The Structural, Thermal and Morphological Characterization of Polylactic Acid/Β-Tricalcium Phosphate (PLA/Β-TCP) Composites upon Immersion in SBF: A Comprehensive Analysis.

Biocomposite films based on PLA reinforced with different ß-TCP contents (10%, 20%, and 25%wt.) were fabricated via solvent casting and immersed in SBF for 7, 14, and 21 days. The bioactivity, morphological, and thermal behavior of composites with immersion were studied using scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, weight loss (WL), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and gel permeation chromatography (GPC). This broad analysis leads to a deeper understanding of the evolution of the polymer-filler interaction with the degradation of the biocomposites. The results showed that ß-TCP gradually evolved into carbonated hydroxyapatite as the immersion time increased. This evolution affected the interaction of ß-TCP with PLA. PLA and ß-TCP interactions differed from PLA and carbonated hydroxyapatite interactions. It was observed that ß-TCP inhibited PLA hydrolysis but accelerated the thermal degradation of the polymer. ß-TCP retarded the cold crystallization of PLA and hindered its crystallinity. However, after immersion in SBF, particles accelerated the cold crystallization of PLA. Therefore, considering the evolution of ß-TCP with immersion in SBF is crucial for an accurate analysis of the biocomposites' degradation. These findings enhance the comprehension of the degradation mechanism in PLA/ß-TCP, which is valuable for predicting the degradation performance of PLA/ß-TCP in medical applications.

Electrospun Polyvinylpyrrolidone-Based Dressings Containing GO/ZnO Nanocomposites: A Novel Frontier in Antibacterial Wound Care.

In recent years, the rapid emergence of antibiotic-resistant bacteria has become a significant concern in the healthcare field, and although bactericidal dressings loaded with various classes of antibiotics have been used in clinics, in addition to other anti-infective strategies, this alarming issue necessitates the development of innovative strategies to combat bacterial infections and promote wound healing. Electrospinning technology has gained significant attention as a versatile method for fabricating advanced wound dressings with enhanced functionalities. This work is based on the generation of polyvinylpyrrolidone (PVP)-based dressings through electrospinning, using a DomoBIO4A bioprinter, and incorporating graphene oxide (GO)/zinc oxide (ZnO) nanocomposites as a potent antibacterial agent. GO and ZnO nanoparticles offer unique properties, including broad-spectrum antibacterial activity for improved wound healing capabilities. The synthesis process was performed in an inexpensive one-pot reaction, and the nanocomposites were thoroughly characterized using XRD, TEM, EDX, SEM, EDS, and TGA. The antibacterial activity of the dispersions was demonstrated against E. coli and B. subtilis, Gram-negative and Gram-positive bacteria, respectively, using the well diffusion method and the spread plate method. Bactericidal mats were synthesized in a rapid and cost-effective manner, and the fiber-based structure of the electrospun dressings was studied by SEM. Evaluations of their antibacterial efficacy against E. coli and B. subtilis were explored by the disk-diffusion method, revealing an outstanding antibacterial capacity, especially against the Gram-positive strain. Overall, the findings of this research contribute to the development of next-generation wound dressings that effectively combat bacterial infections and pave the way for advanced therapeutic interventions in the field of wound care.

Medical grade 3D printable bioabsorbable PLDL/Mg and PLDL/Zn composites for biomedical applications.

Medical grade PLDL, PLDL/Mg and PLDL/Zn filaments were manufactured by a dual extrusion method and used to prepare coupons and scaffolds with controlled porosity by fused filament fabrication. The mechanical properties, degradation mechanisms and biological performance were carefully analyzed. It was found that the presence of 4 vol.% of Mg and Zn particles did not substantially modify the mechanical properties but accelerated the degradation rate of PLDL. Moreover, the acidification of the pH due to degradation of the PLDL was reduced in the presence of metallic particles. Finally, cell adhesion and proliferation were excellent in the medical grade PLDL as well as in the polymer/metal composites. These results demonstrate the potential of bioabsorbable metal/polymer composites to tailor the mechanical properties, degradation rate and biocompatibility for specific clinical applications.

Interlocking Matrix and Filler for Enhanced Individualization and Reinforcement in Polymer-Single-Walled Carbon Nanotube Composites.

