Maduramycin, a novel glycosylation modulator for mammalian fed-batch and steady-state perfusion processes.

Controlling high-mannose (HM) content of therapeutic proteins during process intensification, reformulation for subcutaneous delivery, antibody-drug conjugate or biosimilar manufacturing represents an ongoing challenge. Even though a range of glycosylation levers to increase HM content exist, modulators specially increasing M5 glycans are still scarce. Several compounds of the polyether ionophore family were screened for their ability to selectively increase M5 glycans of mAb products and compared to the well-known α-mannosidase I inhibitor kifunensine known to increase mainly M8-M9 glycans. Maduramycin, amongst other promising polyether ionophores, showed the desired effect on different cell lines. For fed-batch processes, a double bolus addition modulator feed strategy was developed maximizing the effect on glycosylation by minimizing impact on culture performance. Further, a continuous feeding strategy for steady-state perfusion processes was successfully developed, enabling consistent product quality at elevated HM glycan levels. With kifunensine and maduramycin showing inverse effects on the relative HM distribution, a combined usage of these modulators was further evaluated to fine-tune a desired HM glycan pattern. The discovered HM modulators expand the current HM modulating toolbox for biotherapeutics. Their application not only for fed-batch processes, but also steady-state perfusion processes, make them a universal tool with regards to fully continuous manufacturing processes.

Raman-controlled pyruvate feeding to control metabolic activity and product quality in continuous biomanufacturing.

BACKGROUND: Despite technological advances ensuring stable cell culture perfusion operation over prolonged time, reaching a cellular steady-state metabolism remains a challenge for certain manufacturing cell lines. This study investigated the stabilization of a steady-state perfusion process producing a bispecific antibody with drifting product quality attributes, caused by shifting metabolic activity in the cell culture. MAIN METHODS: A novel on-demand pyruvate feeding strategy was developed, leveraging lactate as an indicator for tricarboxylic acid (TCA) cycle saturation. Real-time lactate monitoring was achieved through in-line Raman spectroscopy, enabling accurate control at predefined target setpoints. MAJOR RESULTS: The implemented feedback control strategy resulted in a three-fold reduction of ammonium accumulation and stabilized product quality profiles. Stable and flat glycosylation profiles were achieved with standard deviations below 0.2% for high mannose and fucosylation. Whereas galactosylation and sialylation were stabilized in a similar manner, varying lactate setpoints might allow for fine-tuning of these glycan forms. IMPLICATION: The Raman-controlled pyruvate feeding strategy represents a valuable tool for continuous manufacturing, stabilizing metabolic activity, and preventing product quality drifting in perfusion cell cultures. Additionally, this approach effectively reduced high mannose, helping to mitigate increases associated with process intensification, such as extended culture durations or elevated culture densities.

Co-current filtrate flow in TFF perfusion processes: Decoupling transmembrane pressure from crossflow to improve product sieving.

Hollow fiber-based membrane filtration has emerged as the dominant technology for cell retention in perfusion processes yet significant challenges in alleviating filter fouling remain unsolved. In this work, the benefits of co-current filtrate flow applied to a tangential flow filtration (TFF) module to reduce or even completely remove Starling recirculation caused by the axial pressure drop within the module was studied by pressure characterization experiments and perfusion cell culture runs. Additionally, a novel concept to achieve alternating Starling flow within unidirectional TFF was investigated. Pressure profiles demonstrated that precise flow control can be achieved with both lab-scale and manufacturing-scale filters. TFF systems with co-current flow showed up to 40% higher product sieving compared to standard TFF. The decoupling of transmembrane pressure from crossflow velocity and filter characteristics in co-current TFF alleviates common challenges for hollow fiber-based systems such as limited crossflow rates and relatively short filter module lengths, both of which are currently used to avoid extensive pressure drop along the filtration module. Therefore, co-current filtrate flow in unidirectional TFF systems represents an interesting and scalable alternative to standard TFF or alternating TFF operation with additional possibilities to control Starling recirculation flow.

Advancing Raman model calibration for perfusion bioprocesses using spiked harvest libraries.

