Stable Molybdenum(0) Carbonyl Complex for Upconversion and Photoredox Catalysis.

Photoactive complexes with earth-abundant metals have attracted increasing interest in the recent years fueled by the promise of sustainable photochemistry. However, sophisticated ligands with complicated syntheses are oftentimes required to enable photoactivity with nonprecious metals. Here, we combine a cheap metal with simple ligands to easily access a photoactive complex. Specifically, we synthesize the molybdenum(0) carbonyl complex Mo(CO)3(tpe) featuring the tripodal ligand 1,1,1-tris(pyrid-2-yl)ethane (tpe) in two steps with a high overall yield. The complex shows intense deep-red phosphorescence with excited state lifetimes of several hundred nanoseconds. Time-resolved infrared spectroscopy and laser flash photolysis reveal a triplet metal-to-ligand charge-transfer (3MLCT) state as the lowest excited state. Temperature-dependent luminescence complemented by density functional theory (DFT) calculations suggest thermal deactivation of the 3MLCT state via higher lying metal-centered states in analogy to the well-known photophysics of [Ru(bpy)3]2+. Importantly, we found that the title compound is very photostable due to the lack of labilized Mo-CO bonds (as caused by trans-coordinated CO) in the facial configuration of the ligands. Finally, we show the versatility of the molybdenum(0) complex in two applications: (1) green-to-blue photon upconversion via a triplet-triplet annihilation mechanism and (2) photoredox catalysis for a green-light-driven dehalogenation reaction. Overall, our results establish tripodal carbonyl complexes as a promising design strategy to access stable photoactive complexes of nonprecious metals avoiding tedious multistep syntheses.

A Vanadium(III) Complex with Blue and NIR-II Spin-Flip Luminescence in Solution.

Luminescence from Earth-abundant metal ions in solution at room temperature is a very challenging objective due to the intrinsically weak ligand field splitting of first-row transition metal ions, which leads to efficient nonradiative deactivation via metal-centered states. Only a handful of 3dn metal complexes (n ≠ 10) show sizable luminescence at room temperature. Luminescence in the near-infrared spectral region is even more difficult to achieve as further nonradiative pathways come into play. No Earth-abundant first-row transition metal complexes have displayed emission >1000 nm at room temperature in solution up to now. Here, we report the vanadium(III) complex mer-[V(ddpd)2][PF6]3 yielding phosphorescence around 1100 nm in valeronitrile glass at 77 K as well as at room temperature in acetonitrile with 1.8 × 10-4% quantum yield (ddpd = N,N'-dimethyl-N,N'-dipyridine-2-ylpyridine-2,6-diamine). In addition, mer-[V(ddpd)2][PF6]3 shows very strong blue fluorescence with 2% quantum yield in acetonitrile at room temperature. Our comprehensive study demonstrates that vanadium(III) complexes with d2 electron configuration constitute a new class of blue and NIR-II luminophores, which complement the classical established complexes of expensive precious metals and rare-earth elements.

Receptor-mediated uptake of boron-rich neuropeptide y analogues for boron neutron capture therapy.

Peptidic ligands selectively targeting distinct G protein-coupled receptors that are highly expressed in tumor tissue represent a promising approach in drug delivery. Receptor-preferring analogues of neuropeptide Y (NPY) bind and activate the human Y1 receptor subtype (hY1 receptor), which is found in 90% of breast cancer tissue and in all breast-cancer-derived metastases. Herein, novel highly boron-loaded Y1 -receptor-preferring peptide analogues are described as smart shuttle systems for carbaboranes as (10) B-containing moieties. Various positions in the peptide were screened for their susceptibility to carbaborane modification, and the most promising positions were chosen to create a multi-carbaborane peptide containing 30 boron atoms per peptide with excellent activation and internalization patterns at the hY1 receptor. Boron uptake studies by inductively coupled plasma mass spectrometry revealed successful uptake of the multi-carbaborane peptide into hY1 -receptor-expressing cells, exceeding the required amount of 10(9) boron atoms per cell. This result demonstrates that the NPY/hY receptor system can act as an effective transport system for boron-containing moieties.

Halo-shaped flowing atmospheric pressure afterglow: a heavenly design for simplified sample introduction and improved ionization in ambient mass spectrometry.

