Secondary sugar binding site identified for LecA lectin from Pseudomonas aeruginosa.

The galactose-specific lectin LecA from Pseudomonas aeruginosa is a target for the development of new anti-infectious compounds. Sugar based molecules with anti-adhesive properties present great potential in the fight against bacterial infection and biofilm formation. LecA is specific for oligosaccharides with terminal α-galactoside residues and displays strong affinity for melibiose (αGal1-6Glc) with a Kd of 38.8 µM. The crystal structure of LecA/melibiose complex shows classical calcium-bridged binding of αGal in the primary binding site but also revealed a secondary sugar binding site with glucose bound. This sugar binding site is in close proximity to the galactose binding one, is independent of calcium and mainly involves interactions with a symmetry-related protein. This discovery would help to the design of new potent inhibitors targeting both binding sites.

Aromatic thioglycoside inhibitors against the virulence factor LecA from Pseudomonas aeruginosa.

Three small families of hydrolytically stable thioaryl glycosides were prepared as inhibitors of the LecA (PA-IL) virulence factor corresponding to the carbohydrate binding lectin from the bacterial pathogen Pseudomonas aeruginosa. The monosaccharidic arylthio ß-d-galactopyranosides served as a common template for the major series that was also substituted at the O-3 position. Arylthio disaccharides from lactose and from melibiose constituted the other two series members. In spite of the fact that the natural ligand for LecA is a glycolipid of the globotriaosylceramide having an α-d-galactopyranoside epitope, this study illustrated that the ß-d-galactopyranoside configuration having a hydrophobic aglycon could override the requirement toward the anomeric configuration of the natural sugar. The enzyme linked lectin assay together with isothermal titration microcalorimetry established that naphthyl 1-thio-ß-d-galactopyranoside () gave the best inhibition with an IC50 twenty-three times better than that of the reference methyl α-d-galactopyranoside. In addition it showed a KD of 6.3 µM which was ten times better than that of the reference compound. The X-ray crystal structure of LecA with was also obtained.

Combining glycomimetic and multivalent strategies toward designing potent bacterial lectin inhibitors.

As part of ongoing activities toward the design of potent and selective ligands against galactoside-binding proteins from animal, bacterial, and plant lectins, a systematic investigation involving the synthesis and binding evaluations of a series of original ß-C-galactopyranoside mimetics is described. The multivalent presentation of partly optimized candidates on various dendritic scaffolds through Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAc) has also been achieved. Biophysical investigations based on isothermal titration calorimetry (ITC) have indicated a dissociation constant in the low micromolar range for the best optimized monovalent conjugate (K(d)=37 µM). The results thus confirmed that stable C-galactosides could represent efficient synthetic glycomimetics of natural α-linked oligosaccharidic inhibitors of PA-IL lectin (Lec A) from the pathogenic Pseudomonas aeruginosa. Striking enhancements in the avidity of the glycoconjugates were also observed for tri-, hexa-, and nonavalent derivatives, among which the most potent exhibited dissociation constants below 500 nM, corresponding to a 400-fold increase in affinity compared with the ß-D-Gal-O-Me used as reference. To deepen our understanding of the binding mode of the best glycomimetics involved in the recognition process, molecular modeling studies, docking calculations, and NMR diffusion measurements have been performed. Although favorable complementary interactions induced by the addition of the hydrophobic aglycon might explain the affinity enhancement, experimental determination of the size and the topology of the multivalent conjugates further supported the formation of aggregative complexes as a major multivalent binding mode. This work represents a systematic and comprehensive study towards a thorough understanding of the protein-carbohydrate interactions involved in Pseudomonas aeruginosa infection, and as such should prove useful for the development of stable and optimized anti-adhesive agents.

Enhancement of plant and bacterial lectin binding affinities by three-dimensional organized cluster glycosides constructed on helical poly(phenylacetylene) backbones.

