular motor that works in two bipolar arrays in each thick filament of the striated (skeletal and cardiac) muscle, converting the chemical energy into steady force and shortening by cyclic ATP-driven interactions with the nearby actin filaments. Different isoforms of the myosin motor in the skeletal muscles account for the different functional requirements of the slow muscles (primarily responsible for the posture) and fast muscles (responsible for voluntary movements). To clarify the molecular basis of the differences, here the isoform-dependent mechanokinetic parameters underpinning the force of slow and fast muscles are defined with a unidimensional synthetic nanomachine powered by pure myosin isoforms from either slow or fast rabbit skeletal muscle. Data fitting with a stochastic model provides a self-consistent estimate of all the mechanokinetic properties of the motor ensemble including the motor force, the fraction of actin-attached motors and the rate of transition through the attachment-detachment cycle. The achievements in this paper set the stage for any future study on the emergent mechanokinetic properties of an ensemble of myosin molecules either engineered or purified from mutant animal models or human biopsies.
Assuntos
Contração Muscular , Sarcômeros , Animais , Humanos , Coelhos , Contração Muscular/fisiologia , Miosinas , Músculo Esquelético/fisiologia , Isoformas de Proteínas/químicaRESUMO
The medaka fish (Oryzias latipes) is a vertebrate model used in developmental biology and genetics. Here we explore its suitability as a model for investigating the molecular mechanisms of human myopathies caused by mutations in sarcomeric proteins. To this end, the relevant mechanical parameters of the intact skeletal muscle of wild-type medaka are determined using the transparent tail at larval stage 40. Tails were mounted at sarcomere length of 2.1 µm in a thermoregulated trough containing physiological solution. Tetanic contractions were elicited at physiological temperature (10°C-30°C) by electrical stimulation, and sarcomere length changes were recorded with nanometer-microsecond resolution during both isometric and isotonic contractions with a striation follower. The force output has been normalized for the actual fraction of the cross section of the tail occupied by the myofilament lattice, as established with transmission electron microscopy (TEM), and then for the actual density of myofilaments, as established with X-ray diffraction. Under these conditions, the mechanical performance of the contracting muscle of the wild-type larva can be defined at the level of the half-thick filament, where â¼300 myosin motors work in parallel as a collective motor, allowing a detailed comparison with the established performance of the skeletal muscle of different vertebrates. The results of this study point out that the medaka fish larva is a suitable model for the investigation of the genotype/phenotype correlations and therapeutic possibilities in skeletal muscle diseases caused by mutations in sarcomeric proteins.NEW & NOTEWORTHY The suitability of the medaka fish as a model for investigating the molecular mechanisms of human myopathies caused by mutations of sarcomeric proteins is tested by combining structural analysis and sarcomere-level mechanics of the skeletal muscle of the tail of medaka larva. The mechanical performance of the medaka muscle, scaled at the level of the myosin-containing thick filament, together with its reduced genome duplication makes this model unique for investigations of the genotype/phenotype correlations in human myopathies.
Assuntos
Doenças Musculares , Oryzias , Animais , Humanos , Sarcômeros/metabolismo , Oryzias/metabolismo , Larva/metabolismo , Músculo Esquelético/metabolismo , Miosinas/metabolismo , Contração Muscular/fisiologiaRESUMO
The mechanical performances of the vertebrate skeletal muscle during isometric and isotonic contractions are interfaced with the corresponding energy consumptions to define the coupling between mechanical and biochemical steps in the myosin-actin energy transduction cycle. The analysis is extended to a simplified synthetic nanomachine in which eight HMM molecules purified from fast mammalian skeletal muscle are brought to interact with an actin filament in the presence of 2 mM ATP, to assess the emergent properties of a minimum number of motors working in ensemble without the effects of both the higher hierarchical levels of striated muscle organization and other sarcomeric, regulatory and cytoskeleton proteins. A three-state model of myosin-actin interaction is able to predict the known relationships between energetics and transient and steady-state mechanical properties of fast skeletal muscle either in vivo or in vitro only under the assumption that during shortening a myosin motor can interact with two actin sites during one ATP hydrolysis cycle. Implementation of the molecular details of the model should be achieved by exploiting kinetic and structural constraints present in the transients elicited by stepwise perturbations in length or force superimposed on the isometric contraction.