The flowing atmospheric-pressure afterglow (FAPA) is a promising new source for atmospheric-pressure, ambient desorption/ionization mass spectrometry. However, problems exist with reproducible sample introduction into the FAPA source. To overcome this limitation, a new FAPA geometry has been developed in which concentric tubular electrodes are utilized to form a halo-shaped discharge; this geometry has been termed the halo-FAPA or h-FAPA. With this new geometry, it is still possible to achieve direct desorption and ionization from a surface; however, sample introduction through the inner capillary is also possible and improves interaction between the sample material (solution, vapor, or aerosol) and the plasma to promote desorption and ionization. The h-FAPA operates with a helium gas flow of 0.60 L/min outer, 0.30 L/min inner, and applied current of 30 mA at 200 V for 6 W of power. In addition, separation of the discharge proper and sample material prevents perturbations to the plasma. Optical-emission characterization and gas rotational temperatures reveal that the temperature of the discharge is not significantly affected (<3% change at 450 K) by water vapor during solution-aerosol sample introduction. The primary mass-spectral background species are protonated water clusters, and the primary analyte ions are protonated molecular ions (M + H(+)). Flexibility of the new ambient sampling source is demonstrated by coupling it with a laser ablation unit, a concentric nebulizer, and a droplet-on-demand system for sample introduction. A novel arrangement is also presented in which the central channel of the h-FAPA is used as the inlet to a mass spectrometer.

Drop-on-demand sample introduction system coupled with the flowing atmospheric-pressure afterglow for direct molecular analysis of complex liquid microvolume samples.

One of the fastest developing fields in analytical spectrochemistry in recent years is ambient desorption/ionization mass spectrometry (ADI-MS). This burgeoning interest has been due to the demonstrated advantages of the method: simple mass spectra, little or no sample preparation, and applicability to samples in the solid, liquid, or gaseous state. One such ADI-MS source, the flowing atmospheric-pressure afterglow (FAPA), is capable of direct analysis of solids just by aiming the source at the solid surface and sampling the produced ions into a mass spectrometer. However, direct introduction of significant volumes of liquid samples into this source has not been possible, as solvent loads can quench the afterglow and, thus, the formation of reagent ions. As a result, the analysis of liquid samples is preferably carried out by analyzing dried residues or by desorbing small amounts of liquid samples directly from the liquid surface. In the former case, reproducibility of sample introduction is crucial if quantitative results are desired. In the present study, introduction of liquid samples as very small droplets helps overcome the issues of sample positioning and reduced levels of solvent intake. A recently developed "drop-on-demand" (DOD) aerosol generator is capable of reproducibly producing very small volumes of liquid (∼17 pL). In this paper, the coupling of FAPA-MS and DOD is reported and applications are suggested. Analytes representing different classes of substances were tested and limits of detections were determined. Matrix tolerance was investigated for drugs of abuse and their metabolites by analyzing raw urine samples and quantification without the use of internal standards. Limits of detection below 2 µg/mL, without sample pretreatment, were obtained.

Application of mass spectrometric techniques for the trace analysis of short-lived iodine-containing volatiles emitted by seaweed.

Knowledge of the composition and emission rates of iodine-containing volatiles from major widespread seaweed species is important for modeling the impact of halogens on gas-phase atmospheric chemistry, new particle formation, and climate. In this work, we present the application of mass spectrometric techniques for the quantification of short-lived iodine-containing volatiles emitted by eight different seaweeds from the intertidal zone of Helgoland, Germany. A previously developed online time-of-flight aerosol mass spectrometric method was used to determine I(2) emission rates and investigate temporally resolved emission profiles. Simultaneously, iodocarbons were preconcentrated on solid adsorbent tubes and quantified offline using thermodesorption-gas chromatography-mass spectrometry. The total iodine content of the seaweeds was determined using microwave-assisted tetramethylammonium hydroxide extraction followed by inductively coupled-plasma mass spectrometry analysis. The highest total iodine content was found in the Laminariales, followed by the brown algae Ascophyllum nodosum, Fucus vesiculosus, Fucus serratus, and both red algae Chondrus crispus and Delesseria sanguinea. Laminariales were found to be the strongest I(2) emitters. Time series of the iodine release of Laminaria digitata and Laminaria hyperborea showed a strong initial I(2) emission when first exposed to air followed by an exponential decline of the release rate. For both species, I(2) emission bursts were observed. For Laminaria saccharina und F. serratus, a more continuous I(2) release profile was detected, however, F. serratus released much less I(2). A. nodosum and F. vesiculosus showed a completely different emission behavior. The I(2) emission rates of these species were slowly increasing with time during the first 1 to 2 h until a more or less stable I(2) emission rate was reached. The lowest I(2) emission rates were detected for the red algae C. crispus and D. sanguinea. Total iodocarbon emission rates showed almost the same general trend, however, the total iodocarbon emission rates were about one to two orders of magnitude lower than those of molecular iodine, demonstrating that I(2) is the major iodine containing volatile released by the investigated seaweed species. In addition, a clear dependency of iodocarbon emission from the ozone level (0-150 ppb O(3)) was found for L. digitata.

Characteristics of picoliter droplet dried residues as standards for direct analysis techniques.