A series of poly(phenylacetylene)s bearing diverse saccharide pendants--N-acetyl-D-glucosamine, D-lactose, and N-acetyl-D-neuraminic acid--were synthesized by rhodium-mediated polymerizations of the corresponding acetyl-protected glycosylated phenylacetylenes followed by deprotection. The circular dichroism spectra of these glycosylated poly(phenylacetylene)s each displayed split-type Cotton effects in the long absorption region of the conjugated polymer backbone (260-500 nm), thus indicating predominantly one-handed helical conformations in their backbones. The binding affinities of these glycosylated poly(phenylacetylene)s, and those of previously reported phenylacetylenes bearing D-galactose, towards plant and bacterial lectins were investigated by hemagglutination inhibition assay and isothermal titration calorimetry (ITC). The stoichiometries of binding vary strongly, depending on the lectin binding sites and the accessibilities of the carbohydrate residues in the helices. The measured affinities also vary, with the maximum value observed for the interaction between poly-PA-α-Gal and lectin I from Pseudomonas aeruginosa, with a K(d) value of 4 µM per monosaccharide representing a 200-fold increase relative to the corresponding monomer.

Role of water molecules in structure and energetics of Pseudomonas aeruginosa lectin I interacting with disaccharides.

Calcium-dependent lectin I from Pseudomonas aeruginosa (PA-IL) binds specifically to oligosaccharides presenting an alpha-galactose residue at their nonreducing end, such as the disaccharides alphaGal1-2betaGalOMe, alphaGal1-3betaGalOMe, and alphaGal1-4betaGalOMe. This provides a unique model for studying the effect of the glycosidic linkage of the ligands on structure and thermodynamics of the complexes by means of experimental and theoretical tools. The structural features of PA-IL in complex with the three disaccharides were established by docking and molecular dynamics simulations and compared with those observed in available crystal structures, including PA-IL.alphaGal1-2betaGalOMe complex, which was solved at 2.4 A resolution and reported herein. The role of a structural bridge water molecule in the binding site of PA-IL was also elucidated through molecular dynamics simulations and free energy calculations. This water molecule establishes three very stable hydrogen bonds with O6 of nonreducing galactose, oxygen from Pro-51 main chain, and nitrogen from Gln-53 main chain of the lectin binding site. Binding free energies for PA-IL in complex with the three disaccharides were investigated, and the results were compared with the experimental data determined by titration microcalorimetry. When the bridge water molecule was included in the free energy calculations, the simulations predicted the correct binding affinity trends with the 1-2-linked disaccharide presenting three times stronger affinity ligand than the other two. These results highlight the role of the water molecule in the binding site of PA-IL and indicate that it should be taken into account when designing glycoderivatives active against P. aeruginosa adhesion.

Achieving high affinity towards a bacterial lectin through multivalent topological isomers of calix[4]arene glycoconjugates.

A family of seven topologically isomeric calix[4]arene glycoconjugates was prepared through the synthesis of a series of alkyne-derivatised calix[4]arene precursors that are suitable for the attachment of sugar moieties by microwave-assisted copper(I)-catalysed azide-alkyne cycloaddition (CuAAC). The glycoconjugates thus synthesised comprised one mono-functionalised derivative, two 1,2- or 1,3-divalent regioisomers, one trivalent and three tetravalent topoisomers in the cone, partial cone or 1,3-alternate conformations. The designed glycoconjugates were evaluated as ligands for the galactose-binding lectin PA-IL from the opportunistic bacterium Pseudomonas aeruginosa, a major causative agent of lung infections in cystic fibrosis patients. Binding affinities were determined by isothermal titration calorimetry (ITC), and the interaction with the lectin was shown to be strongly dependant on both the valence and the topology. Whereas the trivalent conjugate displayed enhanced affinity when compared to a monosaccharide model, the tetravalent conjugates are to-date the highest-affinity ligands measured by ITC. The topologies presenting carbohydrates on both faces of calixarene are the most potent ones with dissociation constants of approximately 200 nM. Molecular modelling suggests that such a multivalent molecule can efficiently chelate two of the binding sites of the tetrameric lectin; this explains the 800-fold increase of affinity achieved by the tetravalent molecule. Surface plasmon resonance (SPR) experiments confirmed that this glycoconjugate is the strongest inhibitor for binding of PA-IL to galactosylated surfaces for potential applications as an anti-adhesive agent.

Interplay of RNA Pol IV and ROS1 during post-embryonic 5S rDNA chromatin remodeling.

We have investigated the chromatin structure of 5S rDNA, a heterochromatic pericentromeric tandemly repeated family, at 2, 3, 4 and 5 days post-germination. Our results revealed a large-scale reorganization of 5S rDNA chromatin that occurs during the first days of development. Unexpectedly, there is a decondensation followed by a 're'condensation of 5S rDNA chromatin, to obtain almost mature nuclei 5 d post-germination. The reorganization of 5S rDNA chromatin is accompanied by a rapid and active demethylation of 5S rDNA mediated by the ROS1 (repressor of silencing 1) demethylase, whereas the plant-specific RNA polymerase IV (Pol IV) is essential to the 5S chromatin 're'condensation. In conclusion, Pol IV and ROS1 collaborate to unlock the 5S rDNA chromatin inherited from the seed, and establish adult features.

