Understanding the Structure-Function Relationship through 3D Imaging and Biomechanical Analysis: A Novel Methodological Approach Applied to Anterior Cruciate Ligaments.

Understanding the microstructure of fibrous tissues, like ligaments, is crucial due to their nonlinear stress-strain behavior from unique fiber arrangements. This study introduces a new method to analyze the relationship between the microstructure and function of anterior cruciate ligaments (ACL). We tested the procedure on two ACL samples, one from a healthy individual and one from an osteoarthritis patient, using a custom tensioning device within a micro-CT scanner. The samples were stretched and scanned at various strain levels (namely 0%, 1%, 2%, 3%, 4%, 6%, 8%) to observe the effects of mechanical stress on the microstructure. The micro-CT images were processed to identify and map fibers, assessing their orientations and volume fractions. A probabilistic mathematical model was then proposed to relate the geometric and structural characteristics of the ACL to its mechanical properties, considering fiber orientation and thickness. Our feasibility test indicated differences in mechanical behavior, fiber orientation, and volume distribution between ligaments of different origins. These indicative results align with existing literature, validating the proposed methodology. However, further research is needed to confirm these preliminary observations. Overall, our comprehensive methodology shows promise for improving ACL diagnosis and treatment and for guiding the creation of tissue-engineered grafts that mimic the natural properties and microstructure of healthy tissue, thereby enhancing integration and performance in biomedical applications.

Nanomechanical Mapping of Three Dimensionally Printed Poly-ε-Caprolactone Single Microfibers at the Cell Scale for Bone Tissue Engineering Applications.

Poly-ε-caprolactone (PCL) has been widely used in additive manufacturing for the construction of scaffolds for bone tissue engineering. However, its use is limited by its lack of bioactivity and inability to induce cell adhesion, hence limiting bone tissue regeneration. Biomimicry is strongly influenced by the dynamics of cell-substrate interaction. Thus, characterizing scaffolds at the cell scale could help to better understand the relationship between surface mechanics and biological response. We conducted atomic force microscopy-based nanoindentation on 3D-printed PCL fibers of ~300 µm thickness and mapped the near-surface Young's modulus at loading forces below 50 nN. In this non-disruptive regime, force mapping did not show clear patterns in the spatial distribution of moduli or a relationship with the topographic asperities within a given region. Remarkably, we found that the average modulus increased linearly with the logarithm of the strain rate. Finally, a dependence of the moduli on the history of nanoindentation was demonstrated on locations of repeated nanoindentations, likely due to creep phenomena capable of hindering viscoelasticity. Our findings can contribute to the rational design of scaffolds for bone regeneration that are capable of inducing cell adhesion and proliferation. The methodologies described are potentially applicable to various tissue-engineered biopolymers.

Medial Meniscal Posterior Horn Suturing Influences Tibial Internal-External Rotation in ACL-Reconstructed Knees.

Background: The role of meniscal lesions and repair in combination with anterior cruciate ligament (ACL) injury and reconstruction has not been extensively investigated in vivo and under weightbearing conditions. Purpose: The purposes of this study were to (1) compare the in vivo knee kinematics between patients with ACL tear and those with combined ACL and medial meniscal tears and (2) investigate kinematic differences between isolated ACL reconstruction and ACL reconstruction plus medial meniscal repair (MR). It was hypothesized that concomitant posterior horn medial meniscal tear and ACL deficiency would affect knee internal-external rotation and anterior-posterior translation but MR would restore these parameters. Study Design: Controlled laboratory study. Methods: Nineteen patients who underwent ACL reconstruction were included: 10 had intact menisci (IM group) and 9 had a medial meniscal injury that was repaired during ACL reconstruction using an all-inside technique (MR group). Preoperatively and 18 months postoperatively, active knee kinematics under weightbearing conditions was evaluated during a single-leg squat using a dynamic biplane x-ray imaging system. The general linear model was used to investigate the differences between group (IM vs MR) and time (preoperative vs follow-up) and their interactions. Results: Tibial internal rotation was higher in the MR group than the IM group both before and after surgery (P = .007). Knee valgus rotation was higher in the MR group preoperatively (P < .001), while no differences were found postoperatively because of an increase of valgus rotation in the IM group, which was significant in the descendant phase (P < .001). Preoperatively, the IM group showed a more medial tibial translation compared with the MR group in the descendant phase (P = .006). Conclusion: When performing a single-leg squat, patients with ACL-deficient knees and a medial meniscal tear demonstrated a more valgus rotation, tibial internal rotation, and lateral tibial translation versus those with intact menisci. After ACL reconstruction and MR, these patients demonstrated significantly higher tibial internal rotation when compared with patients who underwent isolated ACL reconstruction. Clinical Relevance: Surgeons should be aware that MR does not fully restore knee kinematics in vivo and under weightbearing conditions in the context of ACL reconstruction.

