Photoelectrochemical glycerol oxidation on Mo-BiVO4 photoanodes shows high photocharging current density and enhanced H2 evolution.

Mo-doped BiVO4's lower efficiency can be attributed in part to exciton recombination losses. Recombination losses during photoelectrochemical water oxidation can be eliminated by using glycerol as a hole acceptor. This results in an enhanced photocurrent density. In this research, we present the synthesis of a Mo-doped BiVO4 photoelectrode with a greater photocurrent density than a traditional pristine photoanode system. Increased photon exposure duration in the presence of glycerol leads to 8 mA cm-2 increase in photocurrent density due to the creation of a capacitance layer and a decrease in charge transfer resistance on the photoelectrode in a neutral-phosphate buffer solution thus confirming the photo charging effect. Glycerol photooxidation improves the photoelectrode's rate of hydrogen evolution. Research into the effects of electrolyte and electrode potential on photoelectrodes has revealed that when the applied potential increases, the light absorbance behaviour changes following its absorption distribution over the applied potential. Under a transmission electron microscope (TEM), a unique dynamical crystal fringe pattern is found in the nanoparticles scratched from the photoelectrode.

Affinity-Driven Immobilization of Proteins to Hematite Nanoparticles.

Functional nanoparticles are valuable materials for energy production, bioelectronics, and diagnostic devices. The combination of biomolecules with nanosized material produces a new hybrid material with properties that can exceed the ones of the single components. Hematite is a widely available material that has found application in various sectors such as in sensing and solar energy production. We report a single-step immobilization process based on affinity and achieved by genetically engineering the protein of interest to carry a hematite-binding peptide. Fabricated hematite nanoparticles were then investigated for the immobilization of the two biomolecules C-phycocyanin (CPC) and laccase from Bacillus pumilus (LACC) under mild conditions. Genetic engineering of biomolecules with a hematite-affinity peptide led to a higher extent of protein immobilization and enhanced the catalytic activity of the enzyme.

A self-assembled, multicomponent water oxidation device.

Langmuir-Blodgett (LB) and drop-cast (DC) films prepared from [Ru(1)3][PF6]2 and Co4POM (1= 4,4'-bis((n)nonyl)-2,2'-bipyridine, Co4POM = K10[Co4(H2O)2(α-PW9O34)2]) have been evaluated as water oxidation catalysts and their electrocatalytic performances are reported; DC films evolve more O2 per unit area than LB films and the catalyst is stable on an FTO surface for ≈500-600 minutes.

Biological components and bioelectronic interfaces of water splitting photoelectrodes for solar hydrogen production.

Artificial photosynthesis (AP) is inspired by photosynthesis in nature. In AP, solar hydrogen can be produced by water splitting in photoelectrochemical cells (PEC). The necessary photoelectrodes are inorganic semiconductors. Light-harvesting proteins and biocatalysts can be coupled with these photoelectrodes and thus form bioelectronic interfaces. We expand this concept toward PEC devices with vital bio-organic components and interfaces, and their integration into the built environment.

An ultra-high vacuum electrochemical flow cell for in situ/operando soft X-ray spectroscopy study.

An in situ flow electrochemical cell has been designed and fabricated to allow better seal under UHV chamber thus to achieve a good signal to noise ratio in fluorescence yield detection of X-ray absorption spectra for spectroelectrochemical study. The cell also stabilizes the thin silicon nitride membrane window in an effective manner so that the liquid cell remains intact during X-ray absorption experiments. With the improved design of the liquid cell, electrochemical experiments such as cyclic voltammetry have been performed for 10 cycles with a good stability of sample window. Also an operando electrochemical experiment during photoelectrochemistry has been performed on n-type hematite electrode deposited on silicon nitride window. The experiment allows us to observe the formation of two extra electronic transitions before pre edge of O K-edge spectra.

Hematite-NiO/α-Ni(OH)2 heterostructure photoanodes with high electrocatalytic current density and charge storage capacity.

Control of the water splitting reaction in the context of natural photosynthesis is considered as a Holy Grail of chemistry, particularly with respect to artificial photosynthesis for a sustainable energy economy. The underlying objective is to build a solar fuel generator which is economically viable and environmentally benign. Hydrogen generation by solar water splitting in photoelectrochemical cells (PEC) is currently experiencing a renaissance, and the search for high performance but low-cost photoelectrode materials is an on-going quest. We present here a photoanode heterostructure of hematite and NiO/α-Ni(OH)2, which is very efficient. We prepared the heterostructure by a "two reactor" hydrothermal modification of a pristine hematite film. The system shows promising current density of 16 mA cm(-2), several times higher than that of the pristine hematite film. In addition, the system shows charge storing capacity once exposed to AM 1.5 simulated sunlight, along with electrochromic behaviour. Interestingly, the water splitting proceeds as a dark reaction after several hours of light exposure. The abrupt increase in current density originates from the oxidized Ni(OH)2 layer which is absent in the case of pn-junction-like devices made by mere deposition of NiO on hematite by thermal annealing. Hematite alone shows no such behaviour. This kind of new PEC electrode offers a low-cost and simple way for the dual purpose applications of water splitting and charge storage.

Formation of an electron hole doped film in the α-Fe2O3 photoanode upon electrochemical oxidation.

Solar hydrogen generation by water splitting in photoelectrochemical cells (PEC) is an appealing technology for a future hydrogen economy. Hematite is a prospective photoanode material in this respect because of its visible light conjugated band gap, its corrosion stability, its environmentally benign nature and its low cost. Its bulk and surface electronic structure has been under scrutiny for many decades and is considered critical for improvement of efficiency. In the present study, hematite films of nominally 500 nm thickness were obtained by dip-coating on fluorine doped tin oxide (FTO) glass slides and then anodised in 1 molar KOH at 500, 600, and 700 mV for 1, 10, 120 and 1440 minutes under dark conditions. X-ray photoelectron spectra recorded at the Fe 3p resonant absorption threshold show that the e(g) transition before the Fermi energy, which is well developed in the pristine hematite film, becomes depleted upon anodisation. The spectral weight of the e(g) peak decreases with the square-root of the anodisation time, pointing to a diffusion controlled process. The speed of this process increases with the anodisation potential, pointing to Arrhenius behaviour. Concomitantly, the weakly developed t(2g) peak intensity becomes enhanced in the same manner. This suggests that the surface of the photoanode contains Fe(2+) species which become oxidized toward Fe(3+) during anodisation. The kinetic behaviour derived from the experimental data suggests that the anodisation forms an electron hole doped film on and below the hematite surface.