Poor individualization and interfacial adhesion prevent single-walled carbon nanotube (SWNT)-polymer composites from reaching outstanding mechanical properties. With much larger diameters, but common structural features (high aspect ratio and absence of functional groups for covalent or supramolecular attachment with the polymer), carbon fibers face similar problems, which are addressed by covering the fibers with a thin layer of polymer. This sizing strategy has allowed carbon fibers to become the filler of choice for the highest performing materials. Inspired by this, here we investigate the use of the mechanical bond to wrap SWNTs with a layer of polymeric material to produce SWNTs mechanically interlocked with a layer of polymer. We first validate the formation of mechanically interlocked nanotubes (MINTs) using mixtures of SWNTs of relatively large average diameter (1.6 ± 0.4 nm), which are commercially available at reasonable prices and therefore could be technologically relevant as polymer fillers. We then design and synthesize by ring-opening metathesis polymerization (ROMP) a polymer decorated with multiple U-shaped molecules, which are later ring-closed around the SWNTs using metathesis. The obtained hybrids contain a high degree of individualized SWNTs and exhibit significantly increased mechanical properties when compared to the matrix polymer. We envision that this strategy could be employed to produce SWNTs interlocked with polymer layers with various designs for polymer reinforcement.

Mechanical Interlocking to Unlock the Reinforcing Potential of Carbon Nanotubes.

Single-walled carbon nanotubes (SWNTs) present extraordinary mechanical properties, with Youngs' modulus>1 TPa and tensile strength>50 GPa; this makes them ideal candidates as fillers for the reinforcement of polymers. However, the performance of SWNTs in this field has fallen behind expectations. This is due to a combination of imperfect individualization of the SWNTs and poor load transfer from the polymer to the SWNTs. Here, we study the reinforcement of polymers of different chemical nature using mechanically interlocked derivatives of single-walled carbon nanotubes (MINTs). We compare the mechanical properties of fibers made of poly (methyl methacrylate) (PMMA) and polysulfone (PSU) and their composites made with pristine SWNTs, MINTs, and the corresponding supramolecular models. With very low loading of MINTs (0.01 % w/w), improvements of more than 100 % on Youngs Modulus and the tensile strength are observed for both the nonpolar aliphatic PMMA and the very polar aromatic PSU polymers, while pristine carbon nanotubes and the supramolecular nanofillers showed smaller reinforcement. These data, together with our previous report on the reinforcement of polystyrene (nonpolar and aromatic), indicate that derivatization of SWNTs as MINTs is a valid general strategy to optimize the interaction between SWNT fillers and the polymer matrix.

Optimization of the Equine-Sperm Freeze Test in Purebred Spanish Horses by Incorporating Colloidal Centrifugation.

The Purebred Spanish Horse, according to our clinical experience, is characterized by having a high number of stallions that do not meet the international commercial recommendations for equine-sperm cryopreservation. This means that artificial insemination with frozen semen from these stallions is less widespread than in other breeds. In this study, we investigated if the incorporation of single-layer colloidal centrifugation prior to cryopreservation in clinical conditions could increase the number of ejaculates of Purebred Spanish stallions suitable for this processing, observing the influence of centrifugation and freezing extender protocol on post-thawed sperm motility. Using colloidal centrifugation, the percentage of ejaculates available to be frozen was increased from 35% (6/17) to 71% (12/17), doubling the number of samples that could have been subjected to cryopreservation. We only found significant differences in linearity (LIN) and lateral head displacement (ALH) after 5 min of incubation at 37 °C between colloidal and simple centrifugation processing techniques. No significant differences were found between the two different colloidal protocols in any of the variables considered. Colloidal centrifugation allowed us to obtain, from worse fresh-quality ejaculates, thawed sperm doses with similar quality to that of good-quality ejaculates. BotuCrio® produced, in general, higher motility parameters and its characteristics than the other extenders analyzed, with significant differences found in comparison to Inra-Freeze® and Lac-Edta in both total (MOT) and progressive motility (PMOT) when using colloidal centrifugation and only in PMOT when applying simple centrifugation. Colloidal centrifugation optimized the efficiency of cryopreservation, as it allowed us to increase the number of ejaculates of Purebred Spanish Horses suitable to be frozen. Including these semen processing techniques in the freeze test could help to optimize equine-sperm cryopreservation protocols, especially when dealing with individuals or breeds for which initially low sperm quality prevents or limits their inclusion in sperm cryopreservation programs.

Plasma-Derived Fibrin Hydrogels Containing Graphene Oxide for Infections Treatment.