BACKGROUND: Raman spectroscopy has gained popularity to monitor multiple process indicators simultaneously in biopharmaceutical processes. However, robust and specific model calibration remains a challenge due to insufficient analyte variability to train the models and high cross-correlation of various media components and artifacts throughout the process. MAIN METHODS: A systematic Raman calibration workflow for perfusion processes enabling highly specific and fast model calibration was developed. Harvest libraries consisting of frozen harvest samples from multiple CHO cell culture bioreactors collected at different process times were established. Model calibration was subsequently performed in an offline setup using a flow cell by spiking process harvest with glucose, raffinose, galactose, mannose, and fructose. MAJOR RESULTS: In a screening phase, Raman spectroscopy was proven capable not only to distinguish sugars with similar chemical structures in perfusion harvest but also to quantify them independently in process-relevant concentrations. In a second phase, a robust and highly specific calibration model for simultaneous glucose (root mean square error prediction [RMSEP] = 0.32 g L-1 ) and raffinose (RMSEP = 0.17 g L-1 ) real-time monitoring was generated and verified in a third phase during a perfusion process. IMPLICATION: The proposed novel offline calibration workflow allowed proper Raman peak decoupling, reduced calibration time from months down to days, and can be applied to other analytes of interest including lactate, ammonia, amino acids, or product titer.

Transfer of continuous manufacturing process principles for mAb production in a GMP environment: A step in the transition from batch to continuous.

Implementation of continuous in lieu of batch upstream processing (USP) and downstream process (DSP) for the production of recombinant therapeutic protein is a significant paradigm change. The present report describes how the first kilograms of monoclonal antibody were produced with equipment originally designed for batch operations while using continuous manufacturing processes and principles. Project timelines for the delivery of clinical material have driven this ambition and helped the transition. Nevertheless, because of equipment availability, a tradeoff between the envisaged continuous downstream process (cDSP) operations and the ones described in this article had to be taken. A total of 2.1 kg of monoclonal antibody were produced in two GMP runs for clinical trials. For USP, a 200-L single-use pilot scale bioreactor was upgraded to enable perfusion operation. DSP steps were designed to be easily transferable to cDSP for later clinical or commercial productions. An in-line conditioning buffer preparation strategy was tested in a discontinuous way to prove its efficiency and the purification cascade was structured in parallel to the continuous collection of antibody-containing cell culture supernatant. This strategy will avoid any process change when later moving to the continuous equipment that is currently under qualification. Alignment between small-scale references runs and the GMP runs in terms of productivity and quality confirmed that the presented approach was valid. Thus, we demonstrate that existing fed-batch infrastructure can be adapted to continuous manufacturing without significant additional investments. Such approach is useful to evaluate next-generation manufacturing processes before making large investments.

Effects of pyruvate on primary metabolism and product quality for a high-density perfusion process.

High volumetric productivities can be achieved when perfusion processes are operated at high cell densities. Yet it is fairly challenging to keep high cell density cultures in a steady state over an extended period. Aiming for robust processes, cultures were operated at a constant biomass specific perfusion rate (BSPR) in this study. The cell density was monitored with a capacitance probe and a continuous bleed maintained the targeted viable cell volume. Despite our tightly controlled BSPR, a gradual accumulation of ammonium and changes in cell diameter were observed during the production phase for three different monoclonal antibodies. Although a lot of efforts in media optimization have been made to reduce ammonium in fed-batch process, less examples are known about how media components impact the cellular metabolism and thus the quality of monoclonal antibodies in continuous processes. In this study, we show that a continuous Na-pyruvate feed (2 g/L/day) strongly reduced ammonium production and stabilized fucosylation, sialylation and high mannose content for three different mAbs.

Reduction of medium consumption in perfusion mammalian cell cultures using a perfusion rate equivalent concentrated nutrient feed.

Media preparation for perfusion cell culture processes contributes significantly to operational costs and the footprint of continuous operations for therapeutic protein manufacturing. In this study, definitions are given for the use of a perfusion equivalent nutrient feed stream which, when used in combination with basal perfusion medium, supplements the culture with targeted compounds and increases the medium depth. Definitions to compare medium and feed depth are given in this article. Using a concentrated nutrient feed, a 1.8-fold medium consumption (MC) decrease and a 1.67-fold increase in volumetric productivity (PR) were achieved compared to the initial condition. Later, this strategy was used to push cell densities above 100 × 106 cells/ml while using a perfusion rate below 2 RV/day. In this example, MC was also decreased 1.8-fold compared to the initial condition, but due to the higher cell density, PR was increased 3.1-fold and to an average PR value of 1.36 g L-1 day-1 during a short stable phase, and versus 0.46 g L-1 day-1 in the initial condition. Overall, the performance improvements were aligned with the given definitions. This multiple feeding strategy can be applied to gain some flexibility during process development and also in a manufacturing set-up to enable better control on nutrient addition.