RESUMO
Titin is a molecular spring in parallel with myosin motors in each muscle half-sarcomere, responsible for passive force development at sarcomere length (SL) above the physiological range (>2.7 µm). The role of titin at physiological SL is unclear and is investigated here in single intact muscle cells of the frog (Rana esculenta), by combining half-sarcomere mechanics and synchrotron X-ray diffraction in the presence of 20 µM para-nitro-blebbistatin, which abolishes the activity of myosin motors and maintains them in the resting state even during activation of the cell by electrical stimulation. We show that, during cell activation at physiological SL, titin in the I-band switches from an SL-dependent extensible spring (OFF-state) to an SL-independent rectifier (ON-state) that allows free shortening while resisting stretch with an effective stiffness of ~3 pN nm-1 per half-thick filament. In this way, I-band titin efficiently transmits any load increase to the myosin filament in the A-band. Small-angle X-ray diffraction signals reveal that, with I-band titin ON, the periodic interactions of A-band titin with myosin motors alter their resting disposition in a load-dependent manner, biasing the azimuthal orientation of the motors toward actin. This work sets the stage for future investigations on scaffold and mechanosensing-based signaling functions of titin in health and disease.
Assuntos
Citoesqueleto de Actina , Músculo Esquelético , Conectina , Músculo Esquelético/fisiologia , Sarcômeros/fisiologia , Miosinas/fisiologia , Contração MuscularRESUMO
Contraction of striated muscle is regulated by a dual mechanism involving both thin, actin-containing filament and thick, myosin-containing filament. Thin filament is activated by Ca2+ binding to troponin, leading to tropomyosin displacement that exposes actin sites for interaction with myosin motors, extending from the neighbouring stress-activated thick filaments. Motor attachment to actin contributes to spreading activation along the thin filament, through a cooperative mechanism, still unclear, that determines the slope of the sigmoidal relation between isometric force and pCa (-log[Ca2+]), estimated by Hill coefficient nH. We use sarcomere-level mechanics in demembranated fibres of rabbit skeletal muscle activated by Ca2+ at different temperatures (12-35 °C) to show that nH depends on the motor force at constant number of attached motors. The definition of the role of motor force provides fundamental constraints for modelling the dynamics of thin filament activation and defining the action of small molecules as possible therapeutic tools.
Assuntos
Actinas , Sarcômeros , Animais , Coelhos , Sarcômeros/metabolismo , Actinas/metabolismo , Contração Muscular/fisiologia , Cálcio/metabolismo , Miosinas/metabolismo , Músculo Esquelético/metabolismoRESUMO
KEY POINTS: A nanomachine made of an ensemble of seven heavy-meromyosin (HMM) fragments of muscle myosin interacting with an actin filament is able to mimic the half-sarcomere generating steady force and constant-velocity shortening. To preserve Ca2+ as a free parameter, the Ca2+ -insensitive gelsolin fragment TL40 is used to attach the correctly oriented actin filament to the laser-trapped bead acting as a force transducer. The new method reveals that the performance of the nanomachine powered by myosin from frog hind-limb muscles depends on [Ca2+ ], an effect mediated by a Ca2+ -binding site in the regulatory light chain of HMM. The Ca2+ -sensitivity is class-specific because the performance of the nanomachine powered by mammalian skeletal muscle myosin is Ca2+ independent. A model simulation is able to interface the nanomachine performance with that of the muscle of origin and provides a molecular explanation of the functional diversity of muscles with different orthologue isoforms of myosin. ABSTRACT: An ensemble of seven heavy-meromyosin (HMM) fragments of myosin-II purified from the hindlimb muscles of the frog (Rana esculenta) is used to drive a synthetic nanomachine that pulls an actin filament in the absence of confounding effects of other sarcomeric proteins. In the present version of the nanomachine the +end of the actin filament is attached to the laser trapped bead via the Ca2+ -insensitive gelsolin fragment TL40, making [Ca2+ ] a free parameter. Frog myosin performance in 2 mm ATP is affected by Ca2+ : in 0.1 mm Ca2+ , the isometric steady force (F0 , 15.25 pN) is increased by 50% (P = 0.004) with respect to that in Ca2+ -free solution, the maximum shortening velocity (V0 , 4.6 µm s-1 ) is reduced by 27% (P = 0.46) and the maximum power (Pmax , 7.6 aW) is increased by 21% (P = 0.17). V0 reduction is not significant for the paucity of data at low force, although it is solidified by a similar decrease (33%, P < 0.0001) in the velocity of actin sliding as indicated by an in vitro motility assay (Vf ). The rate of ATP-hydrolysis in solution (φ) exhibits a similar calcium dependence. Ca2+ titration curves for Vf and φ give Kd values of â¼30 µm. All the above mechanical and kinetic parameters are independent of Ca2+ when HMM from rabbit psoas myosin is used, indicating that the Ca2+ -sensitivity is a class-specific property of muscle myosin. A unique multiscale model allows interfacing of the nanomachine performance to that of the muscle of origin and identifies the kinetic steps responsible for the Ca2+ -sensitivity of frog myosin.
