Optimization of Nanohybrid Biosensors Based on Electro-Crosslinked Tannic Acid Capped Nanoparticles/Enzyme.

Enzymes/Nanoparticles (NPs) bioconjugates are massively used nowadays to develop thin films for optical and electrochemical biosensors. Nevertheless, their full characterization as a thin coating onto electrodes remains little discussed, in particular the influence of NPs size and enzyme/NPs ratio used in the electrodeposition solution. In this study, GOx (160 kDa) and HRP (44 kDa) were used in association with tannic acid capped gold NPs (a series with sizes from 7 to 40 nm) to electrodeposit biosensor coatings, sensitive towards glucose and H2O2, respectively. The electrodeposition process was based on a mussel-inspired electro-crosslinking between gallol moieties of tannic acid (at the surface of NPs) and amine moieties of the enzymes. On one hand, the sensitivity of the GOx/NPs coatings depends strongly on the NP size and the enzyme/NPs molar ratio of the electrodeposition solution. An optimal sensitivity was obtained by electrodeposition of 11 nm NPs at a GOx/NPs molar ratio close to the theoretical value of the enzyme monolayer. On the other hand, a modest influence of the NPs size was found on the sensitivity in the case of the electrodeposited HRP/NPs coatings, reaching a plateau at the HRP/NPs molar ratio close to the value of the theoretical enzyme monolayer. In both cases, the enzyme/NPs molar ratio played a role in the sensitivity. To fully understand the parameters driving the biosensor sensitivity, a comprehensive evaluation of the colloidal state of the bioconjugates is proposed here.

Autonomous Growth of a Spatially Localized Supramolecular Hydrogel with Autocatalytic Ability.

Autocatalysis and self-assembly are key processes in developmental biology and are involved in the emergence of life. In the last decade both of these features were extensively investigated by chemists with the final goal to design synthetic living systems. Herein, we describe the autonomous growth of a self-assembled soft material, that is, a supramolecular hydrogel, able to sustain its own formation through an autocatalytic mechanism that is not based on any template effect and emerges from a peptide (hydrogelator) self-assembly. A domino sequence of events starts from an enzymatically triggered peptide generation followed by self-assembly into catalytic nanofibers that induce and amplify their production over time, resulting in a 3D hydrogel network. A cascade is initiated by traces (10-18 m) of a trigger enzyme, which can be localized allowing for a spatial resolution of this autocatalytic buildup of hydrogel growth, an essential condition on the route towards further cell-mimic designs.

Supported Catalytically Active Supramolecular Hydrogels for Continuous Flow Chemistry.

Inspired by biology, one current goal in supramolecular chemistry is to control the emergence of new functionalities arising from the self-assembly of molecules. In particular, some peptides can self-assemble and generate exceptionally catalytically active fibrous networks able to underpin hydrogels. Unfortunately, the mechanical fragility of these materials is incompatible with process developments, relaying this exciting field to academic curiosity. Here, we show that this drawback can be circumvented by enzyme-assisted self-assembly of peptides initiated at the walls of a supporting porous material. We applied this strategy to grow an esterase-like catalytically active supramolecular hydrogel (CASH) in an open-cell polymer foam, filling the whole interior space. Our supported CASH material is highly efficient towards inactivated esters and enables the kinetic resolution of racemates. This hybrid material is robust enough to be used in continuous flow reactors, and is reusable and stable over months.

Phase Separation in Supramolecular Hydrogels Based on Peptide Self-Assembly from Enzyme-Coated Nanoparticles.

Spatial localization of biocatalysts, such as enzymes, has recently proven to be an effective process to direct supramolecular self-assemblies in a spatiotemporal way. In this work, silica nanoparticles (NPs) functionalized covalently by alkaline phosphatase (NPs@AP) induce the localized growth of self-assembled peptide nanofibers from NPs by dephosphorylation of Fmoc-FFpY peptides (Fmoc: fluorenylmethyloxycarbonyl; F: phenylalanine; Y: tyrosine; p: phosphate group). The fibrillary nanoarchitecture around NPs@AP underpins a homogeneous hydrogel, which unexpectedly undergoes a macroscopic shape change over time. This macroscopic change is due to a phase separation leading to a dense phase (in NPs and nanofibers) in the center of the vial and surrounded by a dilute one, which still contains NPs and peptide self-assemblies. We thus hypothesize that the phase separation is not a syneresis process. Such a change is only observed when the enzymes are localized on the NPs. The dense phase contracts with time until reaching a constant volume after several days. For a given phosphorylated peptide concentration, the dense phase contracts faster when the NPs@AP concentration is increased. For a given NPs@AP concentration, it condenses faster when the peptide concentration increases. We hypothesize that the appearance of a dense phase is not only due to attractive interactions between NPs@AP but also to the strong interactions of self-assembled peptide nanofibers with the enzymes, covalently fixed on the NPs.