Near-Surface Nanomechanics of Medical-Grade PEEK Measured by Atomic Force Microscopy.

Detecting subtle changes of surface stiffness at spatial scales and forces relevant to biological processes is crucial for the characterization of biopolymer systems in view of chemical and/or physical surface modification aimed at improving bioactivity and/or mechanical strength. Here, a standard atomic force microscopy setup is operated in nanoindentation mode to quantitatively mapping the near-surface elasticity of semicrystalline polyether ether ketone (PEEK) at room temperature. Remarkably, two localized distributions of moduli at about 0.6 and 0.9 GPa are observed below the plastic threshold of the polymer, at indentation loads in the range of 120-450 nN. This finding is ascribed to the localization of the amorphous and crystalline phases on the free surface of the polymer, detected at an unprecedented level of detail. Our study provides insights to quantitatively characterize complex biopolymer systems on the nanoscale and to guide the optimal design of micro- and nanostructures for advanced biomedical applications.

Clinical and Pathological Profiles of Vertebral Bone Metastases from Endometrial Cancers: Evidence from a Twenty-Year Case Series.

Patients with endometrial cancer (EC) frequently have metastases to lungs, extra-pelvic nodes, and liver. Although an uncommon occurrence, cases of EC metastasis to bone, prevalently in vertebral bone, have also been reported. The objective of this study was to analyze clinical and pathological profiles of patients with EC metastatic to vertebral bone. We carried out a retrospective case series on surgically treated patients for this pathology. From 2001 to 2021, out of 775 patients with bone metastasis, 1.6% had bone metastasis from EC. The median time between the diagnosis of primary tumor and that of bone metastases was 31.5 months. Solitary bone lesion was present in 7 patients and lumbar vertebrae were the segments most affected. Pathological fractures in 46.2% of patients and spinal pain in all were present. In terms of location, 46.2% of bone metastases resided within the anterior section of the vertebra, while the remaining presented an extension within the anterior and posterior sections, with 46.1% of cases showing an extradural extra-osseous extension and paraspinous envelope. Median survival after diagnosis of bone metastasis was 11.5 months. Vertebral bone metastasis in EC is a rare phenomenon, with severe prognosis. An in-depth understanding of this topic may guide future management and treatment decisions, thus improving life expectancy and quality.

Nanomechanical Mapping of Hard Tissues by Atomic Force Microscopy: An Application to Cortical Bone.

Force mapping of biological tissues via atomic force microscopy (AFM) probes the mechanical properties of samples within a given topography, revealing the interplay between tissue organization and nanometer-level composition. Despite considerable attention to soft biological samples, constructing elasticity maps on hard tissues is not routine for standard AFM equipment due to the difficulty of interpreting nanoindentation data in light of the available models of surface deformation. To tackle this issue, we proposed a protocol to construct elasticity maps of surfaces up to several GPa in moduli by AFM nanoindentation using standard experimental conditions (air operation, nanometrically sharp spherical tips, and cantilever stiffness below 30 N/m). We showed how to process both elastic and inelastic sample deformations simultaneously and independently and quantify the degree of elasticity of the sample to decide which regime is more suitable for moduli calculation. Afterwards, we used the frequency distributions of Young's moduli to quantitatively assess differences between sample regions different for structure and composition, and to evaluate the presence of mechanical inhomogeneities. We tested our method on histological sections of sheep cortical bone, measuring the mechanical response of different osseous districts, and mapped the surface down to the single collagen fibril level.