Wound infection is inevitable in most patients suffering from extensive burns or chronic ulcers, and there is an urgent demand for the production of bactericidal dressings to be used as grafts to restore skin functionalities. In this context, the present study explores the fabrication of plasma-derived fibrin hydrogels containing bactericidal hybrids based on graphene oxide (GO). The hydrogels were fully characterized regarding gelation kinetics, mechanical properties, and internal hydrogel structures by disruptive cryo scanning electron microscopies (cryo-SEMs). The gelation kinetic experiments revealed an acceleration of the gel formation when GO was added to the hydrogels in a concentration of up to 0.2 mg/mL. The cryo-SEM studies showed up a decrease of the pore size when GO was added to the network, which agreed with a faster area contraction and a higher compression modulus of the hydrogels that contained GO, pointing out the critical structural role of the nanomaterial. Afterward, to study the bactericidal ability of the gels, GO was used as a carrier, loading streptomycin (STREP) on its surface. The loading content of the drug to form the hybrid (GO/STREP) resulted in 50.2% ± 4.7%, and the presence of the antibiotic was also demonstrated by Raman spectroscopy, Z-potential studies, and thermogravimetric analyses. The fibrin-derived hydrogels containing GO/STREP showed a dose-response behavior according to the bactericidal hybrid concentration and allowed a sustained release of the antibiotic at a programmed rate, leading to drug delivery over a prolonged period of time.

Polyacrylonitrile-b-Polystyrene Block Copolymer-Derived Hierarchical Porous Carbon Materials for Supercapacitor.

The use of block copolymers as a sacrificial template has been demonstrated to be a powerful method for obtaining porous carbons as electrode materials in energy storage devices. In this work, a block copolymer of polystyrene and polyacrylonitrile (PS-b-PAN) has been used as a precursor to produce fibers by electrospinning and powdered carbons, showing high carbon yield (~50%) due to a low sacrificial block content (fPS ≈ 0.16). Both materials have been compared structurally (in addition to comparing their electrochemical behavior). The porous carbon fibers showed superior pore formation capability and exhibited a hierarchical porous structure, with small and large mesopores and a relatively high surface area (~492 m2/g) with a considerable quantity of O/N surface content, which translates into outstanding electrochemical performance with excellent cycle stability (close to 100% capacitance retention after 10,000 cycles) and high capacitance value (254 F/g measured at 1 A/g).

Optimization of Processing Conditions and Mechanical Properties for PEEK/PEI Multilayered Blends.

The goal of producing polyetheretherketone/polyetherimide (PEEK/PEI) blends is to combine the outstanding properties that both polymers present separately. Despite being miscible polymers, it is possible to achieve PEEK/PEI multilayered blends in which PEEK crystallinity is not significantly inhibited, as opposed to conventional extruding processes that lead to homogeneous mixtures with total polymer chain interpenetration. This study investigated a 50/50 (volume fraction) PEEK/PEI multilayered polymer blend in which manufacturing parameters were tailored to simultaneously achieve PEEK-PEI adhesion while keeping PEEK crystallinity in order to optimize the mechanical properties of this heterogeneous polymer blend. The interface adhesion was characterized with the use of three-point bending tests, which proved that a processing temperature below the melting point of PEEK produced weak PEEK-PEI interfaces. Results from differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and X-ray diffraction analysis (XRD) showed that under a 350 °C consolidation temperature, there is a partial mixing of PEEK and PEI layers in the interface that provides good adhesion. The thickness of the mixed homogeneous region at this temperature exhibits reduced sensitivity to processing time, which ensures that both polymers essentially remain separate phases. This also entails that multilayered blends with good mechanical properties can be reliably produced with short manufacturing cycles. The combination of mechanical performance and potential joining capability supports their use in a wide range of applications in the automotive, marine, and aerospace industries.

Effect of Fiber-Matrix Interface on the Mechanical Response of a Woven Carbon Fiber/PEEK Composite Material.

This work studies the relationship between the interface shear strength (IFSS) and the mechanical response of a carbon fiber-reinforced composite with a polyether-ether-ketone (PEEK) thermoplastic matrix. Two types of laminates were studied: the first kind was manufactured with as-received fiber fabrics, while specimens belonging to the second one were fabricated with thermally treated fibers where the original sizing agent was removed. IFSS values were measured with the push-in test, showing that treated fibers exhibit a 25% higher critical shear stress. Microscopic inspection of the laminates revealed that untreated specimens were prone to debonding, generating a much higher crack density. This difference was detected by the C-Scan technique and triggered in the response of both laminates under tensile tests at ±45∘ fiber orientation, where maximum stress and strain at break values of desized specimens showed an increase of 37% and 190%, respectively. Results confirmed that the original fiber sizing weakened the fiber-matrix interface. Lastly, the tensile response of the composite is analyzed in light of interface quality.