Structural basis of the preferential binding for globo-series glycosphingolipids displayed by Pseudomonas aeruginosa lectin I.

The opportunistic pathogen Pseudomonas aeruginosa contains several carbohydrate-binding proteins, among which is the P. aeruginosa lectin I (PA-IL), which displays affinity for alpha-galactosylated glycans. Glycan arrays were screened and demonstrated stronger binding of PA-IL toward alphaGal1-4betaGal-terminating structures and weaker binding to alphaGal1-3betaGal ones in order to determine which human glycoconjugates could play a role in the carbohydrate-mediated adhesion of the bacteria. This was confirmed in vivo by testing the binding of the lectin to Burkitt lymphoma cells that present large amounts of globotriaosylceramide antigen Gb3/CD77/P(k). Trisaccharide moieties of Gb3 (alphaGal1-4betaGal1-4Glc) and isoglobotriaosylceramide (alphaGal1-3betaGal1-4Glc) were tested by titration microcalorimetry, and both displayed similar affinity to PA-IL in solution. The crystal structure of PA-IL complexed to alphaGal1-3betaGal1-4Glc trisaccharide has been solved at 1.9-A resolution and revealed how the second galactose residue makes specific contacts with the protein surface. Molecular modeling studies were performed in order to compare the binding mode of PA-IL toward alphaGal1-3Gal with that toward alphaGal1-4Gal. Docking studies demonstrated that alphaGal1-4Gal creates another network of contacts for achieving a very similar affinity, and 10-ns molecular dynamics in explicit water allowed for analyzing the flexibility of each disaccharide ligand in the protein binding site. The higher affinity observed for binding to Gb3 epitope, both in vivo and on glycan array, is likely related to the presentation effect of the oligosaccharide on a surface, since only the Gb3 glycosphingolipid geometry is fully compatible with parallel insertion of neighboring trisaccharide heads in two binding sites of the same tetramer of PA-IL.

Functioning of the dimeric GABA(B) receptor extracellular domain revealed by glycan wedge scanning.

The G-protein-coupled receptor (GPCR) activated by the neurotransmitter GABA is made up of two subunits, GABA(B1) and GABA(B2). GABA(B1) binds agonists, whereas GABA(B2) is required for trafficking GABA(B1) to the cell surface, increasing agonist affinity to GABA(B1), and activating associated G proteins. These subunits each comprise two domains, a Venus flytrap domain (VFT) and a heptahelical transmembrane domain (7TM). How agonist binding to the GABA(B1) VFT leads to GABA(B2) 7TM activation remains unknown. Here, we used a glycan wedge scanning approach to investigate how the GABA(B) VFT dimer controls receptor activity. We first identified the dimerization interface using a bioinformatics approach and then showed that introducing an N-glycan at this interface prevents the association of the two subunits and abolishes all activities of GABA(B2), including agonist activation of the G protein. We also identified a second region in the VFT where insertion of an N-glycan does not prevent dimerization, but blocks agonist activation of the receptor. These data provide new insight into the function of this prototypical GPCR and demonstrate that a change in the dimerization interface is required for receptor activation.

A semi-automated method using interpolation and optimisation for the 3D reconstruction of the spine from bi-planar radiography: a precision and accuracy study.

The 3D reconstruction of the spine in upright posture can be obtained by bi-planar radiographic methods, developed since the 1970s. The principle is to identify 4-25 anatomical landmarks per vertebrae and per images. This identification time is hardly manageable in clinical practice. A semi-automated method is used: 3D standard vertebral models are positioned along with a 3D curve (identified all the way through the vertebral bodies). The silhouettes of the models of C7 and L5 vertebrae are first adjusted and the positions of the other vertebrae are interpolated and optimised. The inter- and intra-operator variabilities and the errors between the semi-automated method and the manual identification of six anatomical landmarks per vertebra are evaluated on 20 pairs of X-ray images of subjects with different spinal deformities. The identification time for the semi-automated method is 5 min. For scolitic subjects, the precision is under 2.2 degrees and the accuracy is under 3.2 degrees for all lateral, sagittal and axial rotations.