Over-constrained kinematic of the medial compartment leads to lower clinical outcomes after total knee arthroplasty.

PURPOSE: To investigate if postoperative clinical outcomes correlate with specific kinematic patterns after total knee arthroplasty (TKA) surgery. The hypothesis was that the group of patients with higher clinical outcomes would have shown postoperative medial pivot kinematics, while the group of patients with lower clinical outcomes would have not. METHODS: 52 patients undergoing TKA surgery were prospectively evaluated at least a year of follow-up (13.5 ± 6.8 months) through clinical and functional Knee Society Score (KSS), and kinematically through dynamic radiostereometric analysis (RSA) during a sit-to-stand motor task. Patients received posterior-stabilized TKA design. Based on the result of the KSS, patients were divided into two groups: "KSS > 70 group", patients with a good-to-excellent score (93.1 ± 6.8 points, n = 44); "KSS < 70 group", patients with a fair-to-poor score (53.3 ± 18.3 points, n = 8). The anteroposterior (AP) low point (lowest femorotibial contact points) translation of medial and lateral femoral compartments was compared through Student's t test (p < 0.05). RESULTS: Low point AP translation of the medial compartment was significantly lower (p < 0.05) than the lateral one in both the KSS > 70 (6.1 mm ± 4.4 mm vs 10.7 mm ± 4.6 mm) and the KSS < 70 groups (2.7 mm ± 3.5 mm vs 11.0 mm ± 5.6 mm). Furthermore, the AP translation of the lateral femoral compartment was not significantly different (p > 0.05) between the two groups, while the AP translation of the medial femoral compartment was significantly higher for the KSS > 70 group (p = 0.0442). CONCLUSION: In the group of patients with a postoperative KSS < 70, the medial compartment translation was almost one-fourth of the lateral one. Surgeons should be aware that an over-constrained kinematic of the medial compartment might lead to lower clinical outcomes. LEVEL OF EVIDENCE: II.

Semi-empirical anticoagulation model (SAM): INR monitoring during Warfarin therapy.

The International Normalized Ratio (INR) monitoring is an essential component to manage thrombotic disease therapy. This study presents a semi-empirical model of INR as a function of time and assigned therapy (Warfarin, k-vitamin). With respect to other methodologies, this model is able to describe the INR using a limited number of parameters and is able to describe the time variation of INR described in the literature. The presented methodology showed great accuracy in model calibration [(trueness (precision)]: 0.2% (0.1%) to 1.2% (0.3%) for coagulation factors, from 5% (9%) to 9.7% (12%) for Warfarin-related parameters and 38% (40%) for K-vitamin-related parameters. The latter value was considered acceptable given the assumptions made in the model. It has two other important results: the first is that it was able to correctly estimate INR with respect to daily therapy doses taken from the literature. The second is that it introduces a single numeric semi-empirical parameter that is able to correlate INR/dose response to physiological and environmental condition of patients.

Dynamic Radiostereometry Evaluation of 2 Different Anterior Cruciate Ligament Reconstruction Techniques During a Single-Leg Squat.