Perfusion cell culture for the production of conjugated recombinant fusion proteins reduces clipping and quality heterogeneity compared to batch-mode processes.

Perfusion cell culture technologies for the production of therapeuthic recombinant proteins are currently on the rise for diverse applications with the aim of process intensification (Bielser et al., 2018; Chen et al., 2018; Fisher et al., 2018; Jordan et al., 2018). This study reports a unique comparison of low (LS) and high (HS) seeding fed-batch bioreactors, corresponding to traditional and intensified operation using perfusion at the N-1 stage, respectively, with perfusion (PF) bioreactors, using a bispecific conjugated fusion protein as a model. It is found that the gain in daily volumetric productivity compared to the traditional LS fed-batch, increases by a factor 3 with HS and 7 with PF. Critical quality attributes (CQAs) also benefited from the perfusion operation. In particular, levels of clipping, that is the fragmentation of the fusion protein, are significantly reduced compared to both fed-batch operations. In PF the clipping varied between 0.6 and 1.5% while in the LS and HS it reached up to 8.7 and 4.9%, respectively. Aggregate levels were also decreased using PF, while the charge variant distribution was more homogeneous and the glycosylation pattern was also significantly affected. The comparison of LS, HS and PF for the manufacturing of a bispecific conjugated fusion protein reported here highlight some productivity and quality benefits inherent to the nature of continuous processing.

Semi-continuous scale-down models for clone and operating parameter screening in perfusion bioreactors.

Perfusion cell culture, confined traditionally to the production of fragile molecules, is currently gaining broader attention in the biomanufacturing of therapeutic proteins. The development of these processes is made difficult by the limited availability of appropriate scale-down models. This is due to the continuous operation that requires complex control and cell retention capacity. For example, the determination of an optimal perfusion and bleed rate for continuous cell culture is often performed in scale-down bioreactors and requires a substantial amount of time and effort. To increase the experimental throughput and decrease the required workload, a semi-continuous procedure, referred to as the VCDmax (viable cell density) approach, has been developed on the basis of shake tubes (ST) and deepwell plates (96-DWP). Its effectiveness has been demonstrated for 12 different CHO-K1-SV cell lines expressing an IgG1. Further, its reliability has been investigated through proper comparisons with perfusion runs in lab-scale bioreactors. It was found that the volumetric productivity and the CSPRmin (cell specific perfusion rate) determined using the ST and 96-DWP models were successfully (mostly within the experimental error) confirmed in lab-scale bioreactors, which then covered a significant scale-up from the half milliliter to the liter scale. These scale-down models are very useful to design and scale-up optimal bioreactor operating conditions as well as screening for different media and cell lines.

Improved Performance in Mammalian Cell Perfusion Cultures by Growth Inhibition.

Mammalian cell perfusion cultures represent a promising alternative to the current fed-batch technology for the production of various biopharmaceuticals. Long-term operation at a fixed viable cell density (VCD) requires a viable culture and a constant removal of excessive cells. Product loss in the cell removing bleed stream deteriorates the process yield. In this study, the authors investigate the use of chemical and environmental growth inhibition on culture performance by either adding valeric acid (VA) to the production media or by reducing the culture temperature (33.0 °C) with respect to control conditions (36.5 °C, no VA). Low temperature significantly reduces cellular growth, thus, resulting in lower bleed rates accompanied by a reduced product loss of 11% compared to 26% under control conditions. Additionally, the cell specific productivity of the target protein improves and maintained stable leading to media savings per mass of product. VA shows initially an inhibitory effect on cellular growth. However, cells seemed to adapt to the presence of the inhibitor resulting in a recovery of the cellular growth. Cell cycle and Western blot analyses support the observed results. This work underlines the role of temperature as a key operating variable for the optimization of perfusion cultures.

Perfusion mammalian cell culture for recombinant protein manufacturing - A critical review.