An ultrasensitive molecularly imprinted polymer-based electrochemical sensor for the determination of SARS-CoV-2-RBD by using macroporous gold screen-printed electrode.

Herein, a novel molecularly imprinted polymer (MIP) based electrochemical sensor for the determination of the receptor-binding domain of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2-RBD) has been developed. For this purpose, first, a macroporous gold screen-printed electrode (MP-Au-SPE) has been fabricated. The MIP was then synthesized on the surface of the MP-Au-SPE through the electro-polymerization of ortho-phenylenediamine in the presence of SARS-CoV-2-RBD molecules as matrix polymer, and template molecules, respectively. During the fabrication process, the SARS-CoV-2-RBD molecules were embedded in the polymer matrix. Subsequently, the template molecules were removed from the electrode by using alkaline ethanol. The template molecules removal was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and attenuated total reflectance spectroscopy (ATR). The fabricated MIP film acted as an artificial recognition element for the measurement of SARS-CoV-2-RBD. The EIS technique was used for the measurement of the SARS-CoV-2-RBD in the saliva solution. The electron transfer resistance (Ret) of the MIP-based sensor in a ferri/ferrocyanide solution increased as the SARS-CoV-2-RBD concentration increased due to the occupation of the imprinted cavities by the SARS-CoV-2-RBD. The MIP-based sensor exhibited a good response to the SARS-CoV-2-RBD in the concentration range between 2.0 and 40.0 pg mL-1 with a limit of detection of 0.7 pg mL-1. The obtained results showed that the fabricated MIP sensor has high selectivity sensitivity, and stability.

The lack of Irs2 induces changes in the immunocytochemical expression of aromatase in the mouse retina.

Insulin receptor substrate (Irs) belongs to a family of proteins that mediate the intracellular signaling of insulin and IGF-1. Insulin receptor substrate 2 (Irs2) is necessary for retinal function, since its failure in Irs2-deficient mice in hyperglycemic situation promotes photoreceptor degeneration and visual dysfunction, like in diabetic retinopathy. The expression of P450 aromatase, which catalyzes androgen aromatization to form 17ß-estradiol, increases in some neurodegenerative diseases thus promoting the local synthesis of neuroestrogens that exert relevant neuroprotective functions. Aromatase is also expressed in neurons and glial cells of the central nervous system (CNS), including the retina. To further understand the role of Irs2 at the retinal level, we performed an immunocytochemical study in adult normoglycemic Irs2-deficient mice. For this aim, the retinal immunoexpression of neuromodulators, such as aromatase, glutamine synthetase (GS), and tyrosine hydroxylase (TH) was analyzed, joint to a morphometric and planimetric study of the retinal layers. Comparing with wild-type (WT) control mice, the Irs2-knockout (Irs2-KO) animals showed a significant increase in the immunopositivity to aromatase in almost all of the retinal layers. Besides, Irs2-KO mice exhibited a decreased immunopositive reaction for GS and TH, in Müller and amacrine cells, respectively; morphological variations were also found in these retinal cell types. Furthermore, the retina of Irs2-KO mice displayed alterations in the structural organization, and a generalized decrease in the retinal thickness was observed in each of the layers, except for the inner nuclear layer. Our findings suggest that the absence of Irs2 induces retinal neurodegenerative changes in Müller and amacrine cells that are unrelated to hyperglycemia. Accordingly, in the Irs2-KO mice, the increased retinal immunocytochemical reactivity of aromatase could be associated with an attempt to repair such neural retina injuries by promoting local neuroprotective mediators.

Fabrication and Characterization of PEEK/PEI Multilayer Composites.

Polyetheretherketone (PEEK)/polyetherimide (PEI) blends (50/50, v/v) keeping the crystal phase of PEEK have been manufactured by alternate PEEK/PEI layer stacking. This strategy avoided the complete miscibility of both polymers, keeping layers of PEEK and PEI unmixed along the sample thickness, as well as promoting the formation of a smooth interfacial layer where PEEK and PEI were mixed. The properties of this interface after processing at molten state and different times was studied by DSC, DMA, and X-Ray synchrotron. These techniques allowed monitoring the evolution of glass transition, where isolated Tg's for both pristine polymers were observed even after long processing time. PEEK crystallinity slightly decreased during manufacturing, whereas PEEK crystal parameters did not vary. These observations show that, although the interface-the zone where both polymers are mixed-grew, layers with pristine polymers remained even after prolonged processing time. The preservation of the PEEK crystallinity was also observed in the mechanical properties of the multilayer PEEK/PEI films, which were compared with pristine PEEK and PEI films. Multilayer samples processed for shorter times rendered higher young modulus, tensile strength, and strain at break.