BACKGROUND: Lateral extra-articular tenodesis in the context of anterior cruciate ligament (ACL) reconstruction (ACLR) is performed to better control anterolateral knee instability in patients with high-grade preoperative pivot shift. However, some authors believe these procedures may cause lateral compartment overconstraint, affecting knee motion in daily life. PURPOSE/HYPOTHESIS: The primary aim of the present study was to identify kinematic differences during the execution of an activity under weightbearing conditions between knees having undergone ACLR using anatomic single-bundle (SB) versus single-bundle plus lateral plasty (SBLP) techniques. The secondary aim was to compare the postoperative kinematic data with those from the same knees before ACLR and from the healthy contralateral knees in order to investigate if ACLR was able to restore physiologic knee biomechanics during squat execution. The hypotheses were that (1) the SBLP technique would allow a better restoration of internal-external (IE) knee rotation than would SB and (2) regardless of the technique, ACLR would not fully restore physiologic knee biomechanics. STUDY DESIGN: Randomized controlled trial; Level of evidence, 2. METHODS: In total, 32 patients (42 knees) were included in the study. Patients were asked to perform a single-leg squat before surgery (ACL-injured group, n = 32; healthy contralateral group, n = 10) and at minimum 18-month follow-up after ACLR (SB group, n = 9; SBLP group, n = 18). Knee motion was determined using a validated model-based tracking process that matched patient-specific magnetic resonance imaging bone models to dynamic biplane radiographic images under the principles of roentgen stereophotogrammetric analysis. Data processing was performed using specific software. The authors compared IE and varus-valgus rotations and anterior-posterior and medial-lateral translations among the groups. RESULTS: The mean follow-up period was 21.7 ± 4.5 months. No kinematic differences were found between the SB and SBLP groups (P > .05). A more medial tibial position (P < .05) of the ACL-injured group was reported during the entire motor task and persisted after ACLR in both the SB and the SBLP groups. Differences in IE and varus-valgus rotations were found between the ACL-injured and healthy groups. CONCLUSION: There were no relevant kinematic differences between SBLP and anatomic SB ACLR during the execution of a single-leg squat. Regardless of the surgical technique, ACLR failed in restoring knee biomechanics. REGISTRATION: NCT02323386 (ClinicalTrials.gov identifier).

Knee position at the moment of bone bruise could reflect the late phase of non-contact anterior cruciate ligament injury rather than the mechanisms leading to ligament failure.

PURPOSE: The aim of the present study was to trace knee position at the time of bone bruise (BB) and investigate how much this position departed from the knee biomechanics of an in vivo flexion-extension. METHODS: From an original cohort of 62 patients, seven (11%) presented bicompartmental edemas and were included in the study. 3D models of bones and BB were obtained from MRI. Matching bone edemas, a reconstruction of the knee at the moment of BB was obtained. For the same patients, knee kinematics of a squat was calculated using dynamic Roentgen sterephotogrammetric analysis (RSA). Data describing knee position at the moment of BB were compared to kinematics of the same knee extrapolated from RSA system. RESULTS: Knee positions at the moment of BB was significantly different from the kinematics of the squat. In particular, all the patients' positions were out of squat range for both anterior and proximal tibial translation, varus-valgus rotation (five in valgus and two in varus), tibial internal-external rotation (all but one, five externally and one internally). A direct comparison at same flexion angle between knee at the moment of BB (average 46.1° ± 3.8°) and knee during squat confirmed that tibia in the former was significantly more anterior (p < 0.0001), more externally rotated (6.1 ± 3.7°, p = 0.04), and valgus (4.1 ± 2.4°, p = 0.03). CONCLUSION: Knee position at the moment of Bone bruise position was out of physiological in-vivo knee range of motion and could reflect a locked anterior subluxation occurring in the late phase of ACL injury rather than the mechanism leading to ligament failure. LEVEL OF EVIDENCE: Level IV.

ACL deficiency influences medio-lateral tibial alignment and knee varus-valgus during in vivo activities.