Assuntos
Contração Muscular , Miosinas , Actinas , Animais , Músculo Esquelético , Miosina Tipo II , Isoformas de Proteínas , CoelhosRESUMO
The emergent properties of the array arrangement of the molecular motor myosin II in the sarcomere of the striated muscle, the generation of steady force and shortening, can be studied in vitro with a synthetic nanomachine made of an ensemble of eight heavy-meromyosin (HMM) fragments of myosin from rabbit psoas muscle, carried on a piezoelectric nanopositioner and brought to interact with a properly oriented actin filament attached via gelsolin (a Ca2+-regulated actin binding protein) to a bead trapped by dual laser optical tweezers. However, the application of the original version of the nanomachine to investigate the Ca2+-dependent regulation mechanisms of the other sarcomeric (regulatory or cytoskeleton) proteins, adding them one at a time, was prevented by the impossibility to preserve [Ca2+] as a free parameter. Here, the nanomachine is implemented by assembling the bead-attached actin filament with the Ca2+-insensitive gelsolin fragment TL40. The performance of the nanomachine is determined both in the absence and in the presence of Ca2+ (0.1 mM, the concentration required for actin attachment to the bead with gelsolin). The nanomachine exhibits a maximum power output of 5.4 aW, independently of [Ca2+], opening the possibility for future studies of the Ca2+-dependent function/dysfunction of regulatory and cytoskeletal proteins.
Assuntos
Cálcio/metabolismo , Contração Muscular , Miosina Tipo II/metabolismo , Nanoestruturas/química , Citoesqueleto de Actina/metabolismo , Citoesqueleto de Actina/fisiologia , Animais , Gelsolina/metabolismo , Gelsolina/fisiologia , Masculino , Músculo Esquelético/metabolismo , Músculo Esquelético/fisiologia , Miosina Tipo II/fisiologia , CoelhosRESUMO
KEY POINTS: Fast sarcomere-level mechanics in contracting intact fibres from frog skeletal muscle reveal an I-band spring with an undamped stiffness 100 times larger than the known static stiffness. This undamped stiffness remains constant in the range of sarcomere length 2.7-3.1 µm, showing the ability of the I-band spring to adapt its length to the width of the I-band. The stiffness and tunability of the I-band spring implicate titin as a force contributor that, during contraction, allows weaker half-sarcomeres to equilibrate with in-series stronger half-sarcomeres, preventing the development of sarcomere length inhomogeneity. This work opens new possibilities for the detailed in situ description of the structural-functional basis of muscle dysfunctions related to mutations or site-directed mutagenesis in titin that alter the I-band stiffness. ABSTRACT: Force and shortening in the muscle sarcomere are due to myosin motors from thick filaments pulling nearby actin filaments toward the sarcomere centre. Thousands of serially linked sarcomeres in muscle make the shortening (and the shortening speed) macroscopic, while the intrinsic instability of in-series force generators is likely prevented by the cytoskeletal protein titin that connects the thick filament with the sarcomere end, working as an I-band spring that accounts for the rise of passive force with sarcomere length (SL). However, current estimates of titin stiffness, deduced from the passive force-SL relation and single molecule mechanics, are much smaller than what is required to avoid the development of large inhomogeneities among sarcomeres. In this work, using 4 kHz stiffness measurements on a population of sarcomeres selected along an intact fibre isolated from frog skeletal muscle contracting at different SLs (temperature 4°C), we measure the undamped stiffness of an I-band spring that at SL > 2.7 µm attains a maximum constant value of â¼6 pN nm-1 per half-thick filament, two orders of magnitude larger than expected from titin-related passive force. We conclude that a titin-like dynamic spring in the I-band, made by an undamped elastic element in-series with damped elastic elements, adapts its length to the SL with kinetics that provide force balancing among serially linked sarcomeres during contraction. In this way, the I-band spring plays a fundamental role in preventing the development of SL inhomogeneity.