Polycarbonate/Sulfonamide Composites with Ultralow Contents of Halogen-Free Flame Retardant and Desirable Compatibility.

A novel halogen-free flame retardant containing sulfonamide, 1,3,5,7-tetrakis (phenyl-4-sulfonamide) adamantane (FRSN) was synthesized and used for improving the flame retardancy of largely used polycarbonate (PC). The flame-retardant properties of the composites with incorporation of varied amounts of FRSN were analyzed by techniques including limited oxygen index, UL 94 vertical burning, and cone calorimeter tests. The new FR system with sulfur and nitrogen elements showed effective improvements in PC's flame retardancy: the LOI value of the modified PC increased significantly, smoke emission suppressed, and UL 94 V-0 achieved. Typically, the composite with only 0.08 wt% of FRSN added (an ultralow content) can increase the limiting oxygen index (LOI) value to 33.7% and classified as UL 94 V-0 rating. Furthermore, the mechanical properties and SEM morphology indicated that the FRSN has very good compatibility with PC matrix, which, in turn, is beneficial to the property enhancement. Finally, the analysis of sample residues after burning tests showed that a high portion of char was formed, contributing to the PC burning protection. This synthesized flame retardant provides a new way of improving PC's flame retardancy and its mechanical property.

Production of graphene nanoplate/polyetheretherketone composites by semi-industrial melt-compounding.

Current studies on nanocomposites have focused on their multifunctional properties and their industrial production. In this work, polyetheretherketone (PEEK)/graphene nanoplate (GNP) composites were produced by a direct semi-industrial process. Different percentages of untreated GNP (1, 5, and 10 wt.%) were added to PEEK by employing melt-compounding followed by injection-moulding. Despite the semi-industrial approach used, the modulus, strength, and Poisson coefficient of the nanocomposites (1 and 5 wt.%) were not significantly affected by the addition of GNP. However, there was a slight decrease in the strength at 10 wt.% GNP. Our study also shows that the thermal conductivities of PEEK/GNP composites are up to 2.5 times higher than that of pure PEEK.

Long-living and highly efficient bio-hybrid light-emitting diodes with zero-thermal-quenching biophosphors.

Bio-hybrid light-emitting diodes (Bio-HLEDs) based on color down-converting filters with fluorescent proteins (FPs) have achieved moderate efficiencies (50 lm/W) and stabilities (300 h) due to both thermal- and photo-degradation. Here, we present a significant enhancement in efficiency (~130 lm/W) and stability (>150 days) using a zero-thermal-quenching bio-phosphor design. This is achieved shielding the FP surface with a hydrophilic polymer allowing their homogenous integration into the network of a light-guiding and hydrophobic host polymer. We rationalize how the control of the mechanical and optical features of this bio-phosphor is paramount towards highly stable and efficient Bio-HLEDs, regardless of the operation conditions. This is validated by the relationships between the stiffness of the FP-polymer phosphor and the maximum temperature reached under device operation as well as the transmittance of the filters and device efficiency.

Exceptionally Stable Microporous Organic Frameworks with Rigid Building Units for Efficient Small Gas Adsorption and Separation.

Three microporous organic frameworks (hereafter denoted as MPOF-Ads) based on a rigid adamantane core have been successfully synthesized via Sonogashira-Hagihara polycondensation coupling in high yields, 83.7-94.6%. The obtained amorphous MPOF-Ads networks have high Brunauer-Emmett-Teller surface areas (up to 737.3 m2 g-1), narrow pore size distribution (0.95-1.06 nm), and superior thermal (the initial decomposition temperature T5% under an N2 atmosphere can reach 410 °C) and chemical stability (no apparent degradation in common organic solvents or strong acid/base solutions after 7 days). At 273 K and 1.0 bar, these MPOF-Ads networks present good uptake capacities for small gas molecules (13.9 wt % CO2 and 1.66 wt % CH4) for which the presence of high surface area, predominant microporosity, and narrow pore size distribution are beneficial. In addition, the as-prepared MPOF-Ads networks possess moderate isosteric heats for CO2 (Qst = 19.5-30.3 kJ mol-1) and show desired CO2/N2 and CO2/CH4 selectivity (36.3-38.4 and 4.1-4.3 based on Henry's law and 17.88-24.92 and 4.24-5.70 based on ideal adsorbed solution theory, respectively). With the demonstrated properties, the synthesized MPOF-Ads networks display potential for small gas storage and separation that can be used in harsh environments because of their superior physical and chemical stability.