Protein-induced low molecular weight hydrogelator self-assembly through a self-sustaining process.

Controlling how, when and where a self-assembly process occurs is essential for the design of the next generation of smart materials. Along this route, enzyme-assisted self-assembly is a powerful tool developed during the last decade. Here we introduce another strategy allowing for spatiotemporal control over peptide self-assemblies. We use a Fmoc-peptide precursor in dynamic equilibrium with its low molecular weight hydrogelator (LMWH) through a reversible disulfide bond. In the absence of proteins, no self-assembly of the hydrogelator is observed. In the presence of proteins, their interactions with the precursor initiate a self-assembly process of the hydrogelator around them. This self-assembly displaces the equilibrium between precursor and LMWH according to Le Chatelier's principle, producing new hydrogelators available to pursue the self-assembly growth. One thus establishes a self-sustaining cycle fuelled by the self-assembly itself until full consumption of the LMWH. For proteins in solutions this process can lead to a supramolecular hydrogel whereas for proteins deposited on a surface, the gel growth is initiated exclusively from the surface.

Design of Highly Stable Echogenic Microbubbles through Controlled Assembly of Their Hydrophobin Shell.

Dispersing hydrophobin HFBII under air saturated with perfluorohexane gas limits HFBII aggregation to nanometer-sizes. Critical basic findings include an unusual co-adsorption effect caused by the fluorocarbon gas, a strong acceleration of HFBII adsorption at the air/water interface, the incorporation of perfluorohexane into the interfacial film, the suppression of the fluid-to-solid 2D phase transition exhibited by HFBII monolayers under air, and a drastic change in film elasticity of both Gibbs and Langmuir films. As a result, perfluorohexane allows the formation of homogenous populations of spherical, narrowly dispersed, exceptionally stable, and echogenic microbubbles.

Effect of the alkyl chain length of secondary amines on the phase transfer of gold nanoparticles from water to toluene.

In the present paper we describe a phase transfer of aqueous synthesized gold nanoparticles (AuNPs) from water to toluene using secondary amines: dioctylamine, didodecylamine, and dioctadecylamine. The effect of the hydrocarbon chain length and amount of amines on the transfer efficiency were investigated in the case of nanoparticles (NPs) with three different sizes: 5, 9, and 13 nm. Aqueous colloids were precisely characterized before the transfer process using UV-vis spectroscopy, dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and transmission electron microscopy (TEM). Nanoparticles were next transferred to toluene and characterized using UV-vis and DLS techniques. It was found that dioctadecylamine provides the most effective transfer of nanoparticles. No time-dependent changes in the NP size were observed after 12 days, showing that the dioctadecylamine-stabilized nanoparticles dispersed in toluene were stable. This indicates that long hydrocarbon chains of dioctadecylamine exhibit sufficiently hydrophobic properties of nanoparticles and consequently their good dispersibility in nonpolar solvent.

In situ formation of silver nanoparticles in linear and branched polyelectrolyte matrices using various reducing agents.

Silver nanoparticles were synthesized in linear and branched polyelectrolyte matrices using different reductants and distinct synthesis conditions. The effect of the host hydrolyzed linear polyacrylamide and star-like copolymers dextran-graft-polyacrylamide of various compactness, the nature of the reductant, and temperature were studied on in situ synthesis of silver sols. The related nanosystems were analyzed by high-resolution transmission electron microscopy and UV-vis absorption spectrophotometry. It was established that the internal structure of the polymer matrix as well as the nature of the reductant determines the process of the silver nanoparticle formation. Specifically, the branched polymer matrices were much more efficient than the linear ones for stable nanosystem preparation.

Direct Electrochemistry of Cytochrome bo Oxidase at a series of Gold Nanoparticles-Modified Electrodes.

New membrane-protein based electrodes were prepared incorporating cytochrome bo(3) from E. coli and gold nanoparticles. Direct electron transfer between the electrode and the immobilized enzymes was achieved, resulting in an electrocatalytic activity in presence of O(2). The size of the gold nanoparticles was shown to be important and smaller particles were shown to reduce the overpotential of the process.

Size-selective 2D ordering of gold nanoparticles using surface topography of self-assembled diamide template.