PURPOSE: The role of the anterior cruciate ligament (ACL) in knee biomechanics in vivo and under weight-bearing is still unclear. The purpose of this study was to compare the tibiofemoral kinematics of ACL-deficient knees to healthy contralateral ones during the execution of weight-bearing activities. METHODS: Eight patients with isolated ACL injury and healthy contralateral knees were included in the study. Patients were asked to perform a single step forward and a single leg squat first with the injured knee and then with the contralateral one. Knee motion was determined using a validated model-based tracking process that matched subject-specific MRI bone models to dynamic biplane radiographic images, under the principles of Roentgen stereophotogrammetric analysis (RSA). Data processing was performed in a specific software developed in Matlab. RESULTS: Statistically significant differences (p < 0.05) were found for single leg squat along the frontal plane: ACL-deficient knees showed a more varus angle, especially at the highest knee flexion angles (40°-50° on average), compared to the contralateral knees. Furthermore, ACL-deficient knees showed tibial medialization along the entire task, while contralateral knees were always laterally aligned. This difference became statistically relevant (p < 0.05) for knee flexion angles included between 0° and about 30°. CONCLUSION: ACL-deficient knees showed an abnormal tibial medialization and increased varus angle during single leg squat when compared to the contralateral knees. These biomechanical anomalies could cause a different force distribution on tibial plateau, explaining the higher risk of early osteoarthritis in ACL deficiency. The clinical relevance of this study is that also safe activities used in ACL rehabilitation protocols are significantly altered in ACL deficiency. LEVEL OF EVIDENCE: III.

In vivo femorotibial kinematics of medial-stabilized total knee arthroplasty correlates to post-operative clinical outcomes.

PURPOSE: To evaluate if there was a correlation between in vivo kinematics of a medial-stabilized (MS) total knee arthroplasty (TKA) and post-operative clinical scores. We hypothesized that (1) a MS-TKA would produce a medial pivot movement and that (2) this specific pattern would be correlated with higher clinical scores. METHODS: 18 patients were evaluated through clinical and functional scores evaluation (Knee Society Score clinical and functional, Womac, Oxford), and kinematically through dynamic radiostereometric analysis (RSA) at 9 months after MS-TKA, during the execution of a sit-to-stand and a lunge motor task. The anteroposterior (AP) Low Point translation of medial and lateral femoral compartments was compared through Student's t test (p < 0.05). A correlation analysis between scores and kinematics was performed through the Pearson's correlation coefficient r. RESULTS: A significantly greater (p < 0.0001) anterior translation of the lateral compartment with respect to the medial one was found in both sit-to-stand (medial 2.9 mm ± 0.7 mm, lateral 7.1 mm ± 0.6 mm) and lunge (medial 5.3 mm ± 0.9 mm, lateral 10.9 mm ± 0.7 mm) motor tasks, thus resulting in a medial pivot pattern in about 70% of patients. Significant positive correlation in sit-to-stand was found between the peak of AP translation in the lateral compartment and clinical scores (r = 0.59 for Knee Society Score clinical and r = 0.61 for Oxford). Moreover, we found that the higher peak of AP translation of the medial compartment correlated with lower clinical scores (r = - 0.55 for Knee Society Score clinical, r = - 0.61 for Womac and r = - 0.53 for Oxford) in the lunge. A negative correlation was found between Knee Society Score clinical and VV laxity during sit-to-stand (r = - 0.56) and peak of external rotation in the lunge motor task (r = - 0.66). CONCLUSIONS: The MS-TKA investigated produced in vivo a medial pivot movement in about 70% of patients in both examined motor tasks. There was a correlation between the presence of medial pivot and higher post-operative scores. LEVEL OF EVIDENCE: IV.

Multi-radius posterior-stabilized mobile-bearing total knee arthroplasty partially produces in-vivo medial pivot during activity of daily living and high demanding motor task.