Assuntos
Conectina/fisiologia , Contração Muscular , Músculo Esquelético/fisiologia , Sarcômeros/fisiologia , Animais , Anuros , Técnicas In VitroRESUMO
The contraction of striated muscle (skeletal and cardiac muscle) is generated by ATP-dependent interactions between the molecular motor myosin II and the actin filament. The myosin motors are mechanically coupled along the thick filament in a geometry not achievable by single-molecule experiments. Here we show that a synthetic one-dimensional nanomachine, comprising fewer than ten myosin II dimers purified from rabbit psoas, performs isometric and isotonic contractions at 2 mM ATP, delivering a maximum power of 5 aW. The results are explained with a kinetic model fitted to the performance of mammalian skeletal muscle, showing that the condition for the motor coordination that maximises the efficiency in striated muscle is a minimum of 32 myosin heads sharing a common mechanical ground. The nanomachine offers a powerful tool for investigating muscle contractile-protein physiology, pathology and pharmacology without the potentially disturbing effects of the cytoskeletal-and regulatory-protein environment.
Assuntos
Músculo Esquelético/metabolismo , Músculo Estriado/metabolismo , Miosina Tipo II/metabolismo , Citoesqueleto de Actina/metabolismo , Citoesqueleto de Actina/fisiologia , Trifosfato de Adenosina/metabolismo , Animais , Cinética , Masculino , Contração Muscular/fisiologia , Músculo Esquelético/fisiologia , Músculo Estriado/fisiologia , CoelhosRESUMO
Titin is a giant protein that provides elasticity to muscle. As the sarcomere is stretched, titin extends hierarchically according to the mechanics of its segments. Whether titin's globular domains unfold during this process and how such unfolded domains might contribute to muscle contractility are strongly debated. To explore the force-dependent folding mechanisms, here we manipulated skeletal-muscle titin molecules with high-resolution optical tweezers. In force-clamp mode, after quenching the force (<10 pN), extension fluctuated without resolvable discrete events. In position-clamp experiments, the time-dependent force trace contained rapid fluctuations and a gradual increase of average force, indicating that titin can develop force via dynamic transitions between its structural states en route to the native conformation. In 4 M urea, which destabilizes H-bonds hence the consolidated native domain structure, the net force increase disappeared but the fluctuations persisted. Thus, whereas net force generation is caused by the ensemble folding of the elastically-coupled domains, force fluctuations arise due to a dynamic equilibrium between unfolded and molten-globule states. Monte-Carlo simulations incorporating a compact molten-globule intermediate in the folding landscape recovered all features of our nanomechanics results. The ensemble molten-globule dynamics delivers significant added contractility that may assist sarcomere mechanics, and it may reduce the dissipative energy loss associated with titin unfolding/refolding during muscle contraction/relaxation cycles.
Assuntos
Conectina , Modelos Biológicos , Modelos Químicos , Contração Muscular/fisiologia , Músculo Esquelético/fisiologia , Dobramento de Proteína , Animais , Conectina/química , Conectina/metabolismo , Método de Monte Carlo , Pinças Ópticas , Domínios Proteicos , CoelhosRESUMO
Cytosine methylation is a key mechanism of epigenetic regulation. CpG-dense loci, called "CpG islands", play a particularly important role in modulating gene expression. Methylation has long been suspected to alter the physical properties of DNA, but the full spectrum of the evoked changes is unknown. Here we measured the methylation-induced nanomechanical changes in a DNA molecule with the sequence of a CpG island. For the molecule under tension, contour length, bending rigidity and intrinsic stiffness decreased in hypermethylated dsDNA, pointing at structural compaction which may facilitate DNA packaging in vivo. Intriguingly, increased forces were required to convert hypermethylated dsDNA into an extended S-form configuration. The reduction of force hysteresis during mechanical relaxation indicated that methylation generates a barrier against strand unpeeling and melting-bubble formation. The high structural stability is likely to have significant consequences on the recognition, replication, transcription, and reparation of hypermethylated genetic regions.