The manufacturing of recombinant protein is traditionally divided in two main steps: upstream (cell culture and synthesis of the target protein) and downstream (purification and formulation of the protein into a drug substance or drug product). Today, cost pressure, market uncertainty and market growth, challenge the existing manufacturing technologies. Leaders in the field are active in designing the process of the future and continuous manufacturing is recurrently mentioned as a potential solution to address some of the current limitations. This review focuses on the application of continuous processing to the first step of the manufacturing process. Enabling technologies and operation modes are described in the first part. In the second part, recent advances in the field that have the potential to support its successful future development are critically discussed.

Modulation and modeling of monoclonal antibody N-linked glycosylation in mammalian cell perfusion reactors.

Mammalian cell perfusion cultures are gaining renewed interest as an alternative to traditional fed-batch processes for the production of therapeutic proteins, such as monoclonal antibodies (mAb). The steady state operation at high viable cell density allows the continuous delivery of antibody product with increased space-time yield and reduced in-process variability of critical product quality attributes (CQA). In particular, the production of a confined mAb N-linked glycosylation pattern has the potential to increase therapeutic efficacy and bioactivity. In this study, we show that accurate control of flow rates, media composition and cell density of a Chinese hamster ovary (CHO) cell perfusion bioreactor allowed the production of a constant glycosylation profile for over 20 days. Steady state was reached after an initial transition phase of 6 days required for the stabilization of extra- and intracellular processes. The possibility to modulate the glycosylation profile was further investigated in a Design of Experiment (DoE), at different viable cell density and media supplement concentrations. This strategy was implemented in a sequential screening approach, where various steady states were achieved sequentially during one culture. It was found that, whereas high ammonia levels reached at high viable cell densities (VCD) values inhibited the processing to complex glycan structures, the supplementation of either galactose, or manganese as well as their synergy significantly increased the proportion of complex forms. The obtained experimental data set was used to compare the reliability of a statistical response surface model (RSM) to a mechanistic model of N-linked glycosylation. The latter outperformed the response surface predictions with respect to its capability and reliability in predicting the system behavior (i.e., glycosylation pattern) outside the experimental space covered by the DoE design used for the model parameter estimation. Therefore, we can conclude that the modulation of glycosylation in a sequential steady state approach in combination with mechanistic model represents an efficient and rational strategy to develop continuous processes with desired N-linked glycosylation patterns. Biotechnol. Bioeng. 2017;114: 1978-1990. © 2017 Wiley Periodicals, Inc.

Robust factor selection in early cell culture process development for the production of a biosimilar monoclonal antibody.

This work presents a multivariate methodology combining principal component analysis, the Mahalanobis distance and decision trees for the selection of process factors and their levels in early process development of generic molecules. It is applied to a high throughput study testing more than 200 conditions for the production of a biosimilar monoclonal antibody at microliter scale. The methodology provides the most important selection criteria for the process design in order to improve product quality towards the quality attributes of the originator molecule. Robustness of the selections is ensured by cross-validation of each analysis step. The concluded selections are then successfully validated with an external data set. Finally, the results are compared to those obtained with a widely used software revealing similarities and clear advantages of the presented methodology. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:181-191, 2017.

Screening and assessment of performance and molecule quality attributes of industrial cell lines across different fed-batch systems.

The major challenge in the selection process of recombinant cell lines for the production of biologics is the choice, early in development, of a clonal cell line presenting a high productivity and optimal cell growth. Most importantly, the selected candidate needs to generate a product quality profile which is adequate with respect to safety and efficacy and which is preserved across cell culture scales. We developed a high-throughput screening and selection strategy of recombinant cell lines, based on their productivity in shaking 96-deepwell plates operated in fed-batch mode, which enables the identification of cell lines maintaining their high productivity at larger scales. Twelve recombinant cell lines expressing the same antibody with different productivities were selected out of 470 clonal cell lines in 96-deepwell plate fed-batch culture. They were tested under the same conditions in 50 mL vented shake tubes, microscale and lab-scale bioreactors in order to confirm the maintenance of their performance at larger scales. The use of a feeding protocol and culture conditions which are essentially the same across the different scales was essential to maintain productivity and product quality profiles across scales. Compared to currently used approaches, this strategy has the advantage of speeding up the selection process and increases the number of screened clones for getting high-producing recombinant cell lines at manufacturing scale with the desired performance and quality.