PURPOSE: The purpose of the present study was to assess the kinematical behavior of a multi-radius posterior-stabilized (PS) mobile-bearing (MB) total knee arthroplasty (TKA) during an activity of daily living (Sit-To-Stand-STS) and a high demanding motor task (Deep-Knee-Lunge-DKL) using model-based dynamic RSA. We hypothesized the achievement of medial pivoting movement in both motor tasks due to the congruent geometry of the inlay with the femoral component, which should allow good stability of the medial compartment, and to the high magnitude of rotations guaranteed by the MB on the tibial side. METHODS: Twenty-two randomly selected patients were recruited and prospectively evaluated. The PS MB cemented TKA was implanted with the standard technique (medial parapatellar approach, adjusted mechanical alignment). At minimum 9-month follow-up, patients were examined with model based Dynamic RSA developed in our Institute (BI-STAND DRX 2) during the execution of two motor tasks: STS and DKL. The motion parameters were evaluated using the Grood and Suntay decomposition and the low-point kinematics methods. RESULTS: In the extension phase of DKL femur performed a greater antero posterior translation of 3.8 mm compared to STS between 0° and 20° of knee flexion (p < 0.05). Low-point analysis showed a medial pivoting movement in both motor tasks: in 62% of patients during STS and 48% during DKL. Varus-valgus rotations were lower than 1° during all the range-of-motion in both motor tasks without differences. CONCLUSIONS: Medial pivot was partially produced by this multi-radius PS MB TKA with some differences during activity of daily living (STS) and high demanding motor task (DKL). LEVEL OF EVIDENCE: IV.

J-curve design total knee arthroplasty: the posterior stabilized shows wider medial pivot compared to the cruciate retaining during chair raising.

PURPOSE: Which total knee arthroplasty (TKA) design represents the better solution to restore a correct knee biomechanics is still debated. The aim of this study was to compare posterior stabilized (PS) and cruciate retaining (CR) version of the same TKA design (femoral component with an anatomic sagittal radius-J-curve design) by the use of dynamic Roentgen stereophotogrammetric analysis (RSA). The hypothesis was that the two models influence differently in vivo knee kinematic. METHODS: A cohort of 16 randomly selected patients was evaluated 9 months after surgery: Zimmer PERSONA® was implanted, eight with CR design and eight with PS design. The kinematic evaluations were performed using a Dynamic RSA (BI-STAND DRX 2) developed in our Institute, during the execution of the sit-to-stand motor task. The motion parameters were obtained using the Grood and Suntay decomposition and the low-point kinematics methods. RESULTS: PS TKA lateral femoral compartment had a wider anterior translation (17 ± 2 mm) than the medial one (11 ± 2 mm), while the two compartments of CR TKA showed a similar anterior translation (medial: 9 ± 2 mm/lateral: 11 ± 2 mm). T test for comparison between CR and PS TKA of antero-posterior translation showed a statistically significant difference (p < 0.05) in the flexion range between 15° and 40°. The CR prosthesis did not anteriorly translate during flexion. The PS design translated anteriorly showing a roll-forward mechanism during extension from 80° to 18° of flexion and a posterior translation from 18° to 0°. The same significant differences (p < 0.05) between the PS and CR groups were found comparing the low-point positions of the femoral condyles in the range of flexion between 25° and 40° for the medial compartment and between 15° and 25° for the lateral compartment. CONCLUSIONS: Dynamic RSA was able to investigate for the first time in vivo the kinematic behaviour of PS and CR version of the same TKA J-curve design. PS type showed a medial pivot during sit-to-stand motion task, while the CR type showed a cylindrical movement. Further studies are needed to evaluate the impact of different TKA designs on clinical results. LEVEL OF EVIDENCE: IV.

Knee kinematics after cruciate retaining highly congruent mobile bearing total knee arthroplasty: An in vivo dynamic RSA study.

