Applications of Thermochemical Modeling in Molten Salt Reactors.

The extensively evaluated and consistent thermodynamic database, the Molten Salt Thermal Properties Database-Thermochemical (MSTDB-TC), was used along with additional thermodynamic values from other sources as examples of ways to examine molten salt reactor (MSR) fuel behavior. Relative stability with respect to halide potential and temperature for likely fuel and fission product components were mapped in Ellingham diagrams for the chloride and fluoride systems. The Ellingham diagrams provide a rich, visual means for identifying halide-forming components in proposed fuel/solvent salt systems. Thermochemical models and values from MSTDB-TC and ancillary sources were used in global equilibrium calculations to provide compositions for a close analysis of the behavior of a possible Molten Chloride Salt Fast Reactor and a Molten Salt Reactor Experiment-type system at high burnup (100 GWd/t). The results illustrated the oxidative nature of burnup in MSRs and provided information about redox behavior and possible control.

Electrothermally Actuated Semitransparent Shape Memory Polymer Composite with Application as a Wearable Touch Sensor.

A semitransparent shape memory polymer (SMP):silver nanowire (AgNW) composite is demonstrated to be capable of low-temperature actuation, thus making it attractive for wearable electronics applications that require intimate contact with the human body. We demonstrate that the SMP:AgNW composite has tunable electrical and optical transparency through variation of the AgNW loading and that the AgNW loading did not significantly change the mechanical behavior of the SMP. The SMP composite is also capable of electrical actuation through Joule heating, where applying a 4 V bias across the AgNWs resulted in full shape recovery. The SMP was found to have high strain sensitivity at both small (<1%) and large (over 10%) applied strain. The SMP could sense strains as low as 0.6% with a gauge factor of 8.2. The SMP composite was then utilized as a touch sensor, able to sense and differentiate tapping and pressing. Finally, the composite was applied as a wearable ring that was thermally actuated to conformably fit onto a finger as a touch sensor. The ring sensor was able to sense finger tapping, pressing, and bending with high signal-to-noise ratios. These results demonstrate that SMP:AgNW composites are a promising design approach for application in wearable electronics.

Crystallization of A3Ln(BO3)2 (A = Na, K; Ln = Lanthanide) from a Boric Acid Containing Hydroxide Melt: Synthesis and Investigation of Lanthanide Borates as Potential Nuclear Waste Forms.

A series of alkali metal rare-earth borates were prepared via high-temperature flux crystal growth, and their structures were characterized by single crystal X-ray diffraction (SXRD). Na3Ln(BO3)2 (Ln = La-Lu) crystallize in the monoclinic space group P21/n, the potassium series K3Ln(BO3)2 (Ln = La-Tb) crystallize in the orthorhombic space group Pnma, while the Ln = Dy, Ho, Tm, Yb analogues crystallize in the orthorhombic space group Pnnm. To demonstrate the generality of this synthetic technique, high-entropy oxide (HEO) compositions K3Nd0.15(1)Eu0.20(1)Gd0.20(1)Dy0.22(1)Ho0.23(1)(BO3)2 and K3Nd0.26(1)Eu0.29(1)Ho0.22(1)Tm0.14(1)Yb0.10(1)(BO3)2 were obtained in single crystal form. Radiation damage investigations determined that these borates have a high radiation damage tolerance. To assess whether trivalent actinide analogues of Na3Ln(BO3)2 and K3Ln(BO3)2 would be stable, density functional theory was used to calculate their enthalpies of formation, which are favorable.

Dynamic Mechanical Analysis of Polymer Thin Films Using a Kirigami-Inspired Support.

A method of determining the mechanical relaxation behavior of polymer thin films is presented that employs a kirigami-inspired sample support. The film of interest is placed on the kirigami support and loaded into a dynamic mechanical analyzer. When the composite is placed in tension, the substrate effectively transfers the load to the film of interest. We demonstrate the approach using a number of polymers and conjugated polymer: small molecule blends relevant for organic photovoltaics. The kirigami-inspired method is found to provide an accurate view of thermal relaxation behavior in polymer thin films, including a quantitative assessment of the film storage modulus. The method is particularly valuable in thin films where film morphology is highly dependent on processing conditions. We show that differences in casting conditions have a clear impact on the thermal relaxation of both the neat and blend conjugated polymer films.