Supramolecular Assembly of Oriented Spherulitic Crystals of Conjugated Polymers Surrounding Carbon Nanotube Fibers.

The directed assembly of conjugated polymers into macroscopic organization with controlled orientation and placement is pivotal in improving device performance. Here, the supramolecular assembly of oriented spherulitic crystals of poly(3-butylthiophene) surrounding a single carbon nanotube fiber under controlled solvent evaporation of solution-cast films is reported. Oriented lamellar structures nucleate on the surface of the nanotube fiber in the form of a transcrystalline interphase. The factors influencing the formation of transcrystals are investigated in terms of chemical structure, crystallization temperature, and time. Dynamic process measurements exhibit the linear growth of transcrystals with time. Microstructural analysis of transcrystals reveals individual lamellar organization and crystal polymorphism. The form II modification occurs at low temperatures, while both form I and form II modifications coexist at high temperatures. A possible model is presented to interpret transcrystallization and polymorphism.

Non-Isothermal Crystallization Behavior of PEEK/Graphene Nanoplatelets Composites from Melt and Glass States.

The effect of the graphene nanoplateletets (GNP), at concentration of 1, 5 and 10 wt %, in Poly ether ether ketone (PEEK) composite crystallization from melt and during cold crystallization were investigated by differential scanning calorimetry (DSC) and real time X-ray diffraction experiments. DSC results revealed a double effect of GNP: (a) nucleating effect crystallization from melt started at higher temperatures and (b) longer global crystallization time due to the restriction in the polymer chain mobility. This hindered mobility were proved by rheological behavior of nanocomposites, because to the increase of complex viscosity, G', G″ with the GNP content, as well as the non-Newtonian behavior found in composites with high GNP content. Finally, real time wide and small angle synchrotron X-ray radiation (WAXS/SAXS) X-ray measurements showed that GNP has not affected the orthorhombic phase of PEEK nor the evolution of the crystal phase during the crystallization processes. However, the correlation length of the crystal obtained by WAXS and the long period (L) by SAXS varied depending on the GNP content.

Understanding the Mechanism of Antidepressant-Related Sexual Dysfunction: Inhibition of Tyrosine Hydroxylase in Dopaminergic Neurons after Treatment with Paroxetine but Not with Agomelatine in Male Rats.

Antidepressant-related sexual dysfunction is a frequent adverse event caused by serotonergic activation that intensely affects quality of life and adherence in depressed patients. The dopamine system has multiple effects promoting sexual behavior, but no studies have been carried out to confirm dopaminergic changes involved in animal models after antidepressant use. METHODS: The sexual behavior-related dopaminergic system in the rat was studied by comparing two different antidepressants and placebo for 28 days. The antidepressants used were paroxetine (a serotonergic antidepressant that causes highly frequent sexual dysfunction in humans) and agomelatine (a non-serotonergic antidepressant without associated sexual dysfunction). The tyrosine hydroxylase immunoreactivity (THI) in the substantia nigra pars compacta, the ventral tegmental area, the zona incerta, and the hypothalamic arcuate nucleus, as well as the dopaminergic projections to the striatum, hippocampus, cortex, and median eminence were analyzed. RESULTS: The THI decreased significantly in the substantia nigra and ventral tegmental area after treatment with paroxetine, and the labeling was reduced drastically in the zona incerta and mediobasal hypothalamus. The immunoreactive axons in the target regions (striatum, cortex, hippocampus, and median eminence) almost disappeared only in the paroxetine-treated rats. Conversely, after treatment with agomelatine, a moderate reduction in immunoreactivity in the substantia nigra was found without appreciable modifications in the ventral tegmental area, zona incerta, and mediobasal hypothalamus. Nevertheless, no sexual or copulatory behavior was observed in any of the experimental or control groups. CONCLUSION: Paroxetine but not agomelatine was associated with important decreased activity in dopaminergic areas such as the substantia nigra and ventral tegmental areas that could be associated with sexual performance impairment in humans after antidepressant treatment.