PURPOSE: This work presents a kinematic evaluation of a cruciate retaining highly congruent mobile bearing total knee arthroplasty design using dynamic Roentgen sterephotogrammetric analysis. The aim was to understand the effect of this implant design on the kinematics of prosthetic knees during dynamic activities. METHODS: A cohort of 15 patients was evaluated at nine month follow-up after surgery. The mean age was 74.8 (range 66-85) years. The kinematics was evaluated using the Grood and Suntay decomposition and the Low-Point (LP) methods. RESULTS: ?tlsb=-0.15pt?>From sitting to standing up position, the femoral component internally rotated (from -11.3 ±â€¯0.2° to -7.0 ±â€¯0.2°). Varus-valgus rotations were very close to 0° during the whole motor task. LP of medial condyle moved from an anterior position of 12.0 ±â€¯0.2 mm to a posterior position of -12.4 ±â€¯0.2 mm; LP of the lateral condyle moved from an anterior position of 8.1 ±â€¯0.2 mm to a posterior position of -12.4 ±â€¯0.2 mm, showing a bi-condylar rollback where both condyles moved parallel backward. Moreover, the femoral component showed anterior translation with respect to the tibia from 80° to 20° (from -4.9 ±â€¯0.2 mm to 3.3 ±â€¯0.2 mm), then a posterior translation from 20° to full extension was identified (from 3.3 ±â€¯0.2 mm to 0.5 ±â€¯0.2 mm). CONCLUSIONS: Paradoxical anterior femoral translation and absence of medial-pivoting motion were recorded, highlighting the role of the symmetric deep dishes insert as main driver of the kinematic of this TKA design.

New design total knee arthroplasty shows medial pivoting movement under weight-bearing conditions.

PURPOSE: To assess, using model-based dynamic radiostereometric analysis (RSA), the biomechanical behaviour of a new design posterior-stabilized (PS) fixed-bearing (FB) total knee arthroplasty (TKA) in vivo while patients performing two common motor tasks. The hypothesis was that model-based dynamic RSA is able to detect different behaviour of the implant under weight-bearing and non-weight-bearing conditions. METHODS: A cohort of 15 non-consecutive patients was evaluated by dynamic RSA 9 months after TKA implantation. The mean age of patients was 73.4 (65-72) years. The kinematic evaluations were performed using an RSA device (BI-STAND DRX 2) developed in our Institute. The patients were asked to perform two active motor tasks: sit-to-stand in weight-bearing condition; range of motion (ROM) while sitting on the chair. The motion parameters were evaluated using the Grood and Suntay decomposition and the low-point kinematics methods. RESULTS: The dynamic RSA evaluation showed a significant difference (p < 0.05) between the biomechanical behaviour of the prosthesis during the two motor tasks. When subjected to the patient weight (in the sit-to-stand) the low point of the medial compartment had a shorter motion (5.7 ± 0.2 mm) than the lateral (11.0 ± 0.2 mm). This realizes a medial pivot motion as in the normal knee. In the ROM task, where the patient had no weight on the prosthesis, this difference was not present: the medial compartment had a displacement of 12.7 ± 0.2 mm, while the lateral had 17.3 ± 0.2 mm. CONCLUSIONS: Model-based RSA proved to be an effective tool for the evaluation of TKA biomechanics. In particular, it was able to determine that the fixed-bearing posterior-stabilized TKA design evaluated in this study showed a medial pivoting movement under weight-bearing conditions that was not present when load was not applied. Under loading conditions what drives the pattern of movement is the prosthetic design itself. By the systematic use of this study protocol future comparisons among different implants could be performed, thus contributing significantly to the improvement of TKA design. LEVEL OF EVIDENCE: IV.

A proposal to evaluate the fibers' break probability in ligaments and tendons.

Understanding the yield and failure mechanisms of ligaments and tendons is important to have a deeper knowledge of their structure and function. Evaluating what are the limits of the human body is also important to prevent injuries in workers, in athletes and the elderly. The tissue yield mechanism was analyzed by modifying and extending a probabilistic model of collagen bundles. Since not usable experimental data are available in the literature, the model and the method were tested using Monte Carlo simulations. The simulations showed many crucial aspects of the model and gave some indications about possible future real validation experiments. The analysis of the correlation between the simulated data, the model (R2) and the Signal-to-Noise-Ratio (SNR) highlighted the most important parameters that affect effectiveness of the described method: number of fibers, elongation step, noise. This analysis also showed that the numerical differentiation algorithms of the data have a key role on the accuracy of the yield assessment. However, the results also showed that the method is able to correctly estimate the elongation break distribution of the fibers of ligaments and tendons.

