Biochemical and microbiological characterization of a thermotolerant bacterial consortium involved in the corrosion of Aluminum Alloy 7075.

Microorganisms can play a significant role in material corrosion, with bacterial biofilms as major participants in microbially influenced corrosion (MIC). The exact mechanisms by which this takes place are poorly understood, resulting in a scarcity of information regarding MIC detection and prevention. In this work, a consortium of moderately thermophilic bacteria isolated from a biofilm growing over aluminum alloy 7075 was characterized. Its effect over the alloy was evaluated on a 40-day period using Electron Microscopy, demonstrating acceleration of corrosion in comparison to the abiotic control. The bacterial consortium was biochemically and microbiologically characterized as an attempt to elucidate factors contributing to corrosion. Molecular analysis revealed that the consortium consisted mainly of members of the Bacillus genus, with lower abundance of other genera such as Thermoanaerobacterium, Anoxybacillus and Paenibacillus. The EPS polysaccharide presented mainly mannose, galactose, rhamnose and ribose. Our observations suggest that the acidification of the culture media resulting from bacterial metabolism acted as the main contributor to corrosion, hinting at an unspecific mechanism. The consortium was not sulfate-reducing, but it was found to produce hydrogen, which could also be a compounding factor for corrosion.

Characterization of the EPS from a thermophilic corrosive consortium.

Biofilm forming microorganisms are known to contribute to the corrosion of metallic materials, as they can attach to surfaces and influence the electrochemical behavior. Extracellular polymeric substances (EPS) produced by these microorganisms play a major role in adhesion and resistance of the biofilm, thus also contributing to corrosion. A better understanding of the composition of EPS could help mitigate the impact of bacterial mediated corrosion. Here, a preliminary characterization of the EPS from a thermophilic consortium isolated from a corroded airplane engine is presented. Analysis revealed five different monosaccharides, with predominance of glucose and manose, but also a significant amount of rhamnose. Glycosyl linkage analysis was also performed. On the lipid fraction, three types of fatty acids were found. The predominant protein found by peptide finger printing was S-Layer protein, related to bacterial adhesion. Morphological characterization of the biofilm forming consortium was carried using confocal and scanning electron microscopy.

Inhibiting Pathogen Surface Adherence by Multilayer Polyelectrolyte Films Functionalized with Glucofuranose Derivatives.

Inhibiting pathogenic bacterial adherence on surfaces is an ongoing challenge to prevent the development of biofilms. Multilayer polyelectrolyte films are feasible antibacterial materials. Here, we have designed new films made of carbohydrate polyelectrolytes to obtain antibacterial coatings that prevent biofilm formation. The polyelectrolyte films were constructed from poly(maleic anhydride- alt-styrene) functionalized with glucofuranose derivatives and quaternized poly(4-vinylpyridine) N-alkyl. These films prevent Pseudomonas aeruginosa and Salmonella Typhimurium, two important bacterial contaminants in clinical environments, from adhering to surfaces. When the film was composed of more than 10 layers, the bacterial population was greatly reduced, while the bacteria remaining on the film were morphologically damaged, as atomic force microscopy revealed. The antibacterial capacity of the polyelectrolyte films was determined by the combination of thickness, wettability, surface energy, and most importantly, the conformation that polyelectrolytes adopt the function of nature of the carbohydrate group. This polyelectrolyte film constitutes the first green approach to preventing pathogenic bacterial surface adherence and proliferation without killing the bacterial pathogen.

Design aspects of compliant, soft layer bearings for an experimental hip prosthesis.

Currently, an artificial hip joint can be expected to last, on average, in excess of 15 years with failure due, in the majority of cases, to late aseptic loosening of the acetabular component. A realistic alternative to the problem of wear in conventional joints is the introduction of bearing surfaces that exhibit low wear and operate in the full fluid-film lubrication regime. Contact analyses and friction tests were performed on compliant layer joints (metal-on-polyurethane) and the design of a prototype ovine arthroplasty model was investigated. When optimized, these components have been shown to achieve full fluid-film lubrication.

Purification and characterization of an iron-nickel hydrogenase from Thermococcus celer.