The characteristics of dried residues of picodroplets of single-, two-, and three-element aqueous solutions, which qualify these as reference materials in the direct analysis of single particles, single cells, and other microscopic objects using, e.g., laser ablation inductively coupled plasma time-of-flight mass spectrometry (LA-ICP-TOF-MS) and micro-X-ray fluorescence (MXRF), were evaluated. Different single-, two-, and three-element solutions (0.01-1 g/L) were prepared in picoliter volume (around 130 pL) with a thermal inkjet printing technique. An achievable dosing precision of 4-15% was calculated by total reflection X-ray fluorescence (TXRF) determination of the transferred elemental mass of an array of 100 droplets. The size of the dried residues was determined by optical microscopy to be 5-20 microm in diameter depending on the concentration and the surface material. The elemental distribution of the dried residues was determined with synchrotron micro-X-ray fluorescence (SR-MXRF) analyses. The MXRF results show high uniformity for element deposition of every single droplet with an RSTD of 4-6% depending on the concentration of spotted solution. The shape and height profile of dried residues from picoliter droplets were studied using atomic force microscopy (AFM). It was found that these dry to give symmetrical spherical segments with maximum heights of 1.7 microm. The potential of this technique for direct LA-ICP-TOF-MS analysis is shown.

Optimization and comparison of chemical and electrochemical hydride generation for optical emission spectrometric determination of arsenic and antimony using a novel miniaturized microwave induced argon plasma exiting the microstrip wafer.

Continuous flow (CF) chemical hydride generation (CHG) and electrochemical hydride generation (ECHG) directly coupled to a novel 40W, atmospheric pressure, 2.45GHz microwave microstrip Ar plasma exiting a microstrip wafer has been developed for the emission spectrometric determination of As and Sb using a miniaturized optical fiber spectrometer and a CCD-array detector. The experimental conditions for both procedures were optimized with respect to the relative net intensities of the As I 228.8 nm and Sb I 252.8 nm lines and their signal-to-background intensity ratios. Additionally, the susceptibility to interferences from Cd, Co, Cr, Cu, Fe, Ni, Pb and Zn and other hydride-forming elements in the determination of As and Sb using the CHG and ECHG techniques was investigated in detail. Under the optimized conditions, it was found that ECHG is more prone to interferences compared to CHG. The detection limits (3sigma) of As (6 ngmL(-1)) and Sb (7 ngmL(-1)) obtained for the ECHG-MSP-OES method are about three times lower than in the case of the CHG-MSP-OES method due to a two-fold lower amount of H2 introduced into the MSP in case of the ECHG, resulting in a better plasma stability and reduced background level. The linearity ranges for both calibration curves to a concentration of up to 5 microgmL(-1) and a precision between 2% and 7% (2 microgmL(-1) and 0.050 microgmL(-1) of As and Sb, respectively) were found for both methods. The developed ECHG-MSP-OES method was validated for As through the analysis of a certified coal fly ash standard reference material (NIST SRM 1633a) after sample dissolution. The derived concentration (140+/-8 microgg(-1)) was found to agree well with the certified data (145+/-15 microgg(-1)). The method was also successfully applied to the analysis of both a galvanic bath sample, which contained Sb and was spiked with As, and a tap water sample spiked with both analytes. Recovery rates of 99-101% and a Sb concentration of 6.6 microgmL(-1) in the galvanic bath sample were revealed. The latter value showed a good agreement with the data obtained from ICP-OES analysis, which was also used for validation purpose.

Evaluation and application of argon and helium microstrip plasma for the determination of mercury by the cold vapor technique and optical emission spectrometry.

The suitability of a 2.45-GHz atmospheric pressure, low-power microwave microstrip plasma (MSP) operated with Ar and He for the determination of Hg by continuous-flow cold vapor (CV) generation, using SnCl2/HCl as the reducing agent, and optical emission spectrometry (OES) using a small CCD spectrometer was studied. The areas of stability for a discharge in the Ar and in the He MSP enclosed in a cylindrical channel in a quartz wafer were investigated. The excitation temperatures as measured for discharge gas atoms (Ar I, He I), and the electron number densities at 35-40 W and 15-400 mL min(-1) were found to be at the order of 3,200-5,500 K and 0.8x10(14)-1.6x10(14) cm(-3), respectively. The relative intensity of the Hg I 253.6-nm line and the signal-to-background ratio as a function of the forward power (35-40 W) as well as of the flow rate of the working gas (15-400 mL min(-1)) were evaluated and discussed. For the selected measurement conditions, the Ar MSP was established to have the lower detection limit for Hg (0.6 ng mL(-1)) compared with the He MSP. The linearity range is up to 300 ng mL(-1) and the precision is on the order of 1-3%. With the optimized CV Ar MSP-OES method a determination of Hg in spiked domestic and natural waters at concentration levels of 20-100 microg L(-1) and an accuracy of 1-4% could be performed. In an NIST domestic sludge standard reference material, Hg (3.64 microg g(-1)) could be determined with a relative standard deviation of 4% and an agreement better than 4%.