Size-selective organization of ~2 nm dodecanethiol stabilized gold nanoparticles (AuNPs) into periodic 1D arrays by using the surface topographical features of a soft template is described. The template consists of micrometer length nanotapes organized into nanosheets with periodic valleys running along their length and is generated by the hierarchical self-assembly of a diamide molecule (BHPB) in cyclohexane. The AuNP ordering achieved simply by mixing the preformed template with the readily available ~2 nm dodecanethiol stabilized AuNPs is comparable to those obtained using programmable DNA and functional block copolymers. The observed periodicity of the AuNP arrays provided valuable structural clues about the organization of nanotapes into nanosheets. Self-assembling BHPB molecules in the presence of AuNPs by heating and cooling the two components led to a comparatively disordered organization because the template structure was changed under these conditions. Moreover, the template could not order larger AuNPs (~5 nm) into a similar 1D array, owing to the steric restriction imposed by the dimension of the valleys on the template. Interestingly, this geometric constraint led to AuNP size sorting when a polydisperse sample (2.5 ± 0.9 nm) was used for organization, with AuNPs attached to the template edges being larger (≥2.2 ± 0.9 nm) than those associated to the inner valleys (1.6 ± 0.8 nm). This is a unique example of size-sorting induced by the surface topographical features of a soft template.

Slow complexation dynamics between linear short polyphosphates and polyallylamines: analogies with "layer-by-layer" deposits.

Polyelectrolyte "complexes" have been studied for almost a century and find more and more applications in cosmetics and DNA transfection. Most of the available studies focused on the thermodynamic aspects of the "complex" formation, mainly to determine phase diagrams and the influence of diverse physicochemical aspects on the formation of "complexes", but conversely less effort has been given to the kinetics of such processes. We describe herein the "complexation" kinetics of a short linear sodium polyphosphate (PSP) with poly(allylamine hydrochloride) (PAH) in the presence of 10 mM, 0.15 M and 1 M NaCl. We find, by using a combination of physicochemical techniques, that mixtures containing a 1 to 1 molar ratio of phosphate and amino groups allow the formation of "complexes" having a few 100 nm in diameter which progressively grow to particles up to 1.5 microns in hydrodynamic diameter, the growth process being accompanied by some progressive sedimentation. During this slow aggregation kinetics, the polyelectrolytes undergo a release of counterions and the zeta potential changes from a positive value to a negative one of -20 mV which is close to the zeta potential of (PSP-PAH)(n) films deposited under identical physicochemical conditions. Even though the complexes have a negative electrophoretic mobility, they contain an equimolar amount of amino and phosphate groups. This allows us to make some assumption about the structure of such "complexes" and to compare them with other published structures. We will also compare them with the aggregates found during the "layer-by-layer" deposition of the same species under the same conditions.

Electrochemistry of cytochrome c1, cytochrome c552, and CuA from the respiratory chain of Thermus thermophilus immobilized on gold nanoparticles.

The electrochemical behavior of three proteins fragments from the respiratory chain of the extremophilic bacterium Thermus thermophilus , namely, cytochrome c(1) (Cyt-c(1)), cytochrome c(552) (Cyt-c(552)), and Cu(A), immobilized on three-dimensional gold nanoparticles electrodes was investigated by cyclic voltammetry. The gold nanoparticles were modified by either dithiobissuccinimidyl propionate (DTSP) or a mixed self-assembled monolayer of 6-mercaptohexan-1-ol and hexanethiol, depending on the surface of the protein. High surface coverages with enzymes and good electron transfer rates were achieved in the case of Cyt-c(1) immobilized on DTSP-modified gold nanoparticles and Cyt-c(552) or Cu(A) immobilized on mixed SAMs-modified gold nanoparticles. Interestingly, high surface coverages with Cu(A) were also observed on DTSP-modified gold nanoparticles, but a slower electron transfer rate was determined in this case. The gold nanoparticle/protein assemblies were characterized by surface-enhanced IR spectroscopy and transmission electron microscopy.

Hierarchical formation of fibrillar and lamellar self-assemblies from guanosine-based motifs.

Here we investigate the supramolecular polymerizations of two lipophilic guanosine derivatives in chloroform by light scattering technique and TEM experiments. The obtained data reveal the presence of several levels of organization due to the hierarchical self-assembly of the guanosine units in ribbons that in turn aggregate in fibrillar or lamellar soft structures. The elucidation of these structures furnishes an explanation to the physical behaviour of guanosine units which display organogelator properties.