Thermococcus celer cells contain a single hydrogenase located in the cytoplasm, which has been purified to apparent homogeneity using three chromatographic steps: Q-Sepharose, DEAE-Fast Flow, and Sephacryl S-200. In vitro assays demonstrated that this enzyme was able to catalyze the oxidation as well as the evolution of H2. T. celer hydrogenase had an apparent MW of 155,000+/-30,000 by gel filtration. When analyzed by SDS polyacrylamide gel electrophoresis a single band of 41,000+/-2,000 was detected. Hydrogenase activity was also detected in situ in a SDS polyacrylamide gel followed by an activity staining procedure revealing a single band corresponding to a protein of apparent Mr 84,000+/-3,000. Measurements of iron and acid-labile sulfide in different preparations of T. celer hydrogenase gave values ranging from 24 to 30 g-atoms Fe/mole of protein and 24 to 36 g-atoms of acid-labile sulfide per mole of protein. Nickel is present in 1.9-2.3 atoms per mole of protein. Copper, tungsten, and molybdenum were detected in amounts lower than 0.5 g-atoms per mole of protein. T. celer hydrogenase was inactive at ambient temperature, exhibited a dramatic increase in activity above 70 degrees C, and had an optimal activity above 90 degrees C. This enzyme showed no loss of activity after incubation at 80 degrees C for 28 h, but lost 50% of its initial activity after incubation at 96 degrees C for 20 h. Hydrogenase exhibited a half-life of approximately 25 min in air. However, after treating the air-exposed sample with sodium dithionite, more than 95% of the original activity was recovered. Copper sulfate, magnesium chloride and nitrite were also inactivators of this enzyme.

A variable-temperature direct electrochemical study of metalloproteins from hyperthermophilic microorganisms involved in hydrogen production from pyruvate.

The hyperthermophilic bacterium Thermotoga maritima and the hyperthermophilic archaeon Pyrococcus furiosus grow optimally at 80 and 100 degrees C, respectively, by the fermentation of carbohydrates to organic acids, CO2, and H2. Pyruvate is a major source of reductant for H2 production during fermentation, and pyruvate ferredoxin oxidoreductase (POR), a 4Fe-type ferredoxin, and hydrogenase have been previously purified from both species. P. furiosus utilizes a copper-iron-containing POR and a nickel-iron-containing hydrogenase, whereas the POR of T. maritima lacks copper and its hydrogenase lacks nickel. For all four enzymes and for the two ferredoxins, we have determined their reduction potentials (E degrees') and, where possible, thermodynamic parameters associated with electron transfer (delta S degrees and delta H degrees), using differential pulse voltammetry at temperatures ranging from 25 to 95 degrees C. At ambient temperature, the E degrees' values for all six proteins were comparable and spanned less than 50 mV, but their temperature dependence varied dramatically, even between analogous proteins, such that in the physiological-relevant temperature range the E degrees' values became widely separated. In most cases, transition points were observed in E degrees'/temperature profiles, and these generally corresponded with significant increases in catalytic activity, but occurred at lower temperatures in T. maritima than in P. furiosus. The two ferredoxins (and also P. furiosus rubredoxin) had much more negative entropy terms than were calculated for POR and hydrogenase, and these values were also more negative than those previously reported for mesophilic redox proteins. The reduction potentials measured at high temperatures and likely efficiencies of electron transfer between the various proteins were consistent with in vitro activity measurements.(ABSTRACT TRUNCATED AT 250 WORDS)

Properties of a thermostable 4Fe-ferredoxin from the hyperthermophilic bacterium Thermotoga maritima.

A ferredoxin has been purified from one of the most ancient and most thermophilic bacteria known, Thermotoga maritima, which grows up to 90 degrees C. The reduced protein (M(r) approx. 6300) contains a single S = 1/2 [4Fe-4S]1+ cluster with complete cysteinyl ligation, and was unaffected after incubation at 95 degrees C for 12 h. It functioned as an electron carrier for T. maritima pyruvate oxidoreductase. Remarkably, the properties and amino acid sequence of this hyperthermophilic bacterial protein are much more similar to those of ferredoxins from hyperthermophilic archaea, rather than ferredoxins from mesophilic and moderately thermophilic bacteria.

Cloning, expression, and molecular characterization of the gene encoding an extremely thermostable [4Fe-4S] ferredoxin from the hyperthermophilic archaeon Pyrococcus furiosus.

The gene for ferredoxin from the hyperthermophilic archaeon Pyrococcus furiosus was cloned, sequenced, and expressed in Escherichia coli. The coding region confirmed the determined amino acid sequence. Putative archaeon-type transcriptional regulatory elements were identified. The fdxA gene appears to be an independent transcriptional unit. Recombinant ferredoxin was indistinguishable from the protein purified from P. furiosus in its thermal stability and in the potentiometric and spectroscopic properties of its [4Fe-4S] cluster.

Pyruvate ferredoxin oxidoreductases of the hyperthermophilic archaeon, Pyrococcus furiosus, and the hyperthermophilic bacterium, Thermotoga maritima, have different catalytic mechanisms.