Assuntos
Ilhas de CpG/genética , Metilação de DNA , Fenômenos Mecânicos , Nanotecnologia , Pinças Ópticas , Sequência de Bases , Fenômenos BiomecânicosRESUMO
KEY POINTS: Myosin filament mechanosensing determines the efficiency of the contraction by adapting the number of switched ON motors to the load. Accordingly, the unloaded shortening velocity (V0 ) is already set at the end of latency relaxation (LR), â¼10 ms after the start of stimulation, when the myosin filament is still in the OFF state. Here the number of actin-attached motors per half-myosin filament (n) during V0 shortening imposed either at the end of LR or at the plateau of the isometric contraction is estimated from the relation between half-sarcomere compliance and force during the force redevelopment after shortening. The value of n decreases progressively with shortening and, during V0 shortening starting at the end of LR, is 1-4. Reduction of n is accounted for by a constant duty ratio of 0.05 and a parallel switching OFF of motors, explaining the very low rate of ATP utilization found during unloaded shortening. ABSTRACT: The maximum velocity at which a skeletal muscle can shorten (i.e. the velocity of sliding between the myosin filament and the actin filament under zero load, V0 ) is already set at the end of the latency relaxation (LR) preceding isometric force generation, â¼10 ms after the start of electrical stimulation in frog muscle fibres at 4°C. At this time, Ca2+ -induced activation of the actin filament is maximal, while the myosin filament is in the OFF state characterized by most of the myosin motors lying on helical tracks on the filament surface, making them unavailable for actin binding and ATP hydrolysis. Here, the number of actin-attached motors per half-thick filament during V0 shortening (n) is estimated by imposing, on tetanized single fibres from Rana esculenta (at 4°C and sarcomere length 2.15 µm), small 4 kHz oscillations and determining the relation between half-sarcomere (hs) compliance and force during the force development following V0 shortening. When V0 shortening is superimposed on the maximum isometric force T0 , n decreases progressively with the increase of shortening (range 30-80 nm per hs) and, when V0 shortening is imposed at the end of LR, n can be as low as 1-4. Reduction of n is accounted for by a constant duty ratio of the myosin motor of â¼0.05 and a parallel switching OFF of the thick filament, providing an explanation for the very low rate of ATP utilization during extended V0 shortening.
Assuntos
Contração Muscular , Fibras Musculares Esqueléticas/metabolismo , Miosinas/metabolismo , Actinas/metabolismo , Trifosfato de Adenosina/metabolismo , Animais , Cálcio/metabolismo , Fibras Musculares Esqueléticas/fisiologia , RanidaeRESUMO
BACKGROUND: We hypothesized that pathological perineal descent may be responsible for the failure of operations for obstructed defecation syndrome and that correcting excessive perineal descent may improve the outcome in this group of patients. OBJECTIVE: The purpose of this study was to report the short-term preliminary results of a novel surgical procedure, transverse perineal support, for the correction of pathological perineal descent. DESIGN: This was a prospective, uncontrolled, open-label study. SETTINGS: The study was conducted in a hospital and a university center. PATIENTS: Among 25 patients observed with failure of previous surgery for obstructed defecation syndrome, 12 with pathological perineal descent underwent transverse perineal support, were followed-up at 6 months, and constituted the object of analysis. INTERVENTIONS: The surgical procedure was performed positioning a porcine dermal implant just above the perineum superficial fascia sutured to the periosteum membrane of ischiatic tuberosities at the insertion of the superficial transverse perineal muscle. MAIN OUTCOME MEASURES: The main outcome measures were obstructed defecation syndrome score and x-ray and magnetic resonance defecographic imaging evaluation of perineal descent and anorectal manometric parameters. RESULTS: The postoperative median obstructed defecation syndrome score was 7.0 (range, 3-8), showing a statistically significant difference if compared with the preoperative score of 13.5 (range, 9-18; p = 0.0005). The mean postoperative maximum intrarectal pressure was 69.4 ± 11.1 mm Hg, significantly higher than the preoperative pressure of 45.9 ± 12.8 mm Hg (p < 0.0001). At postoperative x-ray and magnetic resonance imaging defecography, the mean fixed and dynamic perineal descents were significantly lower than the preoperative descents (p = 0.02 for fixed perineal descent and p = 0.0004 for dynamic perineal descent). Of the 4 patients (33.3%) with preoperative pathological dynamic perineal descent, only 1 showed a persistent pathological dynamic perineal descent. No early or late complication was observed. LIMITATIONS: The study was limited by its small size and short follow-up time. CONCLUSIONS: Transverse perineal support appears to be a promising, safe, and effective procedure in the treatment of obstructed defecation syndrome associated with pathological perineal descent (see Video, Supplemental Digital Content 1, http://links.lww.com/DCR/A225).