Evaluation of RSA set-up from a clinical biplane fluoroscopy system for 3D joint kinematic analysis.

PURPOSE: dinamic roentgen stereophotogrammetric analysis (RSA), a technique currently based only on customized radiographic equipment, has been shown to be a very accurate method for detecting three-dimensional (3D) joint motion. The aim of the present work was to evaluate the applicability of an innovative RSA set-up for in vivo knee kinematic analysis, using a biplane fluoroscopic image system. To this end, the Authors describe the set-up as well as a possible protocol for clinical knee joint evaluation. The accuracy of the kinematic measurements is assessed. METHODS: the Authors evaluated the accuracy of 3D kinematic analysis of the knee in a new RSA set-up, based on a commercial biplane fluoroscopy system integrated into the clinical environment. The study was organized in three main phases: an in vitro test under static conditions, an in vitro test under dynamic conditions reproducing a flexion-extension range of motion (ROM), and an in vivo analysis of the flexion-extension ROM. For each test, the following were calculated, as an indication of the tracking accuracy: mean, minimum, maximum values and standard deviation of the error of rigid body fitting. RESULTS: in terms of rigid body fitting, in vivo test errors were found to be 0.10±0.05 mm. Phantom tests in static and kinematic conditions showed precision levels, for translations and rotations, of below 0.1 mm/0.2° and below 0.5 mm/0.3° respectively for all directions. CONCLUSIONS: the results of this study suggest that kinematic RSA can be successfully performed using a standard clinical biplane fluoroscopy system for the acquisition of slow movements of the lower limb. CLINICAL RELEVANCE: a kinematic RSA set-up using a clinical biplane fluoroscopy system is potentially applicable and provides a useful method for obtaining better characterization of joint biomechanics.

Semi-empirical model for fluorescence lines evaluation in diagnostic x-ray beams.

Diagnostic x-ray beams are composed of bremsstrahlung and discrete fluorescence lines. The aim of this study is the development of an efficient model for the evaluation of the fluorescence lines. The most important electron ionization models are analyzed and implemented. The model results were compared with experimental data and with other independent spectra presented in the literature. The implemented peak models allow the discrimination between direct and indirect radiation emitted from tungsten anodes. The comparison with the independent literature spectra indicated a good agreement.

Roentgen stereophotogrammetric analysis: an effective tool to predict implant survival after an all-poly unicompartmental knee arthroplasty-a 10 year follow-up study.

PURPOSE: The main purpose of the present study was to determine long-term implant fixation of 15 unicompartmental knee arthroplasty (UKAs) with an all-poly tibial component using Roentgen stereophotogrammetric analysis (RSA) at a mean 10-year follow-up. The secondary purpose was to investigate whether the progressive loss of implant's fixation correlates with a reduction in Knee society score (KSS). METHODS: Fifteen non-consecutive patients with primary knee osteoarthritis received a UKA with an all-poly tibial component were assessed using KSS scores pre-operatively and post-operatively and RSA on day 2 after surgery, then at 3, 6, and 12 months and yearly thereafter. The mean last follow-up was 10 years. RESULTS: An increase in maximum total point motion (MTPM) values from 6 months to 1 year post-operatively was found respect to post-operative reference. Implants' displacement values were always <2 mm during the first 6 months, and then, two different trends were noticed in revised and non-revised implants. MTPM increase between 1 and 2 years of follow-up in non-revised UKAs was always <0.2 mm, whereas it was >0.2 mm in revised UKAs. A linear and negative correlation with statistical significance was found between MTPM and both clinical and functional KSS scores (p < 0.001). CONCLUSION: Also in a long-term follow-up evaluation, RSA is an effective tool to predict functional results after an all-poly UKA providing also a relevant predictive value at 1 year follow-up, and this can be very useful for both patients and surgeons. LEVEL OF EVIDENCE: Diagnostic studies, Level III.