Pyruvate ferredoxin oxidoreductase (POR) has been previously purified from two hyperthermophiles, the archaeon Pyrococcus furiosus (Pf, Topt = 100 degrees C) and the bacterium Thermotoga maritima (Tm, Topt = 80 degrees C). Each catalyzes the oxidative decarboxylation of pyruvate to acetyl-CoA and CO2 near the optimal growth temperature of the organism and are virtually inactive at 25 degrees C. Both PORs contain a thiamine pyrophosphate (TPP) cofactor and at least two [4Fe-4S] ferredoxin-type clusters. We have now shown, using EPR spectroscopy and metal analyses, that PfPOR also contains an unusual copper center that is not present in Tm POR. In addition, distinct catalytic intermediates were generated in both enzymes by the addition, separately and in combination, of the substrates pyruvate and CoASH, and these were examined by EPR spectroscopy. The addition of pyruvate to oxidized Pf POR produced an isotropic signal centered at g = 2.01, which was measurably broader in the presence of pyruvate-2(13)C. This signal, which was assigned to a (hydroxyethyl)thiamine pyrophosphate radical intermediate, was not observed in Tm POR under the same experimental conditions. Incubation of the oxidized enzymes with CoASH resulted in the partial reduction of the copper site in Pf POR and the partial reduction of a novel iron-sulfur center in Tm POR, which was not seen in the dithionite-reduced enzyme. The addition of both pyruvate and CoASH to the PORs in their oxidized states resulted in the reduction of the same iron-sulfur centers that are reduced by sodium dithionite.(ABSTRACT TRUNCATED AT 250 WORDS)

Characterization of an ancestral type of pyruvate ferredoxin oxidoreductase from the hyperthermophilic bacterium, Thermotoga maritima.

The hyperthermophilic bacterium, Thermotoga maritima, is a strict anaerobe that grows up to 90 degrees C by carbohydrate fermentation. We report here on its pyruvate ferredoxin oxidoreductase (POR), the enzyme that catalyzes the oxidation of pyruvate to acetyl-CoA, the terminal oxidation step in the conversion of glucose to acetate. T. maritima POR was purified to electrophoretic homogeneity under strictly anaerobic conditions. It has a molecular weight of 113,000 and comprises four dissimilar subunits with M(r) values of approximately 43,000, 34,000, 23,000, and 13,000. It contains thiamine pyrophosphate (TPP) and at least two ferredoxin-type [4Fe-4S] clusters per molecule, as determined by iron analysis and EPR spectroscopy. CoASH was absolutely required for pyruvate oxidation activity, while the addition of TPP was stimulatory. The apparent Km values at 80 degrees C for pyruvate, CoASH, and TPP were 14.5, 0.34, and 0.043 mM, respectively, and the corresponding apparent Vm values ranged from 154 to 170 mumol of pyruvate oxidized/min/mg (units/mg). The apparent Km and Vm values for T. maritima ferredoxin, the proposed physiological electron carrier for POR, were 26 microM and 280 units/mg, respectively. POR did not use 2-oxoglutarate, phenyl pyruvate, or indolyl pyruvate as substrates. The enzyme was extremely thermostable: the temperature optimum for pyruvate oxidation was above 90 degrees C, and the time for a 50% loss of activity (t50%) at 80 degrees C (under anaerobic conditions) was 15 h. The enzyme was also very sensitive to inactivation by oxygen, with a t50% in air at 25 degrees C of 70 min.(ABSTRACT TRUNCATED AT 250 WORDS)

Purification and characterization of pyruvate ferredoxin oxidoreductase from the hyperthermophilic archaeon Pyrococcus furiosus.

Pyrococcus furiosus grows optimally at 100 degrees C by carbohydrate fermentation. It is thought to contain a novel tungsten-dependent, NAD(P)-independent glycolytic pathway in which one of the oxidation steps is catalyzed by a tungsten-containing aldehyde ferredoxin oxidoreductase. The enzyme that catalyzes the terminal oxidation step, pyruvate ferredoxin oxidoreductase (POR), has now been purified. POR has a molecular mass of 100 kDa and is comprised of three subunits (45, 31 and 24 kDa). It lacks tungsten but contains thiamine pyrophosphate (TPP) and two ferredoxin-type [4Fe-4S] clusters per molecule which, by EPR spectroscopy, can be differentiated by their relaxation properties. The enzyme requires CoASH but not TPP for pyruvate oxidation activity and will not use 2-oxoglutarate, phenyl pyruvate or indole pyruvate as substrates. POR is virtually inactive at 25 degrees C and shows a temperature optimum for pyruvate oxidation above 90 degrees C. The apparent Km values for pyruvate, CoASH and P. furiosus ferredoxin at 80 degrees C are 460, 100 and 70 microM, respectively. Carbon monoxide was a potent inhibitor of pyruvate oxidation (apparent Ki = 7 microM). The half-life of activity (t50%) in air at 25 degrees C was 15 min and the t50% value at 80 degrees C (under anaerobic conditions) was 23 min. Based on molecular comparisons with PORs from mesophilic organisms, it is proposed that P. furiosus POR may represent an ancestral form of a pyruvate-oxidizing enzyme.