Assuntos
Constipação Intestinal/cirurgia , Distúrbios do Assoalho Pélvico/cirurgia , Períneo/cirurgia , Adulto , Idoso , Colágeno/uso terapêutico , Constipação Intestinal/etiologia , Feminino , Seguimentos , Humanos , Pessoa de Meia-Idade , Distúrbios do Assoalho Pélvico/complicações , Estudos Prospectivos , Reoperação , Síndrome , Resultado do TratamentoRESUMO
We report the case of a 62-year-old woman who developed a withdrawal syndrome after using a standard 1.5-mg transdermal scopolamine (TDS) patch behind the ear to prevent motion sickness during sailing. The patient, who had used TDS occasionally for years without significant adverse effects, more recently, having worn a patch continuously for 7 days, approximately 24 to 36 hours after removing the patch developed dizziness, nausea, sweating, fatigue, and drowsiness. All symptoms disappeared without therapy in about 2 days. Approximately 1 year after the first episode, though, a very similar, more severe disabling reaction developed on 2 occasions. Drowsiness and malaise were accompanied by severe asthenia, orthostatic sweating, inability to stand, and hypotension. All clinical tests (electrocardiogram; spirometry; blood cell count; plasma levels of cortisol, sodium, and potassium; and liver and kidney function tests) were negative, and symptoms disappeared slowly, after several days. Although we are certain that scopolamine was responsible for the symptoms, we are less clear as to the nature of the disorder. The effects being more severe after a more prolonged use of the TDS patch, the increase in severity each successive time, and the time lag between removing the patch and appearance of symptoms all indicated a withdrawal syndrome for which several mechanisms may be suggested.
Assuntos
Escopolamina/administração & dosagem , Escopolamina/efeitos adversos , Síndrome de Abstinência a Substâncias/etiologia , Feminino , Humanos , Pessoa de Meia-Idade , Adesivo TransdérmicoRESUMO
Titin is a giant filamentous protein of the muscle sarcomere in which stretch induces the unfolding of its globular domains. However, the mechanisms of how domains are progressively selected for unfolding and which domains eventually unfold have for long been elusive. Based on force-clamp optical tweezers experiments we report here that, in a paradoxical violation of mechanically driven activation kinetics, neither the global domain unfolding rate, nor the folded-state lifetime distributions of full-length titin are sensitive to force. This paradox is reconciled by a gradient of mechanical stability so that domains are gradually selected for unfolding as the magnitude of the force field increases. Atomic force microscopic screening of extended titin molecules revealed that the unfolded domains are distributed homogenously along the entire length of titin, and this homogeneity is maintained with increasing overstretch. Although the unfolding of domains with progressively increasing mechanical stability makes titin a variable viscosity damper, the spatially randomized variation of domain stability ensures that the induced structural changes are not localized but are distributed along the molecule's length. Titin may thereby provide complex safety mechanims for protecting the sarcomere against structural disintegration under excessive mechanical conditions.
Assuntos
Conectina/química , Desdobramento de Proteína , Animais , Apraxia Ideomotora , Microscopia de Força Atômica , Músculo Esquelético , Pinças Ópticas , Coelhos , ViscosidadeRESUMO
The half-sarcomere is the functional unit of striated muscle, in which, according to a "linear" mechanical model, myosin motors are parallel force generators with an average strain s acting between the opposing myosin and actin filaments that behave as a series elastic element with compliance Cf. Thus the definition of the mechanism of force generation by myosin motors in muscle requires integration of the crystallographic model of the working stroke with the mechanical constraints provided by the organization of motors in the half-sarcomere. The relation between half-sarcomere compliance and force (Chs-T) during the development of isometric contraction deviates, at low forces, from that predicted by the linear model, indicating the presence of an elastic element in parallel with the myosin motors, which may influence the estimate of s. A working stroke model, kinetically constrained by the early phase of the isotonic velocity transient following a force step, predicts that the rate of quick force recovery following a length step is reduced to the observed value by a Cf of 12.6nm/MPa. With this value of Cf, the fit of Chs-T relation during the isometric force rise gives s=1.8-1.9nm, similar to the values estimated using the linear model.
Assuntos
Actinas/metabolismo , Miofibrilas/metabolismo , Miosinas/metabolismo , Actinas/química , Animais , Fenômenos Biomecânicos , Simulação por Computador , Elasticidade , Cinética , Modelos Biológicos , Miofibrilas/química , Miosinas/química , Ranidae , Sarcômeros/química , Sarcômeros/metabolismoRESUMO
Titin is a giant elastomeric muscle protein that has been suggested to function as a sensor of sarcomeric stress and strain, but the mechanisms by which it does so are unresolved. To gain insight into its mechanosensory function we manipulated single titin molecules with high-resolution optical tweezers. Discrete, step-wise transitions, with rates faster than canonical Ig domain unfolding occurred during stretch at forces as low as 5 pN. Multiple mechanisms and molecular regions (PEVK, proximal tandem-Ig, N2A) are likely to be involved. The pattern of transitions is sensitive to the history of contractile events. Monte-Carlo simulations of our experimental results predicted that structural transitions begin before the complete extension of the PEVK domain. High-resolution atomic force microscopy (AFM) supported this prediction. Addition of glutamate-rich PEVK domain fragments competitively inhibited the viscoelastic response in both single titin molecules and muscle fibers, indicating that PEVK domain interactions contribute significantly to sarcomere mechanics. Thus, under non-equilibrium conditions across the physiological force range, titin extends by a complex pattern of history-dependent discrete conformational transitions, which, by dynamically exposing ligand-binding sites, could set the stage for the biochemical sensing of the mechanical status of the sarcomere.
Assuntos
Conectina/fisiologia , Animais , Fenômenos Biomecânicos , Conectina/química , Microscopia de Força Atômica , Contração Muscular , Estrutura Quaternária de Proteína , Estrutura Terciária de Proteína , CoelhosRESUMO
Under a tension of â¼65 pN, double-stranded DNA undergoes an overstretching transition from its basic (B-form) conformation to a 1.7 times longer conformation whose nature is only recently starting to be understood. Here we provide a structural and thermodynamic characterization of the transition by recording the length transient following force steps imposed on the λ-phage DNA with different melting degrees and temperatures (10-25°C). The shortening transient following a 20-35 pN force drop from the overstretching force shows a sequence of fast shortenings of double-stranded extended (S-form) segments and pauses owing to reannealing of melted segments. The lengthening transients following a 2-35 pN stretch to the overstretching force show the kinetics of a two-state reaction and indicate that the whole 70% extension is a B-S transition that precedes and is independent of melting. The temperature dependence of the lengthening transient shows that the entropic contribution to the B-S transition is one-third of the entropy change of thermal melting, reinforcing the evidence for a double-stranded S-form that maintains a significant fraction of the interstrand bonds. The cooperativity of the unitary elongation (22 bp) is independent of temperature, suggesting that structural factors, such as the nucleic acid sequence, control the transition.
Assuntos
DNA/química , Cinética , Desnaturação de Ácido Nucleico , Temperatura , TermodinâmicaRESUMO
We study the kinetics of the overstretching transition in λ-phage double-stranded (ds) DNA from the basic conformation (B state) to the 1.7-times longer and partially unwound conformation (S state), using the dual-laser optical tweezers under force-clamp conditions at 25°C. The unprecedented resolution of our piezo servo-system, which can impose millisecond force steps of 0.5-2 pN, reveals the exponential character of the elongation kinetics and allows us to test the two-state nature of the B-S transition mechanism. By analyzing the load-dependence of the rate constant of the elongation, we find that the elementary elongation step is 5.85 nm, indicating a cooperativity of ~25 basepairs. This mechanism increases the free energy for the elementary reaction to ~94 k(B)T, accounting for the stability of the basic conformation of DNA, and explains why ds-DNA can remain in equilibrium as it overstretches.